Eu2+-doped Sr5(PO4)3Br blue-emitting phosphor with high color purity for near-UV-pumped white light-emitting diodes

Eu²⁺-doped bromophosphateapatite Sr₅(PO₄)₃Br phosphors were synthesized by the conventional high-temperature solid-state reaction. The crystal structure and luminescence properties of the phosphors, as well as their thermal stability and CIE chromaticity coordinates were systematically investigated. Photoluminescence spectra of Sr₅(PO₄)₃Br:Eu²⁺ exhibit a single blue emission at 450 nm under the excitation of 345 nm, which is ascribed to the 4f–5d transition of Eu²⁺. The phosphor shows very good thermal stability. The CIE color coordinates are very close to those of BaMgAl₁₀O₁₇:Eu²⁺ (BAM). All the properties indicate that the blue-emitting Sr₅(PO₄)₃Br:Eu²⁺ phosphor has potential application in white LEDs.     

Intense blue-emitting Ca₂PO₄Cl:Eu²⁺ phosphor for near-ultraviolet converting white light-emitting diodes

A blue phosphor Ca2PO4Cl:Eu2+(CAP:Eu2+) was synthesized by solid state reaction.The Ca2PO4Cl:Eu2+ exhibited high quantum efficiency and excellent thermal stability.The luminescent intensity of Ca2PO4Cl:Eu2+ was found to be 128% under excitation at 380 nm,149% under 400 nm,and 247% under 420 nm as high as that of BaMgAl10O17:Eu2+.The optimal doping concentration was observed to 11 mol.% of CAP:Eu2+.The energy transfer between Eu2+ ions in CAP were occurred via electric multipolar interaction,and the critical transfer distance was estimated to be 1.26 nm.A mixture of blue-emitting Ca2PO4Cl:Eu2+,green-emitting(Ba,Sr)2SiO4:Eu2+ and red-emitting CaAlSiN3:Eu2+ phosphors were selected in conjunction with 400 nm chip to fabricate white LED devices.The average color-rendering index Ra and correlated color temperature(Tc) of the white LEDs were found to be 93.4 and 4590 K,respectively.The results indicated that it was a promising candidate as a blue-emitting phosphor for the near-UV white light-emitting diodes.     

Multi-site occupancies and luminescence properties of cyan-emitting Ca9-xNaGd2/3(PO4)7:Eu2+phosphors for white light-emitting diodes

Cyan-emitting Ca₉NaGd_2/3(PO₄)₇:Eu²⁺phosphors were synthesized via high temperature solid-state route.X-ray powder diffraction(XRD)and scanning electron microscopy(SEM)were used to verify the phase and morphology of the Ca₉NaGd_2/3(PO₄)₇:Eu²⁺(CNGP:Eu²⁺)phosphors.The as-obtained phosphor exhibits a broad excitation band of 250-420 nm,which is near the ultraviolet region.An intense asymmetric cyan emission at 496 nm corresponds to the 5 d-4 f transition of Eu²⁺.The multiplesite luminescent properties of Eu²⁺ions in CNGP benefit from versatile structure ofβ-Ca3(PO4)2 compounds.The effective energy transfer distance is 5.46 nm(through the spectral overlap calculation),validating that the resonant energy migration type is via dipole-dipole interaction mechanism.Compared to the initial one at room temperature,the luminescent intensity of CNGP:Eu²⁺phosphor can maintain 77%as it is heated up to 420 K.A white light-emitting diode(WLED)with excellent luminesce nt properties was successfully fabricated.Moreover,the CIE chromaticity coordinates of fabricated WLED driven by changing current just change slightly.     

Luminescence properties of red phosphors Ca_（10）Li（PO_4）_7：Eu~（3＋）

A series of red phosphors Ca10Li (PO4)7:Eu3+ were synthesized by high temperature solid-state reaction method. Their luminescence properties were characterized by means of photoluminescence excitation and emission spectra,CIE chromaticity and quantum efficiency. Results indicated that the phosphors could be effectively excited by the near ultraviolet (NUV) light (393 nm). The main emission peaks of the phosphor were ascribed to the transition 5D0-7F2 (613 and 617 nm) of Eu3+ ion when samples were excited by...     

