Structural and optical properties of polycrystalline CdSexTe1−x (0 ≤ x ≤ 0.4) thin films

CdSe_xTe_1−x (0 ≤ x ≤ 0.4) ternary thin films have been deposited on quartz substrates at room temperature by a single source thermal evaporation. X-ray diffraction patterns and transmission electron microscope micrographs of these films showed that the films were of polycrystalline texture over the whole range studied and exhibit predominant cubic (zinc blende) structure with strong preferential orientation of the crystallites along (1 1 1) direction. Linear variation of the lattice constant with mole fraction x is observed obeying Vegard's law. The dependence of the optical constants, the refractive index n and extinction coefficient k, of the films on the mole fraction x was studied in the spectral range of 400-2500 nm. The normal dispersion of the refractive index of the films could be described using the Wemple-DiDomenco single-oscillator model. CdSe_xTe_1−x thin films of different composition have two direct and indirect transitions corresponding to energy gaps and . The variation in either or with x indicates that this system belongs to the amalgamation type. The variation follows a subquadratic dependence and the bowing parameters were found to be 0.36 and 0.48 eV for the direct, and indirect energy gaps, respectively. Direct linear variation of the ratio N/m^* with x is observed.     

GexNbSe2 and GexNbS2 intercalation compounds

The structures of two intercalation compounds, Ge_∼0.2NbSe₂ and Ge_∼0.3NbS₂ were investigated by single crystal X-ray diffraction and electron microscopy (selected area electron diffraction (SAED), high resolution electron microscopy (HRTEM) and X-ray microanalysis by energy dispersive spectroscopy (XEDS)). Crystal structure determinations of the average structure of the intercalation compounds 2H-Ge_0.217NbSe₂ and 4H-Ge_0.288NbS₂ are reported: the selenide compound crystallizes in the space group P6₃/mmc with a = 3.4560(9) Å and c = 12.966(3) Å and adopts the 2H-NbSe₂ structure-type, while the sulfide compound crystallizes in the P6₃mc space group, with a = 3.3392(9) Å and c = 25.404(7) Å with a structure-type 4H_c-NbS₂ which it is known for TaSe₂. In both structures the germanium atoms are located in the empty octahedral positions of the van der Waals gap between the NbX₂ (X = S, Se) layers. Electron diffraction patterns from several Ge_xNbSe₂ crystal flakes show different superstructures and exhibit diffracted diffuse intensity: weak satellites corresponding to and 2a₀ × 2a₀ superstructures were observed for x ∼ 0.15 (a₀ is the basal lattice parameter of the host structure). For x ∼ 0.25-0.33, the same type of satellite is observed with a stronger intensity. For x ∼ 0.5 only satellites corresponding to the superstructure were present. In the case of Ge_xNbS₂, with 0.10 < x < 0.25, the germanium atoms are ordered in domains with an superstructure. In some crystals disorder along the c-axis has been observed.     

Crystal and magnetic structure and cation distribution of Mn2−xV1+xO4 spinels (x = 0, 1/3 and 1)

We synthesized the spinel-type compounds belonging to the Mn_2−xV_1+xO₄ series with x = 0, 1/3 and 1 as polycrystalline powders. Crystal and magnetic structures were refined using synchrotron X-ray and neutron powder diffraction. At 300 K all members crystallize in the cubic system, space group , and show a structural transition at low temperature, changing to a tetragonal symmetry (space group I4₁/amd). Cations distributions between octahedral and tetrahedral sites were refined from neutrons diffraction (ND) data and explained based on crystal field stabilization energies (CFSE) and ionic radii. The magnetic unit cell is the same as the crystallographic one, having identical symmetry relations. The magnetic structure was refined as an arrangement of collinear spins, antiferromagnetically ordered, parallel to the c-axis of the unit cell. The refined site magnetic moments are smaller than those obtained from hysteresis cycles of the M vs. H measurements, indicating that some non-collinear disordered component coexists with the ordered component along the c-axis.     

