Polymerization of lactams, 95 Preparation of polyesteramides by the anionic polymerization of ε-caprolactam in the presence of poly(ε-caprolactone)

Preparation of polyesteramides-poly[(ε-caprolactam)-co-(ε-caprolactone)]s by anionic polymerization of ε-caprolactam in the presence of poly(ε-caprolactone) at 150 °C was studied in this paper. ε-Caprolactam magnesium bromide was used as an initiator of polymerization and polymeric materials containing 5-25 wt% ε-caprolactone units were obtained. Thermal methods (DSC and DMA) were employed for characterization of poly[(ε-caprolactam)-co-(ε-caprolactone)]s and their mechanical properties were also evaluated. By introducing the activator with N-acyllactam structure, the polymerization rate increased and it was possible to carry out the polymerization at 110 °C. Mechanical properties of polyesteramides were influenced by both the content of ε-caprolactone units incorporated into copolymer and polymerization temperature. The mechanism of incorporation of poly(ε-caprolactone) is discussed. The results show that it is not possible to restrict exchange transacylation reactions, progressing in the course of polymerization, by kinetic tools.     

Polymer–metal complexes: Synthesis and characterization of poly(4-acetyl-3-hydroxyphenylacrylate) and its metal chelates

4-Acetyl-3-hydroxyphenylacrylate (AHAH) was synthesized and polymerized in 2-butanone using benzoyl peroxide as initiator. Poly(4-acetyl-3-hydroxyphenyl-acrylate) (PAHAH) was characterized by infrared and nuclear magnetic resonance techniques. The molecular weight of the polymer was determined by gel permeation chromatography. Cu(II) and Ni(II) chelates of PAHAH were synthesized. The diffuse reflectance spectra and magnetic moments of the polychelates show distorted planar and octahedral structures for poly[Ni(AHA)₂] and poly[Cu(AHA)₂(OH₂)₂] complexes, respectively. The thermal properties of the polychelates are also discussed. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 67: 177–182, 1998     

“Reservoir” and “barrier” effects of ABC block copolymer micelle in hydroxyapatite mineralization control

An amphiphilic triblock poly (ethylene glycol)-block-poly (acrylate acid)-block-poly (ε-caprolactone) (PEG-PAA-PCL) copolymer was synthesized by sequential anionic polymerization. By comparing with diblock copolymer poly (acrylic acid)-block-poly (ε-caprolactone) (PAA-PCL), the triblock copolymer (PEG-PAA-PCL) micelle has core-shell-corona structure, which possesses better dispersion, could be a good candidate as structure template for the controlled mineralization of hydroxyapatite (HA). The interactions between inorganic ions and polymers were studied by using Ca²⁺ ion selective electrode and zeta potential, which indicated the “reservoir” effect of micelles and the “barrier” effect of PEG segments during mineralization process. Ca²⁺ ions can penetrate through the corona and interact with PAA segments. When PO₄³⁻ ions were added, Ca²⁺ ions diffuse out, and react with PO₄³⁻ ions to form the new apatite layer. Thus the supersaturation could be well tuned by the triblock copolymer micelles, and the nucleation and crystal growth in nano scale could be controlled by appropriate usage of this template system.     

Block polymers from isocyanate-terminated intermediates. IV. Properties of cured butadiene–ε-caprolactam block polymers

Butadiene–ε-caprolactam block polymers containing a high proporation of 1,2 units in the butadiene-segments were synthesized and physical properties were measured on the cured copolymers. Flexural strength and impact resistance both increase regularly with increasing ε-caprolactam content in peroxide cured copolymers. This behavior is explained by the higher values of flexural modulus and impact resistance for poly(ε-caprolactam) compared with peroxide-cured polybutadiene resins. Copolymers reinforced with silica showed higher heat distortion temperatures but lower impact resistance than corresponding unfilled samples. Arrhenius plots of flexural properties at various test temperatures were linear. Both flexural modulus and strength decreased regularly with increasing test temperature. Flexural properties of filled copolymers were relatively unaffected by heat aging up to 204°C for several weeks, however, dramatic decreases in these properties were noted in a matter of days when heat aging was done at 260–316°C. These results are explained by the rapid degradation of poly(ε-caprolactam) above its melting point. Block polymers whose butadiene segments contained a high proportion of 1,4 units were also synthesized. These copolymers were elastomeric when cured with either sulfur or peroxide.     

