共查询到20条相似文献,搜索用时 109 毫秒
1.
针对几起由6kV真空断路器真空泡泄真空导致的事故,论述了检测真空度的方法──交流耐压试验法,并提出了现场对几种试验接线方式的看法,认为有条件的现场应在有关变压器厂订制一种高压线圈有中间抽头的试验变压器,专门对真空断路器断口进行交流耐压试验。 相似文献
2.
3.
4.
5.
正不同厂家的12kV真空断路器和开关柜配合验证工频耐压42kV/1min时,很多时候不能通过工频耐压试验。基于现场情况,提出了改进措施,快速解决现场绝缘问题;以及在设计上优化断路器和开关柜,根本上提高配合时的绝缘性能,满足工频耐压42kV/1min要求,减少现场改造工作量。真空断路器的绝缘介质高真空,且具有体积小、重量轻、适用于频繁操作和灭弧不用检修的优点,广泛应用于10 kV电力系统中。现有真空断路器极柱主要有环氧树脂材料和尼龙材料,两者都具 相似文献
6.
7.
8.
为查找35 kV户外真空断路器绝缘击穿故障原因,对ZW7-40.5型真空断路器进行了交流耐压、瓷套绝缘电阻试验。分析了该型号的断路器外绝缘采用真空绝缘脂,此绝缘脂属于液体绝缘介质,设备在运行及安装过程中,会增加液体介质水分含量,易导致绝缘击穿引起设备故障。通过分析交流耐压试验数据,找到了绝缘击穿故障部位。介绍了绝缘击穿事故处理的查找方法,提出了避免断路器击穿的防范措施。 相似文献
9.
介绍一种处理真空断路器触头的新方法,比较了它与以前所用其它方法的不同点。实验结果证明它可以有效提高真空断路器弧后耐压强度、减少真空断路器弧后重击穿的几率。 相似文献
10.
介绍了串联谐振法和并联谐振法进行交流耐压试验的原理,并对1例串联谐振进行500kV罐式断路器交流耐压试验出现的问题,提出了相应的解决方法。 相似文献
11.
12.
13.
14.
对断路器电容器介损随电压变化的规律、机理、运行的影响及预防性试验中的处理方法进行了研究,并对制造和使用提出了合理化建议。 相似文献
15.
《Power Delivery, IEEE Transactions on》2001,16(3):415-421
The paper shows that there may be substantial discrepancies regarding delayed current zeros and circuit-breaker arc energies when exposing a generator circuit-breaker to a short-circuit in a real system or in a test lab. Depending on the pre-loading of the generator in the real system the degree of asymmetry may be far higher than that being adjustable in a test lab. Based on realistic generator data the courses of the short-circuit currents have been simulated for various cases also taking into account the arc voltages of different circuit-breaker types. For the same breaking current zero crossings may be delayed for several periods and arc energies may be substantially different in the real system compared to the test lab. Improved generator modeling is indispensable for correct simulation of such phenomena and explains more over “voltage depression” 相似文献
16.
17.
针对即将实施的断路器新版标准GB 14048.2—2008,从电磁兼容性试验角度分析其与旧标准的差异。按照产品分类,对于附录J、F、B、N中相关试验内容和要求的差异进行说明,指出了制造商和试验人员在进行3C认证试验时应注意的问题。 相似文献
18.
High-voltage circuit-breakers have reached such high short-circuit breaking capabilities that they must be tested in synthetic circuits with separate current and voltage sources. As the main performance to be verified by type tests is the interruption of three-phase faults, it is desirable whenever possible to perform three-phase tests. Three-phase synthetic testing is rather new and not covered by ANSI/IEEE and IEC standards. The purpose of this paper is to present a procedure for three-phase synthetic testing which can properly test the circuit-breaker at a reasonable cost, i.e., a number of tests using a limited number of circuit-breaker specimens for the entire series of type tests 相似文献
19.
断路器闭锁分合闸是一种常见的电力设备故障,不同的主接线方式下,隔离闭锁断路器的方法及技巧都不同。以广东电网的几种典型接线方式为例,设置了不同的背景条件,探讨、总结出隔离闭锁断路器各种具有代表性的操作方法。 相似文献
20.
某500 kV线路投运期间,一台SF6断路器发生内部闪络,根据调试记录电压电流波形对疑似故障相进行解体检查,解体发现了闪络点和SF6分解物。文章分析了断路器发生内部闪络的原因,并提出了应对措施。 相似文献