模糊PID控制器的稳定性分析

构造出一种PID型模糊控制器，并证明了这种模糊控制器近似于一种变参数的PID控制器，以PID模型为基础，基于无源性定量对模型PID控制器的稳定性进行分析，导出了使模糊PID控制器稳定的充分条件，为设计稳定的模糊PID控制器提供了理论指导。     

Passive fuzzy controller design via observer feedback for stochastic Takagi-Sugeno fuzzy models with multiplicative noises

This paper investigates the fuzzy control problem of a class of nonlinear continuous-time stochastic systems with achieving the passivity performance. A model-based observer feedback fuzzy control utilizing the concept of so-called parallel distributed compensation (PDC) is employed to stabilize the class of nonlinear stochastic systems that are represented by the Takagi-Sugeno (T-S) fuzzy models. Based on the Lyapunov criteria, the Linear Matrix Inequality (LMI) technique is used to synthesize the observer feedback fuzzy controller design such that the closed-loop system satisfies stability and passivity constraints, simultaneously. Finally, a numerical example is given to demonstrate the applicability and effectiveness of the proposed design method.     

Stability analysis of nonlinear multivariable Takagi-Sugeno fuzzycontrol systems

Points out how the nonlinearities involved in multivariable Takagi-Sugeno (T-S) fuzzy control systems could originate complex behavior phenomena, such as multiple equilibrium points or limit cycles, that cannot be detected using conventional stability analysis techniques. In the paper, the application of MIMO frequency-domain methods to predict the existence of multiple equilibria and of limit cycles are presented. The proposed method is based on the formulation of a Lur'e problem from the original structure of a T-S fuzzy system with a fuzzy controller. Furthermore, this technique makes straightforward the application of input-output stability techniques such as the multivariable circle criterion, also called the conicity criterion, and the harmonic balance method. Moreover, in the paper, the application of the harmonic balance method has been generalized to the case of a MIMO fuzzy system with asymmetric nonlinearities and improved by the decreasing conservatism. A new and more general stability index which could be used to perform a bifurcation analysis of fuzzy control systems is presented. The paper includes a collection of examples where the advantages of the proposed approach are made explicit comparing it to the input-output conicity criterion and the Lyapunov direct method     

Stability of fuzzy PID controllers

In this paper, the stability of fuzzy PID controllers is studied. Using the passivity theorem, the stability region of the effective PID parameters can be derived and hence some sufficient conditions for a stable fuzzy controller can be obtained. With these conditions satisfied, a stable set of fuzzy rules can be designed easily     

利用模糊系统的自适应模糊控制器

针对非线性系统控制,设计了利用TSK(Takagi-Sugeno-Kang)模糊系统的自适应模糊控制器。所设计的自适应控制方法是参考模型自适应控制方法,而且利用Lyapunov函数保证了闭环系统的稳定性,同时推导了最优的自适应控制规律。首先,根据控制对象的输入输出数据建立TSK模糊模型,然后,由TSK模糊模型设计初期的TSK模糊控制器,并根据自适应规律随时调整模糊控制器参数。倒立摆系统的仿真实验验证了所设计的自适应模糊控制器的有效性。     

A self-tuning fuzzy controller for a class of multi-input multi-output nonlinear systems

This paper presents a systematic design procedure of a multivariable fuzzy controller for a general Multi-Input Multi-Output (MIMO) nonlinear system with an input-output monotonic relationship or a piecewise monotonic relationship for each input-output pair. Firstly, the system is modeled as a Fuzzy Basis Function Network (FBFN) and its Relative Gain Array (RGA) is calculated based on the obtained fuzzy model. The proposed multivariable fuzzy controller is constructed with two orthogonal fuzzy control engines. The horizontal fuzzy control engine for each system input-output pair has a hierarchical structure to update the control parameters online and compensate for unknown system variations. The perpendicular fuzzy control engine is designed based on the system RGA to eliminate the multivariable interaction effect. The resultant closed-loop fuzzy control system is proved to be passive stable as long as the augmented open-loop system is input-output passive. Two sets of simulation examples demonstrate that the proposed fuzzy control strategy can be a promising way in controlling multivariable nonlinear systems with unknown system uncertainties and time-varying parameters.     

Design and analysis of optimal controller for fuzzy systems with input constraint

In this paper, we present a design method of the optimal and robust controller subject to the constraint on control inputs for continuous-time Takagi-Sugeno (TS) fuzzy systems. In order to establish this design method, we consider an optimal and robust control problem for nonlinear dynamic systems. For this problem, we present an analytic way which can provide the optimal controller for nonlinear dynamic systems by the dynamic programming approach and the inverse optimal approach. Moreover, we analyze the robustness property of the proposed optimal controller with respect to a class of input uncertainties by the passivity approach. Then, based on the theoretical results presented in this paper, we formulate the design problem of the optimal and robust controller with input constraint for continuous-time TS fuzzy systems as the semidefinite programming problem, and find the controller by solving it. The usefulness of the proposed approach is illustrated by considering the three-axis attitude stabilization problem of rigid spacecraft.     

