Ultrahigh‐Water‐Content,Superelastic, and Shape‐Memory Nanofiber‐Assembled Hydrogels Exhibiting Pressure‐Responsive Conductivity

High‐water‐content hydrogels that are both mechanically robust and conductive could have wide applications in fields ranging from bioengineering and electronic devices to medicine; however, creating such materials has proven to be extremely challenging. This study presents a scalable methodology to prepare superelastic, cellular‐structured nanofibrous hydrogels (NFHs) by combining alginate and flexible SiO₂ nanofibers. This approach causes naturally abundant and sustainable alginate to assemble into 3D elastic bulk NFHs with tunable water content and desirable shapes on a large scale. The resultant NFHs exhibit the integrated properties of ultrahigh water content (99.8 wt%), complete recovery from 80% strain, zero Poisson's ratio, shape‐memory behavior, injectability, and elastic‐responsive conductivity, which can detect dynamic pressure in a wide range (>50 Pa) with robust sensitivity (0.24 kPa^?1) and durability (100 cycles). The fabrication of such fascinating materials may provide new insights into the design and development of multifunctional hydrogels for various applications.     

High‐Performance,Solution‐Processed,and Insulating‐Layer‐Free Light‐Emitting Diodes Based on Colloidal Quantum Dots

Quantum‐dot light‐emitting diodes (QLEDs) may combine superior properties of colloidal quantum dots (QDs) and advantages of solution‐based fabrication techniques to realize high‐performance, large‐area, and low‐cost electroluminescence devices. In the state‐of‐the‐art red QLED, an ultrathin insulating layer inserted between the QD layer and the oxide electron‐transporting layer (ETL) is crucial for both optimizing charge balance and preserving the QDs' emissive properties. However, this key insulating layer demands very accurate and precise control over thicknesses at sub‐10 nm level, causing substantial difficulties for industrial production. Here, it is reported that interfacial exciton quenching and charge balance can be independently controlled and optimized, leading to devices with efficiency and lifetime comparable to those of state‐of‐the‐art devices. Suppressing exciton quenching at the ETL–QD interface, which is identified as being obligatory for high‐performance devices, is achieved by adopting Zn_0.9Mg_0.1O nanocrystals, instead of ZnO nanocrystals, as ETLs. Optimizing charge balance is readily addressed by other device engineering approaches, such as controlling the oxide ETL/cathode interface and adjusting the thickness of the oxide ETL. These findings are extended to fabrication of high‐efficiency green QLEDs without ultrathin insulating layers. The work may rationalize the design and fabrication of high‐performance QLEDs without ultrathin insulating layers, representing a step forward to large‐scale production and commercialization.     

A Solution‐Processable,Omnidirectionally Stretchable,and High‐Pressure‐Sensitive Piezoresistive Device

The development of omnidirectionally stretchable pressure sensors with high performance without stretching‐induced interference has been hampered by many challenges. Herein, an omnidirectionally stretchable piezoresistive pressure‐sensing device is demonstrated by combining an omniaxially stretchable substrate with a 3D micropattern array and solution‐printing of electrode and piezoresistive materials. A unique substrate structural design and materials mean that devices that are highly sensitive are rendered, with a stable out‐of‐plane pressure response to both static (sensitivity of 0.5 kPa^?1 and limit of detection of 28 Pa) and dynamic pressures and the minimized in‐plane stretching responsiveness (a small strain gauge factor of 0.17), achieved through efficient strain absorption of the electrode and sensing materials. The device can detect human‐body tremors, as well as measure the relative elastic properties of human skin. The omnidirectionally stretchable pressure sensor with a high pressure sensitivity and minimal stretch‐responsiveness yields great potential to skin‐attachable wearable electronics, human–machine interfaces, and soft robotics applications.     

Writing,Self‐Healing,and Self‐Erasing on Conductive Pressure‐Sensitive Adhesives

A simple strategy for enabling conductive pressure sensitive adhesives (PSAs) to work as light‐responsive materials is reported. Direct laser‐writing of PSA substrates was achieved by means of a continuous‐wave He‐Ne laser focused through the objectives of an optical microscope. This approach takes advantage of cooperative interplay between viscoelastic properties of PSAs and enhanced thermal conductivity provided by an extra overlayer of gold. In particular, the thickness of the gold layer is a crucial parameter for tuning the substrate responsiveness. Self‐healing and self‐degradation processes can be exploited for controlling the lifetime of the written information, whereas additional protective coatings can be introduced to achieve permanent storage.     

