Frying stability of soybean and canola oils with modified fatty acid compositions

Pilot plant-processed samples of soybean and canola (lowerucic acid rapeseed) oil with fatty acid compositions modified by mutation breeding and/or hydrogenation were evaluated for frying stability. Linolenic acid contents were 6.2% for standard soybean oil, 3.7% for low-linolenic soybean oil and 0.4% for the hydrogenated low-linolenic soybean oil. The linolenic acid contents were 10.1% for standard canola oil, 1.7% for canola modified by breeding and 0.8% and 0.6% for oils modified by breeding and hydrogenation. All modified oils had significantly (P<0.05) less room odor intensity after initial heating tests at 190°C than the standard oils, as judged by a sensory panel. Panelists also judged standard oils to have significantly higher intensities for fishy, burnt, rubbery, smoky and acrid odors than the modified oils. Free fatty acids, polar compounds and foam heights during frying were significantly (P<0.05) less in the low-linolenic soy and canola oils than the corresponding unmodified oils after 5 h of frying. The flavor quality of french-fried potatoes was significantly (P<0.05) better for potatoes fried in modified oils than those fried in standard oils. The potatoes fried in standard canola oil were described by the sensory panel as fishy.     

Low-linolenic acid soybean oil—Alternatives to frying oils

Oil was hexane-extracted from soybeans that had been modified by hybridization breeding for low-linolenic acid (18∶3) content. Extracted crude oils were processed to finished edible oils by laboratory simulations of commercial oil processing procedures. Oils from three germplasm lines N83-375 (5.5% 18∶3), N89-2009 (2.9% 18∶3) and N85-2176 (1.9% 18∶3) were compared to commercial unhydrogenated soybean salad oil with 6.2% 18∶3 and two hydrogenated soybean frying oils, HSBOI (4.1% 18∶3) and HSBOII (<0.2% 18∶3). Low-18∶3 oils produced by hybridization showed significantly lower room odor intensity scores than the commercial soybean salad oil and the commercial frying oils. The N85-2176 oil with an 18∶3 content below 2.0% showed no fishy odor after 10 h at 190°C and lower burnt and acrid odors after 20 h of use when compared to the commercial oils. Flavor quality of potatoes fried with the N85-2176 oil at 190°C after 10 and 20 h was good, and significantly better at both time periods than that of potatoes fried in the unhydrogenated oil or in the hydrogenated oils. Flavor quality scores of potatoes fried in the N89-2009 oil (2.9% 18∶3) after 10 and 20 h was good and equal to that of potatoes fried in the HSBOI oil (4.1% 18∶3). Fishy flavors, perceived with potatoes fried in the low-18∶3 oils, were significantly lower than those reported for potatoes fried in the unhydrogenated control oil, and the potatoes lacked the hydrogenated flavors of potatoes fried in hydrogenated oils. These results indicate that oils with lowered linolenic acid content produced by hybridization breeding of soybeans are potential alternatives to hydrogenated frying oils.     

Frying quality and stability of low-and ultra-low-linolenic acid soybean oils

To determine effects of very low levels of linolenic acid on frying stabilities of soybean oils, tests were conducted with 2% (low) linolenic acid soybean oil (LLSBO) and 0.8% (ultra-low) linolenic acid soybean oil (ULLSBO) in comparison with cottonseed oil (CSO). Potato chips were fried in the oils for a total of 25 h of oil use. No significant differences were found for either total polar compounds or FFA between samples of LLSBO and ULLSBO; however, CSO had significantly higher percentage of polar compounds and FFA than the soybean oils at all sampling times. Flavor evaluations of fresh and aged (1, 3, 5, and 7 wk at 25°C) potato chips showed some differences between potato chips fried in different oil types. Sensory panel judges reported that potato chips fried in ULLSBO and aged for 3 or 7 wk at 25°C had significantly lower intensities of fishy flavor than did potato chips fried in LLSBO with the same conditions. Potato chips fried in ULLSBO that had been used for 5 h and then aged 7 wk at 25°C had significantly better quality than did potato chips fried 5 h in LLSBO and aged under the same conditions. Hexanal was significantly higher in the 5-h LLSBO sample than in potato chips fried 5 h in ULLSBO. The decrease in linolenic acid from 2 to 0.8% in the oils improved flavor quality and oxidative stability of some of the potato chip samples.     

