Study on effect of duration of the ultrasonication process on solvent‐free polyurethane/organoclay nanocomposite coatings: Structural characteristics and barrier performance analysis

In this study, effect of duration of ultrasonication process on structural characteristics and barrier properties of solvent‐free castor oil‐based polyurethane (PU)/organically modified montmorillonite (OMMT) nanocomposites was investigated. A series of PU/OMMT composites were synthesized by in situ polymerization technique through an ultrasonication‐assisted process at various processing durations. Effect of ultrasonication duration on de‐agglomeration of clay stacks in castor oil dispersions was evaluated by optical microscopy, sedimentation test, and viscosity measurement. Wide angle X‐ray diffraction and Fourier‐transform infrared spectroscopy were employed to investigate the effect of processing time on degree of delamination of clay platelets and interfacial strength between clay layers and PU matrix. Also, surface morphology of the nanocomposites was analyzed by atomic force microscopy. The results showed that by increasing the ultrasonication time up to 60 min, the size of clay agglomerates decreased and the interlayer spacing of clay platelets increased. To evaluate the effect of ultrasonication duration on transport properties of the PU/OMMT composites, diffusion coefficient and permeability were determined through water uptake test. Electrochemical impedance spectroscopy was carried out to analyze the barrier properties and to evaluate the corrosion performance of these composite coatings on carbon steel panels. It was found that by increasing sonication time, the barrier property of nanocomposites against diffusion of water molecules improved, which is due to further separation of clay platelets, enhancement of the traveling pathways for water molecules and improvement of interactions between the two components. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Study on the effect of ultrasonication time on transport properties of polyurethane/organoclay nanocomposite coatings

In this study, a series of polyurethane (PU)/organically modified montmorillonite (OMMT) clay nanocomposites were synthesized by in situ polymerization technique through an ultrasonication-assisted process at various processing times. Wide angle X-ray diffraction (WAXD) was employed to investigate the effect of processing time on degree of delamination of clay platelets. In order to evaluate the effect of ultrasonication time on transport properties of the PU/OMMT composites, diffusion coefficient and maximum water uptake were determined through a water permeation test. Electrochemical impedance spectroscopy (EIS) was carried out to analyze the barrier properties and to evaluate the corrosion performance of these composite coatings on carbon steel panels. It was found that by increasing sonication time, the barrier property of nanocomposites against diffusion of water molecules was improved. This is due to further separation of clay platelets and enhancement of the traveling pathways for water molecules.     

Improvement of polyurethane adhesion to glass using novolac primer

The adhesion of polyurethane (PU) coatings based on toluene diisocyanate, poly(propylene glycol) (PPG) 2000, polyethylene adipate (PEA) 2000 and castor oil (CO) was studied. The coatings were applied to glass slides with and without novolac primer (due to the high functionality of castor oil, the resultant PU coatings have limited shelf life). Our studies showed that satisfactory adhesion strengths were achievable for immediate bonding. Furthermore, our study also found that the adhesion of polyurethane to glass surfaces was increased by using a thin layer of novolac primer.     

蓖麻油改性的水性聚氨酯涂料的制备及其防蚀性能

以可再生的蓖麻油和环氧树脂改性水性聚氨酯,研究了涂膜的耐水性能等,改性后的水性聚氨酯吸水率下降仅为3%,耐水性好。对该树脂所制成的富锌防腐涂料进行了腐蚀电位和电化学阻抗谱(EIS)的测试分析,考察了富锌涂层在3%NaCl溶液中的电化学行为,结果表明耐水性的提高导致蓖麻油改性的水性聚氨酯富锌涂料耐蚀性的改进。     

Synthesis and characterization of poly(urethane‐benzoxazine)/clay hybrid nanocomposites

Poly(urethane‐benzoxazine)/clay hybrid nanocomposites (PU/Pa–OMMTs) were prepared from an in situ copolymerization of a polyurethane (PU) prepolymer and a monofunctional benzoxazine monomer, 3‐phenyl‐3,4‐dihydro‐2H‐1,3‐benzoxazine (Pa), in the presence of an organophilic montmorillonite (OMMT), by solvent method using DMAc. OMMT was made from cation‐exchange of Na‐montmorillonite (MMT) with dodecyl ammonium chloride. The formation of the exfoliated nanocomposite structures of PU/Pa‐OMMT was confirmed by XRD from the disappearance of the peak due to the basal diffraction of the layer‐structured clay found in both MMT and OMMT. DSC showed that, in the presence of OMMT, the curing temperature of PU/Pa lowered by ca. 60°C for the onset and ca. 20°C for the maximum. After curing at 190°C for 1 h, the exothermic peak on DSC disappeared. All the obtained films of PU/Pa–OMMT were deep yellow and transparent. As the content of OMMT increased, both the tensile modulus and strength of PU/Pa–OMMT films increased, while the elongation decreased. The characteristics of the PU/Pa–OMMT films changed from plastics to elastomers depending on OMMT content and PU/Pa ratio. PU/Pa–OMMT films also exhibited excellent resistance to the solvents such as tetrahydrofuran, N,N‐dimethylformamide and N‐methyl‐2‐pyrrolidinone. The thermal stability of PU/Pa were enhanced remarkably even with small amount of OMMT. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 4075–4083, 2003     