Polychelates of poly[N-(4-carboxy-3-hydroxyphenyl)maleimide]

The reactions of the bidentate polymeric chelating ligand poly[N-(4-carboxy-3-hydroxyphenyl)maleimide] with Co(II), Ni(II), Cu(II), Zn(II) and UO₂(II) metal ions were investigated. Analytical, magnetic, spectral and thermal studies were used to characterize these polychelates. All these polychelates are stable, intensely coloured solids and insoluble in common organic solvents.     

Crystallization kinetics of poly-ε-caprolactone from poly-ε-caprolactone/poly(vinyl chloride) solutions

The polymer–polymer solution of poly(vinyl chloride) and poly-ε-caprolactone yields an excellent system for studying the crystallization kinetics of a crystallizable component from a polymer–polymer solution. Unlike previous studies of isotactic–atactic polystyrene solutions for which the glass transition temperature is invariant with composition, this system exhibits a marked dependence of T_g on the composition. The experimental data dE^?(modulus)/dt (psi^?/min) were obtained over a composition range of 40 to 70 wt-% poly-ε-caprolactone. With the appropriate modification of the spherulitic growth rate equation, the expression approximated a reasonable fit of the experimental data. This demonstrates a marked dependence of the crystallization rate on concentration. Secondary observations of this investigation show a slower crystallization rate for high molecular weight poly-ε-caprolactone and a slow secondary crystallization step. Both homopolymer poly-ε-caprolactone and poly-ε-caprolactone in the poly-ε-caprolactone/poly(vinyl chloride) solution show a slow (relative to the nucleation-controlled step) crystallization stage considered to involve a slow diffusion mechanism.     

Multiarm hyperbranched polyester‐b‐Poly(ε‐caprolactone):Plasticization effect and migration resistance for PVC

A series of multiarm structure hyperbranched polyester‐b‐poly(ε‐caprolactone) (HEPCLs) with different lengths of poly(ε‐caprolactone) (PCL) segments (s = 3, 6, 7, 8) were synthesized. Hyperbranched polyester (HE) was synthesized from glycidol and succinic anhydride and used as a macromolecular polymerization initiator for ε‐caprolactone. The HEPCLs were used as polyvinyl chloride (PVC) plasticizers and the mechanical properties, thermal properties, morphology, and migration stabilities of PVC films were explored. The plasticizing efficiency increased with the increase in PCL segments, and the plasticizing efficiency of HEPCL₈ exceeded that of dioctyl phthalate. Scanning electron microscopy and solid‐state ¹H NMR showed that the HEPCLs possess better compatibility with PVC than HE. Moreover, HEPCLs exhibited excellent migration stability even at very harsh condition, indicating that HEPCLs can be used as no‐migration PVC plasticizers in medical products, children's toys, and food packaging. J. VINYL ADDIT. TECHNOL., 26:35–42, 2020. © 2019 Society of Plastics Engineers     

Powdered poly(ethylene terephthalate)

The influence of the conditions of preparation on the properties of powdered poly(ethylene terephthalate) was followed from the point of view of its specific surface. The powdered poly(ethylene terephthalate) prepared by reprecipitation from the melt of 6-caprolactam has a porous and structured surface, and consequently, also a large specific surface in comparison with the powedered poly(ethylene terephthalate) prepared by mechanical milling. The specific surface value is influenced by the cooling rate of the initial homogeneous melt of poly(ethylene terephthalate)-6-caprolactam, by the concentration of poly(ethylene terephthalate) in this melt and by its molecular weight, by the water temperature at the extraction of 6-caprolactam from the tough mixed melt, by the drying temperature of the powdered poly(ethylene terephthalate), and by the content of residual 6-caprolactam in the powdered product. In the examined area, the specific surface value of the powdered poly(ethylene terephthalate) prepared by reprecipitation from the melt of 6-caprolactam ranged from 10 to 110 m²·g^?1.     

On the synthesis of poly(ε-caprolactam)—poly(butadiene-co-acrylonitrile) block copolymers for the reaction injection molding process

The liquid rubbers Hycar ATBN and HTBN were used in the preparation of poly(ε-caprolactam)—poly(butadiene-co-acrylonitrile) block copolymers intended for reaction injection molding by the anionic polymerization of ε-caprolactam. The conversion of Hycar end groups to polymerization growth centers and the conditions of polymerization influence the crystallization, morphology, and mechanical properties of the product through its molecular structure. The contribution of individual reactions to this molecular structure is discussed.     

