钴、镍纳米线及其异质结的制备与磁性研究

采用脉冲电沉积技术在氧化铝模板中制备了单晶钴、镍纳米线阵列和镍/钴纳米线异质结阵列.分别用场发射扫描电镜、透射电镜、X射线衍射仪、物理性能测试系统对纳米线阵列的微观形貌、结构和性能进行了表征与研究.结果表明,所制备的磁性纳米线有很大的长径比,易磁化方向均为纳米线长轴方向.纳米线异质结阵列在易磁化方向具有较大的矫顽力和矩形比,可用作高密度垂直磁记录材料.     

不同结构镍纳米线阵列的制备及其磁性

采用直流电沉积在多孔有序氧化铝模板中制备了不同结构的有序镍纳米线阵列。采用扫描电子显微镜和透射电子显微镜对所制备的镍纳米线的形貌和结构进行了表征。研究了镍纳米线不同结构对镍纳米线阵列磁性性能的影响规律。当电沉积电压为2.5V时制备的镍纳米线为多晶结构;电沉积电压4V时,镍纳米线为沿[220]择优取向的单晶结构;电沉积电压大于5V时,择优取向由[220]转为[111]方向。磁滞回线结果表明,单晶镍纳米线阵列与多晶纳米线阵列相比具有更高的矩形度,沿[111]择优取向的单晶纳米线相比沿[220]取向的单晶镍纳米线具有更大的矩形度,表现出显著的磁各向异性。     

不同结构镍纳米线阵列的制备及其磁性

采用直流电沉积在多孔有序氧化铝模板中制备了不同结构的有序镍纳米线阵列。采用SEM和TEM对所制备的镍纳米线的形貌和结构进行了表征。研究了镍纳米线不同结构对镍纳米线阵列磁性性能的影响规律．当电沉积电压为2．5V时制备的镍纳米线为多晶结构；电沉积电压4V时，镍纳米线为沿[220]择优取向的单晶结构；电沉积电压＞5V时，择优取向由[220]转为[111]方向．磁滞回线结果表明，单晶镍纳米线阵列与多晶纳米线阵列相比具有更高的矩形度，沿[111]择优取向的单晶纳米线相比沿[220]取向的单晶镍纳米线具有更大的矩形度，表现出显著的磁各向异性。     

自感知镍纳米线/水泥基复合材料的制备及压敏性能

通过多孔氧化铝模板交流电沉积的方法制备了镍纳米线,以镍纳米线为导电填料、聚羧酸减水剂为分散剂,首次制备了新型的自感知镍纳米线/水泥基复合材料。通过SEM、TEM和XRD测试方法,研究了镍纳米线与镍纳米线水泥基复合材料的显微结构,与此同时,用四电极伏安法研究了镍纳米线水泥基复合材料的渗流阈值和压敏性。结果显示：所得的镍纳米线直径约为65 nm,长径比约为50;聚羧酸型减水剂能有效提高镍纳米线的分散性;水泥基复合材料的电阻率随镍纳米线的掺量增加呈现渗流特性,渗流阈值为0.5vol%;掺加1.0vol%镍纳米线的水泥基复合材料的应变灵敏度系数高达509.2,远高于电阻应变片的2.0,适用于混凝土结构应力监测的传感元件。     

AAO样膜法电沉积镍纳米线表征及电化学行为研究

采用AAO样模法在多孔阳极氧化铝膜上电沉积镍金属微粒,从而制备出一维镍纳米线阵列.多孔阳极氧化铝膜的制备是采用直流阳极氧化的方法,在EG&G PARC公司的M175型恒电位仪上直流电沉积镍金属微粒,获得镍纳米线和阳极氧化铝膜的组装体系.本实验采用日本电子公司JEM-5600LV扫描式电子显微镜SEM观察阳极氧化铝膜的尺寸和形态;利用X射线衍射仪XRD和电子探针对纳米线的结构和组分进行分析.在EG&G PARC公司的M175型恒电位仪上通过阴极极化曲线测试技术,考察了镍盐溶液中的电沉积过程.由阴极极化曲线分析得出,沉积电流在0.5～3 mA/cm2为最佳范围.电沉积过程中要控制沉积温度,一般25～30℃左右较为合适.     