Self-healing and anticorrosive properties of Ce(III)/Ce(IV) in nanoclay–epoxy coatings

The self-healing and anticorrosion effects of cerium nitrate in epoxy–clay nanocomposite coatings systems were studied. Different amounts of cerium (III) were added to epoxy–montmorillonite clay composites and the nanocomposite coatings were prepared and applied on cold rolled steel panels. Ultrasonication was applied to disperse the nanoclay into the epoxy cerium nitrate composition. Electrochemical impedance spectroscopy (EIS) was used to study the self-healing and anticorrosion behaviors of the coatings. The structure of the dry coating and the protective mechanism of the pigments in the coating were investigated by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) analysis and field emission electron microscopy (FESEM). Transmission electron microscopy (TEM) illustrated the separation of clay layers which interacted with the epoxy resin. Electrochemical impedance data indicated that the epoxy cerium (III)–montmorillonite nanocomposite coatings were superior to the epoxy coatings in corrosion protection properties. The self-healing behavior of such coatings was due to the presence of cerium nitrate that could be released at the defects within the coating and hindered the corrosion reactions at the defective sites. It was shown that the best corrosion protection was achieved with nanocomposite coatings containing 4 wt% clay and 2 wt% cerium nitrate.     

Investigation of corrosion protection performance of epoxy coatings modified by polyaniline/clay nanocomposites on steel surfaces

In this study, polyaniline (PANI) and polyaniline/clay nanocomposites were prepared via in situ oxidative polymerization. The morphology of nanocomposites structures was investigated by X-ray diffraction (XRD). The chemical structures of PANI and PANI/clay nanocomposites were examined via Fourier transform infrared (FT-IR) spectroscopy. Polyaniline-based pigments were introduced into epoxy paint and applied on steel substrates. The effect of clay addition and the type of clay cation, including Na⁺ in natural clay (MMT) and alkyl ammonium ions in organo-modified montmorillonite (OMMT), on the anticorrosion performance of epoxy-based coatings was investigated through electrochemical Tafel test, electrochemical impedance spectroscopy and immersion measurements in NaCl solution. The stability of the adhesion of the neat and modified epoxy coatings to the steel surface was also examined. The results indicated that introduction of PANI/OMMT nanocomposite into epoxy paint results in improved anticorrosion properties in comparison with PANI/MMT and neat PANI.     

Thermal and anticorrosive properties of polyurethane/clay nanocomposites

A montmorillonite clay has been modified with two different quaternary ammonium salts, dilauryldimethylammonium bromide (LD) and 4,4-diaminodiphenylmethane (AP), to form the corresponding organophilic clays, LDM and APM. Two series of PU/clay nanocomposite materials, PU/LDM and PU/APM, were then prepared by the reaction of appropriate amounts of PPG, TDI and 1,4 butandiol, followed by addition of the various amounts of LDM or APM. The X-ray diffraction patterns and transmission electron micrographs of the nanocomposites revealed that the modified clay galleries were exfoliated or intercalated in the polyurethane matrix. In comparison with the corresponding pure PU, the results of the TGA and LOI measurements showed that the thermal stability and the flame retardancy of the PU/clay nanocomposites were significantly enhanced due to the presence of the dispersed nanolayers of the organophilic clay in the PU matrix. Using the Tafel method, the results of the electrochemical measurements, which included the corrosion potential, polarization resistance and corrosion current, showed that all the PU/clay nanocomposites, even with low clay loading, in the form of coating on stainless steel disk (SSD) exhibited better corrosion protection over the pure PU. The SSD coated with the composite containing 2 wt% of APM showed the lowest corrosion rate, which was one order lower than that of the SSD coated with the pure PU.     

