Energy,economic and environmental benefits of using high-efficiency motors to replace standard motors for the Malaysian industries

Electric motors use major share (i.e. about 30–80% of total industrial energy consumption) of total industrial energy use around the world. Experiences from other countries show that government intervention in the form of regulations such as mandatory and voluntary approaches can save sizeable amount of energy along with the reduction in emissions associated with energy savings. This paper presents potential energy savings by introducing high-efficiency motors as a case study in Malaysian industrial sector. Emission reductions associated with the energy savings has been estimated and presented as well. It was also estimated that a cumulative amount of 1940 and 892 GWh of energy can be saved for 20 and 120 kW motors, respectively, in Malaysia relative to BAU over the next 10 years. Similarly, a cumulative amount of USD 100 million and USD 60 million can be saved as utility bills for the same motor categories. It has been found that the payback period of different capacities of motors are less than a year. Based on results, it was found that 1789 million kg of CO₂ emission can be avoided by replacing standard motors with high-efficiency motors.     

Energy conservation on Nova Scotia farms: Baseline energy data

Direct energy use is a small but essential component of the farm greenhouse gas (GHG) budget. Improvements in energy efficiency and renewable energy can help reduce farm operating costs, improve air quality and reduce GHG emission levels. Energy conservation is especially important in Nova Scotia (NS), Canada, where fossil fuels, particularly coal, remain the primary source of electrical generation. Responses from mail surveys were used to establish baseline data on a cross-section of NS farms with respect to direct energy costs and usage to demonstrate differences in farm type and size. A 32% (N=224) response rate was achieved. Based on this survey, the average energy bill for a NS farm in 2004 was $11,228, with most (61.7%) of their energy cost attributable to the purchase of petroleum products. Almost all farmers (96.4%) indicated that their energy cost was a primary concern. Farmers identified the operation of vehicles and mobile equipment, as well as lighting and heating as having the greatest energy requirements in their operations. Energy usage varied with farm type and size. NS farms consumed 1.2 petajoules of energy equivalent to 127 kilotonnes of CO₂ with 52.7% of emissions from electricity use in 2004.     

Energy and emission analysis for industrial motors in Malaysia

The industrial sector is the largest user of energy in Malaysia. Industrial motors account for a major segment of total industrial energy use. Since motors are the principle energy users, different energy savings strategies have been applied to reduce their energy consumption and associated emissions released into the atmosphere. These strategies include using highly efficient motors, variable speed drive (VSD), and capacitor banks to improve the power factor. It has been estimated that there can be a total energy savings of 1765, 2703 and 3605 MWh by utilizing energy-efficient motors for 50%, 75% and 100% loads, respectively. It was also found that for different motor loads, an estimated US$115,936 US$173,019 and US$230,693 can be saved in anticipated energy costs. Similarly, it is hypothesized that a significant amount of energy can be saved using VSD and capacitor banks to reduce speed and improve the power factor, thus cutting energy costs. Moreover, a substantial reduction in the amount of emissions can be effected together with the associated energy savings for different energy savings strategies. In addition, the payback period for different energy savings strategies has been found to be reasonable in some cases.     

Energy taxation and the double dividend effect in Taiwan's energy conservation policy—an empirical study using a computable general equilibrium model

Faced with pressure from greenhouse gas reductions and energy price hikes, the Taiwan government is in the process of developing an energy tax regime to reflect environmental external costs and effectively curb energy consumption, as well as mitigate CO₂ emissions through an adequate pricing system. This study utilizes a CGE model to simulate and analyze the economic impacts of the draft Energy Tax Bill and its complementary fiscal measures. Under the assumption of tax revenue neutrality, the use of energy tax revenue generated for the purpose of reducing income tax is the best choice with double dividend effects since it will effectively stimulate domestic consumption and investment, and, consequently, mitigate the negative impacts of the distortionary tax regime. The double dividend effect is less significant, however, when the supplementary measures being used are for government expenditure. Nevertheless, all supplementary measures have effectively reduced energy consumption, which means they have delivered at least the first dividend—in the sense of CO₂ emissions control. It has been verified in this study that having adequate public-finance policy measures is the key to realizing the double dividend effect.     

Energy conservation in traffic

This paper discusses the energy that is being wasted in the transport section in Amman due to three main factors: namely, the time delay at the major traffic light intersections, the warming up periods of vehicles, and the drag force acting on heavy vehicles. It was found that the fuel which is being used due to the first and second factors contribute 2.2 and 3.0% to the total annual fuel cost in Jordan. Finally, recommendations and suggestions are given to cut down the fuel consumption in Amman due to the above mentioned factors.     