Design of a Networked Tracking Control System With a Data-based Approach

Tracking control is a very challenging problem in the networked control system (NCS), especially for the process with blurred mechanism and where only input-output data are available. This paper has proposed a data-based design approach for the networked tracking control system (NTCS). The method utilizes the input-output data of the controlled process to establish a predictive model with the help of fuzzy cluster modelling (FCM) technology. Then, the deduced error and error change in the future are treated as inputs of a fuzzy sliding mode controller (FSMC) to obtain a string of future control actions. These candidate control actions in the controller side are delivered to the plant side. Thus, the network induced time delays are compensated by selecting appropriate control action. Simulation outputs prove the validity of the proposed method.      

基于输入输出线性化的自适应模糊滑模航迹控制

针对船舶直线航迹控制的非线性特性,设计一种基于输入输出线性化的自适应模糊滑模控制器,并利用Lyapunov理论,证明该系统在所设计控制器作用下全局渐近稳定,Simulink仿真结果表明,所设计控制器能够有效抑制常规滑模所固有的稳态抖振现象,且在参数摄动及风浪干扰下具有强鲁棒性,较好的实现了对设定航迹的跟踪。     

Analysis and synthesis of discrete nonlinear passive systems via affine T–S fuzzy models

The article considers the analysis and synthesis problem for the discrete nonlinear systems, which are represented by the discrete affine Takagi–Sugeno (T–S) fuzzy models. The state feedback fuzzy controller design methodology is developed to guarantee that the affine T–S fuzzy models achieve Lyapunov stability and strict input passivity. In order to find a suitable fuzzy controller, an Iterative Linear Matrix Inequality (ILMI) algorithm is employed in this article to solve the stability conditions for the closed-loop affine T–S fuzzy models. Finally, the application of the proposed fuzzy controller design methodology is manifested via a numerical example with computer simulations.     

Stabilization of nonlinear systems using sampled-data output-feedback fuzzy controller based on polynomial-fuzzy-model-based control approach

This paper investigates the stability of sampled-data output-feedback (SDOF) polynomial-fuzzy-model-based control systems. Representing the nonlinear plant using a polynomial fuzzy model, an SDOF fuzzy controller is proposed to perform the control process using the system output information. As only the system output is available for feedback compensation, it is more challenging for the controller design and system analysis compared to the full-state-feedback case. Furthermore, because of the sampling activity, the control signal is kept constant by the zero-order hold during the sampling period, which complicates the system dynamics and makes the stability analysis more difficult. In this paper, two cases of SDOF fuzzy controllers, which either share the same number of fuzzy rules or not, are considered. The system stability is investigated based on the Lyapunov stability theory using the sum-of-squares (SOS) approach. SOS-based stability conditions are obtained to guarantee the system stability and synthesize the SDOF fuzzy controller. Simulation examples are given to demonstrate the merits of the proposed SDOF fuzzy control approach.     

Passivity-based tracking control of an omnidirectional mobile robot using only one geometrical parameter

This paper presents an output feedback tracking control scheme for a three-wheeled omnidirectional mobile robot, based on passivity property and a modified generalized proportional integral (GPI) observer. The proposed control approach is attractive from an implementation point of view, since only one robot geometrical parameter (i.e., contact radius) is required. Firstly, a nominal dynamic model is given and the passivity property is analyzed. Then the controller is designed based on passivity property and a modified GPI observer. The controller design objective is to preserve the passivity property of the robot system in the closed-loop system, which is conceptually different from the traditional model-based control methodology. Particularly, the designed control system takes full advantage of the robot natural damping. Therefore, only considerably small or non differential feedback is needed. In addition, theoretical analysis is given to show the closed-loop stability behavior. Finally, experiments are conducted to validate the effectiveness of the proposed control system design in both tracking and robustness performance.     

Robust adaptive fuzzy control of unknown chaotic systems

This paper presents a robust adaptive fuzzy control algorithm for controlling unknown chaotic systems. The control approach encompasses a fuzzy system and a robust controller. The fuzzy system is designed to mimic an ideal controller, based on sliding-mode control. The robust controller is designed to compensate for the difference between the fuzzy controller and the ideal controller. The parameters of the fuzzy system, as well as uncertainty bound of the robust controller, are tuned adaptively. The adaptive laws are derived in the Lyapunov sense to guarantee the stability of the controlled system. Numerical simulations show the effectiveness of the proposed approach.     

Incorporating prior knowledge in fuzzy model identification

This paper presents an algorithm for incorporating a priori knowledge into data-driven identification of dynamic fuzzy models of the Takagi-Sugeno type. Knowledge about the modelled process such as its stability, minimal or maximal static gain, or the settling time of its step response can be translated into inequality constraints on the consequent parameters. By using input-output data, optimal parameter values are then found by means of quadratic programming. The proposed approach has been applied to the identification of a laboratory liquid level process. The obtained fuzzy model has been used in model-based predictive control. Real-time control results show that, when the proposed identification algorithm is applied, not only are physically justified models obtained but also the performance of the model-based controller improves with regard to the case where no prior knowledge is involved.     

