The influence of the structural and electronic characteristics of palladium on the activity and selectivity of Pd/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and Pd-Co/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts for the hydrogenation of acetylene hydrocarbons

The influence of the structural and electronic characteristics of nonpromoted and cobalt-promoted Pd catalysts on their adsorption and catalytic properties is studied. It is shown that the conversion of vinylacetylene depends on the dispersion of palladium for both types of catalysts synthesized from acetate and acetylacetonate complexes. The palladium acetylacetonate catalysts have a higher palladium dispersion than the samples obtained from acetate complex solutions, thus leading to a higher conversion of vinylacetylene. It is established that the selectivity of vinylacetylene conversion into 1,3-butadiene on palladium acetate and acetylacetonate catalysts depends on the state of the 3d orbitals of surface Pd atoms. The palladium acetate catalysts are characterized by a higher electron density on the 3d orbital in comparison with the acetylacetonate samples, thus producing higher selectivities of vinylacetylene conversion into 1,3-butadiene. The introduction of cobalt into Pd/δ-Al₂O₃ catalyst synthesized from acetylacetonate complex leads to the formation of bimetallic Pd-Co particles, in which Pd atoms have higher electron density than those in the nonpromoted Pd/δ-Al₂O₃ catalyst, due probably to the donation of electron density from promoter atoms, with a resulting decline in the adsorption ability of bimetallic particles with regard to 1,3-butadiene and hydrogen. As a consequence, the selectivity of vinylacetylene conversion into 1,3-butadiene increases. Requirements for the size, dispersion, and electronic characteristics of the active component in the catalysts for the selective hydrogenation of vinylacetylene are formulated, and two techniques for their synthesis are proposed.     

Effect of H<Subscript>2</Subscript>O<Subscript>2</Subscript> modification of H<Subscript>3</Subscript>PW<Subscript>12</Subscript>O<Subscript>40</Subscript>@carbon for m-xylene oxidation to isophthalic acid

The production of isophthalic acid (IPA) from the oxidation of m-xylene (MX) by air is catalyzed by H₃PW₁₂O₄₀ (HPW) loaded on carbon and cobalt. We used H₂O₂ solution to oxidize the carbon to improve the catalytic activity of HPW@C catalyst. Experiments reveal that the best carbon sample is obtained by calcining the carbon at 700 °C for 4 h after being impregnated in the 3.75% H₂O₂ solution at 40 °C for 7 h. The surface characterization displays that the H₂O₂ modification leads to an increase in the acidic groups and a reduction in the basic groups on the carbon surface. The catalytic capability of the HPW@C catalyst depends on its surface chemical characteristics and physical property. The acidic groups play a more important part than the physical property. The MX conversion after 180 min reaction acquired by the HPW@C catalysts prepared from the activated carbon modified in the best condition is 3.81% over that obtained by the HPW@C catalysts prepared from the original carbon. The IPA produced by the former is 46.2% over that produced by the latter.     

Ni-Co bimetallic catalyst for CH<Subscript>4</Subscript> reforming with CO<Subscript>2</Subscript>

A co-precipitation method was employed to prepare Ni/Al₂O₃-ZrO₂, Co/Al₂ O₃-ZrO₂ and Ni-Co/Al₂O₃-ZrO₂ catalysts. Their properties were characterized by N₂ adsorption (BET), thermogravimetric analysis (TGA), temperature-programmed reduction (TPR), temperature-programmed desorption (CO₂-TPD), and temperature-programmed surface reaction (CH₄-TPSR and CO₂-TPSR). Ni-Co/Al₂O₃-ZrO₂ bimetallic catalyst has good performance in the reduction of active components Ni, Co and CO₂ adsorption. Compared with mono-metallic catalyst, bimetallic catalyst could provide more active sites and CO₂ adsorption sites (C + CO₂ = 2CO) for the methane-reforming reaction, and a more appropriate force formed between active components and composite support (SMSI) for the catalytic reaction. According to the CH₄-CO₂-TPSR, there were 80.9% and 81.5% higher CH₄ and CO₂ conversion over Ni-Co/Al₂O₃-ZrO₂ catalyst, and its better resistance to carbon deposition, less than 0.5% of coke after 4 h reaction, was found by TGA. The high activity and excellent anti-coking of the Ni-Co/Al₂O₃-ZrO₂ catalyst were closely related to the synergy between Ni and Co active metal, the strong metal-support interaction and the use of composite support.     