Frying quality and oxidative stability of high-oleic corn oils

To determine the frying stability of corn oils that are genetically modified to contain 65% oleic acid, high-oleic corn oil was evaluated in room odor tests and by total polar compound analysis. Flavor characteristics of french-fried potatoes, prepared in the oil, were also evaluated by trained analytical sensory panelists. In comparison to normal corn oil, hydrogenated corn oil and high-oleic (80 and 90%) sunflower oils, high-oleic corn oil had significantly (P<0.05) lower total polar compound levels after 20 h of oil heating and frying at 190°C than the other oils. Fried-food flavor intensity was significantly higher in the normal corn oil during the early portion of the frying schedule than in any of the high-oleic or hydrogenated oils; however, after 17.5 h of frying, the potatoes fried in normal corn oil had the lowest intensity of fried-food flavor. Corn oil also had the highest intensities of off-odors, including acrid and burnt, in room odor tests. High-oleic corn oil also was evaluated as a salad oil for flavor characteristics and oxidative stability. Results showed that dry-milled high-oleic corn oil had good initial flavor quality and was significantly (P<0.05) more stable than dry-milled normal corn oil after oven storage tests at 60°C, as evaluated by flavor scores and peroxide values. Although the high-oleic corn oil had significantly (P<0.05) better flavor and oxidative stability than corn oil after aging at 60°C, even more pronounced effects were found in high-temperature frying tests, suggesting the advantages of high-oleic corn oil compared to normal or hydrogenated corn oils.     

Performance of Regular and Modified Canola and Soybean Oils in Rotational Frying

Canola and soybean oils both regular and with modified fatty acid compositions by genetic modifications and hydrogenation were compared for frying performance. The frying was conducted at 185 ± 5 °C for up to 12 days where French fries, battered chicken and fish sticks were fried in succession. Modified canola oils, with reduced levels of linolenic acid, accumulated significantly lower amounts of polar components compared to the other tested oils. Canola oils generally displayed lower amounts of oligomers in their polar fraction. Higher rates of free fatty acids formation were observed for the hydrogenated oils compared to the other oils, with canola frying shortening showing the highest amount at the end of the frying period. The half-life of tocopherols for both regular and modified soybean oils was 1–2 days compared to 6 days observed for high-oleic low-linolenic canola oil. The highest anisidine values were observed for soybean oil with the maximum reached on the 10th day of frying. Canola and soybean frying shortenings exhibited a faster rate of color formation at any of the frying times. The high-oleic low-linolenic canola oil exhibited the greatest frying stability as assessed by polar components, oligomers and non-volatile carbonyl components formation. Moreover, food fried in the high-oleic low-linolenic canola oil obtained the best scores in the sensory acceptance assessment.     

Effect of altered fatty acid composition on soybean oil stability

During the last 15 years, hybridization and induced mutation breeding of soybeans have been successful in producing an altered fatty acid composition in the extracted oil. The objective of those investigations was to produce a low-linolenic acid soybena oil. Crude oils extracted from the seeds of three such genotypes were processed in laboratory simulations of commercial procedures to finished deodorized oils. Analysis of the fatty acid composition of the three oils showed the linolenic acid content to be 3.3%, 4.2% and 4.8%. The stability of these finished oils was compared to that of oil from a soybean variety having a linolenic acid content of 7.7% and of a commercial hydrogenated-winterized soybean oil (3.0% linolenic acid). Test and control oils were evaluated by a trained sensory panel initially, after accelerated storage at 60 C and during use at 190 C in room tests. Peroxide values were determined at the time of sensory evaluation. Results indicated there was no significant difference in flavor stability during storage between test and control oils. There was no significant difference, between the oils, in peroxide development during accelerated storage. Compared to control oils, the test oils had improved overall room odor intensity scores and lacked the fishy odors of non-hydrogenated soybean oil and the hydrogenated odors of commercial cooking oil. Presented at the AOCS meeting in Honolulu, HI in May 1986.     