Synthesis of LaRhAsO and superconductivity within the LaFe1−xRhxAsO system

The compound LaRhAsO is reported for the first time. We show that an entire LaFe_1−xRh_xAsO solid solution is possible. Powder X-ray diffraction, resistivity and magnetic measurements were carried out on polycrystalline samples. Superconductivity onset is observed for x = 0.05, 0.10, and 0.15 with a maximum resistivity of ∼16 K. The fluorine doped samples of the new compound LaRhAsO remain metallic down to 5 K.     

Dielectric, electrical and magnetoelectric characterization of (x)Ni0.8Zn0.2Fe2O4 + (1 − x)Pb0.93La0.07(Zr0.60Ti0.40)O3 composites

The structural, electrical, dielectric, magnetic and magnetoelectric properties of (x)Ni_0.8Zn_0.2Fe₂O₄ + (1 − x)Pb_0.93La_0.07(Zr_0.60Ti_0.40)O₃ (x = 0, 0.15, 0.30, 0.45 and 1) have been studied by means of various experimental techniques. Polycrystalline samples of this series have been prepared by the double sintering ceramic method. X-ray diffraction data analysis revealed purity of the composites. Microstructural analysis using scanning electron microscopy mode depicts the presence of two phases in contact with each other. Dielectric properties were studied at and well above room temperature. Temperature dependent variation of the dielectric constant show diffused phase transition which can be well described by fitting the Lorentz-type relation, . Observation of well-saturated ferroelectric hysteresis loop and magnetic hysteresis loop for composites indicates that ferroelectric and magnetic ordering exist simultaneously at room temperature. The static value of magneto electric voltage coefficient (α_E) has been studied as a function of magnetic field at room temperature for all the composites. The maximum value of α_E is 7.53 mV/(cm Oe) for 85% PLZT-15% NZFO composites.     

Thermochemical studies on SrFe12O19(s)

The citrate-nitrate gel combustion route was used to prepare SrFe₁₂O₁₉(s) powder sample and the compound was characterized by X-ray diffraction analysis. A solid-state electrochemical cell of the type: (−)Pt, O₂(g)/{CaO(s) + CaF₂(s)}//CaF₂(s)//{SrFe₁₂O₁₉(s) + SrF₂(s) + Fe₂O₃(s)}/O₂(g), Pt(+) was used for the measurement of emf as a function of temperature from 984 to 1151 K. The standard molar Gibbs energy of formation of SrFe₁₂O₁₉(s) was calculated as a function of temperature from the emf data and is given by: (SrFe₁₂O₁₉, s, T)/kJ mol⁻¹ (±1.3) = −5453.5 + 1.5267 × (T/K). Standard molar heat capacity of SrFe₁₂O₁₉(s) was determined in two different temperature ranges 130-325 K and 310-820 K using a heat flux type differential scanning calorimeter (DSC). A heat capacity anomaly was observed at 732 K, which has been attributed to the magnetic order-disorder transition from ferrimagnetic state to paramagnetic state. The standard molar enthalpy of formation, (298.15 K) and the standard molar entropy, (298.15 K) of SrFe₁₂O₁₉(s) were calculated by second law method and the values are −5545.2 kJ mol⁻¹ and 633.1 J K⁻¹ mol⁻¹, respectively.     

Synthesis and crystal structures of Ba6Mg11F34 and the solid solutions Ba6Mg11−xMxF34 (M = Mn, Fe) and luminescence of Ba6Mg11F34: Eu

Ba₆Mg₁₁F₃₄, a new compound of the pseudobinary BaF₂-MgF₂ system, has been synthesized by solid state techniques from stoichiometric amounts of BaF₂ and MgF₂ and its crystal structure determined by single crystal X-ray diffraction (space group P, a=7.5084(6), b=9.9192(8), c=10.0354(8) Å, α=81.563(2), β=72.402(2), γ=71.198(1)°, 3899 structure factors, 233 parameters, R(F²>2σ(F²))=0.018, wR(F² all) = 0.046). It is isotypic with the copper(II) analogue, Ba₆Cu₁₁F₃₄. The main features of the structure are a network of [MgF₆] octahedra and three different [BaF_x] polyhedra with x=12, 11+1 and 13. Ba₆Mg_11−xFe_xF₃₄ and Ba₆Mg_11−xMn_xF₃₄ solid solutions were prepared and their composition determined by single crystal structure analyses. The luminescence properties of Ba₆Mg₁₁F₃₄ doped with Eu²⁺ were studied using fluorescence spectroscopy. The observed luminescence was pale blue with a maximum at 465 nm.     

