基于VB MSComm控件在PC机与单片机串口通信中的应用

在开发串行通信程序的过程中,利用微软的MSComm通信控件相对较简单,该控件具有丰富的与串行通信密切相关的属性及事件,提供了对串口的各种操作.介绍了在Visual Basic开发环境下,利用VB自带的MSComm控件设计单片机和上位机通信程序.     

基于VC的串口通信的实现

介绍了采用VisualC 6.0中的MSComm控件来实现串口通信的基本原理,设计实现了MSComm控件串口编程。     

利用MSComm控件实现可寻址广播系统的串行通信

介绍了 MSComm控件的特性和使用方法 ,讨论了在 Delphi环境下利用 MSComm控件实现计算机和终端控制器 /主控机之间的串口通信 ,详细讨论了可寻址广播系统中串口通信程序的实现 ,该控件在可寻址广播系统的设计中取得了良好的效果。     

用MSComm控件实现通用串行通信测试程序

提出在串行通信接口的开发过程中利用通用串行通信测试程序进行调试的方法。给出了用MSComm控件实现的通用串行通信测试程序的主要代码，并探讨在Visual C 通信编程中MSComm控件的使用方法和技巧。     

综合扫雷车模拟训练系统的设计与研究

以“综合扫雷车模拟训练系统”为例,介绍了利用Visual Basic的MSComm通信控件和Media Player媒体播放控件及单片机系统来实现某些装备的模拟操作训练,重点介绍了利用Visual Basic的MSComm通信控件开发微机与单片机的通信。     

串行通信在实时数据采集中的应用

本文讨论了VB 6.0 MSComm控件在数据采集中的应用。利用VB6.0 ActiveX中的MSComm通信控件,实现了Windows下单台PC机与多台计量仪表的串行通信,达到了以较低的硬件成本对多路数据自动采集、计算和分析的目的。     

Delphi下用MSComm控件实现的PC与多单片机的串口通讯

本文介绍了在Delphi环境下采用MSComm控件进行PC机与多单片机串口通讯的软硬件实现，着重对MSComm控件的安装、通信方式及其主要属性进行了描述。     

基于MSComm控件实现串行通信的方法

本文论述了利用MSComm控件实现串行通信的方法,并结合一个学生成绩查询系统比较全面地描述了该方法的具体实现过程。该系统利用串口控制纸币识别器的工作,用MSComm控件实现了简单、可靠的串行通信。     

基于MSComm控件的发动机运行监控系统串行通信研究

本文研究了MSComm控件在开发摩托车发动机监控系统数据采集模块中的数据通讯模式。利用VB6．0ActiveX中的MSComm通信控件,实现了Windows下单台PC机与主控单片机的串行通信,实现了电控汽油机运行参数的可视化,为电控汽油机控制参数的优化匹配提供了依据。     

基于VB串行通信的毒气浓度实时监测

本文介绍了在Visual Basic环境下利用MSComm通信控件开发串行数据通信的方法,通过MSComm控件的事件驱动方式,实现对远程污染源排放的有毒气体浓度的实时自动监测,实际使用效果良好.     

利用MODIS EVI时间序列数据分析福建省植被变化(2000~2017年)

以全国森林覆盖率最高的福建省为研究对象,利用2000~2017年夏季的MODIS EVI植被指数数据和气象与非气象因子进行协同分析,以揭示近17年福建植被的时空变化及其影响因子。结果表明:研究期内福建的EVI均值整体上升,从2000年的0.454上升至2017年的0.505,17 a间上升了11.2%,表明福建省的植被整体处于变好的状态,且在中部和西南部的变化最明显。相关分析表明,在研究期内,气象因子(气温和降水)对EVI变化的影响不显著,植被的变好主要为非气象因子的作用。EVI的提高主要得益于2003年福建省建设生态省后森林覆盖率的提高,并和2012年开始的水土流失治理有明显关系,这说明人类活动的积极作用对福建植被的变好起到了关键的作用。     

