Six-year clinical evaluation of HTR synthetic bone grafts in human grade II molar furcations

A biocompatible microporous composite of PMMA (poly-methyl-methacrylate), PHEMA (poly-hydroxy-ethyl-methacrylate) and calcium hydroxide bone replacement graft material (Bioplant HTR Synthetic Bone) was evaluated in 16 maxillary molar and 10 mandibular molar Grade II furcations in 13 patients. Following initial preparation, full thickness flaps were raised to gain access to the furcations; mechanical hand and ultrasonic root and defect debridement and chemical tetracycline root preparation were performed; furcation and adjacent osseous defects in each patient were grafted with HTR Synthetic Bone; and the host flaps replaced or slightly coronally positioned. Weekly, then monthly deplaquing was performed until surgical re-entry at 6-12 months. Patients were then followed on approximate 3-month recalls for > or = 6 yr. Evaluation of the primary clinical outcome of furcation grade change showed that in the maxilla 5/16 furcations were clinically closed, 9/16 were Grade I, and 2/16 remained Grade II; while in the mandible 3/10 were clinically closed, 5/10 were Grade I, and 2/10 remained Grade II. Other significant clinical changes included decrease in mean horizontal furcation probing attachment level from 4.4 mm at surgery to 2.2 mm at re-entry to 2.0 mm at 6 yr, decrease in probing pocket depth from 5.4 mm at surgery to 3.0 mm at re-entry to 3.2 mm at 6 yr, and improvement in vertical clinical probing attachment level from 5.4 mm at surgery to 4.2 mm at re-entry to 4.1 mm at 6 yr (all p < 0.05 from surgery to re-entry and surgery to 6 yr, n.s. from re-entry to 6 yr via ANOVA). These favorable results with HTR polymer are similar to several reports with other graft materials and with GTR barriers, and suggest that HTR polymer may have a beneficial effect in the clinical management of Grade II molar furcations.     

Guided tissue regeneration in Class II furcation involved maxillary molars: a controlled study of 8 split-mouth cases

The purpose of this study was to clinically evaluate the effectiveness of polytetrafluoroethylene membranes in the healing of interproximal Class II furcation defects in maxillary molars using a surgical treatment technique based on the principles of guided tissue regeneration. Eight subjects with similar bilateral Class II furcation lesions on the mesial aspect of maxillary first molars participated in this study. Patients received initial therapy consisting of oral hygiene instructions, scaling and root planing, and occlusal adjustment if necessary. Clinical parameters evaluated included plaque index, sulcular bleeding index, probing depth, attachment level, gingival recession, and open horizontal and vertical furcation fill. An acrylic occlusal stent was used to assure reproducibility of measurements. Experimental sites received a polytetrafluoroethylene membrane following surgical exposure of the furcation. Control sites were treated in the exact same manner but without a membrane. Membranes were removed at 6 weeks after the first surgery. Reentry surgeries were performed at 9 months. Postsurgical results showed a significant improvement in probing depth, attachment level, and open horizontal furcation fill for both groups when compared to baseline values, with experimental sites performing significantly better than controls. Control sites showed a slight loss in open vertical furcation fill while experimental sites remained unchanged. This study suggests that guided tissue regeneration using polytetrafluoroethylene membranes is of some but limited value in the treatment of maxillary molar interpoximal Class II furcation lesions.     

A clinical evaluation of guided tissue regeneration with a bioabsorbable matrix membrane combined with an allograft bone graft. A series of case reports

THE PURPOSE OF THIS STUDY was to evaluate the clinical effectiveness of a surgical technique in treating periodontal defects. The technique combined tetracycline treatment of a root planed root, grafting of the osseous defect with a demineralized freeze-dried bone allograft combined with tetracycline and the placement of a bioabsorbable matrix membrane, made of polylactic acid softened with citric acid ester. Thirty defects were treated in 27 patients. Statistically significant changes, as a result of the surgical procedure, were observed in marginal recession (mean: 0.5 mm), probing depth reductions (mean: 5.7 mm), and attachment level gain (mean: 5.2 mm). No statistically significant difference existed between the results in the furcation and non-furcation groups. The defects with probing depths > or = 10 mm had a greater mean probing depth reduction (7.4 mm) and mean attachment level improvement (7.2 mm) than the defects with < 10 mm probing depths (probing depth reduction 4.5 mm and attachment level gain 3.9 mm). The proposed surgical procedure seemed to be an effective method to treat periodontal defects.     

