Electronic sensors based on biomaterials can lead to novel green technologies that are low cost, renewable, and eco-friendly. Here we demonstrate bioelectronic ammonia sensors made from protein nanowires harvested from the microorganism Geobacter sulfurreducens. The nanowire sensor responds to a broad range of ammonia concentrations (10 to 106 ppb), which covers the range relevant for industrial, environmental, and biomedical applications. The sensor also demonstrates high selectivity to ammonia compared to moisture and other common gases found in human breath. These results provide a proof-of-concept demonstration for developing protein nanowire based gas sensors for applications in industry, agriculture, environmental monitoring, and healthcare.
Nanoparticles (NPs) which are innovation and research focus in drug delivery systems, still have some disadvantages limiting its application in clinical use, such as short circulation time, recognition and clearance by reticuloendothelial system (RES) and passive targeting in certain organs. However, the recent combination of natural components and nanotechnology has offered new solutions to address these problems. A novel biomimetic platform consisting of nanoparticle core and membrane shell, such as cell membrane, exosome or vesicle vastly improves properties of nanoparticles. These coated nanoparticles can replicate the unique functions of the membrane, such as prolonged blood circulation, active targeting capability and enhanced internalization. In this review, we focus on the newest development of biological-camouflaged nanoparticles and mainly introduce its application related to cancer therapy and toll-like receptor.
Oligo(p-phenyleneethynylene)s (OPEs) end-capped with (alkynyl)bis(diphosphine)ruthenium and thiol/thiolate groups stabilize ca. 2 nm diameter gold nanoparticles (AuNPs). The morphology, elemental composition and stability of the resultant organometallic OPE/AuNP hybrid materials have been defined using a combination of molecular- and nano-material chacterization techniques. The hybrids display long-term stability in solution (more than a month), good solubility in organic solvents, reversible ruthenium-centered oxidation, and transparency beyond 800 nm, and possess very strong nonlinear absorption activity at the first biological window, and unprecedented two-photon absorption activity in the second biological window (σ2 up to 38,000 GM at 1,050 nm).
Graphene-h-BN hybrid nanostructures are grown in one step on the Pt(111) surface by ultra-high vacuum chemical vapor deposition using a single precursor, the dimethylamino borane complex. By varying the deposition conditions, different nanostructures ranging from a fully continuous hybrid monolayer to well-separated Janus nanodots can be obtained. The growth starts with heterogeneous nucleation on morphological defects such as Pt step edges and proceeds by the addition of small clusters formed by the decomposition of the dimethylamino borane complex. Scanning tunneling microscopy measurements indicate that a sharp zigzag in-plane boundary is formed when graphene grows aligned with the Pt substrate and consequently with the h-BN layer as well. When graphene is rotated by 30°, the graphene armchair edges are seamlessly connected to h-BN zigzag edges. This is confirmed by a thorough density functional theory (DFT) study. Angle resolved photoemission spectroscopy (ARPES) data suggests that both h-BN and graphene present the typical electronic structure of self-standing non-interacting materials.
Atomic non-noble metal materials show the potential to substitute noble metals in catalysis. Herein, melamine formaldehyde resin is developed to synthesize atomic iron on mesoporous nitrogen-doped carbon. The triazine units with abundant nitrogen content and cavity can realize effectively anchoring of single metal atoms. The atomic iron with unique charge and coordination characteristics shows superior catalytic performance in dehydrogenation reaction. Various N-heterocycles compounds and amines can be efficiently dehydrogenated into the corresponding products at room temperature, which is the mildest of all reported reaction conditions even when noble metal catalysts are considered. Therefore, development of atomic non-noble metal catalysts with mesoporous structure may provide an effective way to realize the substitution for noble metals in heterogeneous catalysis.
Two-dimensional (2D) nanomaterials have attracted a great deal of attention since the discovery of graphene in 2004, due to their intriguing physicochemical properties and wide-ranging applications in catalysis, energy-related devices, electronics and optoelectronics. To maximize the potential of 2D nanomaterials for their technological applications, controlled assembly of 2D nanobulding blocks into integrated systems is critically needed. This mini review summarizes the reported strategies of 2D materials-based assembly into integrated functional nanostructures, from in-situ assembly method to post-synthesis assembly. The applications of 2D assembled integrated structures are also covered, especially in the areas of energy, electronics and sensing, and we conclude with discussion on the remaining challenges and potential directions in this emerging field.