Synergistic effect of Pd in methane combustion PdMnOx/Al2O3 catalysts

The catalytic methane combustion was investigated over alumina-supported monometallic and bimetallic palladium and manganese oxide catalysts. The catalytic activity of these systems showed that palladium incorporation on MnO_x/Al₂O₃ catalyst leads to an enhancement in methane combustion. The higher catalytic activity of the PdMn/Al₂O₃ catalysts is related to a greater mobility of lattice oxygen in manganese oxide in the presence of palladium. These bimetallic catalysts also showed a significant improvement in catalysts stability with respect the monometallic ones. Surface analysis of the used catalysts revealed less amount of coke and Mn/Al and Pd/Al atomic ratios almost unchanged, which is indication of absence of active phase sintering.     

Synthesis of nickel catalysts supported on Zr-doped ordered mesoporous Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and their catalytic performance for low-temperature CO<Subscript>2</Subscript> reforming of CH<Subscript>4</Subscript>

A series of Zr-doped ordered mesoporous Al₂O₃ with various Zr contents were synthesized by evaporation-induced self-assembly strategy and the Ni-based catalysts supported on these Al₂O₃ materials were prepared by impregnation method. These catalysts with large specific surface area, big pore volume, uniform pore size possess excellent catalytic performance for the low-temperature carbon dioxide reforming of methane. The activities of these catalysts were tested in carbon dioxide reforming of methane reaction with temperature increasing from 500 to 650?°C and the stabilities of these catalysts were evaluated for long time reaction at 650?°C. It was found that when Zr/(Zr?+?Al) molar ratio?=?0.5%, the Ni/0.5ZrO₂–Al₂O₃ catalyst showed the highest activity, and exhibited superior stabilization compared to the Ni-based catalyst supported on traditional ordered mesoporous Al₂O₃. The “confinement effect” from mesoporous channels of alumina matrix is helpful to stabilize the Ni nanoparticles. As a promoter, Zr could stabilize the ordered mesoporous framework by reacting with Al₂O₃ to form ZrO₂–Al₂O₃ solid solution. Since ZrO₂ enhances the dissociation of carbon dioxide, more oxygen intermediates are given to remove the carbon formed during the reaction.     

Oxidative reforming of methane on structured Ni-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/cordierite catalysts

The catalytic properties of Ni/Al₂O₃ composites supported on ceramic cordierite honeycomb monoliths in oxidative methane reforming are reported. The prereduced catalyst has been tested in a flow reactor using reaction mixtures of the following compositions: in methane oxidation, 2–6% CH₄, 2–9% O₂, Ar; in carbon dioxide and oxidative carbon dioxide reforming of methane, 2–6% CH₄, 6–12% CO₂, and 0–4% O₂, and Ar. Physicochemical studies include the monitoring of the formation and oxidation of carbon, the strength of the Ni-O bond, and the phase composition of the catalyst. The structured Ni-Al₂O₃ catalysts are much more productive in the carbon dioxide reforming of methane than conventional granular catalysts. The catalysts performance is made more stable by regulating the acid-base properties of their surface via the introduction of alkali metal (Na, K) oxides to retard the coking of the surface. Rare-earth metal oxides with a low redox potential (La₂O₃, CeO₂) enhance the activity and stability of Ni-Al₂O₃/cordierite catalysts in the deep and partial oxidation and carbon dioxide reforming of methane. The carbon dioxide reforming of methane on the (NiO + La₂O₃ + Al₂O₃)/cordierite catalyst can be intensified by adding oxygen to the gas feed. This reduces the temperature necessary to reach a high methane conversion and does not exert any significant effect on the selectivity with respect to H₂.     

