贴体包装技术及应用

本文论述了贴体包装技术原理、应用及发展,特别是在食品真空贴体包装方面的应用。     

真空贴体包装对鲟鱼片冷藏过程中品质变化的影响

本研究旨在探究4 ℃冷藏过程中真空贴体包装鲟鱼片的品质变化规律。以普通真空包装、托盘包装作对比,测定了冷藏过程中鲟鱼片菌落总数、硫代巴比妥酸反应产物（thibarbituric acid reactive substances,TBARS）值、挥发性盐基氮（total volatile basic nitrogen,TVB-N）含量、生物胺含量、ATP及其关联物含量与K值等化学指标,pH值、感官得分、色泽、质构等物理指标,以及微生物菌落总数。结果表明：与普通真空包装（6 d）和托盘包装（3 d）相比,真空贴体包装可将鲟鱼片在4 ℃冷藏条件下的货架期延长至9 d,并可有效抑制鲟鱼片TBARS值、TVB-N含量、总生物胺含量、次黄嘌呤含量、K值、b*值等指标的上升和弹性、硬度、鲜味物质肌苷酸含量的下降速度。此外,真空贴体包装可增加产品美观性,提高消费者购买欲,因此具有广泛应用于水产品包装的前景。     

希悦尔发布专为亚洲设计的创新真空贴体包装系统

正本刊讯(记者王翠竹)9月10～12日,第十八届中国国际肉类工业展览会(CIMIE)在青岛举办,希悦尔公司于会上发布了专为生鲜红肉和海鲜市场设计的创新真空贴体包装系统——快尔卫? Darfresh? DM100真空贴体包装机。据了解,DM100是一款小巧紧凑的包装系统,单托盒配置,速度可高达每分钟10包,其自动弹出设置能大幅节省劳动力成本。可以说,该包装系统是一种"零废边"的托盒贴体包装方案,能节约高达40%的包装薄膜使用量,     

针织贴体内衣结构尺寸分析

针对目前针织贴体内衣结构设计中对面料弹性把握不充分而造成的成衣尺寸不合理问题,以棉氨纬平针织面料制作的女式针织套衫为研究对象,进行尺寸放缩试验,并以主观方法评价其舒适性,最后得出了针织弹性面料制作贴体内衣时的合理放缩量。     

包装方式和宰后不同时间包装对羊肉品质的影响

为探究包装方式和宰后不同时间包装对羊肉贮藏品质的影响,本研究对宰后1 h热分割羊肉和冷却成熟24 h后的分割羊肉分别进行热收缩包装、真空包装、贴体包装、50%（体积分数,下同）O2+50%CO2气调包装,测定其在（2±2）℃贮藏过程中pH值、色泽、贮藏损失率、蒸煮损失率、离心损失率、剪切力、挥发性气味的变化。结果表明：与宰后24 h包装相比,宰后1 h包装羊肉pH值在贮藏14 d时更高,但其贮藏期间色泽较好,色泽稳定性更高,贮藏损失率更低。从整体来看,3种真空处理（热收缩包装、真空包装、贴体包装）羊肉嫩度均优于气调包装羊肉,且宰后1 h包装时真空条件处理对羊肉嫩化效果最好,宰后24 h羊肉在贮藏前期气调包装对羊肉嫩化效果较好;而无论何时包装,热收缩包装和气调包装羊肉贮藏损失率均显著小于其他处理组（P<0.05）,在贮藏前期色泽及稳定性较好,但贮藏后期色泽稳定性下降明显,气调包装羊肉在14 d时已部分发绿,贮藏21 d时挥发性气味变化显著。综上,宰后1 h包装有利于提高羊肉贮藏期间色泽及持水力,改善真空处理羊肉嫩度,宰后24 h包装可提高50%O2+50%CO2气调包装羊肉贮藏前期...     

浅谈贴体包装技术

贴体包装是将产品放在能透气的,用纸板、塑料薄膜或薄片制成的衬底上,上面覆盖加热软化的塑料薄膜或薄片,通过衬底抽真空,使薄膜或薄片紧密地包紧产品,并将其四周封合在衬底上的包装方法.     

