民用建筑室内空气品质与人体健康

就人们日益关注的室内空气品质问题进行描述，解释了室内空气品质的概念，指出其影响因素，分析室内空气对人体健康的影响，并提出改进室内空气品质的途径。     

室内空气品质及其主要影响因素

介绍了人们对室内空气品质的认识和评价现状，并着重分析综述了影响室内空气品质的因素。     

空调建筑室内空气品质与污染控制

简述了空调建筑室内空气污染的影响及由来，阐述了室内空气品质概念的确立过程，介绍了空调建筑室内空气品质的影响因素，并针对建筑中空调系统的作用、结合室内空气品质评估要素提出了控制空调建筑室内空气品质的措施。     

对影响室内空气品质因素的分析

简述了室内空气品质的概念，分析了各类因素对室内空气品质的影响，提出了相应的控制方法和改善室内空气品质的有效途径，以创造良好的室内空气品质。     

空调系统新风和回风对室内空气品质的影响

分析了目前空调系统新风和回风对室内空气品质的影响，认为室内污染的不断增加是室内品质变坏的主要原因；新风的质量直接影响室内空气品质；回风是室内空气的二次污染源，导出了回风对室内空气污染的理论计算公式，文中认为新风率是20%能明显提高室内空气品质。     

浅谈影响室内空气品质的因素及处理措施

阐述了空气品质的标准及其特点，分析了影响室内空气品质的多个因素，从消除微生物对室内空气的影响、消除室内污染源等方面，提出了保证室内空气品质应采取的措施。     

办公楼的室内空气品质与新风

根据对上海市区7幢甲级办公楼的室内空气品质和新风量的现场测试结果，试图分析办公楼的室内空气品质和新风量的关系，以及室外空气品质对室内空气品质的影响。     

大型商业中心室内空气品质分析及措施探讨

通过对两家采用空调系统的大型综合性商业中心的空气品质进行监测，取得大量的数据，分析了室内空气污染物浓度的影响因素，并提出了改善室内空气品质的措施。     

室内空气品质研究的探讨

针对室内空气品质是人们生活和工作最重要的环境因素之一,并通过目前国内外室内空气品质的定义和评价,分析了几种可能影响室内空气品质的因素,并探讨了空气质量的控制问题,从而充分改善室内空气品质。     

空调系统对室内空气品质的影响分析

结合空调系统对室内空气品质产生的危害，分析了空调系统设计对室内空气品质的潜在影响，详细地介绍了设计中改善空气品质的途径，以使空调系统满足人们日益提高的室内空气品质要求。     

Airborne particulate matter and gaseous air pollutants in residential structures in Lodi province, Italy

The province of Lodi is located in northern Italy on the Po River plain, where high background levels of air pollutants are prevalent. Lodi province is characterized by intensive agriculture, notably animal husbandry. This paper assesses indoor levels of selected airborne pollutants in 60 homes in the province, with special attention to size-fractionated particulate matter (PM). Indoor PM?.? concentrations are frequently higher than current guidelines. PM?? and nitrogen dioxide also exceed the respective guideline recommendations in some cases, noting that 24-h nitrogen dioxide levels were compared with an annual limit value. All other studied pollutant levels are below current international guidelines. Among indoor PM size fractions, PM?.? is predominant in terms of mass concentrations corresponding to 57% of PM?? in summer and 71% in winter. A strong seasonal trend is observed for all studied pollutants, with higher levels in winter corresponding to changes in ambient concentrations. The seasonal variation in PM?? is largely due to PM?.? increase from summer to winter. Summer indoor PM levels are mainly from indoor-generated particles, while particles of outdoor origin represent the main contribution to winter indoor PM levels. On average, indoor concentrations of coarse PM are mostly constituted by indoor-generated particles. PRACTICAL IMPLICATIONS: This study presents a comparison between measured indoor concentrations in the study area and indoor air quality guideline criteria. Accordingly, particulate matter (PM) and NO? are identified as key pollutants that may pose health concerns. It is also found that indoor PM in residential units is mainly constituted by particles with aerodynamic diameters <0.5 μm, especially in winter. Risk mitigation strategies should be focused on the reduction in indoor levels of NO? and ultrafine and fine particles, both infiltrated from outdoors and generated by indoor sources.     

