Migration of formaldehyde and acetaldehyde into mineral water in polyethylene terephthalate (PET) bottles

The levels of formaldehyde (FA) and acetaldehyde (AA) in polyethylene terephthalate (PET) bottles and in commercial mineral water are reported. All the water samples bottled in Japan contained detectable levels of FA (10.1-27.9 μg l^-1) and AA (44.3-107.8 μg l^-1). Of 11 European bottled water samples, eight did not contain either FA or AA, while the remaining three had detectable levels of FA (7.4-13.7 μg l^-1) and AA (35.9-46.9 μg l^-1). In three North American bottled water samples, two contained FA (13.6 and 19.5 μg l^-1) and AA (41.4 and 44.8 μg l^-1), and one did not. Regardless of the region of origin, all the sterilized water samples contained FA and AA, whilst in contrast, none of the unsterilized water without carbonate contained FA or AA. Of the carbonated water samples, three contained FA and AA, and one did not. When fortified with FA and AA, the commercial water sample without otherwise detectable FA and AA was able to reduce levels, although the commercial water sample containing FA and AA could not. The presence of bacteria in the commercial water samples was investigated using an ATP-based bioluminescent assay and heterotrophic plate count method. The commercial water without FA and AA contained heterotrophic bacteria, whilst the commercial water with FA and AA did not contain detectable bacteria. It is suggested that in this case both FA and AA migrated from PET materials, but were subsequently decomposed by the heterotrophic bacteria in the unsterilized water.     

A sulfadimidine model to evaluate pharmacokinetics and residues at various concentrations in laying hen

Low level intake of drugs from the ingestion of contaminated feed may lead to residue problems in food animals. Sulfadimidine (SDD) was used as a model to determine the residue risk at various doses in laying hens. The drug was administered as a single intravenous injection (100 mg kg^-1 body weight, BW), as a single oral dose (100, 30, 10, 3, 1 mg kg^-1 BW) and via medicated feed for 7 consecutive days (30, 10, 3 mg kg^-1 BW). Drug levels were determined with HPLC-UV for plasma, yolk and albumen. Pharmacokinetic values, which were calculated using a first-order one-compartment model, residue levels and transfer rates into the eggs were found to be dose-dependent. Even low doses of 3 and 1 mg kg^-1 BW resulted in measurable residues in yolk and albumen 1 day after a single oral administration. After ingestion of medicated feed at 3 mg kg^-1 BW, mean drug levels at 0.14 ± 0.01 µg g^-1 were found in albumen and at 0.09 ± 0.01 µg ml^-1 in plasma. Generally, the residue levels in albumen and plasma were higher than in yolk. These findings demonstrate a residue risk for the consumer even after low level intake of drugs.     

Cadmium and mercury in cephalopod molluscs: Estimated weekly intake

Cadmium and mercury concentrations were measured in the flesh and hepatopancreas of different species of cephalopod molluscs (European squid, common octopus, curled octopus, horned octopus, pink cuttlefish, common cuttlefish) in order to establish whether the concentrations exceeded the maximum levels fixed by the European Commission. In hepatopancreas, the levels of cadmium were substantially higher than those in flesh (flesh 0.11-0.87 µg g^-1 wet weight, hepatopancreas 2.16-9.39 µg g^-1 wet weight), whilst the levels of mercury (flesh 0.13-0.55 µg g^-1 wet weight, hepatopancreas 0.23-0.79 µg g^-1) were approximately double those in flesh. Concentrations exceeding the maximum permitted limit of cadmium were found in 39.8 and 41.0% of common octopus and pink cuttlefish flesh, respectively. For mercury, concentrations above the limit were found only in octopuses, and precisely in 36.8, 50.0 and 20.0% of flesh samples of common, curled and horned octopus, respectively. In the hepatopancreas, concentrations of cadmium and mercury were above the proposed limits in all the samples examined. The estimated weekly intake of between 0.09 and 0.49 µg kg^-1 body weight for cadmium and between 0.05 and 0.24 µg kg^-1 body weight for mercury made only a small contribution to the provisional tolerable weekly intake (cadmium 1.3-7.0%, mercury 1.0-4.8%) set by the WHO.     