Activity,selectivity, and methanol tolerance of novel carbon-supported Pt and Pt<Subscript>3</Subscript>Me (Me = Ni,Co) cathode catalysts

The activity, selectivity, and methanol tolerance of novel, carbon supported high-metal loading (40 wt.%) Pt/C and Pt₃Me/C (Me = Ni, Co) catalysts for the O₂ reduction reaction (ORR) were evaluated in model studies under defined mass transport and diffusion conditions, by rotating (ring) disk and by differential electrochemical mass spectrometry. The catalysts were synthesized by the organometallic route, via deposition of pre-formed Pt and Pt₃Me pre-cursors followed by their decomposition into metal nanoparticles. Characteristic properties such as particle sizes, particle composition and phase formation, and active surface area, were determined by transmission electron microscopy, energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and X-ray diffraction. For comparison, commercial Pt/C catalysts (20 and 40 wt.%, E-Tek, Somerset, NJ, USA) were investigated as well, allowing to evaluate Pt loading effects and, by comparison with the pre-cursor-based catalyst with their much smaller particle sizes (1.7 nm diameter), also particle size effects. Kinetic parameters for the ORR were evaluated; the ORR activities of the bimetallic catalysts and of the synthesized Pt/C catalyst were comparable and similar to that of the high-loading commercial Pt/C catalyst; at typical cathode operation potentials H₂O₂ formation is negligible for the synthesized catalysts. Due to their lower methanol oxidation activity the bimetallic catalysts show an improved methanol tolerance compared to the commercial Pt/C catalysts. The results indicate that the use of very small particle sizes is a possible way to achieve reasonably good ORR activities at an improved methanol tolerance at DMFC cathode relevant conditions.     

Renewable hydrogen production by steam reforming of glycerol over Ni/CeO<Subscript>2</Subscript> catalyst prepared by precipitation deposition method

Catalytic steam reforming of glycerol for renewable hydrogen generation has been investigated over Ni/CeO₂ catalyst prepared by precipitation-deposition method. The fresh and used catalysts were characterized by surface area and pore size analysis, X-ray diffraction patterns and scanning electron micrographs. Reforming experiments were carried out in a fixed bed tubular reactor at different temperatures (400–700 °C), glycerol concentrations (5–15 wt%) and contact times. (W/F _Ao =2−80 g-cat·h/mol of glycerol). The investigation revealed that the Ni/CeO₂ catalyst prepared by the above method is effective to produce high yield of hydrogen up to 5.6 (moles of H₂/moles of glycerol fed). The formation of methane and carbon monoxide was greatly reduced over this catalyst. Significantly low amount of coke deposition was observed on the CeO₂ supported catalyst. From the kinetic analysis, the activation energy for the steam reforming of glycerol was found to be 36.5 kJ/mol.     

Effects of La<Subscript>2</Subscript>O<Subscript>3</Subscript> on ZrO<Subscript>2</Subscript> supported Ni catalysts for autothermal reforming of CH<Subscript>4</Subscript>

The effect of La₂O₃ content in Ni-La-Zr catalyst was investigated for the autothermal reforming (ATR) of CH₄. The catalysts were prepared by the coprecipitation method and had a mesoporous structure. Temperature programmed reduction (TPR) and X-ray photoelectron spectroscopy (XPS) indicated that a strong interaction developed between Ni species and the support with the addition of La₂O₃. Thermogravimetric analysis (TGA) and H₂-pulse chemisorption showed that the addition of La₂O₃ led to well dispersed NiO molecules on the support. Ni-La-Zr catalysts gave much higher CH₄ conversion than Ni-Zr catalyst. The Ni-La-Zr containing 3.2 wt% La₂O₃ showed the highest activity. The optimum conditions for maximal CH₄ conversion and H₂ yield were H₂O/CH₄=1.00, O₂/CH₄=0.75. Under these conditions, CH₄ conversion of 83% was achieved at 700 °C. In excess O₂ (O₂/CH₄>0.88), the catalytic activity was decreased due to sintering of the catalyst.     