A review on reducing indoor particulate matter concentrations from personal-level air filtration intervention under real-world exposure situations

Improving air quality in indoor environments where people live is of importance to protect human health. In this systematic review, we assessed the effectiveness of personal-level use of air filtration units in reducing indoor particulate matters (PM) concentrations under real-world situations following systematic review guidelines. A total of 54 articles were included in the review, in which 20 randomized controlled/crossover trials that reported the changes in indoor fine PM (PM_2.5) concentrations were quantitatively assessed in meta-analysis. Standardized mean differences (SMDs) were calculated for changes in indoor PM concentrations following air filtration interventions. Moderate-to-large reductions of 11%–82% in indoor PM_2.5 concentrations were observed with SMD of −1.19 (95% CI: −1.50, −0.88). The reductions in indoor PM concentrations varied by geographical locations, filtration technology employed, indoor environmental characteristics, and air pollution sources. Most studies were graded with low-to-moderate risk of bias; however, the overall certainty of evidence for indoor PM concentration reductions was graded at very low level. Considering the effectiveness of indoor air filtration under practical uses, socio-economic disparities across study populations, and costs of air filter replacement over time, our results highlight the importance of reducing air pollution exposure at the sources.     

上海地区冬季住宅室内外颗粒物浓度的相关性

对上海市某住宅建筑室内外PM10、PM2.5、PM1的浓度进行了测量,研究了最小通风量(外门窗关闭)条件下3种天气时颗粒浓度随时间变化的规律以及相关性,分析了颗粒物浓度与环境温湿度参数之间的关系。研究结果显示,测试期间,室内外空气中细颗粒(PM 2.5)占可吸入颗粒(PM 10)浓度比例分别达65%和87%以上;无明显室内源时,I/O比值小于1且随粒径减小而减小;室内外颗粒浓度相关性与粒径大小有关系,PM1、PM2.5的浓度相关性大于PM10。研究还表明,颗粒物浓度的关联性与天气状况有关系,多云、雨天和阴天时浓度关联性有显著差别;颗粒物的浓度受到室内外温湿度的影响,且受天气状况影响而呈现复杂性。     

Numerical investigation on the ingress of particulate matter from ambient air into the inlet of a building air handling unit

The transportation of ambient particulate matter (PM) from outdoor air into the inlet of a mechanical building ventilation system is poorly understood. No studies have examined the effect commonly used commercial air handling unit (AHU) inlet designs have upon the migration of PM from the ambient environment into the building ventilation system, and implications of this on energy consumption and indoor air quality (IAQ). Through the numerical analysis of commercial AHU inlets, the differences in concentration of PM in ambient air and that within AHUs were determined, more commonly referred to as Aspiration Efficiency (AE %). A 20–50% difference in particle concentrations between ambient air and the in-AHU concentration was observed between forward and rear-facing AHUs relative to ambient wind direction and speed, and at the maximum ventilation flow rate. Furthermore, a decrease in the ventilation flow rates resulted in a significant reduction in PM concentrations entering the rear-facing AHU. Increasing the Stoke number led to lower AE as a continuous decrease was observed for both rear-facing inlets. The findings of this paper show that AHU inlet design has significant implications on IAQ and building energy consumption, and scope exists to design these inlets to impact both aspects positively.     

Indoor air quality investigation at air-conditioned and non-air-conditioned markets in Hong Kong

