共查询到20条相似文献,搜索用时 140 毫秒
1.
《工程(英文)》2017,3(4):504-511
The stability of pump-turbines is of great importance to the operation of pumped storage power (PSP) stations. Both hydraulic instabilities and operational instabilities have been reported in PSP stations in China. In order to provide a reference to the engineers and scientists working on pump-turbines, this paper summarizes the hydraulic instabilities and performance characteristics that promote the operational instabilities encountered in pump-turbine operations in China. Definitions, analytical methods, numerical and experimental studies, and main results are clarified. Precautions and countermeasures are also provided based on a literature review. The gaps between present studies and the need for engineering practice are pointed out. 相似文献
2.
Chinedu Nweke Erika Martin Todd Gehr Donald Brophy Daniel Carl 《Hemodialysis international. International Symposium on Home Hemodialysis》2015,19(2):323-329
Arteriovenous graft (AVG) thrombosis is a frequent cause of graft failure. We evaluated coagulation protein concentrations, platelet function, and viscoelasticity factors in 20 hemodialysis (HD) patients with AVGs. The goal was to determine whether significant differences in protein concentrations, platelet function, and viscoelasticity factors exist among dialysis patients requiring frequent AVG declot procedures vs. those who do not. Twenty HD patients were enrolled: 10 frequent clotters (>3 declots in the previous year) and 10 were nonclotters. Patients on antiplatelets or chronic anticoagulation were excluded. Laboratories were drawn pretreatment and heparinase was added to counteract any potential heparin effect. Coagulation protein concentrations including tissue factor (TF), thrombin/antithrombin III complex (TAT), and prothrombin fragment 1 + 2 (F1+2) were assayed. The time to clot onset was measured by force onset time (FOT). Platelet contractile force (PCF) measured the force produced by platelets during clot retraction, whereas clot rigidity was measured as clot elastic modulus (CEM). FOT, CEM, and PCF were measured by Hemodyne. Both groups had upregulation of the TF pathway, as TF, TAT, and F1+2 levels were similarly increased over baseline levels. Hemodialysis patients with frequent AVG clotting had higher levels of both PCF and CEM compared with nonclotters. Additionally, the frequent clotters had a lower FOT relative to nonclotters, although both were considered in the normal range. Our study suggests that HD patients with recurrent AVG thrombotic events form clots with higher tensile strength compared with HD patients without recurrent graft thrombosis. 相似文献
3.
4.
Ward Vanlaar Robyn Robertson Kyla Marcoux Daniel Mayhew Steve Brown Paul Boase 《Accident; analysis and prevention》2012
While a general decreasing trend in the number of persons killed in a traffic crash involving a drinking driver has occurred in Canada since the 1980s, it is evident that much of this decrease occurred in the 1990s. Since 2002, less progress has been made as the number of persons killed in crashes involving drinking drivers remains high. To better understand the current situation, this paper describes trends in drinking and driving in Canada from 1998 to 2011 using multiple indicators based on data collected for the Traffic Injury Research Foundation's (TIRF) Road Safety Monitor (RSM), the National Opinion Poll on Drinking and Driving, and trends in alcohol-related crashes based on data collected for TIRF's national Fatality Database in Canada. There has been a continued and consistent decrease in the number of fatalities involving a drinking driver in Canada. This remains true when looking at the number of fatalities involving a drinking driver per 100,000 population and per 100,000 licensed drivers. This decreasing trend is also still apparent when considering the percentage of persons killed in a traffic crash in Canada involving a drinking driver although less pronounced. Data from the RSM further show that the percentage of those who reported driving after they thought they were over the legal limit has also declined. However, regardless of the apparent decreasing trend in drinking driving fatalities and behaviour, reductions have been relatively modest, and fatalities in crashes involving drivers who have consumed alcohol remain high at unacceptable levels. 相似文献
5.
Kamlesh Goel 《Scientometrics》2002,55(2):243-258
An analysis of gender differences in psychology in India provides quantitative and qualitative assessment of R&D output contributed by psychologists with the indication of the trend of growth, skewness, relatedness, co-authorship pattern of productivity. 相似文献
6.
7.
8.
9.
10.
Carlo Rega 《影响评估与项目评价》2013,31(1):45-51
Ecological compensation or biodiversity offsets are increasingly recognized as a key element for environmental sustainability; however, more attention has been paid so far to compensation applied at the project level rather than to spatial planning. Meanwhile, there is a growing acknowledgement that extensive environmental depletion is being caused by the cumulative effects of small developments allowed by spatial/land use plans. This paper aims to collect empirical evidence on the requirements for ecological compensation at a strategic level of decision-making – spatial planning – in Italy. Results indicate that spatial plans are increasingly introducing offset requirements for residual impacts of new urban developments; however, methodological and operational aspects are not sufficiently addressed and enforcement mechanisms appear weak. The lack of legal frameworks and of established methods appears to be the main element currently hindering biodiversity offset implementation at the planning level. It is suggested that, in the Italian context, a way to foster better implementation is the design of environmental stewardship schemes involving farmers, developers and planning authorities. 相似文献
11.
References: 《中国标准化(英文版)》2007,(3):22-27
China has begun its standardization process in the cultural heritage since 1960.The standards contributed a lot to the development of the heritage conservation practices. In this paper, the author summaries the existing condition of standardization in the cultural heritages and museums field in China, and presents Standards for the Classification of Collected Cultural Heritages. Also this paper points out the problems which exist in the standardization in the cultural heritage, and gives the advice to solve these problems. 相似文献
12.
The system for Metrology in Chemistry in Germany is described. At the national standards level, a network of high-level chemistry
institutes coordinated by the national metrology institute, PTB, provides the primary references for chemical measurements.
A dissemination mechanism employs chemical calibration laboratories accredited within the framework of the German Calibration
Service (DKD). They act as “multipliers” between the national standards level and the user level by providing the user with
calibration means which are traceable to the SI via national standards. Traceability structures in clinical chemistry, electrochemistry,
elemental analysis and gas analysis are described 相似文献
13.
A.G. Michette 《成像科学杂志》2013,61(1):45-48
The problems associated with imaging using soft X-rays are discussed. Possible solutions are considered for some of these problems. 相似文献
14.
15.
本文综述了氧化锆及其复相陶瓷超塑性的研究现状,论述了陶瓷超塑性的变形机理,微观特征和断裂特性。同时,分析和对比了陶瓷超塑性与金属超塑性的特点。目前,对于正确理解超塑性陶瓷的变形机理,还需进行大量工作。 相似文献
16.
提升国内ERP实施顾问的水平 总被引:3,自引:0,他引:3
在引入ERP系统过程中,实施是一个相当重要的环节,实施顾问的水平高低对ERP项目成功与否有举足轻重的作用。本文主要对国内ERP实施顾问的现状、国内ERP实施顾问所面临的问题进行分析,在此基础上对提高国内ERP实施顾问水平的紧迫性、重要性以及如何提高国内实施顾问的水平进行论述。 相似文献
17.
18.
This paper gives the results of a survey of small manufacturing companies in Scotland with reference to their managers' understanding of and attitudes towards design; their control of the product design/development process; the communication of design objectives within the firm and forward planning for new product development. The survey revealed a generally positive attitude to design in the companies visited and the crucial role of both suppliers and customers in ensuring the success of the design activity. 相似文献
19.
20.
金属间化合物超塑性是近十几年开展的研究课题。超塑性加工技术是解决金属间化合物加工成型难题最可行的方法之一。综述了金属间化合物及其合金的超塑性研究进展,并着重介绍了热点研究的铝化物的情况。 相似文献