Unexpected Support Effect in Hydrotreating: Evidence of a Metallic Character for ReS<Subscript>2</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and ReS<Subscript>2</Subscript>/SiO<Subscript>2</Subscript> Catalysts

Abstract  

Rhenium sulfide based catalysts were prepared by the incipient wetness impregnation method over alumina and silica supports and evaluated for 4,6-dimethyldibenzothiophene hydrodesulfurization in a high-pressure stirred-tank reactor. The catalyst prepared over silica was about six times more active for hydrodesulfurization than the corresponding catalyst prepared over alumina and a NiMo/Al₂O₃ industrial reference catalyst. This surprising and positive SiO₂ support effect was explained by a metallic character of the supported sulfide, which was demonstrated using a kinetic approach of competitive hydrogenations and by XPS characterization.     

CO<Subscript>2</Subscript> methanation and co-methanation of CO and CO<Subscript>2</Subscript> over Mn-promoted Ni/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts

A series of Mn-promoted 15 wt-% Ni/Al₂O₃ catalysts were prepared by an incipient wetness impregnation method. The effect of the Mn content on the activity of the Ni/Al₂O₃ catalysts for CO₂ methanation and the comethanation of CO and CO₂ in a fixed-bed reactor was investigated. The catalysts were characterized by N2 physisorption, hydrogen temperature-programmed reduction and desorption, carbon dioxide temperature-programmed desorption, X-ray diffraction and highresolution transmission electron microscopy. The presence of Mn increased the number of CO₂ adsorption sites and inhibited Ni particle agglomeration due to improved Ni dispersion and weakened interactions between the nickel species and the support. The Mn-promoted 15 wt-% Ni/Al₂O₃ catalysts had improved CO₂ methanation activity especially at low temperatures (250 to 400 °C). The Mn content was varied from 0.86% to 2.54% and the best CO₂ conversion was achieved with the 1.71Mn-Ni/Al₂O₃ catalyst. The co-methanation tests on the 1.71Mn-Ni/Al₂O₃ catalyst indicated that adding Mn markedly enhanced the CO₂ methanation activity especially at low temperatures but it had little influence on the CO methanation performance. CO₂ methanation was more sensitive to the reaction temperature and the space velocity than the CO methanation in the co-methanation process.

Open image in new window

     

Aqueous-Phase Hydrogenolysis of Glycerol to 1,3-propanediol Over Pt-H<Subscript>4</Subscript>SiW<Subscript>12</Subscript>O<Subscript>40</Subscript>/SiO<Subscript>2</Subscript>

Abstract  

Hydrogenolysis of glycerol to 1,3-propanediol in aqueous-phase was investigated over Pt-H₄SiW₁₂O₄₀/SiO₂ bi-functional catalysts with different H₄SiW₁₂O₄₀ (HSiW) loading. Among them, Pt-15HSiW/SiO₂ showed superior performance due to the good dispersion of Pt and appropriate acidity. It is found that Br?nsted acid sites facilitate to produce 1,3-PDO selectively confirmed by Py-IR. The effects of weight hourly space velocity, reaction temperature and hydrogen pressure were also examined. The optimized Pt-HSiW/SiO₂ catalyst showed a 31.4% yield of 1,3-propanediol with glycerol conversion of 81.2% at 200 °C and 6 MPa.     