Fractal characteristics of tumor vascular architecture during tumor growth and regression

BACKGROUND AND OBJECTIVE: Class III periodontal furcations still represent a challenge for the periodontist. Aim of this study was to test the effect of CO2 laser on the treatment of class III furcation defects. STUDY DESIGN/MATERIALS AND METHOD: Class III furcation defects 3 mm deep were surgically induced on mandibular premolars on six male Beagle dogs, for a total of 36 defects. After 6-8 weeks of plaque accumulation, the mean depth was 6.8 mm. Quadrants were randomly assigned to a) CO2 laser therapy (laser), b) Guided Tissue Regeneration (GTR) procedure using Gore-Tex Membranes, (Gore Tex, Flagstaff, Arizona, USA) and c) Scaling and Root planing (Sc/Rp). CO2 laser beam (El.En, Florence, Italy) was applied to the root surfaces in defocused pulsed mode at 2W, 1 Hz and a duty cycle of 6%, and on periodontal soft tissues at 13W, 40 Hz, and a duty cycle of 40%. Control quadrants received either GTR procedure or Sc/Rp. Mechanical oral hygiene was provided. At 6 months the animals were sacrificed. RESULTS: The laser group showed new attachment formation averaging 1.9 mm (sd +/- 0.5), whereas GTR and Sc/Rp showed 0.2 mm (sd +/- 0.4) and 0.2 mm (sd +/- 0.5) respectively, being the differences statistically significant between the laser group and both GTR and Sc/Rp groups (p < 0.005). CONCLUSION: CO2 laser treatment of class III furcation induced formation of new periodontal ligament, cementum and bone.     

A 3-year experience with guided tissue regeneration procedures

The Guided Tissue Regeneration (GTR) procedures are promoting a clinically and radiologically as well as histologically verifiably periodontal attachment gain. The objective of the study was to evaluate the clinical efficacy of these GTR techniques. In the past four years different barrier membranes (Gore-tex, Resolut and Guidor) were used around 318 teeth of 196 patients. 169 periodontal defects of 140 patients were followed up at least for two years. 54 patient had chronic adult type periodontitis, 67 suffered with rapidly progressing periodontitis and 15 had different severe mucogingival lesions. 111 vertical bony defects, 43 Class II-III furcation lesions and 15 mucogingival lesions were surgically corrected. The average preoperative probing depth (PD) and the clinical attachment loss (CAL) of the vertical bony defects were 5.3 +/- 1.7 mm and 6.2 +/- 1.9 mm respectively. The PD of the deepest Class III furcation lesion was 11 mm. The average gingival recession of the mucogingival lesions was 4.5 +/- 1.1 mm. The GTR technique provided the best results in the Class II-III furcation lesions, where an average 2.4 +/- 0.9 clinical attachment gain was observed one year postoperatively. The GTR techniques provided an average 1.8 +/- 1.2 mm attachment gain in the vertical bony crater cases. In both groups of cases a marked gingival recession followed the healing and the periodontal regeneration. In this way the average reduction in the probing depth exceeded the average attachment gain by more that 1.5 mm. 1 year after the operation the average radiologic bone fill was about 0.9-1.2 mm. The resorbable barrier membranes resulted in clinically significant root coverage and an average 3.5 +/- 1.7 mm gain in the width of keratinized gingiva. The success or failure of our cases were mainly determined by the patient's compliance, the level of the postoperative professional and individual oral hygiene and the number of periodontal recalls. These findings are also underlining the importance of the high standard of oral hygiene in the postoperative periodontal regeneration.     

Clinical comparison of bioabsorbable barriers with non-resorbable barriers in guided tissue regeneration in the treatment of human intrabony defects