A single-phase full-color phosphor Sr2Ca2La(PO4)3O:Eu2+,Tb3+,Mn2+: Photoluminescence and energy transfer

A single-phase full-color emitting phosphor Sr₂Ca₂La(PO₄)₃O:Eu²⁺,Tb³⁺,Mn²⁺ was synthesized by the high temperature solid-state method. The phase formation, luminescence properties, thermal stability, and energy transfer from Eu²⁺ to Tb³⁺ and Eu²⁺ to Mn²⁺ in Sr₂Ca₂La(PO₄)₃O were investigated in details. Tunable emission color from blue to blueish green or orange can be observed under 365 nm near-ultraviolet excitation based on the energy transfer from Eu²⁺ to Tb³⁺ or Mn²⁺ ions by varying the ratio of Eu²⁺/Tb³⁺ or Eu²⁺/Mn²⁺ ions. White light was obtained with chromaticity coordinates of (0.3558, 0.3500) in the Sr₂Ca₂La(PO₄)₃O:0.04Eu²⁺,0.08Tb³⁺,0.40Mn²⁺ phosphor, suggesting their potential applications in white light emitting diodes.     

Single-phase white-emitting and tunable color phosphor Na3Sc2(PO4)3:Eu2+,Dy3+: Synthesis,luminescence and energy transfer

A series of Eu²⁺/Dy³⁺ single doped and co-doped Na₃Sc₂(PO₄)₃ phosphors were synthesized by the high-temperature solid-state method, and their phase, morphology, and luminescence properties were characterized. Under the excitation of 370 nm, the Na₃Sc₂(PO₄)₃:Eu²⁺,Dy³⁺ phosphor can emit white light whose spectrum is composed of a broad emission band centered at 460 nm and the other three peaks at 483, 577, and 672 nm, respectively. There is energy transfer from Eu²⁺ to Dy³⁺ ion in Na₃Sc₂(PO₄)₃:Eu²⁺,Dy³⁺ phosphor due to the good overlap between the emission spectrum of Na₃Sc₂(PO₄)₃:Eu²⁺ and the excitation spectrum of Na₃Sc₂(PO₄)₃:Dy³⁺, which is further confirmed by the fluorescence lifetime decrease of Eu²⁺ ion with the increase of Dy³⁺ concentration. The process of energy transfer is via dipole–quadruple interaction which is confirmed by applying Dexter's theory. By increasing the Dy³⁺ concentration, the color coordinates of the Na₃Sc₂(PO₄)₃:0.01Eu²⁺,xDy³⁺ phosphors can be adjusted from blue to white, and then to yellow. The optimized concentration of Dy³⁺ ions is 4.0 mol%, beyond which the concentration quenching will take place. The Na₃Sc₂(PO₄)₃:Eu²⁺,Dy³⁺ phosphor shows fairly good resistance to thermal quenching behavior, of which the emission intensity at 423 K can maintain 90.3% of the initial value (298 K). These results suggest that the Na₃Sc₂(PO₄)₃:0.01Eu²⁺,xDy³⁺ phosphors have potential applications as the color-tunable or a single-phase white emitting phosphor in white LEDs.     

Phase structure and temperature dependent luminescence properties of Sr2LiSiO4F: Eu2+ and Sr2MgSi2O7: Eu2+ phosphors

Green-emitting Sr2LiSiO4F:Eu2+ and blue-emitting Sr2MgSi2O7:Eu2+ phosphors were synthesized by the conventional high temperature solid-state route,respectively.Their structures and photoluminescenee properties were comparatively investigated.It was found that the mixture phases of Sr2MgSi2O7 and SrF2 were obtained when a part of Sr2+ in Sr2LiSiO4F was replaced by some amount of Mg2+ in order to design the possible SrMgLiSiO4F:Eu2+ phosphor.Based on the photoluminescence analysis,Sr2LiSiO4F:Eu2+ phosphor exhibited a green broad emission band of main peak at 513 nm under the excitation of 365 nm,while the Sr2MgSi2O7:Eu2+ and SrMgLiSiO4F:Eu2+ phosphor showed blue emission centered at 467 nm.The temperature dependent photoluminescence properties and room temperature decay time for the three kinds of phosphors were also discussed in this paper.     