Direct Synthesis of Dimethyl Carbonate from Methanol and Carbon Dioxide over Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>/Ce<Subscript>0.6</Subscript>Zr<Subscript>0.4</Subscript>O<Subscript>2</Subscript> Catalysts: Effect of Acidity and Basicity of the Catalysts

Abstract  

Ce _X Zr_1−X O₂ catalysts with different cerium content (X) (X = 0, 0.2, 0.4, 0.5, 0.6, 0.8, and 1.0) were prepared by a sol–gel method for use in the direct synthesis of dimethyl carbonate from methanol and carbon dioxide. Among these catalysts, Ce_0.6Zr_0.4O₂ was found to show the best catalytic performance. In order to enhance the acidity and basicity of Ce_0.6Zr_0.4O₂ catalyst, Ga₂O₃ was supported on Ce_0.6Zr_0.4O₂ (XGa₂O₃/Ce_0.6Zr_0.4O₂ (X = 1, 5, 10, and 15)) by an incipient wetness impregnation method with a variation of Ga₂O₃ content (X, wt%). Effect of acidity and basicity of Ga₂O₃/Ce_0.6Zr_0.4O₂ on the catalytic performance in the direct synthesis of dimethyl carbonate was investigated using NH₃-TPD and CO₂-TPD experiments. Experimental results revealed that both acidity and basicity of the catalysts played a key role in determining the catalytic performance in the direct synthesis of dimethyl carbonate from methanol and carbon dioxide. Large acidity and basicity of the catalyst facilitated the formation of dimethyl carbonate. The amount of dimethyl carbonate produced over XGa₂O₃/Ce_0.6Zr_0.4O₂ catalysts increased with increasing both acidity and basicity of the catalysts. Among the catalysts tested, 5Ga₂O₃/Ce_0.6Zr_0.4O₂, which retained the largest acidity and basicity, showed the best catalytic performance in the direct synthesis of dimethyl carbonate from methanol and carbon dioxide.     

Partial oxidation of methane to synthesis gas over α-Al2O3-supported bimetallic Pt–Co catalysts

The partial oxidation of methane to synthesis gas was studied at atmospheric pressure and in the temperature range of 550–800°C over -Al₂O₃-supported bimetallic Pt–Co, and monometallic Pt and Co catalysts, respectively. Both methane conversion and CO selectivity over a bimetallic Pt_0.5Co₁ catalyst were higher than those over monometallic Pt_0.5 and Co₁ catalysts. Furthermore, the addition of platinum in Pt–Co bimetallic catalysts effectively improved their resistance to carbon deposition with no coking occurring on Pt_0.5Co₁ during 80 h reaction. The FTIR study of CO adsorption observed only linearly bonded CO on bimetallic Pt–Co catalysts. TPR and XPS showed enhanced formation of a cobalt surface phase (CSP) in bimetallic Pt–Co catalysts. The origins of the good coking resistivity of bimetallic Pt–Co catalysts were discussed.     

Single-step polyol synthesis of alloy Pt<Subscript>7</Subscript>Sn<Subscript>3</Subscript> versus bi-phase Pt/SnO<Subscript>x</Subscript> nano-catalysts of controlled size for ethanol electro-oxidation

Disordered alloy and bi-phase PtSn nanoparticles of nominal Pt:Sn ratio of 70:30 atomic % with controlled size and narrow size distribution were synthesized using a single-step polyol method. By adjusting the solution pH it was possible to obtain Pt₇Sn₃ nanoparticles of various sizes from 2.8 to 6.5 nm. We found that the presence of NaOH in the synthesis solution not only influenced the nanoparticle size, but as it was revealed by XRD, it apparently also dictated the degree of Pt and Sn alloying. Three catalysts prepared at lower NaOH concentrations (C_NaOH < 0.15 M) showed disordered alloy structure of the nominal composition, while the other three catalysts synthesized at higher NaOH concentrations (C_NaOH > 0.15 M) consisted of bi-phase nanoparticles comprising a crystalline phase close to that of pure Pt together with an amorphous Sn phase. These observations are plausibly due to the phase separation and formation of monometallic Pt and amorphous SnO_x phases. A proposed reaction mechanism of Pt₇Sn₃ nanoparticle formation is presented to explain these observations along with the catalytic activities measured for the six synthesized carbon-supported Pt₇Sn₃ catalysts. The highest catalytic activity towards ethanol electro-oxidation was found for the carbon-supported bi-phase catalyst that formed the largest Pt (6.5 nm) nanoparticles and SnO_x phase. The second best catalyst was a disordered alloy Pt₇Sn₃ catalyst with the second largest nanoparticle size (5 nm), while catalysts of smaller size (4.5–4.6 nm) but different structure (disordered alloy vs. bi-phase) showed similar catalytic performance inferior to that of the 5 nm disordered alloy Pt₇Sn₃ catalyst. This work demonstrated the importance of producing bi-metallic PtSn catalysts with large Pt surfaces in order to efficiently electro-oxidize ethanol.     

