Three-dimensional optoelectronic stacked processor by use of free-space optical interconnection and three-dimensional VLSI chip stacks

We present a demonstration system under the three-dimensional (3D) optoelectronic stacked processor consortium. The processor combines the advantages of optics in global, high-density, high-speed parallel interconnections with the density and computational power of 3D chip stacks. In particular, a compact and scalable optoelectronic switching system with a high bandwidth is designed. The system consists of three silicon chip stacks, each integrated with a single vertical-cavity-surface-emitting-laser-metal-semiconductor-metal detector array and an optical interconnection module. Any input signal at one end stack can be switched through the central crossbar stack to any output channel on the opposite end stack. The crossbar bandwidth is designed to be 256 Gb/s. For the free-space optical interconnection, a novel folded hybrid micro-macro optical system with a concave reflection mirror has been designed. The optics module can provide a high resolution, a large field of view, a high link efficiency, and low optical cross talk. It is also symmetric and modular. Off-the-shelf macro-optical components are used. The concave reflection mirror can significantly improve the image quality and tolerate a large misalignment of the optical components, and it can also compensate for the lateral shift of the chip stacks. Scaling of the macrolens can be used to adjust the interconnection length between the chip stacks or make the system more compact. The components are easy to align, and only passive alignment is required. Optics and electronics are separated until the final assembly step, and the optomechanic module can be removed and replaced. By use of 3D chip stacks, commercially available optical components, and simple passive packaging techniques, it is possible to achieve a high-performance optoelectronic switching system.     

新型光缓存器及2×622Mb／sATM光交换系统

给出了一种新型的光缓存器的结构，以解决在ＡＴＭ光交换中的信元碰撞问题。这种缓存器是由光纤延迟线、光波导开关阵及非线性半导体光放大器构成。文中还报告了一种用于交换各用户不同速率的信元（可达６２２Ｍｂ／ｓ）的ＡＴＭ光交换实验系统，系统的总容量为了１．２Ｇｂ／ｓ。     

Testbed for a scalable terabit optical local area network

The design of a fiber-optic local area network (LAN) demonstration system is described. A complete LAN system would consist of an array of 16 personal computers (PC's), where each PC has a network interface card (NIC) with a parallel fiber-optic datalink to a centralized optoelectronic switch core. The centralized core switches the data generated by 16 NIC's, up to 128 Gbit/s of bandwidth. The demonstrator is designed to scale to terabits of bandwidth by use of an emerging optoelectronic technology, i.e., integrated complementary metal-oxide semiconductor (CMOS) substrates with vertical-cavity surface-emitting laser (VCSEL) and photodetector optical input and output. A subset of the complete system was constructed and is operational. A prototype NIC card, with Motorola Optobus VCSEL transceivers for the optical datalinks, was constructed and is described. A prototype high-speed bipolar switch core, with statically configurable electrical positive-emitter coupled-logic 16 x 16 crossbar switches, CMOS field-programmable gate arrays, and Motorola Optobus transceivers, was constructed and is described. We successfully demonstrated the transmission of high-speed packetized data from one NIC card, through 10 m of parallel fiber ribbon and the centralized switch core, and back to the NIC. We summarize our experiences on the design and testing of our first demonstration system and our development toward a terabit switch core.     

The designs of a scalable optical packet switching architecture

Abstract

This paper proposes a new switching architecture to be used in all optical packet switching networks. The proposed switch is derived from an original 2 × ?2 two‐stage multi‐buffer switched delay line based optical switching node, known as an M‐Quadro node. By incorporating bypass lines into the M‐Quadro architecture and employing a novel switch control strategy, the optical packet switching node can effectively resolve packet contentions, thus reducing the packet deflection probability substantially. Furthermore, we show that such architecture is scalable for a generic multiple stages optical packet switch with a larger number of input/output ports.     