镍纳米粉的阳极弧等离子体制备工艺条件与性能研究

为了研究阳极弧放电等离子体方法在制备镍纳米粉过程中电弧电流、气体压力等工艺参数对纳米粉产率及粒度的影响,寻求制备金属纳米粉的最佳工艺参数.利用X射线衍射(XRD)、透射电子显微镜(TEM)和相应选区电子衍射(ED)、BET吸附等测试手段对样品的形貌、晶体结构、粒度分布、比表面积等性能进行了表征.研究结果表明:本法所制得的镍纳米粉的晶格结构为fcc结构.呈规则的球形链状分布,适当控制工艺参数就能制取粒径范围在20-100nm的金属纳米粉,在其他工艺参数不变条件下,气压升高或电弧电流增大,都会使粒度增大,产率增大.     

直流电沉积法制备镍纳米线（阵列）及其磁性能研究

采用直流电化学沉积方法,在经过阶梯降压处理的多孔阳极氧化铝模板纳米级孔洞中,制备出直径约30nm,长度超过10μm的金属镍纳米线(阵列).通过场发射扫描电子显微镜,透射电子显微镜,X射线衍射仪,振动样品磁强计对所制备的样品进行形貌、结构及相关性能的表征和测试.结果表明所制备的镍纳米线排列规整,形态均匀,呈fcc结构,且沿[111]方向择优生长,易磁化方向沿纳米线长轴方向.     

微波加热合成SiC纳米线的研究

采用单质Si粉和酚醛树脂为原料、均混、成型、碳化, 并以10℃/min的升温速率在1300～1400℃/0.5～2h的微波加热条件下制备了SiC纳米线. 用SEM和TEM观察所得SiC纳米线形貌, EDX检测样品成分. 结果发现: 所制备的SiC纳米线具有典型的SiC/SiO₂芯－壳式缆状结构特征, 直径约为20～100nm. 分析认为, 在微波加热条件下, 液态Si在SiC纳米线生长过程中起着至关重要的作用, 既具有催化作用, 同时又是制备SiC纳米线的关键原料.     

“自上而下”制作硅化镍纳米线

提出了“自上而下”制作硅化镍纳米线的方法，研究了制备出的纳米结构的形成过程及微观形貌。这种金属硅化物纳米线的制作方法对于集成电路制造很有应用价值。     

CuS纳米线阵列的制备

将多孔阳极氧化铝模板(AAO)的电化学沉积技术与真空硫化技术相结合,在制备Cu纳米线的基础之上,制备得到了CuS纳米线阵列.采用扫描电子显微镜电镜和X射线衍射仪对二次氧化的AAO模板和所得Cu与CuS纳米线的形貌和结构进行了表征,结果表明所得CuS纳米线不仅具有良好的有序阵列,而且具有多晶结构.在硫化过程中,随着硫化温度的升高,CuS结晶程度增大,在500～550℃时,达到最大的结晶程度.     

热交换器的分类及优缺点分析

热交换器是将不同温度介质之间的热量通过热传导的形式,由高温介质传递给低温介质,使介质达到生产所需温度的工艺设备,也可作为一种节能设备使用.通过对不同热交换器的结构分析,总结不同热交换器的优缺点、适用环境,为生产工艺设计人员及设备制造单位在选择可降低能耗、提高效率的设备上提供参考.     