Justifying the need to prescribe limits for toxic metal contaminants in food-grade silver foils

The use of silver foils in various food preparations is a common practice in Middle Eastern and South East Asian countries. The FAO/WHO Joint Expert Committee on Food Additives (JECFA) has included silver in the list of food additives, but specifications were not prepared. Indian food legislation has included food-grade silver foil and laid down a purity requirement of 99.9%. This leaves an unspecified margin of 0.1% or 1000 µg g^-1 for contaminants. Therefore, a study to investigate the levels of metallic contaminants in food-grade silver foil was undertaken. Of 178 foils analysed, 161 (90%) contained silver, whilst 10% were fraudulently made up of aluminium. In the case of silver foils, 46% of the samples adhered to the desired purity requirement of 99.9%, while 54% had a lower silver content. Copper was present in 86.3% of the silver foils, while chromium, nickel and lead contamination was found in over 54% of samples. Cadmium levels were detected in 28% of the silver foils and manganese was present in 6.8% of samples. In silver foils showing metal contaminants, average levels were found for nickel (487 µg g^-1), lead (301 µg g^-1), copper (324 µg g^-1), chromium (83 µg g^-1), cadmium (97 µg g^-1) and manganese (43 µg g^-1), which being appreciable justify the need to prescribe limits for some metals in food-grade silver foil as well as for silver powder used in confectioneries and medicinal preparations. The work reported here should encourage manufacturers to use high-purity raw materials and take suitable precautions to reduce unwarranted exposure of consumers to toxic metal contaminants.     

Determination of selected mycotoxins in mould cheeses with liquid chromatography coupled to tandem with mass spectrometry

A simple and feasible method is described for analysing nine mycotoxins in cheese matrix. The method involves liquid extraction followed by high performance liquid chromatographic separation and mass spectrometric detection of the analytes, and allows the determination of aflatoxins B1, B2, G1, G2 and M1, ochratoxin A, mycophenolic acid, penicillic acid and roquefortine C simultaneously. Average recoveries of the mycotoxins from spiked samples at concentration levels of 5-200 µg kg^-1 ranged from 96-143%. Within-day relative standard deviations at these concentration levels varied from 2.3-12.1%. The limit of quantification for aflatoxin M1 was 0.6 µg kg^-1 and for the other compounds 5 µg kg^-1. The method developed was applied for analysing these mycotoxins in blue and white mould cheeses purchased from Finnish supermarkets. Roquefortine C was detected in all of the blue mould cheese samples in concentrations of 0.8-12 mg kg^-1. One blue cheese contained also 0.3 mg kg^-1 mycophenolic acid. The other investigated mycotoxins were absent in the samples.     

Analysis of vinylidene chloride and 1-chlorobutane in foods packaged with polyvinylidene chloride casing films by headspace gas chromatography/mass spectrometry (GC/MS)

A headspace gas chromatography/mass spectrometry method was developed for the simultaneous determination of vinylidene chloride and 1-chlorobutane in foods packaged with polyvinylidene chloride casing films. The solid foodstuff was homogenized with an equal mass of distilled water. The homogenate was incubated for 1 h at 90°C in a sealed headspace vial, and the headspace gas was then analysed by gas chromatography/mass spectrometry in selected ion-monitoring mode using a bonded porous polymer-coated capillary column. The recovery rates of vinylidene chloride and 1-chlorobutane in foodstuffs were 94.5-103.9 and 85.8-120.3%, respectively. Among 13 samples tested, vinylidene chloride was detected at 0.001-0.020 µg g^-1 in 11 foodstuffs, and 1-chlorobutane was detected at 0.004-0.040 µg g^-1 in all 13 foodstuffs. Furthermore, vinylidene chloride was detected at 0.04 µg g^-1 in one casing film, and 1-chlorobutane was detected in all casing films. The results indicate that these compounds migrated from the casing films into the foodstuffs.     