Terabit optical local area networks for multiprocessing systems

The design of a scalable optical local area network formultiprocessing systems is described. Each workstation has aparallel-fiber-ribbon optical link to a centralized complementarymetal-oxide silicon (CMOS) switch core, implemented on a singlecompact printed circuit board (PCB). When the Motorola Optobusfiber technology is used, each workstation has a data bandwidth of 6.4Gbits/s to the core. A centralized switch core interconnecting 32workstations supports a 204-Gbit/s aggregate data bandwidth. Theswitch core is based on a conventional broadcast-and-selectarchitecture, implemented with parallel CMOS integrated circuits(IC's). The switch core scales well; by incorporation of theCMOS optoelectronic IC's with optical input-output, the electricalcore can be reduced to a single-chip optoelectronic IC with terabitcapacities. A prototype of an optoelectronic switch core has been fabricated and is described. The appeal of the architectureincludes its reliance on commercially available parallel-fibertechnology, its reliance on the well-developed markets of local areanetworks and networks of workstations, and its smooth scalability from the electrical to optical domains as technology matures.     

Polarization-controlled multistage switch based on polarization-selective computer-generated holograms

We describe a polarization-controlled free-space optical multistage interconnection network based on polarization-selective computer-generated holograms: optical elements that are capable of imposing arbitrary, independent phase functions on horizontally and vertically polarized monochromatic light. We investigate the design of a novel nonblocking space-division photonic switch architecture. The multistage-switch architecture uses a fan-out stage, a single stage of 2 x 2 switching elements, and a fan-in stage. The architecture is compatible with several control strategies that use 1 x 2 and 2 x 2 polarization-controlled switches to route the input light beams. One application of the switch is in a passive optical network in which data is optically transmitted through the switch with a time-of-flight delay but without optical-to-electrical conversions at each stage. We have built and characterized a proof-of-principle 4 x 4 free-space switching network using three cascaded stages of arrayed birefringent computer-generated holographic elements. Data modulated at 20 MHz/channel were transmitted through the network to demonstrate transparent operation.     

Focal shift and focal switch of partially coherent flat-topped beams passing through an alignment and misalignment lens system with aperture

The focal shift and focal switch of partially coherent flat-topped (PCFT) beams passing through a lens system with an aperture are studied in detail. We have shown that a focal shift is also present for beams propagating through an aligned optical system and the amount of the focal shift depends not only on the radius aperture of the focusing system, but also on the spatial coherence and order of the flat-topped beam of the incident partially coherent light. A new phenomenon called ‘focal switch’ occurs for misaligned optical systems, i.e. the focal shift experiences a sudden transition as the aligned optical system becomes misaligned, and the influence of the spatial coherence, order of flat-topped beam and aperture size reduction, on the focal switch is investigated in detail. Finally, the necessary conditions for the focal switch to take place are investigated.     

Compact all-optical bypass-exchange switch

An electronically or optically addressed compact optical bypass-exchange switch is investigated and experimentally demonstrated.The switch is polarization based and consists of a controllable λ/2 platesandwiched between two polarizing beam displacers. The input and the output signals propagate normal to the switching array, which makes the switch extremely attractive for cascading switching arrays, as found in multistage interconnect networks. A complete, all-optical interconnection network is suggested.     

Novel all-optical logic gate using an add/drop filter and intensity switch

A novel design of all-optical logic device is proposed. An all-optical logic device system composes of an optical intensity switch and add/drop filter. The intensity switch is formed to switch signal by using the relationship between refraction angle and signal intensity. In operation, two input signals are coupled into one with some coupling loss and attenuation, in which the combination of add/drop with intensity switch produces the optical logic gate. The advantage is that the proposed device can operate the high speed logic function. Moreover, it uses low power consumption. Furthermore, by using the extremely small component, this design can be put into a single chip. Finally, we have successfully produced the all-optical logic gate that can generate the accurate AND and NOT operation results.     