High-temperature stability of soybean oils with altered fatty acid compositions

One canola oil and six soybean oils with different fatty acid compositions were heated intermittently, and bread cubes were fried in them to determine the stability of the oils. Two of the soybean oils were commercial varieties Hardin and BSR 101. The other soybean oils were from experimental lines developed at Iowa State University, and included A17 with 1.5% linolenate (18:3) and 15.1% palmitate (16:0), A16 with 1.9% 18:3 and 10.6% 16:0, A87-191039 with 1.8% 18:3 and 29.1% oleate (18:1) and A6 with 27.7% stearate (18:0). The soybean seeds were cold-pressed and crude canola oil was obtained without additives. Oils were refined, bleached and deodorized under laboratory conditions with additions. Each oil (300 mL) was heated to 180 ± 5°C in a minifryer. Bread cubes were fried at the beginning of heating, and half of the cubes were used for analyses. The second half was analyzed after storage at 60°C for seven days. Heating of the oils was continued for 20 h, cooled for 10 h, and then reheated for another 20 h, after which additional bread cubes were fried and analyzed. Results of sensory evaluation of the fried cubes, the peroxide values (PV) of oils extracted from the cubes and the conjugated dienoic acid values of the oils showed that the A17, A16, A87-191039 and A6 oils had better stabilities than did Hardin, BSR 101 and canola oils. The initial 18:3 contents of oils predicted their oxidative and flavor stabilities under heating and frying conditions (for PVvs. 18:3, r=0.89,P=0.008; for flavor qualityvs. 18:3, r=−0.93,P=0.002; for flavor intensityvs. 18:3, r=−0.91,P=0.004).     

Mid-Oleic/Ultra Low Linolenic Acid Soybean Oil: A Healthful New Alternative to Hydrogenated Oil for Frying

To determine the frying stability of mid-oleic/ultra low linolenic acid soybean oil (MO/ULLSBO) and the storage stability of food fried in it, tortilla chips were fried in MO/ULLSBO, soybean oil (SBO), hydrogenated SBO (HSBO) and ultra low linolenic SBO (ULLSBO). Intermittent batch frying tests were conducted up to 55 h of frying, and then tortilla chips were aged up to 4 months at 25 °C. Frying oils were analyzed for total polar compounds to determine the frying stability of the oil. Tortilla chips were analyzed for hexanal as an indicator of oxidative deterioration and by sensory analysis using a trained, experienced analytical panel. Results showed no significant differences between the total polar compound levels for MO/ULLSBO and HSBO after 55 h of frying, indicating a similar fry life. However, total polar compound levels for ULLSBO and SBO were significantly higher than for either MO/ULLSBO or HSBO, indicating a lower oil fry life. Hexanal levels in aged tortilla chips fried in SBO were significantly higher than in chips fried in any of the other oils. Tortilla chips fried in MO/ULLSBO and HSBO had significantly lower hexanal levels than in chips fried in ULLSBO. A sensory analysis of rancid flavor intensity showed similar trends to those for hexanal formation. The chips fried in SBO had the highest rancid flavor intensity, with significantly lower hexanal levels in chips fried in HSBO and MO/ULLSBO. Based on these results, MO/ULLSBO not only had a good fry life but also produced oxidatively stable fried food, and therefore would be a healthful alternative to HSBO. Names are necessary to report factually on available data; however, the USDA neither guarantees nor warrants the standard of the product, and the use of the name by the USDA implies no approval of the product to the exclusion of others that may also be suitable.     

Addition of ferulic acid,ethyl ferulate,and feruloylated monoacyl- and diacylglycerols to salad oils and frying oils

To determine antioxidative effects of ferulic acid and esterified ferulic acids, these compounds were added to soybean oils (SBO), which were evaluated for oxidative stability and frying stability. Additives included feruloylated MAG and DAG (FMG/FDG), ferulic acid, ethyl ferulate, and TBHQ. After frying tests with potato chips, oils were analyzed for retention of additives and polar compounds. Chips were evaluated for hexanal and rancid odor. After 15 h frying, 71% of FMG/FDG was retained, whereas 55% of ethyl ferulate was retained. TBHQ and ferulic acid levels were 6% and <1%, respectively. Frying oils with ethyl ferulate or TBHQ produced significantly less polar compounds than SBO with no additives. Chips fried in SBO with TBHQ or ferulic acid had significantly lower amounts of hexanal and significantly less rancid odor after 8 d at 60°C than other samples. Oils were also aged at 60°C, and stability was analyzed by PV, hexanal, and rancid odor. Oils with TBHQ or FMG/FDG had significantly less peroxides and hexanal, and a lower rancid odor intensity than the control. FMG/FDG inhibited deterioration at 60°C, whereas ethyl ferulate inhibited the formation of polar compounds in frying oil. Ferulic acid acted as an antioxidant in aged fried food. TBHQ inhibited oil degradation at both temperatures. Presented at the 94th AOCS Meeting & Expo, Kansas City, MO, May 4–7, 2003.     