Survey of total mercury in some edible fish and shellfish species collected in Canada in 2002

Total mercury was measured in the edible portions of 244 selected fish and shellfish purchased in Canada at the retail level. By species, average mercury concentrations ranged from 0.011 μg g^-1 for oysters to 1.82 μg g^-1 for swordfish. The predatory fish contained the highest concentrations of mercury: swordfish (mean 1.82 μg g^-1, range 0.40-3.85 μg g^-1), marlin (1.43, 0.34-3.19 μg g^-1), shark (1.26, 0.087-2.73 μg g^-1), and canned, fresh and frozen tuna (0.35, 0.020-2.12 μg g^-1). Levels of mercury in the fresh and frozen tuna contained a mean of 0.93 μg g^-1 (range 0.077-2.12 μg g^-1) and were substantially higher than in the canned tuna (0.15, 0.02-0.59 μg g^-1). In the canned tuna, mercury concentrations varied with subspecies, with the highest average concentrations being found in Albacore tuna (mean 0.26 μg g^-1, range 0.19-0.38 μg g^-1) and the lowest (0.047, 0.025-0.069 μg g^-1) in five samples for which the subspecies of tuna were not identified. Mean concentrations of mercury in swordfish and fresh and frozen tuna were up to three times higher than reported for the USA. Dietary intake estimations found that provided fresh and frozen tuna, marlin, swordfish or shark are consumed once a month or less, the dietary intakes of total mercury by women of child-bearing age, averaged over 1 month, would fall below the Joint FAO/WHO Expert Committee on Food Additives provisional tolerable weekly intake for total mercury. The current Canadian advisory to children and women of child-bearing age is to limit their consumption of fresh and frozen tuna, swordfish and shark to no more than one meal per month.     

Distribution and elimination of fumonisin analogues in weaned piglets after oral administration of Fusarium verticillioides fungal culture

The distribution and elimination of fumonisins after oral administration of 50 mg FB₁, 20 mg FB₂ and 5 mg FB₃ per animal day^-1 for 22 days was studied in weaned barrows. At the end of the trial, the lung, heart, liver, kidney, spleen, brain, serum, bile, muscle, fat, urine and faeces samples were collected and their content of fumonisins (FB₁, FB₂) determined by LC-MS. The highest FB₁ concentrations were found in the liver (99.4 ± 37.5 ng g^-1) and kidneys (30.6 ± 10.1 ng g^-1), whilst the highest average amount of FB₂ was in the liver (1.4 ± 2.3 ng g^-1) and fat (2.6 ng g^-1 ± 4.8) samples. Comparing the FB₁/FB₂ ratio in different organs (19/1), it was found that the ratio in the abdominal and subcutaneous fat samples (4/1) was markedly different from those in all other tissues, namely the relative proportion of FB₂ was higher in latter cases. Of the total quantity of FB₁, the 13% taken up during 5 days was excreted unchanged with the faeces and urine. On average, in the urine and faeces, FB₁ was detected in nine- and 14-fold quantities, as compared with FB₂.     

Migration of volatile degradation products into ozonated water from plastic packaging materials

