共查询到19条相似文献,搜索用时 156 毫秒
1.
2.
强酸性离子交换树脂作为丙烯酸酯化反应催化剂的性能研究 总被引:1,自引:0,他引:1
本文以丙烯酸、正辛醇为原料,强酸性离子交换树脂作为催化剂,催化酯化反应。考察了催化剂用量、种类、以及催化剂循环使用次数对酯化率的影响,并考察了催化剂的使用温度范围。结果表明,NKC-9型强酸性离子交换树脂具有良好的催化活性,在醇酸摩尔比为1.2∶1,催化剂用量为酸醇总质量的7%,105℃下回流分水5.0h的反应条件下,最高酯化率可达97.8%;并且该强酸性离子交换树脂的催化性能比较稳定,可以多次循环使用,重复使用10次时,其酯化率仍在90%以上,从而可实现易分离、可循环的目的。 相似文献
3.
4.
5.
简述了己二腈催化加氢的反应机理;根据催化剂形式的不同;综述了己二腈加氢制备已二胺催化剂的研究进展;介绍了Zlegler型催化剂及贵金属络合物均相催化剂、雷尼镍(Raney Ni)型催化剂及非负载型多相催化剂在己二腈催化加氢制备己二胺的应用及其优缺点;详述了负载型催化剂的研究进展及加氢效果;指出工业生产中以Raney Ni型催化剂为主,但使用寿命及环保方面限制其发展,而负载型催化剂在己二腈催化加氢具有较好的应用前景;建议今后应进一步探索己二腈催化加氢中的不同产物生成机理,改进活体的负载方式及助催化剂的研究。 相似文献
6.
7.
8.
9.
10.
11.
二氧化碳和甲醇直接合成碳酸二甲酯研究进展 总被引:2,自引:1,他引:1
从均相及多相催化剂体系和反应条件等方面,综述了近年来二氧化碳和甲醇直接合成碳酸二甲酯的研究开发最新进展。介绍了均相催化剂体系包括有机金属烷氧基化合物、碱土金属烷氧基化合物、碱性催化剂和乙酸盐催化剂;多相催化剂体系包括负载型金属催化剂、负载型固体碱催化剂和氧化物催化剂。对催化剂及反应体系的设计、光催化剂、杂多酸催化剂、离子液体体系、助催化剂及吸水剂的使用、微波加热、膜反应器以及超临界二氧化碳溶剂体系进行了评述。 相似文献
12.
13.
14.
From ion exchange resins to polymer‐supported reagents: an evolution of critical variables
下载免费PDF全文
![点击此处可从《Journal of chemical technology and biotechnology (Oxford, Oxfordshire : 1986)》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Spiro D Alexandratos 《Journal of chemical technology and biotechnology (Oxford, Oxfordshire : 1986)》2018,93(1):20-27
The concept of immobilizing ligands onto cross‐linked polymer supports is presented as an evolution of a concept that begins with ion exchange resins and evolves into ion‐selective polymers, polymer‐supported catalysts, and the general area of polymer‐supported reagents. Each of the four categories of polymers is defined by a set of major variables {electrostatic attraction (for ion exchange resins); steric, geometric, and electronic factors (for ion‐selective polymers); attracting and orienting reactants, and stabilizing the transition state (for polymer‐supported catalysts); and binding reactants with weak or strong forces (for polymer‐supported reagents)} and of minor variables {pH, concentration, competing ions, counterions, ionic strength, hydrophilic/hydrophobic interactions, hydration energies, and polymer crosslink level}. The rational design of each category will require identifying the relationships between major and minor variables and applying the principles inherent to complexity science will be an important focus of future research. © 2017 Society of Chemical Industry 相似文献
15.
负载型碳酸钾催化剂上二氧化碳与1,2-丙二醇合成碳酸丙烯酯反应研究 总被引:1,自引:0,他引:1
在负载型碳酸钾催化剂上对二氧化碳与1,2-丙二醇(PG)合成碳酸丙烯酯(PC)反应进行了研究.结果表明,负载型碳酸钾催化剂的最佳制备条件为:活性炭为载体,碳酸钾负载量为15%(wt),焙烧温度423.15 K.在反应温度443.15 K、催化剂用量为2.0%(wt)、溶剂(乙腈)/PG/二氧化碳(摩尔比)为19.2:3:4、二氧化碳初始压力为2.0 MPa、反应时间12 h的条件下,PG的转化率为12.9%,PC的收率为9.6%,选择性为74.4%.对活性炭负载碳酸钾催化剂进行了XRD分析,发现存在K2CO3和K2O两种晶相.BET分析结果表明,载体的比表面积对负载型碳酸钾催化剂的催化活性有较大影响.与均相碳酸钾催化剂相比,负载型碳酸钾催化剂上PC的选择性提高了40.3%. 相似文献
16.
应用ISEP系统回收氯化铵废液 总被引:5,自引:0,他引:5
ISEP系统是一种连续型离子交换系统,能彻底解决氯化铵废液的污染问题,并能减少树脂用量,降低碳酸钾的生产成本,有巨大的经济效益 相似文献
17.
Naturally occurring polyphenol(condensed tannin)-phenol-formaldehyde copolymer matrix based cation exchange resins have been successfully used as a solid catalyst (in H+ ion form) in the inversion of sucrose and hydrolysis of methyl acetate. Apart from the normal advantages of the solid catalyst over the acid catalysts in the solution phase, the values of the activation energy, entropy, and enthalpy of activation of the reactions involved reveal that the resins prepared acted as a catalyst with characteristics comparable to those of the commercially available resins based on a styrene–DVB matrix. The resins have also been successfully used for softening of hard water and enrichment of metal ion concentration from very dilute solutions. © 1995 John Wiley & Sons, Inc. 相似文献
18.
碳酸二甲酯与苯酚酯交换合成碳酸二苯酯研究 总被引:6,自引:0,他引:6
选择Lewis酸催化剂、分子筛催化剂、有机钛和锡化合物催化剂和不同负载型金属氧化物催化剂用于碳酸二甲酯(DMC)与苯酚酯交换合成碳酸二苯酯(DPC)的过程。试验结果表明,:MoO3/SiO2和TiO2/SiO2催化剂对该反应具有相对较好的催化活性和选择性。以MoO3/SiO2为催化剂,DMC转化率和DPC选择性分别为24.3%和37.6%;以TiO2/SiO2,为催化剂,DMC转化率和DPC选择性分别为13.7%和20.0%。在该酯交换反应中,SiO2与Al2O3和MgO相比,是一种良好的催化剂载体。 相似文献
19.
负载型金属催化剂因为其独特的催化性能在众多领域得到广泛应用。传统的催化剂制备方法有浸渍法,沉淀法,离子交换法和熔融法等。文章综述了溶剂化金属原子浸渍法,超临界技术和微波技术在负载型金属催化剂制备中的应用。 相似文献