The purpose of the study was to compare the effects of guided tissue regeneration (GTR) with expanded polytetrafluoroethylene (ePTFE) non-resorbable barriers and polylactic acid bioabsorbable barriers in humans with intrabony defects due to periodontitis. Ten patients presented with 2 intrabony defects each. Mucoperiosteal flaps were performed. One of the defects was randomly assigned for placement of the ePTFE barrier over the roots and alveolar bone and the other defect with placement of the polylactic acid barrier. A minimum of 9 months after barrier placement, surgical reentry was performed. The data were evaluated by the Wilcoxon matched-pairs signed-ranks test and the Fisher exact test. Treatment with both types of barriers produced significant changes from baseline for all parameters, except in the ePTFE group for the amount of bony crest resorption (P = 0.055) and in the polylactic acid group for increased recession (P = 0.109). The results showed no significant differences between the barriers for any parameters: probing depth reduction (polylactic acid 2.60 +/- 1.90, ePTFE 2.80 +/- 1.40; P = 1.000); attachment gain (polylactic acid 1.40 +/- 1.43, ePTFE 1.90 +/- 1.29; P = 0.336); increased recession (polylactic acid 0.80 +/- 1.40, ePTFE 1.10 +/- 0.99; P = 0.531); amount of vertical bone fill (polylactic acid 1.60 +/- 1.84, ePTFE 2.00 +/- 2.49; P = 0.984); bony crest resorption (polylactic acid -1.30 +/- 1.06, ePTFE -1.30 +/- 1.63; P = 1.000); depth of bony defect reduction (polylactic acid 2.90 +/- 1.20, ePTFE 3.30 +/- 1.70; P = 0.750); width of bony defect reduction (polylactic acid 2.20 +/- 1.23, ePTFE 2.20 +/- 1.23; P = 0.875); or volumetric changes (polylactic acid 33.50 +/- 19.70 microl, ePTFE 34.00 +/- 18.40 microl; P = 0.750).     

Comparative in vitro effectiveness of closed root debridement with fine instruments on specific areas of mandibular first molar furcations. I. Root trunk and furcation entrance

The purpose of this study was to compare curets with a small blade to slim ultrasonic inserts on their efficacy in removing artificial deposits from the root trunk and furcation entrance areas of mandibular molars using an in vitro model simulating a clinically closed root debridement approach. The study was conducted on 100 artificial mandibular first molars (50 right side and 50 left side) with anatomical roots. Root trunks, furcation entrances, and furcation areas of each molar were colored by a coat of black model paint. The teeth were fixed in a custom acrylic model and maintained in a firm position by modified acrylic occlusal splints. The root areas were covered with a heavy rubber dam imitating gingival tissue. The model was attached to a mannequin and mounted on a dental chair. Fifty molars (25 right, 25 left) were instrumented with the experimental curets and an equivalent number of molars with the ultrasonic inserts. The instrumentation was carried out by one experienced operator, spending 4 minutes on each molar. The instrumented areas were individually analyzed to determine the percentage of deposits remaining, using a computerized imaging routine system. One-way analysis of variance was conducted to test for differences between both types of instruments. Results revealed that the curets were significantly more efficient (P < 0.01) than the ultrasonic inserts in removing paint from both root trunks and furcation entrances. These findings should be corroborated in a clinical study to determine the potential value of the instruments tested during initial therapy or supportive care of involved mandibular furcations.     

Guided tissue regeneration update

The ultimate goal of periodontal therapy is to restore periodontal tissues lost through disease or trauma. The most predictable way to accomplish this goal is by guided tissue regeneration (GTR). The principle of GTR is to give preference to certain cells to repopulate the wound area to form a new attachment apparatus. Clinically this is accomplished by placing a barrier over the defect thereby excluding gingival tissues from the wound during early healing. The first generation of GTR barriers were non-resorbable which implies that they have to be removed in a second surgical procedure. Resorbable barriers have recently been introduced, changing GTR into a single-step procedure. Periodontal defects that will predictably benefit from GTR therapy are intrabony, furcation class II and gingival recession defects. This paper reviews the scientific evidence of what can be achieved by GTR procedures for various periodontal defects as well as factors of importance to increase the predictability of a successful treatment outcome.     

Characterization of mechanisms of interleukin-6 gene repression by estrogen receptor

Some prior reports have suggested that guided tissue regeneration (GTR) procedures achieve only partial regeneration and induces the ankylosis rather than true attachment. Accordingly, others have developed an alternative procedure employing gelatine membrane compounded with bovine cementum particles (CGM) which has proven effective in stimulating a more physiologic form of attachment. This study was undertaken to perform a direct comparison of histological results when CGM and GTR membrane were used at comparable sites in the same monkey. Three monkeys with no periodontal disease were used. Following flap surgery, recession type defects were created on the buccal side of the maxillary lateral incisors and second premolars, and the cementum was removed from the root surface at an area corresponding to the bone crest. The right and left lateral incisors and second premolars were covered with CGM and GTR membrane, respectively. The GTR membranes were removed after 4 weeks. At 6 wks, the animals were sacrificed, and specimens were prepared for histological examination. More coronally placed true new attachment was observed following application of CGM to the planed root surfaces. Application of the GTR membrane resulted in formation of bone-like cementum and ankylosis, whereas CGM established true periodontal regeneration.     