Migration of volatile degradation products from poly(ethylene terephthalate) (PET) and high-density polyethylene (HDPE) bottles, polypropylene (PP) caps and ethyl vinyl acetate (EVA) liners into ozonated water was measured. Polymer strips were immersed in deionized and distilled water with ozone concentrations of 0.5, 2.5 and/or 5 mg kg^-1 inside 35-ml vials, which were clamp-sealed and stored at 40°C for 10 days. A purge-and-trap unit was developed to extract volatile products from the ozonated water in vials. The extractables were trapped in an adsorbent tube and analysed using a GC-MS coupled with an automated thermal desorber (ATD). Mass spectra were interpreted by comparison with a NIST mass spectral library, and an internal standard method was used to quantify the extractables of interest. Several volatile compounds found in ozonated water that had been in contact with PP, EVA and HDPE polymers included butanal, pentanal, hexanal, heptanal, octanal, nonanal, 2,2-dimethyl propanal, 3-hexanone, 2-hexanone and heptanone. These compounds could cause off-taste and off-odour with a low organoleptic threshold. In general, the concentrations of these volatile compounds increased with an increased exposure to ozone. The highest concentration found was 14.1 ± 0.6 μg kg^-1 for hexanal with a 5 mg kg^-1 ozone treatment of PP caps. Even at a treatment level of 5 mg kg^-1 ozone, which is greater than 10 times the current regulatory limits for bottled water, the extractables migrating from those polymers were within the levels permitted by the FDA. For the PET sample, no significant peaks were observed before or after ozonation. These results imply that PP caps containing EVA liners may be major sources of off-odour and taste in ozonated bottled water.     

Assessment of trichothecene chemotypes of Fusarium culmorum occurring in Europe

Fusarium trichothecenes are a group of fungal toxic metabolites whose synthesis requires the action of gene products from three different genetic loci. We evaluated, both chemically and by PCR assays, 55 isolates of Fusarium culmorum from eight European countries and different host plants for their ability to produce trichothecenes. Specific sequences in the Tri6-Tri5 intergenic region were associated with deoxynivalenol production. Sequences in the Tri3 gene were also associated with deoxynivalenol production and specific primer sets were selected from these sequences to identify 3-acetyl-deoxynivalenol or 15-acetyl-deoxynivalenol chemotypes. Specific sequences in the Tri5 and Tri7 genes were associated with the nivalenol chemotype but not with the deoxynivalenol chemotype. Two chemotypes were identified by chemical analysis and confirmed by PCR. Strains of the nivalenol chemotype produced nivalenol (up to 260 µg g^-1) and 4-acetyl-nivalenol (up to 60 µg g^-1), strains with the 3-acetyl-deoxynivalenol chemotype produced deoxynivalenol (up to 1700 µg g^-1) and 3-acetyl-deoxynivalenol (up to 600 µg g^-1). Three strains of F. culmorum from France, previously reported as 15-acetyl-deoxynivalenol producers, had the 3-acetyl-deoxynivalenol chemotype. The results are consistent with data from other European countries on the occurrence of the nivalenol and 3-acetyl-deoxynivalenol chemotypes and provide support for the hypothesis that European isolates of F. culmorum producing deoxynivalenol belong only to the 3-acetyl-deoxynivalenol chemotype. The production of trichothecenes from F. culmorum isolates from walnut (3-acetyl-deoxynivalenol chemotype) and leek (nivalenol chemotype) is reported for the first time.     

Production of Beta-Carotene from Synthetic Medium by Blakeslea trispora in Fed-batch Culture

The production of β-carotene from a synthetic medium by Blakeslea trispora in fed-batch culture was investigated. A maximum β-carotene concentration of 85.0 mg L^-1 with productivity of 0.16 mg L^-1 h^-1 and specific β-carotene production rate of 0.01 mg g^-1 h^-1 was obtained by feeding the cells constantly with olive oil, cottonseed oil, soybean oil, antioxidant, and low concentration of growth factors at feeding rate of 4.2 mL h^-1 from the beginning of the fermentation. In this case, the fed-batch culture supported high values of biomass dry weight (11.0 g L^-1) and sugar utilization (0.976 g g^-1). The morphology of the fungus was studied during growth in fed-batch fermentation system using an image analysis system. Zygospores are the morphological forms, which are responsible for the production of the pigment. The highest percentage of zygospores (11.44%) was correlated with the highest percentage of intracellular β-carotene (0.72%) in the total biomass dry weight. Moreover, high percentages of vacuolated hyphae, evacuated cells, and degenerated hyphae of the microorganism were observed. This was due to the formation of high amount of H₂O₂ by exposure of the microorganism to high dissolved oxygen concentration.     