Analysis of synergistic effect of nanozinc/nanoclay additives on the corrosion performance of zinc‐rich polyurethane nanocomposite coatings

The aim of this study was to analyze the synergistic effect of clay and zinc nanopigments. Therefore different percentages of Montmorillonite clay nanolayers were added to zinc‐rich polyurethane nanocomposites. Ultrasonication process was used to prepare polyurethane/nanozinc/nanoclay nanocomposites. Then coatings were applied on steel panels with composition of 10 wt% nanozinc and 0.5, 1, 1.5, and 2 wt% nanoclay. TEM and XRD were used to analyze the structural characteristics of the nanocomposites. The results of the structure analysis revealed the size of nanomaterials and confirmed the appropriate dispersion in polymer matrix. The anticorrosive properties of the nanocomposites were investigated using salt fog test and electrochemical impedance spectroscopy (EIS). The results of EIS showed that addition of clay nanolayers improves the corrosion resistance of coatings and the best corrosion performance obtained for the nanocomposite sample with 2 wt% nanoclay. Also, according to the results of the salt spray test, the sample with 2 wt% nanoclay showed the least H₂O penetration and exfoliation adjacent to the scratches. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Waterborne polyurethane-silica nanocomposite adhesives based on castor oil-recycled polyols: Effects of (3-aminopropyl)triethoxysilane (APTES) content on properties

Waterborne castor oil-recycled polyol based polyurethane-silica nanocomposite adhesives (WPU) with polymer matrix and silica nanoparticles chemically bonded have been successfully prepared through a sol-gel process. A series of waterborne polyurethane adhesives with hard segment contents from 71.3 to 74.5 wt%, were synthesized using an isophorone diisocyanate, 2-bis(hydroxymethyl) propionic acid, recycled castor oil-based as soft segments and (3-aminopropyl)triethoxysilane (APTES) as chain extender. The depolymerized oligoester obtained from glycolysis of poly(ethylene terephthalate) (PET) waste using triethylene glycol (TEG), was transesterified with castor oil (CO) which resulted in the formation of hydroxyl-functional polyester polyol, with hydroxyl value of 414 mgKOH g⁻¹. The molecular structures and mass of glycolyzed PET oligoesters, castor oil-based polyol and castor oil-based polyurethane-silica nanocomposite adhesives were estimated by Fourier transform infrared spectroscopy (FTIR) and gel permeation chromatography (GPC). The structure and properties of the resulting films were investigated by FTIR, wide angle X-ray diffraction measurement (XRD), thermogravimetry (TG) and differential scanning calorimetry (DSC). TG analysis indicated that APTES can improve the thermal stability of WPU. XRD showed that the crystallinity of WPU decreased with the increase alkoxysilane content. The extent of crosslinking was investigated to show a dependence on silica concentration, which increased the glass transition temperature and particle size of polyurethane nanocomposites with increasing alkoxysilane content due to the condensation of the alkoxysilane groups. The hardness, adhesion and gloss quality of the polyurethane films were also determined considering the effect of APTES content, so this paper confirmed the suitability of using these castor oil-based waterborne polyurethane-silica nanocomposites as new adhesive materials with high performance coatings materials. The experimental results reveal that the APTES and the hard segment content play a key role in controlling the structure and properties of the PU cast films based on castor oil-recycled polyols.     

Structure and Property of PU/MMT Nanocomposites by In-Situ Polymerization

A montmorillonite modified by octadecylammonium salt (OMMT) was prepared. A polyurethane (PU)/montmorillonite nanocomposite was synthesized by in-situ polymerization using the OMMT, poly(propylene glycol), 4,4-diphenylmethylate diisocyanate, and 1,4-butanediol. The MMT platelets were dispersed in PU matrix on a 10 ～ 50 nm scale. Compared to that of pure PU, the tensile strength and tear strength of the PU/OMMT nanocomposites increased, respectively, and the MMT platelets dispersed on a nanometer scale enhanced the PU. The temperature of initial weight loss of the PU/OMMT nanocomposites was lower than that of pure PU because of the acid catalytic action of protonated MMT platelets in the first thermodegradation step. But its temperature of initial weight loss was higher than that of pure PU because of the barrier effect of the MMT platelets in the second thermodegradation step.     