VCSEL-array-based angle-multiplexed optoelectronic crossbar interconnects

A large crossbar switch, which is a desirable building block for any low-latency interconnect network, is difficult to implement because of many practical problems associated with digital electronics. We propose a new method for implementing a large optoelectronic crossbar interconnect to take advantage of a unique principle of optics. Based on an emerging vertical-cavity surface-emitting laser (VCSEL) technology, a passive angle-multiplexed beam-steering architecture is proposed as a key component of the optoelectronic crossbar. Various optical system parameters are evaluated. Because there is no optical fan-out power loss, the interconnect capacity of the proposed system is determined by the diffraction-limited receiver power cutoff, and therefore interconnection of more than 1000 nodes with a per node bandwidth of 1 GHz is possible with today's technology. A 64-element VCSEL-array-based proof-of-principle optical system for studying the interconnect scalability has been built. Details of the features of the proposed system, its advantages and limitations, demonstration experimental results, and their analyses are presented.     

Reprogrammable optical phase array

A novel reprogrammable optical phase array (ROPA) device is presented as a reconfigurable electro-optic element. One specific application of the ROPA, a 1 x 6 electro-optic space switch, is fully described. Switching angles are within 2 degrees , and switching is achieved through a complementary metal-oxide semiconductor (CMOS) controlled, diffraction based, optical phase array in a bulk BaTiO3 crystal. The crystal is flip-chipped to the CMOS chip, creating a compact fully integrated device. The design, optical simulation, and fabrication of the device are described, and preliminary experimental results are presented.     

Board-to-Board Free-Space Optical Interconnections Passing through Boards for a Bookshelf-Assembled Terabit-Per-Second-Class ATM Switch

We propose free-space optical interconnections for a bookshelf-assembled terabit-per-second-class ATM switch. Thousands of arrayed optical beams, each having a rate of a few gigabits per second, propagate vertically to printed circuit boards, passing through some boards, and are connected to arbitrary transmitters and receivers on boards by polarization controllers and prism arrays. We describe a preliminary experiment using a 1-mm-pitch 2 x 2 beam-collimator array that uses vertical-cavity surface-emitting laser diodes. These optical interconnections can be made quite stable in terms of mechanical shock and temperature fluctuation by the attachment of reinforcing frames to the boards and use of an autoalignment system.     

一种新型的ATM交换结构——二分输出排队结构

提出了一种新型的ATM交换结构－－基于二分输出排队交换结构,它可在现有工艺水平下大幅度降低存储器和总线的操作速度,从而提高时分交换机的容量,并在降低实现成本的同时,保持了同基本输出排队结构相同时延性能及时分交换机的多播功能。     

Elliptical Hermite-cosine-Gaussian beam and its propagation characteristics

A new kind of light beam named the elliptical Hermite-cosine-Gaussian beam (EHCosGB) is introduced in this paper by using a tensor method. An analytical propagation expression for an EHCosGB passing through an axially nonsymmetrical optical system is derived by using vector integration. By virtue of numerical simulations, the propagation properties of EHCosGBs through a free space and a focusing system are illustrated, respectively. The results indicate that an EHCosGB on the input plane can be regarded as the elliptical Hermite-Gaussian beam (EHGB) modulated by the cosine curves with certain oscillating frequency. Some of the neighboring lobes are combined and TEM-type Hermite-cosh-Gaussian beams are formed during the propagation.     

First principle study of the self‐switching characteristics of the guanine based single optical molecular switch using carbon nanotube electrodes