To characterize indoor air quality at the markets in Hong Kong, three non-air-conditioned and two air-conditioned markets were selected for this study. The indoor air pollutants measured included PM(10) (particulate matters with aerodynamic diameter less than 10 microm), total bacteria count (TBC), carbon monoxide (CO), nitric oxide (NO), nitrogen dioxide (NO(2)) and sulfur dioxide (SO(2)). The indoor and outdoor concentrations of these target air pollutants at these markets were measured and compared. The effects of air conditioning, temperature/relative humidity variation and different stalls on the indoor air quality were also investigated. The results indicated that all of the average indoor concentrations of PM(10), TBC, CO and NO(2) at the markets were below the Hong Kong Indoor Air Quality Objectives (HKIAQO) standards with a few exceptions for PM(10) and TBC. The elevated PM(10) concentrations at Hung Hom, Ngau Tau Kok and Wan Chai markets were probably due to the air filtration of outdoor airborne particulates emitted from vehicular exhaust, whereas high concentrations of airborne bacteria at Sai Ying Pun and Tin Shing markets were linked to the use of air conditioning. Correlation analysis demonstrated that indoor bacteria concentrations were correlated with temperature and relative humidity. The operation of air conditioning did not significantly reduce the levels of air pollutants at the markets. However, the higher indoor/outdoor ratios demonstrated that the operation of air conditioning had influence on the levels of bacteria at the markets. It was found that average PM(10) concentration at poultry stalls was higher than the HKIAQO standard of 180 microg/m(3), and was over two times that measured at vegetable, fish and meat stalls. Furthermore, the concentration of airborne bacteria at the poultry stalls was as high as 1031 CFU/m(3), which was above the HKIAQO standard of 1000 CFU/m(3). The bacteria levels at other three stalls were all below the HKIAQO standard. Statistical analysis indicated that there were no significant differences among the four stalls for CO, NO(x) and SO(2).     

Particle size distribution and composition in a mechanically ventilated school building during air pollution episodes

Particle count-based size distribution and PM(2.5) mass were monitored inside and outside an elementary school in Salt Lake City (UT, USA) during the winter atmospheric inversion season. The site is influenced by urban traffic and the airshed is subject to periods of high PM(2.5) concentration that is mainly submicron ammonium and nitrate. The school building has mechanical ventilation with filtration and variable-volume makeup air. Comparison of the indoor and outdoor particle size distribution on the five cleanest and five most polluted school days during the study showed that the ambient submicron particulate matter (PM) penetrated the building, but indoor concentrations were about one-eighth of outdoor levels. The indoor:outdoor PM(2.5) mass ratio averaged 0.12 and particle number ratio for sizes smaller than 1 microm averaged 0.13. The indoor submicron particle count and indoor PM(2.5) mass increased slightly during pollution episodes but remained well below outdoor levels. When the building was occupied the indoor coarse particle count was much higher than ambient levels. These results contribute to understanding the relationship between ambient monitoring station data and the actual human exposure inside institutional buildings. The study confirms that staying inside a mechanically ventilated building reduces exposure to outdoor submicron particles. PRACTICAL IMPLICATIONS: This study supports the premise that remaining inside buildings during particulate matter (PM) pollution episodes reduces exposure to submicron PM. New data on a mechanically ventilated institutional building supplements similar studies made in residences.     

The spatial and temporal variations in PM10 mass from six UK homes

People spend the majority of their time indoors mostly in the domestic environment, where their health may be effected by significant airborne particulate pollution. The indoor/outdoor air quality at six homes in Wales and Cornwall was investigated, based on different locations (urban, suburban, rural) and household characteristics (smokers, non-smokers). The spatial and temporal variations in PM10 mass were monitored for a calendar year, including ambient weather conditions. The activities of individuals within a household were also recorded. Monitoring of PM10 took place inside (kitchen, living room, bedroom) homes, along with concomitant collections outdoors. Samples were subjected to gravimetric analysis to determine PM10 concentrations and examined by scanning electron microscopy to identify the types of particles present on the filters. The results of the study show there are greater masses of PM10 indoors, and that the composition of the indoor PM10 is controlled by outdoor sources, and to a lesser extent by indoor anthropogenic activities, except in the presence of tobacco smokers. The indoor and outdoor PM10 collected was characterised as being a heterogeneous mixture of particles (soot, fibres, sea salt, smelter, gypsum, pollen and fungal spores).     

Physico-chemical characterization of indoor/outdoor particulate matter in two residential houses in Oslo, Norway: measurements overview and physical properties--URBAN-AEROSOL Project

Indoor/outdoor measurements have been performed in the Oslo metropolitan area during summer and winter periods (2002-2003) at two different residential houses. The objective of the measurement study was to characterize, physically and chemically, the particulate matter (PM) and gaseous pollutants associated with actual human exposure in the selected places, and their indoor/outdoor relationship. In this paper, we focus on the PM measurements and examine the relationship between the indoor and outdoor PM concentrations taking into account the ventilation rate, indoor sources and meteorological conditions. The indoor/outdoor measurements indicate the important contribution of the outdoor air to the indoor air quality and the influence of specific indoor sources such as smoking and cooking to the concentration of PM inside houses. However, no specific correlation was found between the indoor/outdoor concentration ratio and the meteorological parameters. This study provides information on the physical characteristics and the relationship of indoor to outdoor concentration of particulate matter in residential houses. Moreover, the parameters that influence this relationship are discussed. The results presented here are specific to the sampled houses and conditions used and provide data on the actual human exposure characteristics which occur in the spatial and temporal scales of the present study.     