INTRODUCTION TO THE SPECIAL ISSUE ON CASE-BASED REASONING IN THE HEALTH SCIENCES

There has been an explosion of interest in health sciences applications of case-based reasoning (CBR), not only in the traditional CBR in medicine domain, but also in bioinformatics, enabling home health-care technologies, CBR integration, and synergies between CBR and knowledge discovery. This special issue features the best papers from the third workshop on CBR in the health sciences, held at ICCBR-05 in Madrid. It is the third in a series of exciting workshops, the first two of which were held at ICCBR-03, in Trondheim, Norway, and at ECCBR-04, in Madrid, Spain. The nine high-quality papers introduced here represent the research and experience of twenty-two authors working in eight different countries on a wide range of problems and projects. These papers illustrate some of the major trends of current research in CBR in the health sciences, and represent overall an excellent sample of the most recent advances of CBR in the health sciences.     

网页制作与电子商务网站安全

网页制作是目前比较流行的一种行业,它已经渗透到社会的各个角落,而电子商务网站中网页制作技术应用的最多,该文主要从电子商务网站的安全隐患、网站安全现状、网站安全的措施与解决方案、电子商务发展等方面进行探讨,尤其对于网站安全的考虑,在编写网页代码时,应注意的一些防范方法的介绍,以促进人们对网页制作中的安全防范技术的了解。     

Analysis of finite-buffer discrete-time batch-service queue with batch-size-dependent service

Over the last two decades there has been considerable growth in digital communication systems which operate on a slotted system. In several applications, transmission of packets over the network takes place in batches of varying size, and transmission time depends upon the size of the batch. Performance modelling of these systems is usually done using discrete-time queues. In view of this, we consider a single-server queue with finite-buffer in a discrete-time domain where the packets are transmitted in batches (of varying size) according to minimum and maximum threshold limit, usually known as general batch service rule. The transmission time (in number of slots) of these batches depends on the number of packets within the batch under transmission, and is arbitrarily distributed. We obtain, in steady-state, distribution of the number of packets waiting in the queue and in service (those being transmitted in batches). In addition, we also obtain average number of packets waiting in queue, in the system, with the server, rejection probabilities, etc. Finally, computational experiences with a variety of numerical results have been discussed by introducing a cost model which gives optimum value of the lower threshold limit.     

Stability of nonlinear hybrid dynamical systems with time delay via sum of squares decomposition

Considering an infinite number of eigenvalues for time delay systems, it is difficult to determine their stability. We have developed a new approach for the stability test of time delay nonlinear hybrid systems. Construction of Lyapunov functions for hybrid systems is generally a difficult task, but once these functions are found, stability’s analysis of the system is straight-forward. In this paper both delay-independent and delay-dependent stability tests are proposed, based on the construction of appropriate Lyapunov-Krasovskii functionals. The methodology is based on the sum of squares decomposition of multivariate polynomials and the algorithmic construction is achieved through the use of semidefinite programming. The reduction techniques provide numerical solution of large-scale instances; otherwise they will be computationally infeasible to solve. The introduced method can be used for hybrid systems with linear or nonlinear vector fields. Finally simulation results show the correctness and validity of the designed method. Recommended by Editorial Board member Young Soo Suh under the direction of Editor Jae Weon Choi. The authors wish to express their thanks to Dr. A. Papachristodoulou and Dr. M. Peet for their helpful comments and suggestions. Mohammad Ali Badamchizadeh was born in Tabriz, Iran, in December 1975. He received the B.S. degree in Electrical Engineering from University of Tabriz in 1998 and the M.Sc. degree in Control Engineering from University of Tabriz in 2001. He received the Ph.D. degree in Control Engineering from University of Tabriz in 2007. He is now an Assistant Professor in the Faculty of Electrical and Computer Engineering at University of Tabriz. His research interests include Hybrid dynamical systems, Stability of systems, Time delay systems, Robot path planning. Sohrab Khanmohammadi received the B.S. degree in Industrial Engineering from Sharif University, Iran in 1977 and the M.Sc. degree in Automatic from University Paul Sabatie, France in 1980 and the Ph.D. degree in Automatic from National University, ENSAE, France in 1983. He is now a Professor of Electrical Engineering at University of Tabriz. His research interests are Fuzzy control, Artificial Intelligence applications in control and simulation on industrial systems and human behavior. Gasem Alizadeh was born in Tabriz, Iran in 1967. He received the B.S. degree in Electrical Engineering from Sharif University, Iran in 1990 and the M.Sc. degree from Khajeh Nasir Toosi University, Iran in 1993 and the Ph.D. degree in Electrical Engineering from Tarbiat Modarres University, Iran in 1998. From 1998, he is a Member of University of Tabriz in Iran. His research interests are robust and optimal control, guidance, navigation and adaptive control. Ali Aghagolzadeh was born in Babol, Iran. He received the B.S. degree in Electrical Engineering in 1985 from University of Tabriz, Tabriz, Iran, and the M.Sc. degree in Electrical Engineering in 1988 from the Illinois Institute of Technology, Chicago, IL. He also attended the School of Electrical Engineering at Purdue University in August 1998 where he was also employed as a part-time research assistant and received the Ph.D. degree in 1991. He is currently an Associate Professor of Electrical Engineering at University of Tabriz, Tabriz, Iran. His research interests include digital signal and image processing, image coding and communication, computer vision, and image analysis.     