Catalytic performance of CuCl<Subscript>2</Subscript>-modified V<Subscript>2</Subscript>O<Subscript>5</Subscript>-WO<Subscript>3</Subscript>/TiO<Subscript>2</Subscript> catalyst for Hg<Superscript>0</Superscript> oxidation in simulated flue gas

CuCl₂-SCR catalysts prepared by an improved impregnation method were studied to evaluate the catalytic performance for gaseous elemental mercury (Hg⁰) oxidation in simulated flue gas. Hg⁰ oxidation activity of commercial SCR catalyst was significantly improved by the introduction of CuCl₂. Nitrogen adsorption, XRD, XRF and XPS were used to characterize the catalysts. The results indicated that CuCl₂ was well loaded and highly dispersed on the catalyst surface, and that CuCl₂ played an important role for Hg⁰ catalytic oxidation. The effects of individual flue gas components on Hg⁰ oxidation were also investigated over CuCl₂-SCR catalyst at 350 oC. The co-presence of NO and NH₃ remarkably inhibited Hg⁰ oxidation, while this inhibiting effect was gradually scavenged with the decrease of GHSV. Further study revealed the possibility of simultaneous removal of Hg⁰ and NO over CuCl₂-SCR catalyst in simulated flue gas. The mechanism of Hg⁰ oxidation was also investigated.     

A Novel Process for Renewable Methane Production: Combining Direct Air Capture by K<Subscript>2</Subscript>CO<Subscript>3</Subscript>/Alumina Sorbent with CO<Subscript>2</Subscript> Methanation over Ru/Alumina Catalyst

CO₂ methanation over supported ruthenium catalysts is considered to be a promising process for carbon capture and utilization and power-to-gas technologies. In this work 4% Ru/Al₂O₃ catalyst was synthesized by impregnation of the support with an aqueous solution of Ru(OH)Cl₃, followed by liquid phase reduction using NaBH₄ and gas phase activation using the stoichiometric mixture of CO₂ and H₂ (1:4). Kinetics of CO₂ methanation reaction over the Ru/Al₂O₃ catalyst was studied in a perfectly mixed reactor at temperatures from 200 to 300 °C. The results showed that dependence of the specific activity of the catalyst on temperature followed the Arrhenius law. CO₂ conversion to methane was shown to depend on temperature, water vapor pressure and CO₂:H₂ ratio in the gas mixture. The Ru/Al₂O₃ catalyst was later tested together with the K₂CO₃/Al₂O₃ composite sorbent in the novel direct air capture/methanation process, which combined in one reactor consecutive steps of CO₂ adsorption from the air at room temperature and CO₂ desorption/methanation in H₂ flow at 300 or 350 °C. It was demonstrated that the amount of desorbed CO₂ was practically the same for both temperatures used, while the total conversion of carbon dioxide to methane was 94.2–94.6% at 300 °C and 96.1–96.5% at 350 °C.     

Fischer–Tropsch synthesis on mono- and bimetallic Co and Fe catalysts supported on carbon nanotubes