不同包装方式对冷鲜鹿肉品质的影响

用出水率、菌落总数、挥发性盐基氮及pH值为指标,研究真空热缩包装、气调包装、真空贴体包装三种不同包装方式对冷鲜鹿肉在(0±2)℃条件下品质的影响。实验结果显示,在相同的冷藏条件下,真空热缩包装的鹿肉品质最佳,保鲜效果最好,产品的保质期最长达(70 d),气调产品色泽最好但包装保质期最短(7 d)。     

中国上海国际包装科技展览会将于5月举办

中国包装技术协会、上海市包装技术协会、上海歌华展览有限公司,将于2002年5月11～14日在上海新国际博览中心举办2002中国上海国际包装科技展览会。展出内容包括:①包装机械食品、饮品、药品、化妆品包装机械;填充、灌装、封口、封箱、贴标机械;吸塑、贴体、收缩、真空、捆扎打     

放眼全球广布局,深耕行业拓市场——访莫迪维克(上海)贸易有限公司中国大陆、台湾、香港、蒙古国总经理李延思,莫迪维克(上海)贸易有限公司中国区销售总监周宾

正托盒包装、气调包装、真空包装、贴体包装……伴随着科学技术研发的深入,机械制造业在不断发展,食品包装技术也愈发新颖、实用、高效。相较于散装食品,经过包装的食品不仅卖相更佳,其安全性也更具保障。对于食品生产商来说,选择技术先进、质量过硬、加工有保障的包装设备无疑是提升自身产品质量、扩大品牌效益的关键所在;对包装设备生产商而言,着眼市场需求、引导消费升级、     

贴体包装机(JB/T 10798-2007)

<正>1范围本标准规定了贴体包装机(以下简称"包装机")的术语和定义、型号、型式和基本参数、技术要求、试验方法、检验规则及标志、包装、运输和贮存等要求。     

Reliable identification of grapevine rootstock varieties using RAPD PCR on woody samples

Since grapevine ( Vitis spp .) rootstock material is being traded increasingly as disbudded woody material a lack of distinctive morphological features on such material necessitates an alternative and reliable means of identification. Methods described here were developed for rapid and efficient extraction of DNA from woody samples rich in phenolic compounds and polysaccharides, and for subsequent identification of varieties by RAPD PCR. Using these methods, and with the application of only one selected RAPD primer, we were able to differentiate sixteen rootstock varieties, including the seven varieties most commonly used in Germany. Problems commonly encountered with reproducibility of RAPD patterns were avoided by choosing primers with a dinucleotide sequence and a high G/C content that allowed a rather high annealing temperature of 45°C. Methods described here should also be useful for other horticultural crops, especially those with woody tissues rich in phenolic compounds and polysaccharides.     

An internet compendium of analytical methods and spectroscopic information for monomers and additives used in food packaging plastics

An internet website (http://cpf.jrc.it/smt/) has been produced as a means of dissemination of methods of analysis and supporting spectroscopic information on monomers and additives used for food contact materials (principally packaging). The site which is aimed primarily at assisting food control laboratories in the European Union contains analytical information on monomers, starting substances and additives used in the manufacture of plastics materials. A searchable index is provided giving PM and CAS numbers for each of 255 substances. For each substance a data sheet gives regulatory information, chemical structures, physico-chemical information and background information on the use of the substance in particular plastics, and the food packaging applications. For monomers and starting substances (155 compounds) the infra-red and mass spectra are provided, and for additives (100 compounds); additionally proton NMR are available for about 50% of the entries. Where analytical methods have been developed for determining these substances as residual amounts in plastics or as trace amounts in food simulants these methods are also on the website. All information is provided in portable document file (PDF) format which means that high quality copies can be readily printed, using freely available Adobe Acrobat Reader software. The website will in future be maintained and up-dated by the European Commission's Joint Research Centre (JRC) as new substances are authorized for use by the European Commission (DG-ENTR formerly DGIII). Where analytical laboratories (food control or other) require reference substances these can be obtained free-ofcharge from a reference collection housed at the JRC and maintained in conjunction with this website compendium.     

Aroma characterization of various apricot varieties using headspace–solid phase microextraction combined with gas chromatography–mass spectrometry and gas chromatography–olfactometry

The characterization of the aromatic profile of several apricot cultivars with molecular tracers in order to obtain objective data concerning the aromatic quality of this fruit was undertaken using headspace–solid phase microextraction (HS–SPME). Six apricot cultivars were selected according to their organoleptic characteristics: Iranien, Orangered, Goldrich, Hargrand, Rouge du Roussillon and A4025. The aromatic intensity of these varieties measured by HS–SPME–Olfactometry were defined and classified according to the presence and the intensity of grassy, fruity and apricot like notes. In the six varieties, 23 common volatile compounds were identified by HS–SPME–GC–MS. Finally, 10 compounds, ethyl acetate, hexyl acetate, limonene, β-cyclocitral, γ-decalactone, 6-methyl-5-hepten-2-one, linalool, β-ionone, menthone and (E)-hexen-2-al were recognized by HS–SPME–GC–O as responsible of the aromatic notes involved in apricot aroma and considered as molecular tracers of apricot aromatic quality which could be utilized to discriminate apricot varieties.     