在结构与随机扰动下的大系统的稳定性

在本文中,我们给出了在结构与随机扰动下的动态大系统的稳定性分析,建立了这类大系统的依概率吸引性,依概率一致有界性,依概率大范围渐近稳定性,p吸引性,一致p有界性,和大范围渐近p稳定性的结论。这些结论的假设是由孤立子系统和与其联系的李亚普诺夫函数,受扰系统的结构和作用在子系统上的随机扰动表出的。     

产品质量设计在ERP系统中的开发应用

ERP系统在济钢的成功运行,使其无论在日常运营、资源配置上,还是生产的管理、采购、销售中,发挥着越来越重要的作用。面向客户、面向订单的全过程的产品质量设计,及其在生产过程中的跟踪,提高客户满意度,实现精准、高效、和谐的生产模式上起着决定性作用。     

生物组织光声成像技术综述

光声成像是一种低功率、非电离的成像方式,既具有声学方法对深层组织成像分辨率高的优点,又具有光学方法在功能成像、分子成像方面具有高对比度的优势。本文回顾了近年来,光声成像技术在生物医学领域的研究进展,介绍了光声成像的基本成像原理。以此为基础,本文介绍了光声成像的两种主要成像方案：光声断层成像和光声显微镜,并且讨论了光声成像在获取生物组织化学成分信息和微结构信息方面的优越性;最后,本文对光声成像技术的优点和应用前景进行了总结。     

Himawari-8气溶胶产品的验证及应用

为准确分析中国地区气溶胶空间分布与时间变化特征规律，首先利用中国地区9个AERONET（Aerosol Robotic Network）地基站点观测资料对新一代静止气象卫星Himawari-8气溶胶光学厚度（Aerosol Optical Depth, AOD）产品数据进行一致性验证，并在此基础上选取2015年7月至2018年4月Himawari-8逐小时AOD数据分析了中国地区气溶胶光学厚度时空变化特征。结果表明：①Himawari-8 AOD与AERONET AOD之间相关性很高，9个站点的相关系数R在0.64 ~ 0.91之间，拟合曲线斜率k的范围为0.57 ~ 0.68。②Himawari AOD产品与AERONET AOD的相关性在中午时段较其他时段相对较低；北方地区Himawari-8 AOD冬季反演效果与夏季相比较差，南方地区则相反。③中国地区年平均AOD呈东高西低分布，春、夏两季AOD明显高于秋、冬两季，其中夏季最高，春季次之；地区间AOD月变化差异也较大；大部分地区AOD日变化呈现先下降后上升再下降的趋势，AOD最高值出现在午后14 ~ 16时，最低值出现在18时。研究结果为了解中国地区大气气溶胶的时空变化规律和全天时的大气污染监测方法提供新的参考。