The switching property of an optical single molecular switch based on a single DNA molecule guanine with a single walled carbon nanotube electrode has been investigated using density functional theory along with non‐equilibrium Green''s function based first principle approach. The semi‐empirical model of this single bio‐molecular switch has been operated at an ultra‐high 25 THz frequency in mid‐UV range. This single bio‐molecule comprises switching activity upon UV photo‐excitation. The influence of the highest occupied molecular orbital and lowest unoccupied molecular orbital gap and the quantum ballistic transmission into the switching activity are discussed in detail in this study. It has been observed that the maximum ON–OFF ratio, i.e. 327 is obtained at +0.8 V bias voltage. Theoretical results show that current through the twisted form is sufficiently larger than the straightened form, which recommends that this structure has smart prospective application in the future generation switching nanotechnology.Inspec keywords: molecular electronic states, density functional theory, ab initio calculations, DNA, organic compounds, molecular electronics, Green''s function methods, molecular biophysics, single‐wall carbon nanotubes, optical switches, orbital calculationsOther keywords: nonequilibrium Green''s function, semiempirical model, single bio‐molecular switch, UV photo‐excitation, lowest unoccupied molecular orbital gap, first principle study, single optical molecular switch, switching property, optical single molecular switch, single DNA molecule guanine, single walled carbon nanotube electrode, density functional theory, highest occupied molecular orbital gap, switching nanotechnology     

共享存储器ATM交换机组播路由方法

提出了在Ｎ＊Ｎ共享存储ＡＴＭ交换机上增加一条高速总线的方法,使其专用于组播路由,构成Ｎ＊Ｎ＋１ＡＴＭ交换机。虽增加少许硬件,但在不增加存储器尺寸及苛求存储器速度条件下,保持了共享存储器ＡＴＭ交换吞吐率高、信元丢失率低、易于管理突发业务等特点,同时增添了共享总线ＡＴＭ交换 机易于实现组播路由的优点,软件仿真证实,该方法提高了系统的性能,尤其适用于混合业务流。     

弧型波导全光开关的优化设计

应用光束传输法对基于三阶非线性材料的弧型波导全光开关的开关特性进行了模拟,对两波导中心距、宽度及其不对称性等几何参数对开关特性的影响进行了分析,并对其进行了优化设计。结果表明,优化设计后的弧型波导全光开关具有较低的平均开关功率、数值化多次开关特性,有着弱光非线性全光开关的应用前景。     

Free-space optical relay for the interconnection of multimode fibers

We present results from a system that shows that multimode fibers can be used for both the input and the output of a free-space optical system. The system consists of plastic microlenses integrated with plastic optomechanical components that are suitable for low-cost fabrication and assembly. Such a system opens up opportunities to construct large repeaters and switches for multigigabit ethernet applications by integration with two-dimensional arrays of optoelectronic devices. We demonstrate a 2.5-Gbit/s transmission rate by using commercial vertical-cavity surface-emitting lasers coupled to 62.5-mum core fibers. We consider the design constraints and the capabilities of custom optical modules suitable for mass production.     

Implementation of a compact, four-stage, scalable optical interconnect for photonic backplane applications

We report on the implementation of a dense 512-beam free-space optical interconnect linking four optoelectronic VLSI chips at the backplane level. The system presented maximizes the positioning tolerances of the components by use of slow f-number (f/16) Gaussian beams and oversized apertures. A beam-clustering scheme whereby a 4 x 4 array of beams is transmitted by each minilens is used to provide a high channel density. A modular approach is used to decrease the number of degrees of freedom in the system and achieve passive alignment of the modules in the final integration phase. A design overview as well as assembly and experimental results are presented.     

Study the role of non-linear resonant cavities in photonic crystal-based decoder switches

In this paper, we are going to design and propose a novel structure for all optical decoder. The proposed structure is composed of optical power splitters and a four-port optical switch. The four-port optical switch simply is a non-linear optical demulitiplexer. For achieving non-linear behaviour for the demultiplexer, we will employ defect rods made of doped glass which has high Kerr coefficient. The final structure has three input ports and four output ports. Port E acts as enable port, which will be used activating or deactivating the total structure. A and B are the control ports, by which one can control when the structure is active, which port of the structure to be active. The optical intensity of the input ports required appropriate operation of the structure is about 20 W/μm². The maximum switching frequency of the proposed structure is 2 GHz. Reduced input optical intensity is the main characteristics of the present work. Numerical methods such as plane wave expansion and finite difference time domain were used for performing the required calculations.