Robust stability analysis and fuzzy-scheduling control for nonlinear systems subject to actuator saturation

Takagi-Sugeno (TS) fuzzy models can provide an effective representation of complex nonlinear systems in terms of fuzzy sets and fuzzy reasoning applied to a set of linear input-output submodels. In this paper, the TS fuzzy modeling approach is utilized to carry out the stability analysis and control design for nonlinear systems with actuator saturation. The TS fuzzy representation of a nonlinear system subject to actuator saturation is presented. In our TS fuzzy representation, the modeling error is also captured by norm-bounded uncertainties. A set invariance condition for the system in the TS fuzzy representation is first established. Based on this set invariance condition, the problem of estimating the domain of attraction of a TS fuzzy system under a constant state feedback law is formulated and solved as a linear matrix inequality (LMI) optimization problem. By viewing the state feedback gain as an extra free parameter in the LMI optimization problem, we arrive at a method for designing state feedback gain that maximizes the domain of attraction. A fuzzy scheduling control design method is also introduced to further enlarge the domain of attraction. An inverted pendulum is used to show the effectiveness of the proposed fuzzy controller.     

Design and implementation of the tree-based fuzzy logic controller

In this paper, a tree-based approach is proposed to design the fuzzy logic controller. Based on the proposed methodology, the fuzzy logic controller has the following merits: the fuzzy control rule can be extracted automatically from the input-output data of the system and the extraction process can be done in one-pass; owing to the fuzzy tree inference structure, the search spaces of the fuzzy inference process are largely reduced; the operation of the inference process can be simplified as a one-dimensional matrix operation because of the fuzzy tree approach; and the controller has regular and modular properties, so it is easy to be implemented by hardware. Furthermore, the proposed fuzzy tree approach has been applied to design the color reproduction system for verifying the proposed methodology. The color reproduction system is mainly used to obtain a color image through the printer that is identical to the original one. In addition to the software simulation, an FPGA is used to implement the prototype hardware system for real-time application. Experimental results show that the effect of color correction is quite good and that the prototype hardware system can operate correctly under the condition of 30 MHz clock rate.     

Quadratic-Stability Analysis of Fuzzy-Model-Based Control Systems Using Staircase Membership Functions

This paper presents the stability analysis of fuzzy-model-based (FMB) control systems. Staircase membership functions are introduced to facilitate the stability analysis. Through the staircase membership functions approximating those of the fuzzy model and fuzzy controller, the information of the membership functions can be brought into the stability analysis. Based on the Lyapunov-stability theory, stability conditions in terms of linear-matrix inequalities (LMIs) are derived in a simple and easy-to-understand manner to guarantee the system stability. The proposed stability-analysis approach offers a nice property that includes the membership functions of both fuzzy model and fuzzy controller in the LMI-based stability conditions for a dedicated FMB control system. Furthermore, the proposed stability-analysis approach can be applied to the FMB control systems of which the membership functions of both fuzzy model and fuzzy controller are not necessarily the same. Greater design flexibility is allowed to choose the membership functions during the design of fuzzy controllers. By employing membership functions with simple structure, it is possible to lower the structural complexity and the implementation cost. Simulation examples are given to illustrate the merits of the proposed approach.      

非线性系统的间接自适应模糊输出反馈监督控制

In this paper, an indirect adaptive fuzzy output feedback controller with supervisory mode for a class of unknown nonlinear systems is developed. The proposed approach does not need the availability of the state variables, moreover, a supervisory controller is appended to the adaptive fuzzy controller to force the state to be within the constraint set. Therefore, if the adaptive fuzzy controller cannot maintain the stability, the supervisory controller starts to work to guarantee stability. On the other hand, if the adaptive fuzzy controller works well, the supervisory controller will be deactivated. The overall adaptive fuzzy control scheme guarantees the stability of the whole closed-loop systems. The simulation results confirm the effectiveness of the proposed method.     

Indirect Adaptive Fuzzy Output Feedback Control with Supervisory Controller for Uncertain Nonlinear Systems

In this paper, an indirect adaptive fuzzy output feedback controller with supervisory mode for a class of unknown nonlinear systems is developed. The proposed approach does not need the availability of the state variables, moreover, a supervisory controller is appended to the adaptive fuzzy controller to force the state to be within the constraint set. Therefore, if the adaptive fuzzy controller cannot maintain the stability, the supervisory controller starts to work to guarantee stability. On the other hand, if the adaptive fuzzy controller works well, the supervisory controller will be de-activated. The overall adaptive fuzzy control scheme guarantees the stability of the whole closed-loop systems. The simulation results confirm the effectiveness of the proposed method.