Reaction kinetics and characteristics of polyurethane/clay nanocomposites

The reaction behavior and physical properties of polyurethane (PU)/clay nanocomposite systems were investigated. Organically modified clay was used as nanofillers to formulate the nanocomposites. Differential scanning calorimetry was used to study the reaction behavior of the PU/clay nanocomposite systems. The reaction rate of the nanocomposite systems increased with increasing clay content. The reaction kinetic parameters of proposed kinetic equations were determined by numerical methods. The glass transition temperatures of the PU/clay nanocomposite systems increased with increasing clay content. The thermal decomposition behavior of the PU/clay nanocomposites was measured by using thermogravimetric analysis. X‐ray diffractometer and transmission electronic microscope data showed the intercalation of PU resin between the silicate layers of the clay in the PU/clay nanocomposites. A universal testing machine was used to investigate the tensile properties of the PU/clay nanocomposites. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1641–1647, 2005     

Thermal and surface characterization of polyurethane–urea clay nanocomposite coatings

This paper reports synthesis and characterization of polyurethane–urea (PU‐urea) and the nanocomposites derived from the PU‐urea with silicate clays. Organophilic montmorillonite cotreated by cetyl trimethyl ammonium bromide (CTAB) was synthesized and used to prepare PU‐urea/montmorillonite nanocomposites coatings. PU‐ureas were prepared from polyethylene glycol (PEG), polypropylene glycol (PPG), trimethylol propane (TMP), and 4,4′‐diphenylmethane diisocyanate (MDI) by reacting excess diisocyanate with polyether glycols. The excess isocyanate of the prepolymers was cured with atmospheric moisture. The synthesized moisture cured PU‐urea and nanocomposites were characterized by Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), differential scanning calorimetric (DSC), and angle resolved X‐ray photoelectron spectroscopy (AR‐XPS). The thermal stability of the PU‐urea nanocomposites was higher relative to the mother PU‐urea films. DSC results showed a slight enhancement in the soft segment glass transition temperature after 3 wt % clay loading. The surface properties showed an enrichment of the soft segment toward the surface. An enhancement in the hard segment composition in the nanocomposite coatings has resulted in enhancing the phase mixing process. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2393–2401, 2006     

Effect of functionalized multiwalled carbon nanotubes on weather degradation and corrosion of waterborne polyurethane coatings

A series of waterborne polyurethane/functionalized multiwalled carbon nanotube (WBPU/f-MWCNT) nanocomposite dispersions was prepared using three defined concentrations of 0.5, 1.0 and 2.0 wt% carboxyl functionalized multiwalled carbon nanotubes (f-MWCNTs). All dispersions were coated on mild steel and exposed under natural weather condition for a maximum of 365 days. Both exposed and unexposed coatings were characterized by potentiodynamic polarization (PDP) and X-ray photoelectron spectroscopy (XPS) analyses. The pristine WBPU coating showed slight degradation and corrosion protection. Inclusion of a higher content of f-MWCNTs significantly improved both the degradation and corrosion protection efficiencies of the coatings. Maximal degradation and corrosion protection was observed when 2.0 wt% f-MWCNT was mixed with WBPU for all of the coatings.     

Crystallization behavior of poly(p‐dioxanone)‐PU/montmorillonite nanocomposites prepared by chain‐extending reaction

Organo‐modified montmorillonites and poly(p‐dioxanone) (PPDO) diol prepolymers were used to prepare Poly(p‐dioxanone)‐PU/organic montmorillonite (PPDO‐PU/OMMT) nanocomposites by chain‐extending reaction. The crystallization behavior and spherulitic morphology of PPDO‐PU/OMMT nanocomposites were investigated by WXRD, differential scanning calorimetry, and polarized optical microscopy. The results show that the regularity of the chain structure plays a dominant role during the crystallization process rather than that of OMMT content and its dispersion status in PPDO matrix. With similar molecular weight and same OMMT content, PPDO‐PU/OMMT nanocomposite, which derived from lower molecular weight PPDO prepolymer, exhibits lower crystallization rate, melting point, and crystallinity. The influence of the clay content on the crystallization behavior highly depends on its dispersing state. The nucleating effect of OMMT can be only observed at high loading percentage. For the nanocomposites with low clay loading percentage, the retarding effect of exfoliated platelets on the chain‐ordering into crystal lamellae became the key factor. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Structure and properties of semiinterpenetrating polymer networks based on polyurethane and nitrochitosan