Subpedicle connective tissue graft versus guided tissue regeneration with bioabsorbable membrane in the treatment of human gingival recession defects

The purpose of the present clinical study was to evaluate the effect of guided tissue regeneration (GTR) in comparison to subpedicle connective tissue graft (SCTG) in the treatment of gingival recession defects. A total of 12 patients, each contributing a pair of Miller's Class I or II buccal gingival recessions, was treated. According to a randomization list, one defect in each patient received a polyglycolide/lactide bioabsorbable membrane, while the paired defect received a SCTG. Treatment effect was evaluated 6 months postsurgery. Clinical recordings included full-mouth and defect-specific oral hygiene standards and gingival health, recession depth (RD), recession width (RW), probing depth (PD), clinical attachment level (CAL), and keratinized tissue width (KT). Mean RD significantly decreased from 3.1 mm presurgery to 1.5 mm at 6 months postsurgery for the GTR group (48% root coverage), and from 3.0 mm to 0.5 mm for the SCTG group (81% root coverage). RD reduction and root coverage were significantly greater in SCTG group compared to GTR group. Mean CAL gain amounted to 1.7 mm for the GTR group, and 2.3 mm in the SCTG group. No significant differences in PD changes were observed within and between groups. KT increased significantly from presurgery for both treatment groups, however gingival augmentation was significantly greater in the SCTG group compared to GTR group. Results indicate that: 1) treatment of human gingival recession defects by means of both GTR and SCTG procedures results in clinically and statistically significant improvement of the soft tissue conditions of the defect; and 2) treatment outcome was significantly better following SCTG compared to GTR in terms of recession depth reduction, root coverage, and keratinized tissue increase.     

Evaluation of periosteal membranes and coronally positioned flaps in the treatment of Class II furcation defects: a comparative clinical study in humans

The purpose of this study was to compare the clinical effectiveness of connective tissue grafts including periosteum used as a mechanical barrier for guided periodontal tissue regeneration and coronally positioned flaps in the treatment of Class II furcation defects. A total of 28 furcation defects were treated; 14 received a periosteal barrier and 14 received a coronally positioned flap. Reentry surgeries were performed at 6 months. No statistically significant differences were found preoperatively between the two treatment groups with respect to clinical parameters and osseous measurements. Postsurgically, both treatment modalities resulted in a significant decrease in probing depth and a significant gain in clinical attachment, but the differences observed were not statistically significant. The periosteal barrier group presented with a significantly better gain in vertical components of the alveolar bone (1.93 +/- 0.15 mm and 0.20 +/- 0.26 mm for periosteal barrier and coronally positioned flap groups, respectively; P < or = 0.001) and horizontal components of the alveolar bone (1.60 +/- 0.21 mm and 0.13 +/- 0.90 mm for periosteal barrier and coronally positioned flap groups, respectively; P < or = 0.001). The results of this trial indicate that similar clinical resolution of Class II furcation defects can be obtained with periosteal barriers and coronally positioned flaps. Periosteal barriers, however, are a better treatment alternative in achieving bone fill of the furcation area.     

A morphometric analysis of the furcation region of mandibular molars

This study examined furcation dimensions and morphology in first and second mandibular molar teeth. One hundred thirty-four extracted human mandibular molars with divergent roots were selected. Teeth were viewed at 7X magnification on a dissecting microscope interfaced with a computer equipped with a state-of-the-art histomorphometry software program. Various aspects of furcation anatomy were measured and recorded. Data were examined by using analysis of variance for all paired comparisons. For nonparametric data, the Kruskal Wallis test was used. Results indicated that 61.94% of buccal and 50.75% of lingual molar surfaces presented with cervical enamel projections (CEPs), with the highest frequency noted in second molars. CEPs ranged from 0.98 mm to 1.33 mm, whereas root trunk heights varied between 2.23 mm and 2.93 mm. Generally, lingual molar surfaces had longer root trunks when compared to buccal surfaces. Root separation increased by approximately 0.5 mm at each 1-mm increment apical to the furcal roof. This study provides new information regarding the furcal anatomy of mandibular molar teeth and supplements previous reports that suggest the CEP is a common problem which must be addressed by clinicians when treating molar teeth.     

