Fabrication and structure properties of GaN nanowires by ammoniating Ga2O3 films

The GaN nanowires were successfully synthesized on Si(111) substrates by ammoniating the Ga₂O₃/ZnO films at 900 °C. The structure and morphology of the as-prepared GaN nanowires were studied by X-ray diffraction (XRD), Fourier transform infrared spectrum (FTIR), scanning electron microscopy (SEM) and field-emission transmission electron microscopy (FETEM). The results show that the single-crystal GaN nanowires have a hexagonal wurtzite structure with lengths of about several micrometers and diameters ranging from 30 nm to 120 nm, which are conducive to the application of nanodevices. Finally, the growth mechanism is also briefly discussed.     

Growth and properties of vertically well-aligned GaN nanowires by thermal chemical vapor deposition process

The vertically well-aligned GaN nanowires on c-Al₂O₃ substrates were grown via a vapor-liquid-solid mechanism. X-ray diffraction indicated the GaN nanowires to have epitaxial and homogeneous in-plan alignment with the c-Al₂O₃ substrates and a strong preferred orientation along the c-axis. The GaN nanowires had a single-crystalline hexagonal structure and c-axis orientation, as confirmed by high resolution transmission electron microscopy.     

Fabrication of needle-shaped GaN nanowires by ammoniating Ga2O3 films on MgO layers deposited on Si (111) substrates

Needle-shaped GaN nanowires have been synthesized on Si (111) substrate through ammoniating Ga₂O₃/MgO films under flowing ammonia atmosphere at the temperature of 950 °C. The as-synthesized GaN nanowires were characterized by X-ray diffraction (XRD), Fourier transformed infrared (FTIR) spectroscopy, scanning electron microscope (SEM) and high-resolution transmission electron microscopy (HRTEM). The results demonstrate that these nanowires are hexagonal GaN and possess a smooth surface with an average diameter about 200 nm and a length ranging from 5 μm to 15 μm. In addition, the diameters of these nanowires diminish gradually. The growth mechanism of crystalline GaN nanowires is discussed briefly.     

Gallium nitride nanowires doped with magnesium

GaN nanowires doped with Mg have been synthesized on Si (111) substrate through ammoniating Ga₂O₃ films doped with Mg under flowing ammonia atmosphere. The Mg-doped GaN nanowires were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), high-resolution transmission electron microscopy (HRTEM) and photoluminescence (PL). The results demonstrate that the nanowires were single crystalline with hexagonal wurzite structure. The diameters of the nanowires ranged 20-30 nm and the lengths were about hundreds of micrometers. The intense PL peak at 359 nm showed a blueshift from the bulk band gap emission, attributed to Burstein-Moss effect. The growth mechanism of the crystalline GaN nanowires is discussed briefly.     

Synthesis of GaN nanowires through Ga2O3 films' reaction with ammonia

GaN nanowires were synthesized by ammoniating Ga₂O₃ films on Ti layers deposited on Si (111) substrates at 950 °C. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transformed infrared spectroscopy (FTIR) and high-resolution transmission electron microscopy (HRTEM). The XRD, FTIR and HRTEM studies showed that these nanowires were hexagonal GaN single crystals. SEM observation demonstrated that these GaN nanorods with diameters ranging from 50 nm to 100 nm and lengths up to several micrometers intervene with each other on the substrate.     

Synthesis of GaN nanowires by CVD method: effect of reaction temperature

GaN nanowires are fabricated on Si substrates by ammoniating Ga₂O₃/NiCl₂ thin films using chemical vapour deposition method. The influence of reaction temperature on microstructure, morphology and optical properties of GaN nanowires is characterised by X-ray diffraction, X-ray photoelectron spectroscopy, Fourier transform infrared spectrophotometer, scanning electron microscopy, transmission electron microscopy, high-resolution transmission electron microscopy and photoluminescence. The results demonstrate that the GaN nanowires are single crystalline and exhibit hexagonal wurtzite symmetry. The best crystalline quality was achieved for an reaction temperature of 1150°C for 15?min. The growth process follows vapour–liquid–solid mechanism and Ni plays an important role as the nucleation point and as a catalyst.     

