共查询到19条相似文献,搜索用时 218 毫秒
1.
2.
接入网的光纤到户技术(FTTH)在各地区部署热度不退,供货商和技术专家们也已经深入探索以满足下一代应用对带宽的需求。这些应用包括高清IPTV广播以及多媒体发布系统等,其带宽需求远远超出了当前接入技术所能够提供的最大带宽。因此,10Gbit/s以太网无源光网络(10GEPON)技术绝对是一个很有吸引力的解决方案。它可十倍提升带宽,通过光纤达到10Gbit/s宽带网络接入速率,同时与现有的1GEPON方案实现核心协议兼容。 相似文献
3.
Lior Khermosh Gilad Aloni 《电信技术》2008,(7)
1 10 Gbit/s EPON的潜力
随着光纤到户(FTTH)部署的逐渐增多,供货商和技术专家也开始进一步深入探索,以满足下一代应用对带宽的要求。这些应用包括高清IPTV广播以及多媒体发布系统等,其带宽需求远远超出了当前接入技术所能够提供的最大带宽。因此,10 Gbit/s以太无源光网络(EPON)绝对是一个很有吸引力的解决方案。它可10倍提升带宽,通过光纤达到10 Gbit/s宽带网络接入速率, 相似文献
4.
5.
光纤到家(FTTH,Fiber to the Home)是以无源的光网络(PON)为特点,采用光纤点到多点的网络拓扑结构(代替传统电信的点对点结构),节省了光纤用量、设备成本、管理成本和运维成本。其技术是高带宽和多业务接入技术。特别是目前光缆降价、铜材涨价,更加速了实现全光网络的梦想,加速到达CATV发展的终极目标——FTTH。 相似文献
6.
1引言
随着互联网的持续快速发展,各种新业务层出不穷,使人们对网络接入带宽的需求持续增加,特别是网络游戏、会议电视、视频点播等业务,使得传统的接入方式将无法满足带宽的需求。根据相关数据分析,未来3年用户平均带宽需求将超过10Mbit/s。与其他有线、无线接入技术相比,光纤接入在带宽容量和覆盖距离方面具有无与伦比的优势。随着低成本PON(无源光网络)技术的出现和迅速成熟以及光纤光缆成本的快速下降,使运营商接入网光纤化的想法逐步得以实现。 相似文献
7.
8.
《电信网技术》2010,(1):86-87
基于PON技术的FTTx接入网络不但需要承载更高带宽的业务,也承载着电信运营商们如何在高清时代实现固网复兴的伟大理想。在网络融合、业务融合的大趋势下,华为的光纤接入网络方案从架构、性能,业务承载、运维等方面实现了革命性的技术创新,适应运营商建设统一、面向未来、自动化的绿色接入网络的诉求。华为技术有限公司的《华为光纤接入网络的六大技术创新》一文对华为光纤接入网络的六大创新技术进行了详细介绍。在网络融合的大趋势下,多功能、高集成度、大容量、高带宽、广覆盖和绿色节能成为设备的基本特征,尤其是对于海量部署的接入层设备,这些特性直接影响到运营商的网络架构、部署计划,甚至是投资计划。 相似文献
9.
随着现代科技的发展和互联网使用者对于带宽要求的不断增加。这就催生了带宽高、扩展性好、运维成本低的宽带光纤接入技术的持续发展,在国外,对于FTTH技术的应用发展的研究已经进行。中国最近也在迅速发展。本文从FTTH技术的特点出发,对其发展历程和应用前景进行分析。希望通过这一方面的研究促进F T T H技术的进一步发展和推广。 相似文献
10.
11.
多子频带/子信道关联跳频扩频通信技术 总被引:1,自引:1,他引:0
技术的发展和个人通信量需求的增长,使得电磁频谱资源日益紧缺,成为当今无线通信技术发展的瓶颈。分析了在信道存在加性白噪声和多址干扰的条件下,频带细化对提高频谱利用率的作用。指出传统频分复用方式和扩频通信方式下频谱利用率不高的根本原因,提出了一种提高频谱利用率的多子频带/多子信道关联跳频通信技术。使用该技术可极大地提高通信频谱利用率,同时可提高通信的保密性。 相似文献
12.
新一代SDH关键技术和动态带宽分配的实现 总被引:2,自引:0,他引:2
首先介绍了为解决传说SDH传输技术存在的多业务(主要是宽带数据业务)承载能力不足和带宽分配缺乏灵活性等问题而出现的一系列新技术(如虚级联、链路容量调整方案,通用成帧规程等)的基本原理和特点,并在此基础上进一步讨论了如何实现SDH带宽动态分配的问题。 相似文献
13.
The virtual path concept has several valuable features to construct an economical and efficient asynchronous transfer mode (ATM) network. One of them is bandwidth control which affords transmission efficiency improvement through statistical sharing of capacity. An effective bandwidth control algorithm and its calculated performance are described. Network performance with the algorithm is evaluated, and the bandwidth control is shown to successfully improve network transmission efficiency with only a slight increase in processing load compared to the fixed bandwidth scheme. A method is also proposed to equalize call loss probability for each virtual path. The effectiveness of the method is demonstrated by analysis 相似文献
14.
T. Shanmuganantham S. Raghavan 《AEUE-International Journal of Electronics and Communications》2009,63(8):653-659
In this paper the design and development of a compact broadband probe-fed Microstrip patch antenna for bandwidth improvement and antenna size reduction in a single design is proposed. The well-known technique of effective substrate thickness increment is performed to improve the impedance bandwidth, whereas for size reduction the electrical length of the conducting patch has been increased. A compact probe-fed inverted U-shaped microstrip patch antenna with a W-shaped ground plane has been designed and the experimental results are presented. 相似文献
15.
16.
随着科技的不断发展,服务型机器人开始进入人们的生活,但国内较为缺乏通用开发平台,共性软件模块也非常少,本文对此做了相应的研究与设计,具有一定的实际意义。 相似文献
17.
18.
Ghorbani A. Ansarizadeh M. Abd-alhameed R. A. 《Antennas and Propagation, IEEE Transactions on》2010,58(2):250-257
19.
Though a microstrip patch antenna has advantages of low profile and structural planarity, but a single microstrip patch antenna has limitation of low gain and narrow bandwidth. To overcome these problems, multi-layer structures are used. The antenna performance can further be enhanced, if multi-layer structures are designed for array of patch antennas. Moreover, the simultaneous improvement of gain and bandwidth, which are two conflicting parameters, is another challenge. To meet these challenges, this article proposes a microstrip patch antenna array, inspired with a superstrate – comprising of Split Ring Resonators (SRR) and wire strips. Gain and bandwidth of 4.3 dBi and 425 MHz, respectively, is achieved by an unloaded array at IEEE 802.16a 5.8 GHz Wi-MAX band. However, by covering this array with the proposed superstrate, gain and bandwidth of 12.1 dBi and 780 MHz, respectively, is obtained, thus providing the gain improvement of 7.8 dBi and bandwidth enhancement of 355 MHz. Fabrication and testing of the proposed antenna is done for comparing simulated and measured results. Equivalent circuit of this newly devised array has been designed and discussed. 相似文献