Two semiinterpenetrating polymer networks (semi‐IPNs) based on trihydroxyl methylpropane–polyurethane (T‐PU) or castor oil–polyurethane (C‐PU) were prepared by curing the mixed solution of the polyurethane prepolymer and nitrochitosan (NCH). During the curing process, crosslinking and grafting reaction between the molecules of the PU prepolymer and NCH occurred, because of the high reactivity of remaining hydroxyl groups in the NCH with ? NCO groups of PU. The structure of the original semi‐IPN sheets and the sheets treated with acetone were studied by infrared, ¹³C‐NMR, scanning electron microscopy, and dynamic mechanical analysis, showing interpenetration of NCH molecules into the PU networks. When nitrochitosan content (C_NCH) was lower than 10 wt %, the semi‐IPN sheets T‐PU and C‐PU had higher density and tensile strength (σ_b) than the systems with C_NCH more than 20%. The trihydroxymethyl propane‐based PU reacted more readily with nitrochitosan to form the semi‐IPNs than castor oil‐based PU. The semi‐IPN coatings T‐PU and C‐PU were used to coat cellophane, resulting in intimate interfacial bonding. The mechanical strength and water resistivity of the cellophane coated with T‐PU coating were improved remarkably. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 3109–3117, 2001     

Aliphatic polyurethane–montmorillonite nanocomposite coatings: Preparation,characterization, and anticorrosive properties

Polyurethane (PU)–clay nanocomposite coatings were prepared by a sonication method. The stability and morphology of these coatings was characterized by turbidometry, X‐ray diffraction, and transmission electron microscopy. The anticorrosive properties of these coatings were investigated by salt‐spray and electrochemical impedance spectroscopy methods. According to the results, dispersed nanoclay layers in the matrix of the nanocomposite coating compositions led to superior anticorrosive characteristics compared to those of pure PU coatings. The best results were obtained with coatings containing about 5 wt % clay. The resistance of the coating containing 5% clay was about 9.002 GΩ after 225 days of immersion in a 3.5 wt % NaCl solution, whereas it was only 97 kΩ for the pure PU coating. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

High corrosion protection of a polyaniline/organophilic montmorillonite coating for magnesium alloys

Epoxy coatings containing polyaniline (PANI) and polyaniline/organophilic montmorillonite (PANI/OMMT) powders were prepared on the surface of AZ91D magnesium alloy. The corrosion performance of the coatings was evaluated by electrochemical impedance spectroscopy (EIS) and open-circuit potential analysis in 3.5% NaCl. The results indicate that the PANI/OMMT coating retained its high corrosion protection for AZ91D magnesium alloy after 6000 h of immersion. The protective mechanism conferred by the PANI/OMMT coating was also discussed. The effects of oxygen on the protective mechanism of PANI were evaluated by EIS measurements in a 3.5% deaerated NaCl solution.     

Investigation of the corrosion protection behavior of natural montmorillonite clay/bitumen nanocomposite coatings

The influence of clay particles on the corrosion properties of bituminous coating was studied. Different percentages of natural montmorillonite clay (Cloisite Na⁺) were added to emulsified bitumen in water to make 2 wt.%, 3 wt.% and 4 wt.% of clay/bitumen nanocomposite coatings. The coatings were applied on steel 37. Optical microscopy and transmission electron microscopy (TEM) were employed to study the structure of nanocomposite. To investigate the anti-corrosion properties of the coated panels, electrochemical impedance spectroscopy (EIS) was used. The findings indicated that the addition of clay nanolayers improved corrosion resistance of the coatings. Moreover, increasing clay loading up to 4 wt.%, increased the corrosion resistance.     

Synthesis and Thermal Characterization of Polyurethane/Clay Nanocomposites Based on Palm Oil Polyol

Polyurethanes (PUs) are very versatile polymeric materials with a wide range of physical and chemical properties. PUs also have desirable properties, such as high abrasion resistance, tear strength, shock absorption, flexibility, and elasticity. Although they have poor thermal stability, it can be improved by using treated clay.

The objective of the present work is to study the thermal stability of polyurethane, polyurethane/montmorillonite (PU CTAB-mont 3% wt), and polyurethane/montmorillonite containing moca (PU Moca CTAB-mont 3% wt) nanocomposites based on palm oil polyol.

The interest of investigating the synthesis of polyurethane/clay nanocomposites based on palm oil polyol is to explore the use of palm oil polyol to partially replace petrochemical-based polyol.

Polyurethane/clay nanocomposites were prepared by a pre-polymer method and evaluated by Fourier Transform Infrared Spectra (FTIR) to determine micro-domain structures of segmented PU, PU CTAB-mont 3% wt, and PU Moca CTAB-mont 3% wt. The morphology of the nanocomposites was characterized by X-ray diffraction (X-RD), and flame retardant was investigated with thermogravimetric analysis (TGA). The result showed that in comparison with the virgin polyurethane, adding clay and moca demonstrated better thermal stability.