Synthesis and characterization of a new organic dihydrogenomonophosphate [3,5-(CH3O)2C6H3NH3]2(H2PO4)2

Chemical preparation, crystal structure, calorimetric studies and spectroscopic investigation are given for a new organic cation dihydrogenomonophosphate [3,5-(CH₃O)₂C₆H₃NH₃]₂(H₂PO₄)₂. This compound is triclinic with the following unit cell parameters: a=9.030(6) Å, b=16.124(5) Å, c=8.868(3) Å, α=75.04(3)°, β=110.71(4)°, γ=104.61(1)°, Z=4, V=1148.0(1) Å³, Z=2 and ρ_cal.=1.454 g cm⁻³. Crystal structure was solved and refined to R=0.04, 2752 independent reflections. The atomic arrangement can be described as inorganic layers of H₂PO₄⁻ anions parallel to planes, between which are located the organic groups. Solid-state and MAS-NMR spectroscopies are in agreement with the X-ray structure. Ab initio calculations allow the attribution of the phosphorous and carbon signals to the independent crystallographic sites and to the various atoms of the organic groups.     

R3Mn1.5CuV0.5O9 (R = Y, Ho, Er, Tm, Yb and Lu) and Lu3Mn3−3xCu2xVxO9: New noncentrosymmetric oxides related to YMnO3

We report formation of new noncentrosymmetric oxides of the formula, R₃Mn_1.5CuV_0.5O₉ for R = Y, Ho, Er, Tm, Yb and Lu, possessing the hexagonal RMnO₃ (space group P6₃cm) structure. These oxides could be regarded as the x = 0.5 members of a general series R₃Mn_3−3xCu_2xV_xO₉. Investigation of the Lu-Mn-Cu-V-O system reveals the existence of isostructural solid solution series, Lu₃Mn_3−3xCu_2xV_xO₉ for 0 < x ≤ 0.75. Magnetic and dielectric properties of the oxides are consistent with a random distribution of Mn³⁺, Cu²⁺ and V⁵⁺ atoms that preserve the noncentrosymmetric RMnO₃ structure.     

New compounds Cu2MnTi3S8 and Cu2NiTi3S8 with thiospinel structure

Cu₂MnTi₃S₈ and Cu₂NiTi₃S₈ compounds were prepared by high-temperature synthesis. The crystal structure of these quaternary phases was investigated by X-ray powder diffraction. The compounds are described in the thiospinel structure (space group ) with the lattice constants a = 1.00353(1) nm (Cu₂MnTi₃S₈) and a = 0.99716(1) nm (Cu₂NiTi₃S₈). The atomic parameters were calculated in anisotropic approximation (R_I = 0.0456 and R_I = 0.0520 for Cu₂MnTi₃S₈ and Cu₂NiTi₃S₈, respectively).     

Negative thermal expansion and electrical properties of Mn3(Cu0.6NbxGe0.4 − x)N (x = 0.05-0.25) compounds

Bulk materials with the general formula of Mn₃(Cu_0.6Nb_xGe_0.4 − x)N (x = 0.05, 0.1, 0.15, 0.2, 0.25), Mn₃(Cu_0.6Ge_0.4)N and Mn₃(Cu_0.7Ge_0.3)N were fabricated by mechanical ball milling and solid state sintering. Their thermal expansion coefficients and electrical conductivities were investigated in the temperature range of 80-300 K. It is found that the temperature interval of negative temperature expansion behavior is about 95 K in the samples of Mn₃(Cu_0.6Nb_0.15Ge_0.25)N and Mn₃(Cu_0.6 Nb_0.2Ge_0.2)N, which is twice as large as that of Mn₃(Cu_0.7Ge_0.3)N. The negative thermal expansion of Mn₃(Cu_0.6Nb_0.15Ge_0.25)N can reach to − 19.5 × 10⁻⁶ K^− 1 in the temperature range of 165 to 210 K. The electrical conductivity of this series materials is in a level of about 2.5 × 10⁶ (Ω m)^− 1.