Synthesies and properties of Tb-doped GaN nanowires

The synthesis of Tb-doped GaN nanowires on Si (111) substrates through ammoniating Ga₂O₃ films doped with Tb was investigated. X-ray photoelectron spectroscopy, X-ray diffraction, scanning electron microscope, high-resolution transmission electron microscopy and photoluminescence were used to characterize the composition, structure, morphology and optical properties of the products. The results show that the as-synthesized GaN nanowires doped with 3 at % Tb are of single-crystalline hexagonal wurtzite structure. The nanowires have diameters ranging from 30 to 50 nm and the lengths up to tens of micrometers. An f-f intra-atomic transition of rare earth at 545 nm corresponding to ⁵ D ₄–⁷ F ₅ of the Tb³⁺ and other two peaks related with doping are observed in PL spectrum, confirming the doping of Tb into GaN. The growth mechanism of GaN nanowires was discussed briefly.     

GaN nanowires grown on silicon substrates engraved using stainless-steel micro-tip

GaN nanostructures have been synthesized on silicon substrates using chemical vapor deposition. Prior to growth silicon substrates were engraved using stainless-steel micro-tips. Straight as well as twisted nanowires were observed along the engraved lines/regions. Straight nanowires were few tens of microns in length and the twisted ones were few microns in length with diameter variation between 30 nm and 100 nm. The electron microscopy analysis indicates that the nanowires were grown parallel to the c-axis and possible growth mechanism is described. Raman scattering indicates good quality of nanowires exhibiting intense E₂(high) mode and A₁(LO) mode and a huge red-shift in the mode position indicates nano-size effects. Such engraved substrates without any explicit catalyst can provide site controlled growth of nanowires and this methodology is extendable for growing nanowires of related materials.     

Effect of the ammoniating time on microstructure and morphology of one-dimensional Mg-doped GaN nanowires catalysed with Au

Mg-doped GaN nanowires have been successfully synthesised on Si(1?1?1) substrates by magnetron sputtering through ammoniating Ga₂O₃/Au thin films, and the effect of ammoniating time on microstructure and morphology were analysed in detail. X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, high-resolution transmission electron microscopy and photoluminescence spectrum were carried out to characterise the microstructure, morphology and optical properties of the GaN samples. The results demonstrate that the nanowires after ammonification at 900°C for 15?min are single crystal GaN with a hexagonal wurtzite structure and high crystalline quality, having the size of 50–80?nm in diameter, more than 10 microns in length and good emission properties. The growth direction of this nanowire is parallel to [0?0?1] direction of hexagonal unit cell. Ammoniating time has a great impact on the microstructure, morphology and optical properties of the GaN nanowires.     

GaN nanowires: CVD synthesis and properties

The growth of GaN nanowires from Ga and NH₃ sources in the flow of Ar carrier gas using a chemical vapor deposition (CVD) system was systematically studied. The substrates used were Si(111) and Si(100). Fabricated nanowires were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDX). We investigated the influence of growth temperature, catalyst used, Ga amount, and the ratio of Ar and NH₃ flow rates on the morphology and properties of GaN nanowires. We found that the best results were obtained for a growth temperature of 950 °C. Optimal catalysts were Au and metallic Ni, while the use of nickel nitrate was found to lead to formation of SiO_x nanowire bunches in addition to GaN nanowires. For the optimal temperature and catalyst used, the influence of the Ga to N ratio on the nanowire growth was studied. It was found that different types of nanostructures are observed in relatively Ga-rich and in relatively N-rich conditions. Growth mechanisms of different types of nanowires, including the stacked-cone nanowires and the microscale structures formed by lateral growth under N-rich conditions, are discussed.     