Content of mercury and cadmium in fish (Thunnus alalunga) and cephalopods (Eledone moschata) from the south-eastern Mediterranean Sea

Mercury and cadmium concentrations were measured in the flesh and liver (or hepatopancreas) of albacore (Thunnus alalunga) and horned octopus (Eledone moschata) to establish whether the concentrations exceeded the maximum levels fixed by the European Commission. In both species, mercury and cadmium mean concentrations were higher in liver (albacore: mercury = 2.41 μg g^-1 wet wt, cadmium = 9.22 μg g^-1 wet wt; horned octopus: mercury = 0.76 μg g^-1 wet wt, cadmium = 6.72 μg g^-1 wet wt) than in flesh (albacore: mercury = 1.56 μg g^-1 wet wt, cadmium = 0.05 μg g^-1 wet wt; horned octopus: mercury = 0.36 μg g^-1 wet wt, cadmium = 0.33 μg g^-1). Mercury concentrations exceeding the prescribed legal limit of 1 μg g^-1 wet wt were found in almost all albacore samples (flesh: 71.4%; liver: 85.7%). For horned octopus, concentrations above 0.5 μg g^-1 wet wt were observed solely in hepatopancreas, while in flesh, the concentrations were below this limit in all the samples examined. Of the flesh samples of albacore, 42.8% exceeded the proposed tolerance for cadmium for human consumption, whilst for horned octopus, the established limit was not exceeded in any sample.     

Hair mercury levels in relation to fish consumption in a community of the Moroccan Mediterranean coast

Coastal populations with high seafood consumption in the Mediterranean have a significant exposure to dietary methylmercury, and areas where environmental mercury pollution is an issue due to industrial activities are of special concern. The study was undertaken with the aim of assessing methylmercury exposure through fish consumption in a community of north Morocco and characterizing the relevant health risk. Concentrations of total mercury were determined in human hair, a biomarker of methylmercury exposure, and in locally consumed fish by cold vapour atomic absorption spectrophotometry. Based on consumption frequencies reported by the 108 subjects included in the study the weekly intake of methylmercury was estimated and biomarker data were evaluated in relation to the estimated intake and the sociodemographic characteristics of the population. Multiple regression analysis was employed for the interpretation of hair mercury data in relation to fish consumption frequency, gender and the age of individuals. Mercury concentrations in hair ranged from 0.22 to 9.56 µg g^-1 (geometric mean = 1.79 µg g^-1) and were closely related to fish intake. Fisherman and their families consumed fish three to five times per week and were the most exposed population subgroup. A high proportion of women of child-bearing age (50%) had relatively high levels of mercury in their hair (3.08-7.88 µg g^-1).     

Migration of aniline from polyamide cooking utensils into food simulants

Migration of aniline from polyamide cooking utensils was investigated. Aniline was found to originate from the application of black colorant in the polyamide 66 raw material. Analysis of polyamide raw material revealed an aniline concentration of 121 ± 13 mg kg^-1. The aniline concentration in a cooking utensil (turner) manufactured with 70% polyamide raw material was 82 ± 6 mg kg^-1. When testing migration from black coloured samples of turner, whisk and cooking spoon into water simulant at 100°C for 30 min, the migration levels at the third exposure were 39 ± 1, 11 ± 4 and 37 ± 4 μg dm^-2, respectively. Hence, these articles were not compliant with respect to the area-based limit for primary aromatic amines (3.33 μg dm^-2) set by European Union Directive 2002/72/EC. Repeated testing of a cooking utensil (turner) showed that approximately 100 h use at 100°C was required to reach legal (non-detectable) levels of aromatic amine migration.     