Samarium doped apatite-type orange-red emitting phosphor Ca_5(PO_4)_2SiO_4 with satisfactory thermal properties for n-UV w-LEDs

A novel single-phase Sm~(3+) activated Ca_5(PO_4)_2SiO_4 phosphor was successfully fabricated via a conventional solid-state method, which can be e fficie ntly excited by near ultraviolet(n-UV) light-emitting chips.The crystal structure and luminescence properties were characterized and analyzed systematically by using relevant instruments. The Ca_5(PO_4)_2SiO_4:Sm~(3+) phosphor shows an orange-red emission peaking at600 nm under the excitation of 403 nm and the optimal doping concentration of Sm~(3+) is determined to be 0.08, The critical distance of Ca_5(PO_4)_2SiO_4:0.08 Sm~(3+) is calculated to be 1.849 nm and concentration quenching mechanism of the Sm~(3+) in Ca_5(PO_4)_2SiO_4 host is ascribed to energy transfer between nearestneighbor activators. The decay time of Ca_5(PO_4)_2 SiO_4: 0,08 Sm~(3+) is determined to be 1.1957 ms. In addition, the effect of temperature on the emission intensity was also studied, 72.4% of the initial intensity is still preserved at 250 ℃, better thermal stability compared to commercial phosphor YAG:Ce~(3+) indicates that Ca_5(PO_4)_2SiO_4:0.08 Sm3+ has excellent thermal stability and active energy is deduced to be 0.130 eV.All the results demonstrate that orange-red emitting Ca_5(PO_4)_2SiO_4:0.08 Sm~(3+) phosphor exhibits good luminescent properties. Owing to the excellent thermal quenching luminescence property,Ca_5(PO4)_2SiO_4:0.08 Sm~(3+) phosphor can be applied in n-UV white light emitting diodes and serve as the warm part of white light.     

A potential red-emitting phosphor Ca_2YTaO_6:Eu~(3+):Luminescence properties,thermal stability and applications for white LEDs

A novel red-emitting phosphor tantalate Ca_2 YTaO_6:Eu~(3+)was synthesized by a solid-state reaction.The purity and surface morphology of the phosphors were characterized.The Ca_2 YTaO_6:Eu~(3+)phosphors show a sharp emission peak at 612 nm under near-ultraviolet(n-UV) at 395 nm because of the ~5 D_0→~7 F_2 transition of Eu3+.The optimal Eu3+doping concentration in Ca2 YTaO_6 is 40 mol% and the critical energy-transfer distance of Eu3+ions was calculated to be 0.9 nm.The emission spectra of Ca_2 YTaO_6:Eu3+from 300 to 480 K were investigated.The thermal-quenching temperature(T_(0.5)) of Ca_2 YTaO_6:Eu~(3+)is above 480 K.The color purity of Ca_2 YTaO_6:40 mol%Eu3+is as high as 99.8%.The luminescence lifetime of Ca_2 YTaO_6:40 mol%Eu~(3+)was also discussed.The high color purity and high thermal stability of Eu~(3+)-doped Ca2 YTaO6 phosphors contribute to its application value in white lightemitting diodes(w-LEDs).     