An extensive study of Fischer–Tropsch synthesis (FTS) on carbon nanotubes (CNTs)-supported bimetallic cobalt/iron catalysts is reported. Up to 4 wt.% of iron is added to the 10 wt.% Co/CNT catalyst by co-impregnation. The physico-chemical properties, FTS activity and selectivity of the bimetallic catalysts were analyzed and compared with those of 10 wt.% monometallic cobalt and iron catalysts at similar operating conditions (H₂/CO = 2:1 molar ratio, P = 2 MPa and T = 220 °C). The metal particles were distributed inside the tubes and the rest on the outer surface of the CNTs. For iron loadings higher than 2 wt.%, Co–Fe alloy was revealed by X-ray diffraction (XRD) techniques. 0.5 wt.% of Fe enhanced the reducibility and dispersion of the cobalt catalyst by 19 and 32.8%, respectively. Among the catalysts studied, cobalt catalyst with 0.5% Fe showed the highest FTS reaction rate and percentage CO conversion. The monometallic iron catalyst showed the minimum FTS and maximum water–gas shift (WGS) rates. The monometallic cobalt catalyst exhibited high selectivity (85.1%) toward C₅+ liquid hydrocarbons, while addition of small amounts of iron did not significantly change the product selectivity. Monometallic iron catalyst showed the lowest selectivity for 46.7% to C₅+ hydrocarbons. The olefin to paraffin ratio in the FTS products increased with the addition of iron, and monometallic iron catalyst exhibited maximum olefin to paraffin ratio of 1.95. The bimetallic Co–Fe/CNT catalysts proved to be attractive in terms of alcohol formation. The introduction of 4 wt.% iron in the cobalt catalyst increased the alcohol selectivity from 2.3 to 26.3%. The Co–Fe alloys appear to be responsible for the high selectivity toward alcohol formation.     

Support effect on the low-temperature hydrogenation of benzene over PtCo bimetallic and the corresponding monometallic catalysts

PtCo bimetallic and Co, Pt monometallic catalysts supported on γ-Al₂O₃, SiO₂, TiO₂ and activated carbon (AC) were prepared and evaluated for the hydrogenation of benzene at relatively low temperatures (343 K) and atmospheric pressure. Results from flow reactor studies showed that supports strongly affected the catalytic properties of different bimetallic catalysts. AC supported PtCo bimetallic catalysts exhibited significantly better performance than the other bimetallic catalysts, and all the bimetallic catalysts possessed higher activity than the corresponding monometallic catalysts. Results from CO chemisorption and H₂-temperature-programmed reduction (H₂-TPR) studies suggested that different catalysts possessed different properties in chemisorption capacity and reduction behavior, and AC supported PtCo catalysts possessed significantly higher CO chemisorption capacity compared to the other catalysts. Extended X-ray absorption fine structure (EXAFS) and transmission electron microscopy (TEM) analysis provided additional information regarding the formation of Pt–Co bimetallic bonds and metallic particle size distribution in the PtCo bimetallic catalysts on different supports.     

Preparation of H<Subscript>5</Subscript>PMo<Subscript>10</Subscript>V<Subscript>2</Subscript>O<Subscript>40</Subscript> catalyst immobilized on spherical carbon and its application to the vapor-phase 2-propanol conversion reaction

Spherical carbon (SC) with a diameter of ca. 9 μm was synthesized by a hydrothermal method using sucrose as a carbon precursor. The spherical carbon was then modified to have a positive charge, and thus, to provide a site for the immobilization of H₅PMo₁₀V₂O₄₀ (PMo₁₀V₂) catalyst. The PMo₁₀V₂ catalyst was immobilized on the surface-modified spherical carbon by taking advantage of the overall negative charge of [PMo₁₀V₂O₄₀]⁵⁻. The PMo₁₀V₂ catalyst immobilized on the spherical carbon (PMo₁₀V₂/SC) was applied to the vapor-phase 2-propanol conversion reaction. In the catalytic reaction, the PMo₁₀V₂/SC catalyst showed a higher 2-propanol conversion than the unsupported PMo₁₀V₂ catalyst. Furthermore, the PMo₁₀V₂/SC catalyst showed enhanced oxidation catalytic activity (formation of acetone) and the suppressed acid catalytic activity (formation of propylene and isopropyl ether) compared to the unsupported PMo₁₀V₂ catalyst. The enhanced oxidation activity of PMo₁₀V₂/SC catalyst was due to the fine dispersion of [PMo₁₀V₂O₄₀]⁵⁻ on the spherical carbon formed via chemical immobilization.