Measurements of children's exposures to particles and nitrogen dioxide in Santiago, Chile

An exposure study of children (aged 10-12 years) living in Santiago, Chile, was conducted. Personal, indoor and outdoor fine and inhalable particulate matter (< 2.5 .m in diameter, PM2.5 and < 10 microm in diameter, PM10, respectively), and nitrogen dioxide (NO2) were measured during pilot (N = 8) and main (N = 20) studies, which were conducted during the winters of 1998 and 1999, respectively. For the main study, personal, indoor and outdoor 24-h samples were collected for five consecutive days. Similar mean personal, indoor and outdoor PM2.5 concentrations (69.5, 68.5 and 68.1 microg/m3, respectively) were found. However, for coarse particles (calculated as the difference between measured PM10 and PM2.5, PM2.5-10), indoor and outdoor levels (35.4 and 47.4 microg/m3) were lower than their corresponding personal exposures (76.3 microg/m3). Indoor and outdoor NO2 concentrations were comparable (35.8 and 36.9 ppb) and higher than personal exposures (25.9 ppb). Very low ambient indoor and personal O3 levels were found, which were mostly below the method's limit of detection (LOD). Outdoor particles contributed significantly to indoor concentrations, with effective penetration efficiencies of 0.61 and 0.30 for PM2.5 and PM2.5-10, respectively. Personal exposures were strongly associated with indoor and outdoor concentrations for PM2.5, but weakly associated for PM2.5-10. For NO2, weak associations were obtained for indoor-outdoor and personal-outdoor relationships. This is probably a result of the presence of gas cooking stoves in all the homes. Median I/O, P/I and P/O ratios for PM2.5 were close to unity, and for NO2 they ranged between 0.64 and 0.95. These ratios were probably due to high ambient PM2.5 and NO2 levels in Santiago, which diminished the relative contribution of indoor sources and subjects' activities to indoor and personal PM2.5 and NO2 levels.     

Results of a residential indoor PM2.5 sampling program before and after a woodstove changeout

During 2005-2007, a woodstove changeout program was conducted in a Rocky Mountain valley community in an effort to reduce ambient levels of PM(2.5). In addition to changes in ambient PM(2.5), an opportunity was provided to evaluate the changes in indoor air quality when old stoves were replaced with US Environmental Protection Agency (EPA)-certified woodstoves. PM(2.5) samples were measured in 16 homes prior to and following the changeout. For each sampling event, PM(2.5) mass was continuously measured throughout the 24-h sampling periods, and organic/elemental carbon (OC/EC) and associated chemical markers of woodsmoke were measured from quartz filters. Results showed that average PM(2.5) concentrations and maximum PM(2.5) concentrations were reduced by 71% and 76%, respectively (as measured by TSI DustTraks). Levoglucosan was reduced by 45% following the introduction of the new woodstove. However, the concentrations of resin acids, natural chemicals found in the bark of wood, were increased following the introduction of the new woodstove. There were no discernible trends in methoxphenol levels, likely due to the semi-volatile nature of the species that were measured. Although there is some uncertainty in this study regarding the amount of ambient PM infiltration to the indoor environment, these findings demonstrated a large impact on indoor air quality following this intervention. PRACTICAL IMPLICATIONS: Emissions from residential woodstoves are an important air quality issue (both indoors and ambient) in many regions throughout the US and the world. More specifically, woodstoves have been identified as a major source of PM(2.5) in valley locations throughout the Northern Rocky Mountains, where biomass combustion is the predominant source of home heating. In this study, we present results that demonstrate the dramatic reduction in PM(2.5) concentrations (as measured by TSI, Inc. DustTrak PM(2.5) air samplers) inside homes following the replacement of old, polluting woodstove with new EPA-certified woodstoves.