Synthesis of single-crystal GaN nanowires on Si(111) substrate by ammonification technology

GaN nanowires have been synthesized on Si(111) substrate through ammoniating Ga₂O₃/BN films under flowing ammonia atmosphere at the temperature of 900 °C. The as-synthesized GaN nanowires were characterized by X-ray diffraction (XRD), selected-area electron diffraction (SAED), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscope (SEM) and transmission electron microscope (TEM). The results demonstrated that the nanowires are hexagonal wurtzite GaN and possess a smooth surface with diameters ranging from 40 to 100 nm and lengths up to several tens of micrometers. The growth mechanism of crystalline GaN nanowires is discussed briefly.     

Influence of reaction time on growth of GaN nanowires fabricated by CVD method

GaN nanowires have been fabricated successfully on Si (111) substrates coated with NiCl₂ thin films by chemical vapor deposition method using Ga₂O₃ as raw material. The growth of GaN nanowires was investigated as a function of reaction times so as to study the influence of different durations on the components, microstructure, morphologies and optical properties of GaN samples in particular by X-ray diffraction, FT-IR spectrophotometer, scanning electron microscope, and photoluminescence. The results show that the samples after reaction are single crystal GaN with hexagonal wurtzite structure and high-quality crystalline after reaction at 1,100 °C for 60 min, which have good optical properties as revealed by PL spectra. Reaction time greatly influences the growth of GaN nanowires, that is, with the increase in reaction time, the crystalline quality of GaN nanowires is improved accordingly. The growth of the GaN nanowires follows the vapor–liquid-solid mechanism and Ni plays an important role as catalyst, which forms nucleation point in the growth of GaN nanowires.     

Fabrication of single-crystalline gallium nitride nanowires by using alginate as template

Hexagonal gallium nitride nanowires were synthesized successfully by solvothermal method with alginate as template. The microstructure, morphologies and compositions of the as-prepared product were characterized by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SAED), high resolution transmission electron microscopy (HRTEM), and energy dispersive X-ray (EDX). Results suggested that the rod-like nanowires were hexagonal single-crystalline GaN growing along [001] direction. The photoluminescence spectra (PL) of the GaN revealed that the as-synthesized sample possesses excellent optical properties.     

Smooth germanium nanowires prepared by a hydrothermal deposition process

Smooth germanium nanowires were prepared using Ge and GeO₂ as the starting materials and Cu sheet as the substrate by a simple hydrothermal deposition process. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) characterizations show that the germanium nanowires are smooth and straight with uniform diameter of about 150 nm in average and tens of micrometers in length. X-ray diffraction (XRD) and Raman spectrum of the germanium nanowires display that the germanium nanowires are mainly composed of cubic diamond phase. PL spectrum shows a strong blue light emission at 441 nm. The growth mechanism is also discussed.     

Structural characterization of β-SiC nanowires synthesized by direct heating method

Crystal structure of β-SiC nanowires was investigated using Raman spectroscopy, FT-IR, XRD, transmission electron microscopy and selected area electron diffraction. Cubic β-SiC nanowires were synthesized by heating NiO catalyzed Si substrates with WO₃ and graphite mixed powders in the growth temperature of 1000–1100 °C. HRTEM image showed atomic arrangements of the grown SiC nanowires with a main growth direction of [111]. Raman spectra showed two characteristic peaks at 796 cm^− 1 and 968 cm^− 1, which are corresponding to transversal optic mode and longitudinal optic mode of β-SiC, respectively. Also, FT-IR absorption spectroscopy showed a SiC characteristic absorption band at ∼792 cm^− 1.     