Determination of triazamate in apples, peas and Brussels sprouts using high-performance liquid chromatography with tandem mass spectrometry

A rapid method was developed to allow the analysis of triazamate and the hydrolysis product triazamate acid in apples, peas and Brussels sprouts. The procedure was based on acidified methanol extraction with quantification by liquid chromatography coupled with tandem mass spectrometry detection. The detection limit, based on the lowest calibration level, was 0.005 mg kg^-1. The method was validated at 0.05 and 0.01 mg kg^-1, and was used for screening of triazamate acid in the surveillance of apples as part of the UK pesticide monitoring programme. Calibrations were linear over the range 0.004-0.080 µg ml^-1 (equivalent to 0.005-0.11 mg kg^-1), with a minimum correlation coefficient of 0.95. The detection response showed some matrix-dependent variation. Mean recoveries were in the range 70-108% with associated per cent coefficient of variations of less than 20%.     

Comparison of various assays used for detection of beta-lactam antibiotics in poultry meat

In this study, microbiological tests for the detection of beta-lactam antibiotics in meat and meat products were evaluated. The traditional FPT (four plate test, containing Bacillus subtilis and Kocuria rhizophila), BsDA (Bacillus stearothermophilus disc assay) and a newly developed microbiological test, Premi®Test (containing Bacillus stearothermophilus) were included in the study. The limit of detection (LOD) of the Premi®Test was compared with the LOD of the traditional methods. The detection limits of the tests were determined by using beta-lactam antibiotic standards dissolved in meat juice, as well as meat tissue obtained from laying hens after experimental administration of amoxicillin. Positive samples, based on inhibition of growth of the organism in the test, were confirmed by high performance liquid chromatography (HPLC). Growth inhibition in the traditional tests is visible as a clear zone on the plate, whereas for Premi®Test, this is based on the absence of a colour change of the test. The LODs of antibiotics tested were as follows: Penicillin G (PENG) 5 µg kg^-1, amoxicillin (AMOX) 10 µg kg^-1, ampicillin (AMP) 25 µg kg^-1, oxacillin (OXA) 30 µg kg^-1, and cloxacillin (CLOX) 30 µg kg^-1 on the plate with Bacillus stearothermophilus. Beta-lactam antibiotics can be detected also on one plate seeded with Kocuria rhizophila, although the LODs are higher: PENG 10 µg kg^-1, AMOX 25 µg kg^-1, AMP 30 µg kg^-1, OXA 50 µg kg^-1, and CLOX 50 µg kg^-1. Premi®Test was performed according to the Standard Operating Procedure intended for detection of beta-lactam antibiotics in poultry tissues with following LODs: PENG 4 µg kg^-1, AMOX 5 µg kg^-1, AMP 5 µg kg^-1, OXA 40 µg kg^-1, CLOX 50 µg kg^-1. All tests are able to detect beta-lactam antibiotics such as penicillin G, ampicillin, amoxicillin, oxacillin and cloxacillin below the maximum residue level (MRL). However, the detection limits of the Premi®Test for PENG, AMOX and AMP were below the limits of BsDA and the plate containing Kocuria rhizophila.     

Five-year survey of ochratoxin A in processed sultanas from Turkey

The results of surveillance for ochratoxin A (OTA) in 1885 samples of sultanas taken during five crop years between 1999 and 2003 are reported. The analytical method was based on extraction with methanol + sodium bicarbonate and clean-up by immunoaffinity column chromatography followed by high-performance liquid chromatography with fluorescence detection. The limit of detection for OTA was 0.3 µg kg^-1. The results show that 9.3% of the samples contained no detectable levels of OTA, whereas 0.6% had concentrations exceeding 10 µg kg^-1; the remaining 90.3% had levels within the range 0.3-10 µg kg^-1. The overall mean OTA concentration in the total number of 1885 samples taken was 1.36 ± 2.91 µg kg^-1; the overall median was calculated as 0.90 µg kg^-1.     

