Drug delivery: Layer‐By‐Layer‐Assembled Capsules and Films for Therapeutic Delivery (Small 17/2010)

Polymeric materials formed via layer‐by‐layer (LbL) assembly have promise for use as drug delivery vehicles. These multilayered materials, both as capsules and thin films, can encapsulate a high payload of toxic or sensitive drugs, and can be readily engineered and functionalized with specific properties. This review highlights important and recent studies that advance the use of LbL‐assembled materials as therapeutic devices. It also seeks to identify areas that require additional investigation for future development of the field. A variety of drug‐loading methods and delivery routes are discussed. The biological barriers to successful delivery are identified, and possible solutions to these problems are discussed. Finally, state‐of‐the‐art degradation and cargo release mechanisms are also presented.     

Electrospinning Nanofibers as Uniaxially Aligned Arrays and Layer‐by‐Layer Stacked Films

The conventional procedure for electrospinning has been modified to generate nanofibers as uniaxially aligned arrays over large areas. The key to the success of this method was the use of a collector composed of two conductive strips separated by an insulating gap of variable width. Directed by electrostatic interactions, the charged nanofibers were stretched to span across the gap and became uniaxially aligned arrays. Two types of gaps have been demonstrated: void gaps and gaps made of a highly insulating material. When a void gap was used, the nanofibers could readily be transferred onto the surfaces of other substrates for various applications. When an insulating substrate was involved, the electrodes could be patterned in various designs on the solid insulator. In both cases, the nanofibers could be conveniently stacked into multi‐layered architectures with controllable hierarchical structures. This new version of electrospinning has already been successfully applied to a range of different materials that include organic polymers, carbon, ceramics, and composites.     

Healable,Transparent, Room‐Temperature Electronic Sensors Based on Carbon Nanotube Network‐Coated Polyelectrolyte Multilayers

Transparent and conductive film based electronics have attracted substantial research interest in various wearable and integrated display devices in recent years. The breakdown of transparent electronics prompts the development of transparent electronics integrated with healability. A healable transparent chemical gas sensor device is assembled from layer‐by‐layer‐assembled transparent healable polyelectrolyte multilayer films by developing effective methods to cast transparent carbon nanotube (CNT) networks on healable substrates. The healable CNT network‐containing film with transparency and superior network structures on self‐healing substrate is obtained by the lateral movement of the underlying self‐healing layer to bring the separated areas of the CNT layer back into contact. The as‐prepared healable transparent film is assembled into healable transparent chemical gas sensor device for flexible, healable gas sensing at room temperature, due to the 1D confined network structure, relatively high carrier mobility, and large surface‐to‐volume ratio. The healable transparent chemical gas sensor demonstrates excellent sensing performance, robust healability, reliable flexibility, and good transparency, providing promising opportunities for developing flexible, healable transparent optoelectronic devices with the reduced raw material consumption, decreased maintenance costs, improved lifetime, and robust functional reliability.     

Freestanding Nanostructures via Layer‐by‐Layer Assembly

Freestanding flexible nanocomposite structures fabricated by layer‐by‐layer (LbL) assembly are promising candidates for many potential applications, such as in the fields of thermomechanical sensing, controlled release, optical detection, and drug delivery. In this article, we review recent advances in the fabrication and characterization of different types of freestanding LbL structures in air and at air/liquid and liquid/liquid interfaces, including micro‐ and nanocapsules, microcantilevers, freely suspended membranes, encapsulated nanoparticle arrays, and sealed‐cavity arrays. Several recently developed fabrication techniques, such as spin‐assisted coating, dipping, and micropatterning, make the assembly process more efficient and impart novel physical properties to the freestanding films.     

Layer‐by‐Layer Hydrogen‐Bonded Polymer Films: From Fundamentals to Applications

Recent years have seen increasing interest in the construction of nanoscopically layered materials involving aqueous‐based sequential assembly of polymers on solid substrates. In the booming research area of layer‐by‐layer (LbL) assembly of oppositely charged polymers, self‐assembly driven by hydrogen bond formation emerges as a powerful technique. Hydrogen‐bonded (HB) LbL materials open new opportunities for LbL films, which are more difficult to produce than their electrostatically assembled counterparts. Specifically, the new properties associated with HB assembly include: 1) the ease of producing films responsive to environmental pH at mild pH values, 2) numerous possibilities for converting HB films into single‐ or two‐component ultrathin hydrogel materials, and 3) the inclusion of polymers with low glass transition temperatures (e.g., poly(ethylene oxide)) within ultrathin films. These properties can lead to new applications for HB LbL films, such as pH‐ and/or temperature‐responsive drug delivery systems, materials with tunable mechanical properties, release films dissolvable under physiological conditions, and proton‐exchange membranes for fuel cells. In this report, we discuss the recent developments in the synthesis of LbL materials based on HB assembly, the study of their structure–property relationships, and the prospective applications of HB LbL constructs in biotechnology and biomedicine.