Electrochemical hydrogenation of edible oils in a solid polymer electrolyte reactor. Sensory and compositional characteristics of low Trans soybean oils

Soybean oils were hydrogenated either electrochemically with Pd at 50 or 60°C to iodine values (IV) of 104 and 90 or commercially with Ni to iodine values of 94 and 68. To determine the composition and sensory characteristics, oils were evaluated for triacylglycerol (TAG) structure, stereospecific analysis, fatty acids, solid fat index, and odor attributes in room odor tests. Trans fatty acid contents were 17 and 43.5% for the commercially hydrogenated oils and 9.8% for both electrochemically hydrogenated products. Compositional analysis of the oils showed higher levels of stearic and linoleic acids in the electrochemically hydrogenated oils and higher oleic acid levels in the chemically hydrogenated products. TAG analysis confirmed these findings. Monoenes were the predominant species in the commercial oils, whereas dienes and saturates were predominant components of the electrochemically processed samples. Free fatty acid values and peroxide values were low in electrochemically hydrogenated oils, indicating no problems from hydrolysis or oxidation during hydrogenation. The solid fat index profile of a 15∶85 blend of electrochemically hydrogenated soybean oil (IV=90) with a liquid soybean oil was equivalent to that of a commercial stick margarine. In room odor evaluations of oils heated at frying temperature (190°C), chemically hydrogenated soybean oils showed strong intensities of an undesirable characteristic hydrogenation aroma (waxy, sweet, flowery, fruity, and/or crayon-like odors). However, the electrochemically hydrogenated samples showed only weak intensities of this odor, indicating that the hydrogenation aroma/flavor would be much less detectable in foods fried in the electrochemically hydrogenated soybean oils than in chemically hydrogenated soybean oils. Electrochemical hydrogenation produced deodorized oils with lower levels of trans fatty acids, compositions suitable for margarines, and lower intensity levels of off-odors, including hydrogenation aroma, when heated to 190°C than did commercially hydrogenated oil.     

Frying Performance of No-<Emphasis Type="Italic">trans</Emphasis>, Low-Linolenic Acid Soybean Oils

Two extruded-expelled physically refined soybean oils with reduced contents of linolenic acid, ultra-low- linolenic acid (ULL, 1.5%) and low-linolenic acid (LL, 2.6%), and a extruded-expelled physically refined control oil (control, 5.3% linolenic acid) were evaluated by frying French fries in a commercial-like setting for 6 h day⁻¹ during 23 days. The oils became darker, increased in yellow color at the beginning, and became redder and less green throughout the process. Free fatty acids levels were not different among the oils until day 14, after which, ULL was different from the control for the remainder of frying. The conjugated dienoic acid values were greatest in the control. Generally, ULL and LL oils had lower percentages of polar compounds than did the control, providing a frying life 2 days longer than the control and ~30% increase in frying time. A trained sensory panel evaluated the French fries on days 2, 5, and 6. Buttery and potato flavors decreased, and rancid and painty flavors increased over frying time for all products. Rancid flavor was highest in the fries from the control oil. Overall, the ULL and LL oils performed better than did the control oil and ULL tended to perform better than the LL.     

Formation and distribution of oxidized fatty acids during deep‐ and pan‐frying of potatoes

The formation of cis‐9,10‐epoxystearate, trans‐9,10‐epoxystearate, cis‐9,10‐epoxyoleate, cis‐12,13‐epoxyoleate, trans‐9,10‐epoxyoleate, trans‐12,13‐epoxyoleate and the co‐eluting 9‐ and 10‐ketostearates during eight successive pan‐ and deep‐frying sessions of pre‐fried potatoes in five different types of vegetable oils – namely cottonseed oil, sunflower oil, vegetable shortening, palm oil and virgin olive oil – was followed and quantified both in fried oils and in fried potatoes by GC/MS after derivatization to methyl esters. These oxidized fatty acids were present at relatively low concentrations in the fresh oils and pre‐fried potatoes while they increased linearly with frying time, reaching up to 1140.8 µg/g in virgin olive oil (VOO) and 186.9 µg/g in potatoes pan‐fried in VOO after eight pan‐frying sessions, with trans‐9,10‐epoxystearate predominating in all cases. The formation of polymerized triacylglycerols (PTG) was also quantified in frying oils by size exclusion HPLC. Pan‐frying caused higher oxidized fatty acid and PTG formation compared to deep‐frying. Epoxyoleates and PTG concentrations were increased after frying in polyunsaturated oils, while epoxystearate and 9‐ and 10‐ketostearate concentrations were increased after frying in monounsaturated oils. No specific absorption of the oxidized fatty acids by the fried potatoes seems to occur. The dietary intake of oxidized fatty acids and PTG by the consumption of fried potatoes was discussed.     