Synthesis and luminescence properties of a novel phosphor Ca2–x/2Si1–xPxO4:Eu2+for near UV-excited white-light-emitting diodes

A novel green-emitting phosphor,Eu2+-doped Ca2-x/2 Si1-x Px O4(0.25≤x≤0.30),was prepared through a conventional solidstate reaction.X-ray diffraction(XRD),photoluminescence(PL) and decay studies were employed to characterize the sample,which was assigned to P63mc space group in the hexagonal system.The effect of P-doping on the α-Ca2 SiO4 was studied and P2 O5 broken down by the raw material of(NH4)2 HPO4 played an important role in stabilizing α-Ca2 SiO4 which can only be stable at high temperature.The XRD patterns of the Ca2-x/2 Si1-x Px O4 host were found pure and optimized when the mole fraction of P2 O5 was 14.5%.The diffuse reflectance spectra of the Ca1.855 Si0.71 P0.29 O4 and Ca1.845 Si0.71 P0.29 O4 :0.01Eu2+covered the spectral region of 230-400 nm,implying that the phosphor was suitable for UV or near-UV LED excitation.The phosphor could be effectively excited in the near UV region with the maximum at 372 nm.The emission spectrum of the Ca1.845 Si0.71 P0.29 O4 :0.01Eu2+phosphor showed an asymmetrical single intensive band centered at 513 nm,which corresponded to the 4f65d1→4f7transition of Eu2+.Eu2+ions might occupy two types of Ca2+sites in the Ca1.855 Si0.71 P0.29 O4 lattice and form two corresponding emission centers,which led to the asymmetrical emission of Eu2+in Ca1.855 Si0.71 P0.29 O4.The effects of Eu2+-doped concentration in Ca1.855-x Si0.71 P0.29 O4 :xEu2+on the PL were also discussed,the optimum doping concentration of Eu2+was 1 mol.% and the critical distance of the energy transfer was also calculated by the concentration-quenching method.The non-radiative energy transfer between Eu2+seemed to be caused by the multipole-multipole interaction.The fluorescence lifetime of Eu2+was found to be 0.55711 μs.The results suggested that these phosphors might be promising candidates used for near UV light excited white LEDs.     

Preparation,structure, luminescence properties of europium doped zinc spinel structure green-emitting phosphor ZnAl2O4:Eu2+

The Zn_(1-x)Al_2 O_4:xEu~(2+) phosphor powders were synthesized by the solid-state reaction method.The synthesis temperature for ZnAl_2 O_4 was optimized,whereas the phase structure,TEM images,photoluminescence(PL) properties,the concentration quenching mechanism,the fluorescence decay curves,as well as the CIE chromaticity coordinates of the samples were investigated in details.Under the excitation at 379 nm,the phosphor exhibits an asymmetric broad-band green emission with a peak at 532 nm,which is ascribed to the 5 d-4 f transition of Eu2+.When the doping concentration of Eu2+ ions is 0.01,the luminescence intensity of the sample reaches the maximum value.It is further proved that the exchange interaction results in the concentration quenching of Eu2+ in the Zn_(1-x)Al_2 O_4:xEu~(2+) phosphor powders.The thermal quenching property of ZnAl_2 O_4:Eu~(2+)phosphor was investigated and the quantum efficiency(QE) values of the selected Zn_(0.99)Al_2 O_4:0.01 Eu~(2+) phosphor was measured and determined as 54.85%.The lifetime of the optimized sample Zn_(0.99)Al_2 O_4:0.01 Eu~(2+) is 3.0852 μs and the CIE coordinate of the sample was calculated as(0.3323,0.5538) with high-color-purity green emission.All properties indicate that the green-emitting ZnAl_2 O_4:Eu~(2+) phosphor powder has potential application in white LEDs.     

A green-yellow emitting β-SreSiO4：Eu^2＋ phosphor for near ultraviolet chip white-light-emitting diode

Sr2SiO4：xEu^2＋ phosphors were synthesized through the solid-state reaction technique. The crystal phase of Sr2SiO4：xEu^2＋ phosphor manipulated by Eu^2＋ concentration was studied. The phase transited from β to α＇ in Sr2SiO4：xEu^2＋ phosphor with increasing europium concentration. The single β phase was formed as x≤005 and changed α＇ phase when x〉0.01. The emission spectrum of the β-Sr2SiO4：Eu^2＋ phosphor consisted of a green-yellow broadband peaking at around 540 nm and a blue band at 470 nm under near ultraviolet excitation. The white LEDs by combining near ultraviolet chips with β-Sr2SiO4：Eu^2＋ phosphors were fabricated. The luminous efficiency （15.7lm/W） was higher than α＇-Sr2SiO4：Eu^2＋ phosphor white LED.     