聚苯胺及其复合物的制备和结构及形貌分析

通过化学氧化法分别制备盐酸,盐酸和十二烷基苯磺酸,碳纳米管(MWNTs-COOH)掺杂的聚苯胺,利用红外光谱,紫外光谱,扫描电子显微镜和透射电子显微镜对所制备聚苯胺的结构和形貌进行分析。分析不同掺杂物对聚苯胺的结构和形貌的影响;同时研究了超声波作用对聚苯胺形貌以及聚苯胺包裹MWNTs-COOH情况的影响。     

Modelling and computation of curing and damage of thermosets

The curing of thermosets is a complex process involving the transition from a fluid into a (visco-) elastic solid. This phase transition comes along with an increase in stiffness and a volume shrinkage of the polymer. The latter may lead to severe residual strains and stresses, which in turn can cause damage in the final, usually quasi-brittle material. In this contribution a constitutive model is developed which takes into account the curing of a thermosetting material together with the process-induced damage as resulting from curing shrinkage. The curing of the material is governed by a phenomenological hypoelastic constitutive equation which includes temporal evolutions for stiffness and volume shrinkage. Thermal and viscous effects are neglected in the present study. An isotropic gradient-enhanced damage model is adapted to describe the damage evolution. The curing-damage model is implemented into a finite element code and numerical examples for thermosetting materials demonstrate that the proposed model is capable to predict cure-induced damage in thermosets.     

Thermodynamic similarity and prediction of the properties and characteristics of substances and processes

Principles of the theory of thermodynamic similarity are considered in application to all aggregate states of a substance, including phase transitions, and to the change in dissipative structures in open systems.Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 53, No. 5, pp. 709–716, November, 1987.     

碳化硼陶瓷增韧补强和致密化研究现状及其展望

碳化硼陶瓷具有极高的硬度,然而其低韧性、低抗弯强度、难以致密化限制了它的广泛应用.已有一些研究集中于碳化硼陶瓷增韧补强和致密化,对这一方面国内外研究进展进行了归纳与评述,阐明各种增韧补强和致密化方法的优缺点,提出碳化硼陶瓷增韧补强和致密化研究值得发展的一些方向.     

Measurement and analysis of elastic and anelastic properties of alumina and silicon carbide

Measurements of dynamic Young's modulus, E, and damping as a function of temperature, T, were made for alumina and silicon carbide. The Young's modulus data were compared with some from the literature, and analysed in terms of a theoretical framework relating the Debye temperature, θD, with the elastic constants. For both materials this analysis yielded a ratio T₀/θ_D which was near 0.4, where T₀ is an empirical fitting constant for the plot of (E(0)−E)/T versus 1/T (E(0) is the value of E at 0 K). The analysis of the damping data in terms of an Arrhenius type dependence led to effective activation energies near kT, where k is Boltzmann's constant. This revised version was published online in November 2006 with corrections to the Cover Date.     

Mechanisms of Corosion and Oxidation of Metals and Alloys

Selected topics in field of the study of the mechanisms of corrosion and of oxidation of metals or alloys are presented. The first part reports a new model for the mechanism of the breakaway oxidation of ferritic stainless steels in water vapour. The second part is devoted to the physico‐chemical aspects of oxidation and presents experimental methods useful in the kinetic modelling applied to two alloys, the zircalloy‐4 and an AlMg5 % in the liquid state. In the third part the physical and numerical modelling of the stress corrosion cracking behaviour in face‐centered cubic (fcc) alloys is detailed, which enables the study of the influence of macroscopic parameters (such as the temperature or hydrogen activity) on the fracture process.     

Preparation and characterization of phosphate and arsenate apatites of strontium and their solid solutions

Samples of phosphate and arsenate apatites of strontium and six of their solid solutions, spread over the entire compositional range, were prepared by a wet method. They were characterized by chemical, X-ray, electron microscopic and infrared analyses. The validity of Vegard's law established the homogeneity of the solid solutions.     

检定和校准证书的异同与应用

本文介绍了检定和校准以及证书的两点相同、五点不同之处,说明了对检定证书和校准证书的正确应用。