Tests of potential functional barriers for laminated multilayer food packages. Part I: Low molecular weight permeants

The advent of the functional barrier concept in food packaging has brought with it a requirement for fast tests of permeation through potential barrier materials. In such tests it would be convenient for both foodstuffs and materials below the functional barrier (sub-barrier materials) to be represented by standard simulants. By means of inverse gas chromatography, liquid paraffin spiked with appropriate permeants was considered as a potential simulant of sub-barrier materials based on polypropylene (PP) or similar polyolefins. Experiments were performed to characterize the kinetics of the permeation of low molecular weight model permeants (octene, toluene and isopropanol) from liquid paraffin, through a surrogate potential functional barrier (25 μm-thick oriented PP) into the food simulants olive oil and 3% (w/v) acetic acid. These permeation results were interpreted in terms of three permeation kinetic models regarding the solubility of a particular model permeant in the post-barrier medium (i.e. the food simulant). The results obtained justify the development and evaluation of liquid sub-barrier simulants that would allow flexible yet rigorous testing of new laminated multilayer packaging materials.     

Analysis of benzo[a]pyrene in spiked fatty foods by second derivative synchronous spectrofluorimetry after microwave-assisted treatment of samples

A simple, rapid and inexpensive method has been developed for the determination of benzo[a     

The development of reference materials for paralytic shellfish poisoning toxins in lyophilized mussel. II: Certification study

This paper describes the second part of a project undertaken to develop certified mussel reference materials for paralytic shellfish poisoning toxins. In the first part two interlaboratory studies were undertaken to investigate the performance of the analytical methodology for several PSP toxins, in particular saxitoxin and decarbamoyl-saxitoxin in lyophilized mussels, and to set criteria for the acceptance of results to be applied during the certification exercise. Fifteen laboratories participated in this certification study and were asked to measure saxitoxin and decarbamoyl-saxitoxin in rehydrated lyophilized mussel material and in a saxitoxin-enriched mussel material. The participants were allowed to use a method of their choice but with an extraction procedure to be strictly followed. The study included extra experiments to verify the detection limits for both saxitoxin and decarbamoyl-saxitoxin. Most participants (13 of 15) were able to meet all the criteria set for the certification study. Results for saxitoxin.2HCl yielded a certified mass fraction of <0.07 mg/kg in the rehydrated lyophilized mussels. Results obtained for decarbamoyl-saxitoxin.2HCl yielded a certified mass fraction of 1.59+/-0.20 mg/kg. The results for saxitoxin.2HCl in enriched blank mussel yielded a certified mass fraction of 0.48 +/- 0.06 mg/kg. These certified reference materials for paralytic shellfish poisoning toxins in lyophilized mussel material are the first available for laboratories to test their method for accuracy and performance.     

Announcing a new international peer-reviewed journal:Food Science and Human Wellness now accepting manuscript submission in English

<正>We are pleased to announce the launch of a new international peer-reviewed journal-Food Science and Human Wellness,ISSN 2213-4530,which is an open access journal,produced and hosted by Elsevier B.V.on behalf of Beijing Academy of Food Sciences.Food Science and Human Wellness is an international peer-reviewed English journal that provides a forum for the dissemination of the     

Chinese CTP Market

According to Printing and Printing Equipment Industries Association of China（PEIAC）＇s statistics to the plate manufucturer in China, in 2013, the actual offset plate production has reached 346 million square meters in China. Among them, the CTP production volume was 245 million square meters, up by 11% than that of last year; the total sales of the CTP plate was 239 million square meters, up by 13%.     

Preparatory Work of Print China 2015 is Going Smoothly

正Held at Guangdong Modern International Exhibition Center,Print China 2015 will cover 7exhibition halls,besides the original Hall No.3,4,5,6,7,the newly built F zone of Hall 3 will be used too.The total area will be140,000 square meters.Hall 3:Offset and large printing equipment,package printing equipment,post press