The rapid development of solar cells based on lead halide perovskites (LHPs) has prompted very active research activities in other closely-related fields. Colloidal nanostructures of such materials display superior optoelectronic properties. Especially, one-dimensional (1D) LHPs nanowires show anisotropic optical properties when they are highly oriented. However, the ionic nature makes them very sensitive to external environment, limiting their large scale practical applications. Here, we introduce an amphiphilic block copolymer, polystyrene-block-poly(4-vinylpyridine) (PS-P4VP), to chemically modify the surface of colloidal CsPbBr3 nanowires. The resulting core-shell nanowires show enhanced photoluminescent emission and good colloidal stability against water. Taking advantage of the stability enhancement, we further applied a modified Langmuir-Blodgett technique to assemble monolayers of highly aligned nanowires, and studied their anisotropic optical properties.
Over the past decade, numerous studies have attempted to enhance the effectiveness of radiotherapy (external beam radiotherapy and internal radioisotope therapy) for cancer treatment. However, the low radiation absorption coefficient and radiation resistance of tumors remain major critical challenges for radiotherapy in the clinic. With the development of nanomedicine, nanomaterials in combination with radiotherapy offer the possibility to improve the efficiency of radiotherapy in tumors. Nanomaterials act not only as radiosensitizers to enhance radiation energy, but also as nanocarriers to deliver therapeutic units in combating radiation resistance. In this review, we discuss opportunities for a synergistic cancer therapy by combining radiotherapy based on nanomaterials designed for chemotherapy, photodynamic therapy, photothermal therapy, gas therapy, genetic therapy, and immunotherapy. We highlight how nanomaterials can be utilized to amplify antitumor radiation responses and describe cooperative enhancement interactions among these synergistic therapies. Moreover, the potential challenges and future prospects of radio-based nanomedicine to maximize their synergistic efficiency for cancer treatment are identified.
Realizing the reduction of N2 to NH3 at low temperature and pressure is always the unremitting pursuit of scientists and then electrochemical nitrogen reduction reaction offers an intriguing alternative. Here, we develop a feasible way, gamma irradiation, for constructing defective structure on the surface of WO3 nanosheets, which is clearly observed at the atomic scale by high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM). The abundant oxygen vacancies ensure WO3 nanosheets with a Faradaic efficiency of 23% at −0.3 V vs. RHE. Moreover, we start from the regulation of the surface state to suppress proton availability towards hydrogen evolution reaction (HER) on the active site and thus boost the selectivity of nitrogen reduction.
A diverse range of remarkable boron nitride (BN) nanostructures subsuming nano-horns, nano-rods, nano-platelets, and clusters of hollow nanospheres (nano-onions, arguably of greatest applied and fundamental interest) have been produced exclusively from crystalline BN precursor powder via lamp ablation. The procedure is safe, devoid of toxic reagents, simple, rapid and scalable—generating some genres of nanoparticles that had previously proved elusive. Product structure and composition were unambiguously assessed by high-resolution transmission electron microscopy, energy-dispersive X-ray spectroscopy and electron energy loss spectroscopy.
Small-sized bimetallic nanoparticles that possess numerous accessible metal sites and optimal geometric/electronic structures show great promise for advanced synergetic catalysis but remain synthetic challenge so far. Here, an universial synthetic method is developed for building a library of bimetallic nanoparticles on mesoporous sulfur-doped carbon supports, consisting of 24 combinations of 3 noble metals (that is, Pt, Rh, Ir) and 7 other metals, with average particle sizes ranging from 0.7 to 1.4 nm. The synthetic strategy is based on the strong metal-support interaction arising from the metal-sulfur bonding, which suppresses the metal aggregation during the H2-reduction at 700 °C and ensure the formation of small-sized and alloyed bimetallic nanoparticles. The enhanced catalytic properties of the ultrasmall bimetallic nanoparticles are demonstrated in the dehydrogenation of propane at high temperature and oxidative dehydrogenations of N-heterocycles.