Blue-emitting Sr_(1-x)Ca_xLu_2O_4:Ce~(3+) phosphors for high CRI white LEDs

A broadband blue-emitting Sr_(1-x)Ca_xLu_2 O_4:Ce~(3+)(x=0-0.2) phospho rs were synthesized,which can be used for near-UV pumped white light-emitting diodes(w-LEDs).The crystal structures,photoluminescence pro perties,external quantum efficiency,the rmal stability and application perfo rmance of Sr_(1-x)Ca_xLu_2 O_4:Ce~(3+),by partially substituting Sr~(2+) with Ca~(2+)(x=0-0.2),were studied by various analytical techniques.When the Ca/Sr ratio of Sr_(1-x)Ca_xLu_2 O_4:Ce~(3+) gradually increases,the emission peak of Sr_(1-x)Ca_xLu_2 O_4:Ce~(3+) red-shiftes from 459 to 465 nm,corrected external quantum efficiency increases from 31.8% to 42.9%,and the thermal stability is also improved.The mechanism of the changes of the photoluminescence emission and excitation spectra,external quantum efficiency and thermal stability properties was also investigated in detail.In addition,a w-LED was fabricated by using SrLu_2 O_4:Ce~(3+)(blue),β-sialon:Eu~(2+)(green) and(Sr,Ca)AlSiN_3:Eu~(2+)(red) phosphors combined with a 405 nm near-UV LED chip,and its color rendering index(CRI) reaches 96.0.When Sr_(0.8)Ca_(0.2)Lu_2 O_4:Ce~(3+)is applied as blue phosphor to substitute SrLu_2 O_4:Ce~(3+),the obtained w-LED devices have high luminous efficiency,and CRI greater than 95.0.These re sults show that the Sr_(1-x)Ca_xLu_2 O_4:Ce~(3+) can be potential blue phosphors for n-UV pumped high CRI w-LEDs application.     

Synthesis,structure and optical properties of novel thermally robust Dy~(3+)-doped Ca_9Sc(PO_4)_7 phosphors for NUV-excited white LEDs

The powder samples of Ca₉Sc(PO₄)₇:xDy^{^(3+})white emitting phosphors were prepared via a solid state reaction technique.The Ca₉Sc(PO₄)₇:Dy³⁺samples were researched by using the GSAS Rietveld refinement and X-ray diffraction(XRD) methods,and SEM images and elemental maps were recorded.Under 350 nm excitatio n,the emission spectra of Ca₉Sc(PO₄)₇:xDy³⁺samples have two obvious peaks and one weak peak at 484,572 and660 nm,corresponding to the characteristic electron transitions of(⁴F_9/2→ ⁶H_15/2,blue),(⁴F_9/2→ ⁶H_13/2,yellow) and(⁴F_9/2→ 6 H11/2,red),respectively.The concentration quenching effect,decay lifetime and thermal quenching of the as-synthesized Ca₉Sc(PO₄)₇:Dy³⁺samples were researched systematically.The Ca₉Sc(PO₄)₇:0.02 Dy³⁺phosphor possesses a good thermal stability,of which the emission intensity at 423 K can maintain 79% of the initial value(273 K).In addition,through the study of the chro maticity coordinates of the Ca₉Sc(PO₄)₇:0.02 Dy³⁺phosphor,it is found that it is located in the white region,and the Commission Internationalede L’Eclairage(CIE) chromaticity coordinates are(0.339,0.389),The above results show that Ca₉Sc(PO₄)₇:xDy³⁺phosphors can be excellent candidate material for applications in NUV-excited white LEDs.     