Effect of mechanical treatment on healing after third molar extraction

The aim of this study was to determine the effect of subgingival scaling and root planing on healing of the distal surface of second molars following extraction of third molars. Twenty-eight patients with contralateral erupted third molars and pocket depths greater than or equal to 3 mm on the distal surface of the second molars participated in this study. Measurements of supragingival bacterial plaque, bleeding on probing, pocket depth, and relative attachment level were performed at baseline and 2 months after treatment. Extraction of contralateral third molars was carried out simultaneously. The experimental site received thorough scaling and root planing of the distal surface of the second molar, while the control site received extraction alone. Experimental sites showed significant improvement in all clinical parameters assessed compared to the control sites. In conclusion, periodontal lesions on the distal of second molars can be significantly improved following scaling and root planing after extraction of third molars.     

Long-term stability of the mucogingival complex following guided tissue regeneration in gingival recession defects

The purpose of the present study was to evaluate the stability of soft tissue conditions in gingival recession defects treated with guided tissue regeneration (GTR). The study population was selected among those patients who had been treated with GTR procedures for Miller's class I or II, deep (> or =3 mm), buccal gingival recession defects. Defects were included only when they had revealed recession depth reduction > or =2 mm and root coverage > or =60% at 6 months following GTR treatment. These defects were regarded as successfully treated and scheduled for further monitoring. 20 patients, 11 male and 9 female, aged 23 to 57 years (mean age: 33.2 years), each contributing 1 defect, were selected. 9 patients were smokers (> or =10 cigarette per day). Recession depth (RD), probing depth (PD), clinical attachment level (CAL), and width of keratinized gingiva (KG) were assessed immediately before surgery, at 6 months post-surgery (baseline examination), and at 4 years post-surgery (4-year examination). At baseline examination, RD reduction was 3.6+/-0.9 mm (mean root coverage: 80%). CAL gain amounted to 4.2+/-1.3 mm, 60% of the defects showing CAL gain > or =4 mm. KG increased from 1.9+/-1.2 mm at presurgery examination to 3.1+/-0.9 mm at baseline examination. At 4-year examination, no significant changes from baseline RD, CAL and KG recordings were observed. Differences in baseline-4 year changes between smokers and non-smokers were not statistically significant. The results of the present study demonstrate that clinical outcome achieved following GTR procedure in gingival recession defects can be maintained over periods up to 4 years.     

Evaluation of a combined surgical repair and guided tissue regeneration technique to treat recent root canal perforations

This study evaluated a technique that included retrofill to repair molar root canal perforations and guided tissue regeneration to restore the periodontium that was removed from the furcation area for access to the sites. Six dogs had root canal therapy on mandibular fourth premolars and first molars. The distal root of each tooth was perforated on the furcation aspect halfway between the furcation and the apex. Replaced flap surgery was performed for access to prepare and fill the perforation site with intermediate Restorative Material. A bone xenograft was placed in the access ostectomy site and covered with GoreTex Augmentation Material (GTAM). Controls included unfilled perforations and not using bone grafts and/or GTAM. Dogs were killed at 6, 12, and 24 wk postsurgery. Complications were more common when root perforations were left unfilled. Histomorphometry revealed a statistically significant decrease in inflammation and more bone fill when root perforations were filled and GTAM was used, respectively.     

The effect of transforming growth factor beta one (TGF-beta 1) on wound healing, with or without barrier membranes, in a Class II furcation defect in sheep