Orientation-controlled growth of two-dimensional (2D) transition metal dichalcogenides (TMDCs) may enable many new electronic and optical applications. However, previous studies reporting aligned growth of WSe2 usually yielded very small domain sizes. Herein, we introduced gold vapor into the chemical vapor deposition (CVD) process as a catalyst to assist the growth of WSe2 and successfully achieved highly aligned monolayer WSe2 triangular flakes grown on c-plane sapphire with large domain sizes (130 µm) and fast growth rate (4.3 µm·s−1). When the aligned WSe2 domains merged together, a continuous monolayer WSe2 was formed with good uniformity. After transferring to Si/SiO2 substrates, field effect transistors were fabricated on the continuous monolayer WSe2, and an average mobility of 12 cm2·V−1·s−1 was achieved, demonstrating the good quality of the material. This report paves the way to study the effect of catalytic metal vapor in the CVD process of TMDCs and contributes a novel approach to realize the growth of aligned TMDC flakes.
Carbon-carbon (C-C) coupling reactions represent one of the most powerful tools for the synthesis of complex natural products, bioactive molecules developed as drugs and agrochemicals. In this work, a multifunctional nanoreactor for C-C coupling reaction was successfully fabricated via encapsulating the core-shell Cu@Ni nanocubes into ZIF-8 (Cu@Ni@ZIF-8). In this nanoreactor, Ni shell of the core-shell Cu@Ni nanocubes was the catalytical active center, and Cu core was in situ heating source for the catalyst by absorbing the visible light. Moreover, benefiting from the plasmonic resonance effect between Cu@Ni nanocubes encapsulated in ZIF-8, the absorption range of nanoreactor was widened and the utilization rate of visible light was enhanced. Most importantly, the microporous structure of ZIF-8 provided shape-selective of reactant. This composite was used for the highly shape-selective and stable photocatalysed C-C coupling reaction of boric acid under visible light irradiation. After five cycles, the nanoreactor still remained high catalytical activity. This Cu@Ni@ZIF-8 nanoreactor opens a way for photocatalytic C-C coupling reactions with shape-selectivity.
Porous graphitic carbon nanorings (PGCNs) are proposed by smart catalytic graphitization of nano-sized graphene quantum dots (GQDs). The as-prepared PGCNs show unique ring-like morphology with diameter around 10 nm, and demonstrate extraordinary mesoporous structure, controllable graphitization degree and highly defective nature. The mechanism from GQDs to PGCNs is proven to be a dissolution-precipitation process, undergoing the procedure of amorphous carbon, intermediate phase, graphitic carbon nanorings and graphitic carbon nanosheets. Further, the relationship between particles size of GQDs precursor and graphitization degree of PGCNs products is revealed. The unique microstructure implies PGCNs a broad prospect for energy storage application. When applied as negative electrode materials in dual-carbon lithium-ion capacitors, high energy density (77.6 Wh·kg−1) and super long lifespan (89.5% retention after 40,000 cycles at 5.0 A·g−1) are obtained. The energy density still maintains at 24.5 Wh·kg−1 even at the power density of 14.1 kW·kg−1, demonstrating excellent rate capability. The distinct microstructure of PGCNs together with the strategy for catalytic conversion from nanocarbon precursors to carbon nanorings opens a new window for carbon materials in electrochemical energy storage.
The development of high-efficiency peroxidase mimetics is highly desirable in view of high cost and low stability of natural enzymes. From the perspective of mimicking active site microenvironment at low cost, we herein report a novel histidine-functionalized graphene quantum dot (His-GQD)/hemin complex, which exhibits the highest catalytic rate for the peroxidase-based chromogenic reaction among the hemin-containing mimetics reported so far. Also, our peroxidase mimetic shows excellent tolerance to strongly acidic conditions and can function in a wide temperature range. Lineweaver-Burk plots and comprehensive electron paramagnetic resonance analysis reveal a ping-pong type catalytic mechanism for this mimetic. In addition, His-GQD/hemin demonstrates high efficiency and accuracy in detecting H2O2 and blood glucose. Our work provides an effective design of artificial enzymes for practical applications.
To develop highly efficient electrochemical catalysts for N2 fixation is important to sustainable ambient NH3 production through the N2 reduction reaction (NRR). Herein, we demonstrate the development of vanadium phosphide nanoparticle on V foil as a high-efficiency and stable catalyst for ambient NH3 production with excellent selectivity. The high Faradaic efficiency of 22% with a large NH3 yield of 8.35 × 10−11 mol·s−1·cm−2 was obtained at 0 V vs. the reversible hydrogen electrode in acid solution, superior to all previously studied V-based NRR catalysts. Density functional theory calculations are also utilized to have an insight into the catalytic mechanism.