Microwave‐assisted one‐pot copolymerization of cyclic monomers and ethyl diazoacetate

The present contribution describes an innovation in the copolymerization of cyclic monomers, ε‐caprolactam (ε‐CL) and 2,2‐dimethyltrimethylene carbonate (DTC), with ethyl diazoacetate (EDA). The characterizations of the obtained copolymers, poly(EA‐ran‐EDA‐ran‐ε‐CL) and poly(EA‐ran‐EDA‐ran‐DTC) (where EA refers to the ethyl acetate group from EDA after nitrogen release), were performed using ¹H NMR and ¹³C NMR spectroscopies and size exclusion chromatography. Under optimized conditions, the copolymer of ε‐CL with EDA possessing a number‐average molar mass (M_n) of 1300 g mol^?1 and dispersity of 2.12 as well as that of DTC with EDA with M_n of 8000 g mol^?1 and dispersity of 1.47 were obtained. The incorporation of the azo group in the obtained copolymers was determined from the results of elemental analysis (3.30–10.22% nitrogen) and Fourier transform infrared spectroscopy. Furthermore, the thermal properties of the obtained copolymers were examined using differential scanning calorimetry. X‐ray diffraction results showed that the synthesized copolymers were amorphous. © 2014 Society of Chemical Industry     

Synthesis and characterization of poly(1,3‐thiazol‐2‐yl‐carbomoyl) methyl methacrylate: Its metal complexes and antimicrobial activity studies

Poly(1,3‐thiazol‐2‐yl‐carbomoyl) methyl methacrylate [poly(TCMMA)] is prepared in dimethyl sulfoxide using 2,2′‐azobisisobutyronitrile as an initiator at 60°C. Poly(TCMMA) is characterized by IR and ¹H‐NMR spectroscopic techniques. Cadmium(II), copper(II), and nickel(II) chelates of poly(TCMMA) were synthesized. An elemental analysis of the polychelates suggests a metal/ligand ratio of 1:2. The polychelates are further characterized by IR and magnetic susceptibility measurements. The thermal properties of the polymer and metal chelates are also discussed. The molecular weights of the poly(TCMMA) are determined by the gel permeation chromatography technique. The antimicrobial activities of the polymer and metal chelates are tested against Staphylococcus aureus COWAN I (bacteria), Escherichia coli ATCC 25922 (bacteria), Listeria monocytogenes SCOTTA (bacteria), Bacillus subtilis LMG (bacteria), Enterobacter aeroginosa CCM 2531 (bacteria), Klebsiela pneumania FMCS (bacteria), Candida albicans CCM 314 (Mayo yeast), and Saccharamyces cerevisiae UGA 102 (Mayo yeast). © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3244–3251, 2003     

Synthesis,structure and behavior of new polycaprolactam copolymers based on poly (ethylene oxide)–poly (propylene oxide)–poly (ethylene oxide) macroactivators derived from Pluronic block copolymers

Novel series of poly (CL–co–Pluronic) polymers were successfully synthesized in situ by ring-opening polymerization (ROP) of ε-caprolactam (ε-CL). The copolymerization was activated by new type macroactivators (MAs) based on hydroxyl-terminated poly (ethylene oxide)-poly (propylene oxide)-poly (ethylene oxide) [PEO-PPO-PEO] triblock copolymers, known under the trade name Pluronic^®. Toluene-2,4-diisocyanate (TDI) was used to obtain the isocyanate-terminated Pluronic prepolymers. The corresponding MAs were synthesized in situ with an N-carbamoyllactam structure. As an initiator of the copolymerization processes was used sodium lactamate (NaCL). To confirm the influence over the copolymerization process, microstructure, composition and molecular weight of the polymeric products two new types MAs based on Pluronic (P123 and F68) have been varied from 2 to 10 wt.% (vs. the monomer ε-CL). The structure of the both Pluronic based macroactivators (MAs) and accordingly obtained two series poly (CL-co-Pluronic) polymers were confirmed by ¹H NMR and FT-IR analyses. Additionally, the structure, molecular weight, physicomechanical behavior, thermal stability and morphology of the new synthesized poly (CL–co–Pluronic) polymers have been investigated by Differential Scanning Calorimetry (DSC), Wide-Angle X-ray Diffraction (WAXD), Thermogravimetric Analysis (TGA) and Scanning Electron Microscopy (SEM) analysis.     