Synthesis and optical characterization of Eu2+,Tb3+-codoped Sr3Y(PO4)3 green phosphors

A series of Eu~(2+),Tb~(3+)-codoped Sr_3 Y(PO_4)_3(SYP) green phosphors were synthesized by hightemperature solid-state reaction. Several techniques, such as X-ray diffraction, UV-vis spectrum,and photoluminescence spectrum, were used to investigate the obtained phosphors. The present study investigates in detail photoluminescence excitation and emission properties, energy transfer between the two dopants, and effects of doping ions on optical band gap. SYP:0.05 Eu2+ phosphor shows an intense and broad excitation band ranging from 220 to 400 nm and exhibits a bright green emission band with CIE chromaticity coordinates(0.189, 0.359) under 350 nm excitation. Green emission of SYP:0.03 Tb3+ is intensified by codoping with Eu~(2+), and energy transfer mechanism between them is demonstrated to be a dipole-dipole interaction. Upon 350 nm excitation, SYP:Eu~(2+),Tb~(3+) phosphors exhibits two dominating bands peaking at 466 and 545 nm, which are assigned to 4 f~65 d~1→4 f~7 transition of Eu~(2+) ions and ~5 D_4→~7 F_5 transition of Tb~(3+) ions, respectively. Optimal doping concentrations of Eu~(2+) and Tb~(3+) in the SYP host are 5 mol% and 15 mol%, respectively. Results indicate that SYP:Eu~(2+),Tb~(3+) phosphors are potentially used as green-emitting phosphors for white light-emitting diodes.     

Site occupation and energy transfer in full color emitting phosphor Ba2Ca(BO3)2:Ce3+(K+),Eu2+,Mn2+

White light-emitting diodes (WLEDs) fabricated by single-phase full color emitting phosphor are an emerging solution for health lighting. The crystallographic site occupation of activators in a proper host lattice is crucial for sophisticated design of such phosphor. Here, we report a high quality white light-emitting phosphor Ba₂Ca(BO₃)₂:Ce³⁺(K⁺),Eu²⁺,Mn²⁺ with spectral distribution covering whole visible region. Blue light emission originates from Ce³⁺ ions occupying preferentially Ba²⁺ site by controlling synthesis conditions. Green and red lights are obtained from Eu²⁺ occupying Ba²⁺ (and Ca²⁺) site and Mn²⁺ occupying Ca²⁺ site, respectively. In this triple-doped phosphor, strong red emission with a low concentration of Mn²⁺ is realized by the efficient energy transfer from Ce³⁺ and Eu²⁺ to Mn²⁺. Furthermore, high quality white light is accomplished by properly tuning the relative doping amount of Ce³⁺(K⁺)/Eu²⁺/Mn²⁺ based on efficient simultaneous energy transfer. The results indicate that Ba₂Ca(BO₃)₂:Ce³⁺(K⁺),Eu²⁺,Mn²⁺ is a promising white light-emitting phosphor in WLEDs application.     

A new oxyapatite red phosphor Eu3+-doped Ca3Y7(BO4)(SiO4)5O: Synthesis,structure and luminescence properties

A series of new oxyapatite red phosphors Ca₃Y₇(BO₄)(SiO₄)₅O doped with different concentrations of Eu³⁺ were successfully synthesized by high temperature solid state method. The X-ray diffraction (XRD) Rietveld refinement results show that the structure of the phosphor belongs to space group P6₃/m and Eu³⁺ ion replaces Y³⁺ ion. The emission spectrum consists of the characteristic emission peaks corresponding to Eu³⁺ under the excitation of 274 nm and the dominant emission peak is at 614 nm (⁵D₀→⁷F₂ of Eu³⁺). The concentration quenching effect occurs and the optimized Eu³⁺ concentration is 4.0 mol%. The energy level diagram for luminous mechanism is also given and the non-radiative energy transfer mechanism between Eu³⁺ is mainly exchange interaction. The CIE coordinate is close to the ideal red light and the color purity is higher than 99.79%. Moreover, the phosphor exhibits moderate thermal stability because the photoluminescence intensity at 423 K is still maintained at higher than 78.97% of that at room temperature. The internal quantum efficiency of Ca₃Y₇(BO₄)(SiO₄)₅O:4.0 mol%Eu³⁺ phosphor is 58.2%. A red light emitting diode (LED) device based on it can emit bright red light. The CCT values of the device are basically unchanged when driven by various bias current. The results show that Ca₃Y₇(BO₄)(SiO₄)₅O:Eu³⁺ is a new type of oxyapatite red fluorescent material with good comprehensive performances.     