The purpose of this study was to analyse the effect of TFG-beta 1 on wound healing in standardized Class II furcation defects of 48 mandibular second premolar teeth in 24 sheep. The experimental design included a control group (carrier only, 25% pluronic F-127), and 2 experimental groups: group A (80 micrograms/ml TGF-beta 1 + carrier) and group B (80 micrograms/ml TGF-beta 1 + carrier covered with a barrier membrane). Sheep were killed either 2 wk or 6 wk after surgery. Mesiodistal sections of the decalcified specimens were quantified histologically using stereology. Percentage volumes of regenerated bone, fibrous connective tissue and cementum were calculated for each furcation defect. Mean values were analysed using multiple ANOVA; p values were calculated using paired and unpaired Student's t-tests. After 2 wk there was more bone in group B than either of the other 2 groups, but this was not statistically significant. By 6 wk more bone was present in group A than in the control group (p < 0.02) and also in group B when compared with both group A and the control group (p < 0.02 and p < 0.44), respectively. In the 4 wk between sampling significantly more bone had formed (group A < 0.05 and group B p < 0.003, respectively). A negative correlation existed between volumes of bone and fibrous connective tissue and no significant differences between the volumes of cementum were evident between any of the groups. This study demonstrated that TGF-beta 1 encouraged bone regeneration in Class II furcation defects in sheep, an effect enhanced by the presence of a barrier membrane. This is the first report on the use of TGF-beta 1 in conjunction with GTR in periodontal defects.     

Reproducibility and validity of furcation measurements as related to class of furcation invasion

The furcation involvement of 200 molars in 50 patients suffering from advanced periodontitis was investigated. Presurgically, the horizontal probing attachment levels (CAL-H) within the furcations of 4 molars per patient was assessed twice within 14 days. Within a subset of 11 patients duplicate measurements of clinical probing depths (PD) and vertical clinical attachment levels (CAL-V) at the same molars were performed. To determine the measurement error of CAL-H, PD and CAL-V, respectively, the standard deviation of single measurements were calculated. The CAL-H measurements were repeated intrasurgically and compared with presurgical assessments of furcation measurements. The overall standard deviation of single measurements was 0.759 mm. For Class 0, I, and II furcations, the standard deviations were 0.879 mm, 0.664 mm, 0.682 mm, respectively. The standard deviation of PD single measurements and CAL-V single measurements varied from 0.393 mm to 0.993 mm (PD) and from 0.555 mm to 1.161 mm (CAL-V), respectively. The agreement of replicate measurements of furcation degrees was moderate for furcation locations which showed a CAL-H < or = 3 mm and a CAL-H > 3 mm, respectively (weighted kappa-coefficients 0.500 and 0.691). At sites with furcation involvement Class O and II there was no statistically significant difference between presurgical and intrasurgical measurements. At sites with Class I furcations there was a statistically significant mean difference of 0.255 mm between presurgically and intrasurgically assessed CAL-H. There was no statistically significant difference between furcation classes as assessed presurgically and intrasurgically (chi 2 between 1.9 and 4.4).     

In vitro permeability of furcation dentin in permanent teeth

Extracted unerupted permanent third molars with the occlusal half of the crown and apical half of the roots removed were cemented to Plexiglas blocks. Using a positive pressure system in which the movement of fluid across the dental tubules could be measured, the permeability of furcation dentin was measured before and after alteration of the furcation thickness. Subsequently, measurements of reduction in thickness of cementum and dentin were performed. Furcation dentin permeability was found to increase as the cementum and dentin thickness was reduced and the smear layer removed. The permeability values obtained for the furcation dentin were similar to those found in radicular dentin in general, indicating that root dentin has a low permeability and that it has good barrier properties. The data would suggest that any bone resorption seen under the furcation region of permanent molars is more likely to be due to the presence of accessory canals than due to permeation directly through furcation hard tissues.     

Gingival recession and exposure of barrier membrane: effect on guided tissue regeneration of Class II furcation defects

The purpose of the present study was to evaluate the effect of barrier membrane exposure on the success of guided tissue regeneration in Class II furcation defects. Twenty-six subjects with mandibular Class II furcation defects received initial periodontal therapy followed by guided tissue regeneration surgery. The membrane was placed and the flaps were repositioned so that the membrane was totally submerged. Membranes were removed 4 to 6 weeks later, at which time the extent of their exposure was recorded. An overall improvement in all clinical parameters was observed for all subjects 1 year after surgery. Half of the patients had experienced no membrane exposure, while the other 13 subjects had experienced mild to pronounced exposure; both groups showed similar improvement in all clinical and surgical parameters. In light of the comparable results obtained in exposed sites, and the anatomic difficulties sometimes encountered in covering a membrane completely, in some of these cases the membrane may be left only partially submerged. This approach will allow for tighter occlusal "seal" of the tooth-membrane interface and preservation of the keratinized gingiva.