Controlled synthesis of crosslinked polyamide 6 using a bis-monomer derived from cyclized lysine

The controlled synthesis of polyamide 6 chemical networks by anionic ring-opening copolymerization of ε-caprolactam (CL) with synthesized bis-ε-caprolactam derived from α-amino-ε-caprolactam, i.e. N-functionalized α-amino-ε-caprolactam bis-monomers, using sodium ε-caprolactamate as an initiator and hexamethylene-1,6-dicarbamoylcaprolactam as di-functional fast activator was examined in bulk at 140 °C. An urea-based bis-monomer and CL were first shown to copolymerize with a decreasing polymerization rate due to side reactions. On the contrary, quantitative copolymerization of CL with various amounts of bis-N(2-oxo-3-azepanyl)-1,6-tetramethylenediamide, an amide-based bis-monomer, leads to fast kinetics similar to the homopolymerization of CL. Crosslinked PA6 with network exhibiting elastic or viscoelastic behaviors, depending on the amount of crosslinker, were observed and characterized by swelling in hexafluoroisopropanol, dynamic mechanical analysis and rheology measurements. Crystallinity and swelling were shown to decrease with the increasing content of the crosslinking agent.     

Composites Between Alumina and an Ester‐Ether‐Ester Bioresorbable Copolymer

Composites between alumina and the bioresorbable poly(ε‐caprolactone)‐block‐poly(oxyethylene)‐block‐poly(ε‐caprolactone) copolymer were obtained by reacting ε‐caprolactone with preformed poly(ethylene glycol), in the presence of ceramic alumina powder, at 185°C under vacuum. The mechanical properties, tested by compression and flexural strengths and Young's modulus, show that the copolymer interacts poorly with the alumina grains. Both scanning electron and atomic force microscopy show a scarce wettability between alumina and copolymer, as well as the aggregation of alumina micro‐particles into clusters of big size. Both mechanical and morphological tests seem to indicate a stronger interaction between the alumina micro‐particles than between the alumina surface and the reaction mixture during the polymerization, as well as a “compacting effect” by alumina on the forming copolymer. The FT‐IR spectra of the composites show both copolymer and alumina absorption bands. The FT‐IR analysis on the fractions of an extraction with CHCl₃ indicates the presence of traces of poly(ε‐caprolactone), stably linked to alumina. The polymerization of ε‐caprolactone with alumina alone in the same conditions gives poly(ε‐caprolactone), mainly free and in minor part linked to the alumina surface. Two polymerization mechanisms, simultaneously occurring, are proposed. The most relevant result of this work is the lack of chemical inertness of alumina towards ε‐caprolactone, which leads to reconsider also the use of alumina as a biochemically inert material.     

Polyethylene‐block‐poly(ε‐caprolactone) diblock copolymers: synthesis and compatibility

A strategy is introduced for the synthesis of polyethylene‐block‐poly(ε‐caprolactone) block copolymers by a combination of coordination polymerization and ring‐opening polymerization. First, end‐hydroxylated polyethylene (PE‐OH) was prepared with a one‐step process through ethylene/3‐buten‐1‐ol copolymerization catalyzed by a vanadium(III) complex bearing a bidentate [N,O] ligand ([PhN?C(CH₃)CHC(Ph)O]VCl₂(THF)₂). The PE‐OH was then used as macroinitiator for ring‐opening polymerization of ε‐caprolactone, leading to the desired nonpolar/polar diblock copolymers. The block structure was confirmed by spectral analysis using ¹H NMR, gel permeation chromatography and differential scanning calorimetry. The unusual topologies of the model copolymers will establish a fundamental understanding for structure–property correlations, e.g. compatibilization, of polymer blends and surface and interface modification of other polymers. © 2014 Society of Chemical Industry     

Thermal properties of poly(maleic anhydride‐alt‐acrylic acid) in the presence of certain metal chlorides

Polychelates were synthesized by the addition of aqueous solutions of copper(II), cadmium(II), and nickel(II) chlorides to aqueous solutions of poly(maleic anhydride‐alt‐acrylic acid) [poly(MA‐alt‐AA)] in different pH media. The thermal properties of poly(MA‐alt‐AA) and its metal complexes were investigated with thermogravimetry and differential scanning calorimetry (DSC) measurements. The polychelates showed higher thermal stability than poly(MA‐alt‐AA). The thermogravimetry of the polymer–metal complexes revealed variations of the thermal stability by complexation with metal ions. The relative thermal stabilities of the systems under investigation were as follows: poly(MA‐alt‐AA)–Cd(II) > poly(MA‐alt‐AA)–Cu(II) > poly(MA‐alt‐AA)–Ni(II) > poly(MA‐alt‐AA). The effects of pH on the complexation and gravimetric analysis of the polychelates were also studied. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3926–3930, 2006     

Synthesis,characterization, ion‐exchange,and antimicrobial study of poly[(2‐hydroxy‐4‐methoxybenzophenone) propylene] resin and its polychelates with lanthanides (III)