Storage stability of potato chips fried in genetically modified canola oils

The storage stability of potato chips fried in regular (RCO), hydrogenated (HYCO), low-linolenic (LLCO), and high-oleic (HOCO) canola oils was compared. Potato chips were fried in each oil over a 5-d period for a total of 40 h of frying. Chips from frying day 1 and 5 were packaged and stored at 60°C for 0, 1, 2, 4, 8, and 16 d. Lipids were extracted from the stored chips and analyzed for peroxide values, free fatty acids (FFA), conjugated dienoic acids (CDA), and polar components. A trained sensory panel evaluated the stored chips for odors characteristic of oxidation. Chips were also analyzed for volatile components. Potato chips fried in RCO, LLCO and HOCO developed an intense painty odor, whereas chips fried in HYCO developed an intense stale/musty odor by the end of the 16 d of storage. Chips fried in RCO had greater rates of accumulation of peroxides, FFA, CDA, and polar components and developed higher levels of total volatiles over the 16 d of storage than chips fried in the other three oils. Chips fried in HYCO had lower rates of accumulation of peroxides and CDA than chips fried in LLCO and HOCO, and lower rates of FFA accumulation than chips fried in LLCO. Chips fried in HYCO and HOCO had the lowest amounts of total volatiles during storage. The effect of oil degradation products on potato chip storage stability was not shown in this study since only the chips fried in HYCO from frying day 5 exhibited a significantly greater rate of off-odor development than chips from frying day 1, and only the chips fried in LLCO from frying day 5 had a greater rate of accumulation of volatiles than chips from frying day 1.     

Effects of hydrogenation and additives on cooking oil performance of soybean oil

Soybean oil was continuously hydrogenated in a slurry system to investigate the effects of linolenate content and additives on cooking oil performance. Room odor evaluations carried out on oils heated to 190 C after frying bread cubes showed that the oils hydrogenated with Cu catalyst to 2.4% linolenate (Cu-2.4) and with Ni catalyst to 4.6 linolenate (Ni-4.6) had a significantly lower odor intensity score than the unhydrogenated soybean oil (SBO). Other hydrogenated oils (Cu-0.5 and Ni-2.7) were not significantly better than SBO. Oil hydrogenated with Ni (Ni-0.4) scored poorly because of its strong “hydrogenated-paraffin” odor. The performance of all partially hydrogenated oils (2.4, 2.7 and 4.6% linolenate) was improved by adding methyl silicone (MS), but the most hydrogenated oils (0.5 and 0.4% linolenate) were not improved. Although with tertiary butyl hydroquinone (TBHQ) no improvement was obtained, with the combination of TBHQ + MS all odor scores were lower, indicating a synergistic effect. Evaluations of bread cubes after intermittent heating and frying showed that the breads fried in most hydrogenated oils (Ni-0.4, Cu-2.4 and Ni-2.7) were rated significantly better in flavor quality than breads fried in SBO. The bread cubes fried in MS-treated oils had significantly higher flavor quality scores than breads fried in SBO or SBO containing TBHQ. Dimer analyses by gel permeation chromatography and color development after heat treatments also did not correlate with sensory analyses.     

Deterioration of diacylglycerol‐ and triacylglycerol‐rich oils during frying of potatoes

The stabilities of a commercial diacylglycerol‐rich oil (DAG) and a salad oil (TAG) that had been prepared from a mixture of rapeseed and soybean oils were compared while frying potatoes at 180 °C for 3 h. The representative chemical and physical characteristics of the oils were assessed before and after frying, together with the amount of volatile aldehydes in the exhaust of frying. Among the deterioration indications, the carbonyl value, polymer content, and residual polyunsaturated fatty acid content were similar and not significantly different between the TAG and DAG. On the other hand, the characteristics relating to free fatty acids, i.e. the acid value and emission of chemiluminescence at 100 °C, were greater and the smoke and flash points were lower in the DAG than in the TAG. An irritating odor was generated from the DAG after 1 h of frying and got stronger as frying continued. These results suggested that DAG more easily forms free fatty acids under frying conditions than TAG.     