Energy conservation and emission reduction policies for the electric power industry in China

Because of China's increasingly limited energy supplies and serious environmental pollution, much attention has been paid to conserving energy and reducing emissions to help the country's economy achieve sustainable development. As the electric power industry is the largest consumer of coal resources in China and also emits high levels of air pollutants each year, the Chinese government has enacted many technical and economic policies for energy conservation and emission reduction in the last few years. These policies are summarized in this paper, along with relevant laws and medium- and long-term plans, all of which address ideas such as adjusting the power generation mix, promoting demand-side management, introducing energy-efficient scheduling, and installing desulfurization units. The paper also assesses the results of these policies by analyzing several key indicators of energy consumption and emissions. The analysis shows that although some progress has been made in conserving energy and reducing emissions, substantial work is still required for China to catch up with developed countries. Some suggestions for future work are provided.     

Energy conservation in subway systems by controlled acceleration and deceleration

The 1975 electric bill for propulsion in the New York City subway system was close to 90 million dollars. This paper addresses the question of how a subway motorman should run his train in order to minimize this energy consumption. It is shown that using maximum acceleration followed at the appropriate time by coasting, and then braking at the maximum acceptable rate, gives a particularly low energy consumption for typical subway trains (although slightly different velocity profiles can be better under appropriate circumstances). This velocity profile is relatively easy to implement, and has now been proved effective in experimental tests. As a result of recommendations reported here, the New York City Transit Authority ran idealized tests of the profile, followed by recently completed tests in revenue service which demonstrated an 18.4 per cent decrease in energy consumption using a daily weighted increase of 4.25 per cent in trip time. This paper also evaluates the energy saved using an alternative method involving equipment modification for field shunting in the series mode.     

Communications on energy Household energy conservation

This study assesses the influence of attitudinal and socio-economic factors on household energy conservation actions. A household interview survey in Regina, Saskatchewan found that respondents perceive an energy problem, although no association with energy conservation actions was determined. Two attitudinal and five socio-economic variables influence household energy conservation. Energy and monetary savings are available to households through energy conservation. Public awareness of household energy conservation through the media can reinforce existing energy conservation actions and encourage new actions.     

Reducing greenhouse gas emissions by inducing energy conservation and distributed generation from elimination of electric utility customer charges

This paper quantifies the increased greenhouse gas emissions and negative effect on energy conservation (or “efficiency penalty”) due to electric rate structures that employ an unavoidable customer charge. First, the extent of customer charges was determined from a nationwide survey of US electric tariffs. To eliminate the customer charge nationally while maintaining a fixed sum for electric companies for a given amount of electricity, an increase of 7.12% in the residential electrical rate was found to be necessary. If enacted, this increase in the electric rate would result in a 6.4% reduction in overall electricity consumption, conserving 73 billion kW h, eliminating 44.3 million metric tons of carbon dioxide, and saving the entire US residential sector over $8 billion per year. As shown here, these reductions would come from increased avoidable costs, thus leveraging an increased rate of return on investments in energy efficiency, energy conservation behavior, distributed energy generation, and fuel choices. Finally, limitations of this study and analysis are discussed and conclusions are drawn for proposed energy policy changes.     

Energy conservation policies in Jordan

Jordan imports almost all the energy required for its social and economic development. During the period 1974–1984, energy consumption grew at an average rate of about 14%/year, due mainly to growth in the national economy; but exacerbated by inefficient use of energy. To alleviate the burden of the energy bill on the economy, the Ministry of Energy has adopted a policy aimed at securing sufficient energy supplies at minimum cost to the economy. This policy has focused on improving the efficiency of energy-use and encouraging energy conservation in order to reduce the effect of oil imports on foreign reserves, reduce the impact of emissions of toxic gases on the environment, and the cost of additional investment in production facilities. The energy conservation programme was put into application in early 1985. The energy income elasticity during the period 1985–1988 has dropped from (1.4) to (1), which indicates a substantial improvement in overall energy utilization.     

Potential problems and limitations of energy conservation and energy efficiency

We discuss that whilst energy conservation and energy efficiency both ultimately have the same goal they attempt to achieve this via very different approaches. We then discuss how both options face significant barriers to ultimately successfully reduce electricity consumption.     

Net benefits of energy conservation in housing

The computer program FREDOCAN allows one to assess the impact of energy conservation policies on the household sector due to thermal insulation measures and to various options concerning domestic heating plants. the insulation policy must be specified, giving in input to the program the housing stock and the fraction of dwellings to be insulated as a function of time. the different insulation measures are evaluated both separately and in a combined way. the evaluations are performed both from financial and energy analysis point of view, determining the internal rates of return of the investments, financial and energy pay-back times under static and dynamic conditions. The space heat savings evaluated in the first part of the program allow one to calculate, in the second part, additional savings due to the reduction of the investments required for the heating plants. It is also possible to assess the variation with time of the heating plant mix, taking into account of improved efficiencies and different energy sources. A test case for the North of Italy is described. It shows that a very simple insulation of both existing and new houses limits the growth of energy demand to only 18 per cent above the 1977 consumption levels, although the combined effects of new constructions and of an extensive upgrading of heating systems would require a 75 per cent energy demand increase.     