The polymeric ligand (resin) was prepared from 2‐hydroxy‐4‐methoxybenzophenone with 1,3‐propane diol in the presence of polyphosphoric acid as a catalyst on constant heating at 160°C for 13 h. The poly[(2‐hydroxy‐4‐methoxybenzophenone) propylene] (HMBP‐PD) form 1 : 2 metal/ligand polychelates (metal–polymer complexes) with La(III), Pr(III), Nd(III), Sm(III), Gd(III), Tb(III), and Dy(III). The polymeric ligand and its polychelates (metal–polymer complexes) were characterized on the basis of elemental analyses, electronic spectra, magnetic susceptibilities, IR‐spectroscopy, NMR, and thermogravimetric analyses. The molecular weight was determined using number average molecular weight (M_n) by a vapor pressure osmometry (VPO) method. Activation energy ( E ) of the resin was calculated from differential scanning calorimetry (DSC). All the polychelates are paramagnetic in nature except La(III). Ion‐exchange studies at different electrolyte concentrations, pH, and rate have been carried out for lanthanides(III) metal ions. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Poly[(2-Hydroxy-4-Methoxy Benzophenone) Butylene] Resin and its Polychelates with Lanthanides(III): Synthesis and Characterization

ABSTRACT

The resin (polymeric ligand) was prepared from 2-hydroxy-4-methoxy benzophenone with 1,4-butane diol in the presence of polyphosphoric acid as a catalyst at 160°C for 9 h. The poly[(2-hydroxy-4-methoxy benzophenone) butylene] L = H(HMBP-BD) form 1:2, ML₂, complexes with M = La(III), Pr(III), Nd(III), Sm(III), Gd(III), Tb(III), and Dy(III). The polymeric ligand and its polychelates were characterized by elemental analyses, electronic spectra, and magnetic susceptibilities, IR-spectroscopy, NMR, and thermogravimetric analyses. The number average molecular weight (M¯n) of the resin was determined by Vapour Pressure Osmometry (VPO). All the polychelates are paramagnetic in nature. The resins and their polychelates were screened for their antimicrobial activity against E. coli, B. substilis, S. aureus (bacteria), and S. cerevisiae (yeast). It was found that the polychelates show good antimicrobial activity compared to the free polymeric ligand.     

Activation of the hydrolytic polymerization of ε-caprolactam by ester functions: Straightforward route to aliphatic polyesteramides

The hydrolytic polymerization of ε-caprolactam (CLa) was carried out in bulk (in absence of solvent) at 250 °C in the presence of carboxylic esters and aqueous H₃PO₂. It turned out that by conducting the ring opening polymerization (ROP) of CLa in the presence of PEO–C(O)–O–C₅H₁₁, a selected model ester (PEO = poly(ethylene oxide)), a remarkable activating effect of the ester function on the hydrolytic polymerization of the lactam was observed yielding PEO–b–PCLa diblock copolymers. The comparison of the CLa monomer conversions obtained with or without the model ester activated by H₃PO₂, as determined by ¹H NMR spectroscopy, has enabled to propose a multi-step mechanism in which three major reactions occurred: (i) ester and lactam hydrolysis, (ii) aminolysis of the carboxylic ester by the resulting primary amine of the hydrolyzed/opened lactam ring and (iii) condensation reactions between carboxylic acids and both amine/hydroxyl functions. The overall result of this multi-step mechanism can be assimilated as an “insertion” of the opened lactam into the ester function. By conducting the hydrolytic polymerization of CLa in the presence of an aliphatic polyester chain, such as poly(ε-caprolactone) (PCLo), polyesteramides were recovered with high yields and random distributions of the CLa and CLo repetitive units as determined by ¹³C NMR.     

Novel poly(ε-caprolactone)s bearing amino groups: Synthesis,characterization and biotinylation

A novel functional ε-caprolactone monomer containing protected amino groups, γ-(carbamic acid benzyl ester)-ε-caprolactone (γCABεCL), was successfully synthesized. A series of copolymers [poly(CL-co-CABCL)] were prepared by ring-opening polymerization of ε-caprolactone (CL) and γCABεCL in bulk using tin (II)-2-ethylhexanoate [Sn(Oct)₂] as catalyst. The morphology of the copolymers changed from semi-crystalline to amorphous with increasing γCABεCL monomer content. They were further converted into deprotected copolymers [poly(CL-co-ACL)] with free amino groups by hydrogenolysis in the presence of Pd/C. After deprotection, the free amino groups on the copolymer were further modified with biotin. The monomer and the corresponding copolymers were characterized by ¹H NMR, ¹³C NMR, FT-IR, mass, GPC and DSC analysis. The obtained data have confirmed the desired monomer and copolymer structures.