Beta‐Sheet‐Forming,Self‐Assembled Peptide Nanomaterials towards Optical,Energy, and Healthcare Applications

Peptide self‐assembly is an attractive route for the synthesis of intricate organic nanostructures that possess remarkable structural variety and biocompatibility. Recent studies on peptide‐based, self‐assembled materials have expanded beyond the construction of high‐order architectures; they are now reporting new functional materials that have application in the emerging fields such as artificial photosynthesis and rechargeable batteries. Nevertheless, there have been few reviews particularly concentrating on such versatile, emerging applications. Herein, recent advances in the synthesis of self‐assembled peptide nanomaterials (e.g., cross β‐sheet‐based amyloid nanostructures, peptide amphiphiles) are selectively reviewed and their new applications in diverse, interdisciplinary fields are described, ranging from optics and energy storage/conversion to healthcare. The applications of peptide‐based self‐assembled materials in unconventional fields are also highlighted, such as photoluminescent peptide nanostructures, artificial photosynthetic peptide nanomaterials, and lithium‐ion battery components. The relation of such functional materials to the rapidly progressing biomedical applications of peptide self‐assembly, which include biosensors/chips and regenerative medicine, are discussed. The combination of strategies shown in these applications would further promote the discovery of novel, functional, small materials.     

Sulfide‐Based Solid‐State Electrolytes: Synthesis,Stability, and Potential for All‐Solid‐State Batteries

Due to their high ionic conductivity and adeciduate mechanical features for lamination, sulfide composites have received increasing attention as solid electrolyte in all‐solid‐state batteries. Their smaller electronegativity and binding energy to Li ions and bigger atomic radius provide high ionic conductivity and make them attractive for practical applications. In recent years, noticeable efforts have been made to develop high‐performance sulfide solid‐state electrolytes. However, sulfide solid‐state electrolytes still face numerous challenges including: 1) the need for a higher stability voltage window, 2) a better electrode–electrolyte interface and air stability, and 3) a cost‐effective approach for large‐scale manufacturing. Herein, a comprehensive update on the properties (structural and chemical), synthesis of sulfide solid‐state electrolytes, and the development of sulfide‐based all‐solid‐state batteries is provided, including electrochemical and chemical stability, interface stabilization, and their applications in high performance and safe energy storage.     

Roll‐to‐Roll Cohesive,Coated, Flexible,High‐Efficiency Polymer Light‐Emitting Diodes Utilizing ITO‐Free Polymer Anodes

This paper reports solution‐processed, high‐efficiency polymer light‐emitting diodes fabricated by a new type of roll‐to‐roll coating method under ambient air conditions. A noble roll‐to‐roll cohesive coating system utilizes only natural gravity and the surface tension of the solution to flow out from the capillary to the surface of the substrate. Because this mechanism uses a minimally cohesive solution, the roll‐to‐roll cohesive coating can effectively realize an ultra‐thin film thickness for the electron injection layer. In addition, the roll‐to‐roll cohesive coating enables the fabrication of a thicker polymer anode film more than 250 nm at one time by modification of the surface energy and without wasting the solution. It is observed that the standard sheet resistance deviation of the polymer anode is only 2.32 Ω/□ over 50 000 bending cycles. The standard sheet resistance deviation of the polymer anode in the different bending angles (0 to 180°) is 0.313 Ω/□, but the case of the ITO‐PET is 104.93 Ω/□. The average surface roughness of the polymer anode measured by atomic force microscopy is only 1.06 nm. Because the surface of the polymer anode has a better quality, the leakage current of the polymer light‐emitting diodes (PLEDs) using the polymer anode is much lower than that using the ITO‐PET substrate. The luminous power efficiency of the two devices is 4.13 lm/W for the polymer anode and 3.21 lm/W for the ITO‐PET. Consequently, the PLEDs made by using the polymer anode exhibited 28% enhanced performance because the polymer anode represents not only a higher transparency than the ITO‐PET in the wavelength of 560 nm but also greatly reduced roughness. The optimized the maximum current efficiency and power efficiency of the device show around 6.1 cd/A and 5.1 lm/W, respectively, which is comparable to the case of using the ITO‐glass.     

Phase‐Engineered Type‐II Multimetal–Selenide Heterostructures toward Low‐Power Consumption,Flexible, Transparent,and Wide‐Spectrum Photoresponse Photodetectors

Phase‐engineered type‐II metal–selenide heterostructures are demonstrated by directly selenizing indium‐tin oxide to form multimetal selenides in a single step. The utilization of a plasma system to assist the selenization facilitates a low‐temperature process, which results in large‐area films with high uniformity. Compared to single‐metal–selenide‐based photodetectors, the multimetal–selenide photodetectors exhibit obviously improved performance, which can be attributed to the Schottky contact at the interface for tuning the carrier transport, as well as the type‐II heterostructure that is beneficial for the separation of the electron–hole pairs. The multimetal–selenide photodetectors exhibit a response to light over a broad spectrum from UV to visible light with a high responsivity of 0.8 A W^?1 and an on/off current ratio of up to 10². Interestingly, all‐transparent photodetectors are successfully produced in this work. Moreover, the possibility of fabricating devices on flexible substrates is also demonstrated with sustainable performance, high strain tolerance, and high durability during bending tests.