Aflatoxin and ochratoxin A content of spices in Hungary

In October and November 2004, 91 spice samples (70 ground red pepper, six black pepper, five white pepper, five spice mix and five chilli samples), the majority of which originated from commercial outlets, were analysed for aflatoxins B₁, B₂, G₁ and G₂ (AFB1, AFB2, AFG1, AFG2) and ochratoxin A (OTA) content by high-performance liquid chromatography (HPLC) after immunoaffinity column clean-up. Eighteen of the 70 ground red pepper samples contained AFB1, seven of them in a concentration exceeding the 'maximum level' of 5 µg kg^-1 (range 6.1-15.7 µg kg^-1). Of the other spices assayed, the AFB1 contamination of one chilli sample exceeded 5 µg kg^-1 (8.1 µg kg^-1). Thirty-two of the 70 ground red pepper samples contained OTA, eight of them in a concentration exceeding the 10 µg kg^-1 'maximum level' (range 10.6-66.2 µg kg^-1). One chilli sample was contaminated with OTA at 2.1 µg kg^-1. The AFB1 and OTA contamination of ground red pepper exceeding the 'maximum level' (5 and 10 µg kg^-1, respectively) was obviously the consequence of mixing imported ground red pepper batches heavily contaminated with AFB1 and OTA with red pepper produced in Hungary. This case calls attention to the importance of consistently screening imported batches of ground red pepper for aflatoxin and ochratoxin A content and strictly prohibiting the use of batches containing mycotoxin concentrations exceeding the maximum permitted level.     

Lead and cadmium in meat and meat products consumed by the population in Tenerife Island, Spain

The aim of this study was to determine the levels of lead and cadmium in chicken, pork, beef, lamb and turkey samples (both meat and meat products), collected in the island of Tenerife (Spain). Lead and cadmium were measured by graphite furnace atomic absorption spectrometry (GFAAS). Mean concentrations of lead and cadmium were 6.94 and 1.68 µg kg^-1 in chicken meat, 5.00 and 5.49 µg kg^-1 in pork meat, 1.91 and 1.90 µg kg^-1 in beef meat and 1.35 and 1.22 µg kg^-1 in lamb meat samples, respectively. Lead was below the detection limit in turkey samples and mean cadmium concentration was 5.49 µg kg^-1. Mean concentrations of lead and cadmium in chicken meat product samples were 3.16 and 4.15 µg kg^-1, 4.89 and 6.50 µg kg^-1 in pork meat product, 6.72 and 4.76 µg kg^-1 in beef meat product and 9.12 and 5.98 µg kg^-1 in turkey meat product samples, respectively. The percentage contribution of the two considered metals to provisional tolerable weekly intake (PTWI) was calculated for meat and meat products. Statistically significant differences were found for lead content in meats between the chicken and pork groups and the turkey and beef groups, whereas for cadmium concentrations in meats, significant differences were observed between the turkey and chicken, beef and lamb groups. In meat products, no clear differences were observed for lead and cadmium between the various groups.     

Occurrence of tetrodotoxin and paralytic shellfish poisons in a gastropod implicated in food poisoning in southern Taiwan

The toxicity of the gastropod Nassarius papillosus implicated in a food paralytic poisoning incident in Liuchiu Island, Taiwan, in October 2005 is reported. The symptoms of a victim (67 years old) were featured by general paresthesia, paralysis of phalanges and extremities, paralysis, coma, and aphasia. The remaining specimens of shell were assayed for toxicity. The range of specimen toxicity was found to be 63-474 mouse units (MU) per specimen for N. papillosus by a tetrodotoxin (TTX) bioassay. The mean (SD) toxicity of the digestive gland and other portions were 296 ± 120 and 382 ± 156 MU in N. papillosus. The toxin was partially purified from the acidic methanol extract of the gastropod by using a C18 solid-phase extraction column. The eluate was then filtered through a 3000 MW cut-off ultrafree microcentrifuge filter. It was shown that the toxin purified from gastropods analysed by high-performance liquid chromatography and liquid chromatography/mass spectrometry contained TTX 42-60 µg g^-1 (about 90%), whereas along with minor paralytic shellfish poisons (PSP) it was 3-6 µg g^-1 (about 10%).