Implementing China’s national energy conservation policies at state-owned electric power generation plants

China’s 11th Five-Year Guideline identified energy conservation as one of the country’s fundamental policies and established a mandatory target: 20% reduction in national average energy intensity by 2010. Despite the various policies, laws, and administrative reforms to support energy conservation, China fell behind schedule for meeting its conservation targets in 2006 and 2007. Using a combination of available literature and an interview-based case study, this paper examines the implementation of energy conservation and investigates impediments to achieving China’s conservation goal in the electric power generation sector. Three key impediments are detailed: (1) municipal governments’ incentives to overlook conservation-related central directives primarily because of budget pressures linked to financial decentralization, (2) procedural obstacles in the form of time required to obtain project approvals for high-efficiency power generation units, and (3) financial obstacles making it difficult for power generation enterprises to raise capital for energy conservation projects. An interview-based case study of a state-owned coal-fired electric power generation company demonstrates the influence of the aforementioned obstacles. While procedural obstacles are notable, they can be managed. However, electricity pricing reforms and/or stronger subsidy programs will be needed to address the financial obstacles facing Chinese power generation companies.     

Energy conservation and payback periods of natural circulation type solar water heaters

Energy savings in relation to different fuels, namely firewood, coal, kerosene, LPG and electricity have been calculated for a pressurized natural circulation type solar water heater with blackboard paint and a selective surface on the absorber. The payback periods have been computed by considering 10% compound annual interest, 5% annual maintenance cost and 5% inflation per year in maintenance cost and fuel prices. The cash flow has also been worked out for both solar water heaters. The cash flow is more for a solar water heater with a selective surface. The payback periods are 2.08–8.67 years for a solar water heater with a selective surface and 2.13–8.96 years for a solar water heater with blackboard paint. The estimated life of a heater is about 15 years. This shows that use of a solar water heater for heating water is very economical.     

Consumer energy conservation policy An analytical approach

To capture the potential energy savings available in the consumer sector an analytical approach to conservation policy is proposed. A policy framework is described and the key constructs including a payoff matrix analysis and a consumer impact analysis are discussed. Implications derived from the considerable amount of prior consumer research are provided to illustrate the effect on the design and implementation of future programmes. The result of this analytical approach to conservation policy — economic stability and economic security — are goals well worth pursuing.     

Impact of organizational factors on energy conservation measures

The authors discuss the design and implementation of social regulation of energy conservation based on some empirical studies of various kinds of public organizations and private business firms in Sweden. A major point is that the result of regulatory measures may be affected by organizational characteristics and particularly by the general goals of the regulated organizations. The impact of various administrative, economic and informative measures of energy conservation in existing buildings in Sweden are discussed against this background and relevant questions of public policy are outlined.     

Energy conservation in the industrial sector of developing countries

This paper begins by examining the most energy-intensive industries and methods by which fuel efficiency can be improved. Next the author analyses the economics of energy conservation using specific case studies drawn from India. It is shown that investing in energy efficiency is more economical Btu per Btu than investing in the enhancement of domestic energy resources. The author also assesses changes in the economics of conservation for private firms when there are government incentives. Finally government policies that can overcome economic and non-economic disincentives for investing in energy conservation are examined.     

Energy conservation : An elasticity of substitution approach

Long-term forecasts of demand, used in energy planning, are based on assumptions alleged to be reasonable at the time of projections. The political debate can then focus on whether these assumptions are indeed reasonable. Common considers two sets of projections, and estimates the implicit price and income elasticities, thereby translating assumptions entailed in two different reports into concepts which are directly comparable. It is argued here that this approach need be taken a step further and elasticities of substitution between energy and other inputs should be calculated. Possibilities of energy conservation could then be taken into account.     

Energy conservation through recycling

A critical review of the literature is used to suggest best estimates of the energy savings due to recycling one tonne of a number of materials. the use of these estimates is demonstrated by a number of illustrative applications. Substantial energy savings may be made by recycling most metals or paper. the savings from reclaiming glass cullet are marginal, although there is considerable potential for energy conservation through the substitution of returnable for non-returnable bottles. the recycling of materials already saves some 5 per cent of the U.K. total energy requirement, and this contribution could potentially be doubled. the recovery of fuel products and/or materials from solid waste is also shown to be an attractive and efficient energy source.     

Personality traits and energy conservation

As a cost-effective solution to energy conservation, behavior based method focuses on changing people's behavior through normative feedback for energy efficiency. While the application of behavior-based method is promising, the challenge exists to achieve efficiently sustainable behavioral change. Based on multi-period observation of energy behavior at the Joint Base Andrews in Maryland, this paper presents a model-based approach aimed to improve the nationally popular and deep-seated benchmark setting strategy for normative feedback used in home energy reports. The improved approach has its merits of countering the undesirable boomerang effect and enhancing the effectiveness of normative feedback targeting different personalities. By introducing a modified opinion dynamics model, this paper simulates the process of energy behavior change and therefore identifies the driver and elementary rules of behavioral change. In particular, the paper defines various behavioral zones in accordance with people's personality and proposes a new customized energy reporting mechanism that maps normative benchmark to personality trait. The new energy reporting policy has strong industrial implication for promoting behavior-based method towards a sustained energy conservation movement.