Synthesis and characterization of indium nitride nanowires by plasma-assisted chemical vapor deposition

High-quality indium nitride (InN) nanowires were synthesized in a high temperature furnace on Au-coated Si substrates through the reaction of indium metal vapor with highly reactive nitrogen radicals generated by N₂ plasma. Highly-reactive nitrogen radicals provided a wide process window for the synthesis of InN nanowires by lowering the process temperature to avoid the decomposition of InN. X-ray diffraction, transmission electron microscopy and Raman spectra further showed that the as-synthesized InN nanowires were perfect single crystallites of wurtzite structure with the growth direction along [110].     

Growth and optical properties of uniform tungsten oxide nanowire bundles via a two-step heating process by thermal evaporation

Tungsten oxide (WO₃) nanowires with diameters of 15-40 nm and lengths of hundreds of nanometers were synthesized by thermal chemical vapor deposition (CVD) without using any catalyst in a low-temperature zone (200-300 °C) of a tube furnace via a two-step heating process. The morphology, composition, and crystal structure were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDS), Raman, ultraviolet UV-visible, and cathodoluminescence (CL) spectroscopy. XRD and TEM confirmed that the nanowires were triclinic WO₃ with growth direction along [001]. Blue emission was observed in both the UV-visible and CL spectrum, indicating that the WO₃ nanowires exhibited a red-shift at an optical absorption wavelength due to oxygen deficiencies. The crystallinity and size distribution of the nanowires influenced the bandgap. In the CL spectrum, the blue emission was at shorter wavelengths than reported previously, which can be attributed to the nanoscale size effect.     

Solid phase growth of tin oxide nanostructures

For the first time, single-crystalline SnO₂ nanostructures comprising of nanobelts, nanowires and nanosheets have been synthesised by solid phase crystal growth from tin oxide single crystals. The product was characterised by X-ray diffraction, scanning electron microscopy, energy dispersive X-ray analysis, transmission electron microscopy, selected area electron diffraction, and Raman spectroscopy. The procedure consisted of two stages. In the first stage, a mixture of SnO₂ polyhedral single crystals attached with graphite particles were produced by heating a mixture of SnCl₂ and graphite. Then, the SnO₂ single crystals were grown into nanobelts, nanowires and nanosheets by further heating. The role of graphite in the process is also discussed to be the surface reduction of SnO₂ into oxides with lower oxygen content which provide a driving force for surface diffusion and subsequent crystal growth of tin oxide into the one and two dimensional nanostructures. The results provide insights for both fundamental research as well as technological production of SnO₂ nanostructures.     

Catalytic synthesis of large-scale GaN nanorods

A novel rare earth metal seed was employed as the catalyst for the growth of GaN nanorods. Large-scale GaN nanorods were synthesized successfully through ammoniating Ga₂O₃/Tb films sputtered on Si(1 1 1) substrates. Scanning electron microscopy, X-ray diffraction, transmission electron microscopy, high-resolution transmission electron microscopy, and X-ray photoelectron spectroscopy were used to characterize the structure, morphology, and composition of the samples. The results demonstrate that the nanorods are high-quality single-crystal GaN with hexagonal wurtzite structure. The growth mechanism of GaN nanorods is also discussed.     

Growth process from amorphous GaN to polycrystalline GaN on Si (111) substrates

Amorphous GaN (a-GaN) films on Si (111) substrates have been deposited by RF magnetron sputtering with GaN powder target. The growth process from amorphous GaN to polycrystalline GaN is studied by XRD, SEM, PL and Raman. XRD data mean that annealing under flowing ammonia at 850-950 °C for 10 min converts a-GaN into polycrystalline GaN (p-GaN). The growth mechanism can be mostly reaction process through N³⁻ in amorphous GaN replaced by N³⁻ of NH₃. Annealing at 1000 °C, the appearance of GaN nanowires can be understood based on the vapor-liquid-solid (VLS) mechanism. In addition, XRD, PL and Raman measurement results indicate that the quality of GaN films increases with increasing temperature. The tensile stress in the films obtained at 1000 °C is attributable to the expansion mismatch between GaN and Si, with the gallium in the film playing a negligible role.