Effect of Different Frying Methods on the Total <Emphasis Type="Italic">trans</Emphasis> Fatty Acid Content and Oxidative Stability of Oils

The main objective of this study was to determine the effect of different frying oils and frying methods on the formation of trans fatty acids and the oxidative stability of oils. Sunflower, canola and commercial frying oils, the most commonly used oils for frying potatoes in the fast food industry, were used as the frying medium. The value for total polar compounds was highest when commercial frying oil was used in the microwave oven (22.5 ± 1.1). The peroxide value, as an indicator of oil oxidation, was lowest for microwave oven frying (2.53 ± 0.03). The K₂₃₂ and K₂₇₀ values were 0.41 ± 0.04 and 0.18 ± 0.02, respectively, for commercial frying oil in the microwave oven. The lowest free fatty acid content was recorded for the commercial frying oil used in the deep‐fat fryer at 190 °C. The highest iodine value was measured for sunflower oil used in the deep‐fat fryer (148.14 ± 0.07), indicating a greater degree of unsaturation. The lowest trans fatty acid value was recorded for sunflower oil in the microwave oven (0.17 ± 0.05), with a higher overall amount of total trans fatty acids observed for oils after frying in the electrical deep‐fat fryer compared to the microwave. Sunflower oil was favourable for both frying methods in terms of the trans fatty acid content.     

Review of stability measurements for frying oils and fried food flavor

Measurements of degradation in frying oils based on oil physical properties and volatile and nonvolatile decomposition products were reviewed. Rapid methods by means of test kits were also considered. Factors that affect the analysis of total polar components (TPC) in frying oils were examined. Relationships between TPC, free fatty acid (FFA) content, Food Oil Sensor readings (FOS), color change (ΔE), oil fry life and fried-food flavor were evaluated. Flavor scores for codfish, fried in fresh and discarded commercial frying oil blends, were dependent upon individuals in the consumer panel (n=77). Part (n=29) of the panel preferred the flavor of fresh fat; others (n=24) didn't; the rest (n=24) had no preference. FFA, FOS and TPC were analyzed in two soybean oils and in palm olein during a four-day period in which french fries were fried. Flavor score and volatiles of potatoes fried on days 1 and 4 in each oil were also determined. TPC, FFA and FOS significantly increased (P<0.05) in all oils during the frying period. TPC and FFA were highest in the used palm olein, and flavor of potatoes fried in palm olein on day 1 was less desirable than those fried in the soybean oils. Potatoes fried in day-1 oils had significantly higher concentrations (P<0.10) of several pyrazines and aldehydes than those fried in day-4 oils. Presented at the 84th Annual Meeting of the American Oil Chemists' Society, Anaheim, California, April 25–29, 1993.     

Utilization of high‐oleic rapeseed oil for deep‐fat frying of French fries compared to other commonly used edible oils

Changes in chemical, physical and sensory parameters of high‐oleic rapeseed oil (HORO) (NATREON?) during 72 h of deep‐fat frying of potatoes were compared with those of commonly used frying oils, palm olein (PO), high‐oleic sunflower oil (HOSO) and partially hydrogenated rapeseed oil (PHRO). In addition to the sensory evaluation of the oils and the potatoes, the content of polar compounds, oligomer triacylglycerols and free fatty acids, the oxidative stability by Rancimat, the smoke point and the anisidine value were determined. French fries obtained with HORO, PO and HOSO were still suitable for human consumption after 66 h of deep‐fat frying, while French fries fried in PHRO were inedible after 30 h. During the frying period, none of the oils exceeded the limit for the amount of polar compounds, oligomer triacylglycerols and free fatty acids recommended by the German Society of Fat Science (DGF) as criteria for rejection of used frying oils. After 72 h, the smoke point of all oils was below 150 °C, and the amount of tocopherols was reduced to 5 mg/100 g for PHRO and 15 mg/100 g for HORO and HOSO. Remarkable was the decrease of the oxidative stability of HOSO measured by Rancimat. During frying, the oxidative stability of this oil was reduced from 32 h for the fresh oil to below 1 h after 72 h of frying. Only HORO showed still an oxidative stability of more than 2 h. From the results, it can be concluded that the use of HORO for deep‐fat frying is comparable to other commonly used oils.