Photoluminescent properties of SreSiO4：Eu^3＋ and Sr2SiO4：Eu^2＋ phosphors prepared by solid-state reaction method

Eu²⁺ and (or) Eu³⁺ doped Sr₂SiO₄ phosphors particles were synthesized by a conventional solid-state reaction technique, and their structural and optical properties were investigated. The X-ray diffraction (XRD) results showed that the obtained phosphors were composed of orthorhombic α'-Sr₂SiO₄ and monoclinic β-Sr₂SiO₄ phase. When excited under 256 nm, Sr₂SiO₄:Eu³⁺ phosphors showed intense emission in the red region. Sr₂SiO₄:Eu³⁺ phosphors exhibited white emissions (x=0.30, y=0.40, T_C=6500 K) ranging from 425 to 650 nm when it was excited by near-ultraviolet (near-UV) light, indicating that Sr₂SiO₄:Eu²⁺ was a good light-conversion phosphor candidate for near-UV chip.     

Eu2＋ and Dy3＋ codoped （Ca,Sr）7（SiO3）6Cl2 highly efficient yellow phosphor

Eu2+ and Dy3+ codoped(Ca,Sr)7(SiO3)6Cl2 yellow phosphors were successfully synthesized by self-flux method. The structure, morphology and photoluminescence properties were investigated by X-ray diffraction(XRD), scanning electron microscopy(SEM) and photoluminescence spectra. The as-prepared phosphor showed a broad emission spectrum centered at 550 nm for Eu2+single-doped phosphor, while located at 548–544 nm for the Eu2+, Dy3+ codoped samples under excitation at 380 nm light. The emission intensity was greatly improved when Dy3+ was doped into the(Ca,Sr)7(SiO3)6Cl2:Eu2+ system. The composition-optimized sample with 3 mol.% of Dy3+ and constant 10 mol.% of Eu2+ exhibited a 220% PL enhancement compared to the phosphor with 10 mol.% Eu2+ single-doped. Meanwhile, it was found that the quantum efficiency of phosphor namely(Ca,Sr)7(SiO3)6Cl2:3 mol.% Dy3+, 10 mol.% Eu2+ could get up to 24.6%. The synthesized yellow-emitting(Ca,Sr)7(SiO3)6Cl2:Dy3+,Eu2+ is a promising candidate as high-efficiency yellow phosphor for NUV-excited white LEDs.     

Fabrication and luminescent properties of red phosphor M3BO6:Eu3+(M=La,Y)

A series of red phosphors M₃BO₆:Eu³⁺ (M=La, Y) were synthesized at 1150 °C by conventional solid state reaction method and their luminescent properties were investigated. Structural characterization of the luminescent materials was carried out with X-ray powder diffraction (XRD) analysis. Photoluminescence measurements indicated that the La₃BO₆:Eu³⁺ phosphor exhibited bright red emission centered at about 612 nm 626 nm under UV excited. La₃BO₆:Eu³⁺ phosphor had better luminescent intensity than Y₃BO₆:Eu³⁺ phosphors under the same excitation and measuring conditions. It was shown that the 0.08 mol.% Eu³⁺ ions in La₃BO₆:Eu³⁺ phosphors was optimal. The color parameter indicated that La₃BO₆:Eu³⁺ phosphor was a preferable red phosphor for white LED.