Computer-aided monitoring and operation of continuous measuring devices.

Extended studies of measuring and control systems in activated sludge plants at EAWAG revealed that the measuring devices remain the weakest point in control applications. To overcome this problem, a software package was developed which analyses and evaluates the residuals between a reference measurement and the sensor and collects the information in a database. The underlying monitoring concept is based on a two-step evaluation of the residuals by means of statistical evaluations using control charts with two different sets of criteria. The first step is a warning phase in which hints on probable errors trigger an increase in the monitoring frequency. In the second step, the alarm phase, the error hypothesis has to be validated and should allow immediate and targeted reactions from the operator. This procedure enables an optimized and flexible monitoring effort combined with an increased probability of early detection of systematic measuring errors. Beside the monitoring concept, information about the measuring device, the performed servicing actions and the responsibilities is stored. Statistical values for the quantitative characterization of the measuring system during operation will be given. They are needed to parameterise controllers or to guarantee the accuracy of the instrument in order to allow reliable calculations of effluent tax. In contrast to other concepts, not only is the measuring device examined under standard conditions, but so is the entire measuring chain from the liquid to be analysed to the value stored in the database of the supervisory system. The knowledge of the response time of the measuring system is then required in order to allow a comparison of the corresponding values.     

堤防填筑工程施工测量监理

本文根据作者实践经验,阐述了堤防填筑工程施工测量监理应注意做好“编制测量监理细则、组织基准点交接、审批施测方案、测量外业监控和内业成果复验”等五个方面工作。     

墒情监测自动化系统设计

从需求用途、设备配置、系统功能、技术指标等方面介绍了墒情监测自动化系统的设计。对墒情传感器、数据通讯及应用软件等关键技术进行了论述。     

灌区量水设施自动化管理系统及其应用

以甘肃黄羊河灌区为例,介绍了量水设施自动化管理系统的概况、硬件配置及软件设计.系统地提高甘肃黄羊河灌区的现代化管理水平,充分发挥灌区综合效益,起到了十分重要的作用,对类似灌区具有推广价值.     

测量机器人变形监测自动化系统

TCA型测量机器人是在全站仪的基础上集成激光、精密机械、微型计算机、CCD传感器以及人工智能技术发展起来的,在滑坡、水工建筑物的变形监测中,能快速、准确地获取资料.论述了测量机器人技术系统的软硬件设计与基于GIS技术的变形监测数据库管理,以及该系统在水工建筑安全监测、滑坡变形监测上的应用.该系统的使用减少了人工劳动强度,提高了安全度,实现了滑坡、水利工程的实时监控.     

远距离泥沙输送泥泵的研制

255SP泥泵是为黄河疏浚工程中实现远距离输沙的任务而研制。该泵配套功率255kW,通过直径400mm的管道输送浓度大于500kg／m^3的泥浆,水平输距达5000m以上。文中介绍了255SP泥泵在水力设计、设计优化、产品设计、抗磨设计,以及模型和工程试验等方面的研制情况。     

丹江口大坝自动化监测运行分析

简要介绍了丹江口水利枢纽初期工程及安全监测系纯,分析了自动监测资料和自动化监测系统运行情况,并对丹江口大坝今后监测自动化的发展趋势作出了展望.     

绞吸式挖泥船定位桩断裂现象分析

绞吸式挖泥船的定位桩容易发生断裂，分析其原因是设备制造时存在缺陷或挖泥船在作业过程中的操作不当。提出了预防定位桩断裂的措施。     

江垭水电站220、110 kV电缆安装质量控制

江垭水电站２２０ｋＶ、１１０ｋＶ交联聚乙烯电缆使用场所垂直高差为９７．２１ｍ，在国内居首位，国外也极少见。２２０ｋＶ电缆与ＧＩＳ配电装置相连的终端，因设计原因造成开关站电缆夹层高度不够，现场安装只得拆开ＧＩＳ进线罐，这种安装方式在国内还是首次采用。监理工程师对电缆安装全过程进行严格的质量控制，在电缆本体敷设过程中，从敷设前卡架、夹具安装，敷设时托辊布置、电缆施放、固定、终端制作等各工序进行了严密的     

测量机器人在滑坡应急监测中的应用

为了解决较危险滑坡加速变形阶段的监测问题,采用测量机器人（TC2300全站仪）对滑坡进行全自动应急监测。通过对测量机器人技术组成、系统应用及变形监测方法的分析,针对三峡库区某滑坡的变形情况,在原有的GPS监测系统的基础上,建立了测量机器人全自动应急监测系统。重点阐述了该应急监测方案的实施情况,指出了测量机器人在滑坡应急监测中的广阔应用前景。     

龙溪水电站机组原型效率测试及优化运行方案

介绍了采用超声波技术进行机组原型效率测试的原理和方法,提供机组运行特性曲线.通过分析,编制龙溪水电站优化运行方案,指导发电运行,实现高效、经济运行的目的.