Creep and drying shrinkage characteristics of concrete produced with coarse recycled concrete aggregate

Laboratory tests are performed to investigate the effects of a new method of mixture proportioning on the creep and shrinkage characteristics of concrete made with recycled concrete aggregate (RCA). In this method, RCA is treated as a two component composite material consisting of residual mortar and natural aggregate; accordingly, when proportioning the concrete mixture, the relative amount and properties of each component are individually considered. The test variables include the mixture proportioning method, and the aggregate type. The results show that the amounts of creep and shrinkage in concretes made with coarse RCA, and proportioned by the new method, are comparable to, or even lower than, those in similar concretes made entirely with natural aggregates. Furthermore, it is demonstrated that by applying the proposed “residual mortar factor” to the existing ACI and CEB methods for calculating creep or shrinkage of conventional concrete, these methods could be also applied to predict the creep and shrinkage of RCA-concrete.     

Long term deformations by creep and shrinkage in recycled aggregate concrete

The main aim of this work was to determine creep and shrinkage variations experienced in recycled concrete, made by replacing the main fraction of the natural aggregate with a recycled aggregate coming from waste concrete and comparing it to a control concrete. It was possible to state that the evolution of deformation by shrinkage and creep was similar to a conventional concrete, although the results after a period of 180 days showed the influence of the substitution percentage in the recycled aggregates present in the mixture. In the case when 100% coarse natural aggregate was replaced by recycled aggregate there was an increase in the deformations by creep of 51% and by shrinkage of 70% as compared to those experienced by the control concrete. The substitution percentages of coarse natural aggregate by coarse recycled aggregate were 20, 50 and 100%. Fine natural aggregate was used in all cases and the amount of cement and water–cement ratio remained constant in the mixture.     

Restrained shrinkage cracking in fibre-reinforced cementitious composites

The influence of seven types of fibres on restrained shrinkage cracking in Portland cement pastes and mortars is investigated at various fibre volume fractions. Linear specimens with one-dimensional restraint were subjected to a drying environment soon after casting. Fibres belonging to two major categories-macro (large) and micro (fine)-were investigated. These two categories of fibres were found to result in distinctly different cracking patterns due, in part, to their different reinforcing mechanisms. An attempt is made to relate the observed cracking patterns with the perceptible micromechanical processes. A ‘fibre efficiency factor’ is proposed which appears to be an appropriate basis for grading the fibres.     

Restrained shrinkage in repaired reinforced concrete elements

This paper describes an analytical model of restrained shrinkage in repaired reinforced concrete elements. The results of analysis and test show that the effect of restrained shrinkage on the serviceability of the repaired element is quite significant. The computer based analysis proposed can be applied to predict progressive crack development in a repair material subjected to restrained shrinkage during construction. The properties of repair materials, such as ultimate strain in tension, creep coefficient and free shrinkage, are major factors influencing the performance of structural repairs. Restrained shrinkage is related to the stiffness of a repaired section of known structure. The effect of moment redistribution on restrained shrinkage is significant in elements of indeterminate structure. The stress and strain caused by restrained shrinkage in elements of indeterminate structure are higher than in elements of known structure, and an example given in this paper shows an increase in strain of about 30%.     

Durability of recycled aggregate concrete prepared with carbonated recycled concrete aggregates

The mechanical properties of recycled aggregate concrete (RAC) incorporating carbonated recycled concrete aggregates (RCAs) have previously been reported. However, the durability of RAC prepared with carbonated RCAs remains to be accessed. In this study, the durability properties of RAC prepared with non-carbonated RCAs and carbonated RCAs, in terms of deformation (drying shrinkage), water absorption and permeability (bulk electrical conductivity, gas and chloride ion permeability), are presented. The experimental results indicated that: (i) the incorporation of the carbonated RCAs in RAC not only helped to reduce the water absorption of RAC, but also reduced its permeability; (ii) when 100% carbonated NRCAs was used, the improvement extent of impermeability was 15.1%, 36.4% and 42.4% for bulk electrical conductivity, chloride ion permeability and gas permeability, respectively. Comparing the results of the mechanical and durability properties, the CO₂ curing treatment of RCAs had a greater beneficial impact on the durability properties of the RAC; and (iii) there was a good correlation between the water absorption of RAC and its permeability indicators. The water absorption value of RAC may be used as a criterion of the durability of RAC.     

Carbonation behaviour of recycled aggregate concrete

This paper reviews the effect of incorporating recycled aggregates, sourced from construction and demolition waste, on the carbonation behaviour of concrete. It identifies various influencing aspects related to the use of recycled aggregates, such as replacement level, size and origin, as well as the influence of curing conditions, use of chemical admixtures and additions, on carbonation over a long period of time. A statistical analysis on the effect of introducing increasing amounts of recycled aggregates on the carbonation depth and coefficient of accelerated carbonation is presented. This paper also presents the use of existing methodologies to estimate the required accelerated carbonation resistance of a reinforced recycled aggregate concrete exposed to natural carbonation conditions with the use of accelerated carbonation tests. Results show clear increasing carbonation depths with increasing replacement levels when recycled aggregate concrete mixes are made with a similar mix design to that of the control natural aggregate concrete. The relationship between the compressive strength and coefficients of accelerated carbonation is similar between the control concrete and the recycled aggregate concrete mixes.     

Restrained shrinkage cracking: the role of shrinkage reducing admixtures and specimen geometry

Early-age cracking may occur in concrete elements if shrink-age is prevented by the surrounding structure. The risk of early-age shrinkage cracking in any given structure is influenced by many factors including the magnitude of shrinkage, rate of shrinkage, degree of stress relaxation, degree of structural restraint, and rate at which material properties develop. In addition to the aforementioned factors, this paper highlights the fact that shrinkage cracking is also influenced by geometry. This paper compares two series of experiments to better understand the role of specimen geometry. In the first series ring specimens of varying size were prepared to undergo the same rate of shrink-age and maximum strain development. Although the maximum residual tensile stress that developed was nearly identical for all geometries, the age at which cracking occurred varied with specimen thickness. In the second series of experiments the combined effect of moisture gradients and specimen geometry was investigated. In these experiments specimen thickness was varied while the surface area exposed to drying was maintained constant. The age of cracking was measured, as was the development of a moisture gradient. Again the influence of specimen size/geometry was apparent with smaller specimens cracking at an earlier age. This paper provides an explanation for this geometry dependence through the use of fracture mechanics concepts.     

Use of recycled concrete aggregate in high-strength concrete

The results of a test programme to study the use of recycled concrete aggregate (RCA) in high-strength, 50 N/mm² or greater, concrete are described. The effects of coarse RCA content on the ceiling strength, bulk engineering and durability properties of such concretes have been established. The results showed that up to 30% coarse RCA had no effect on concrete strength, but therafter there was a gradual reduction as the RCA content increased. A method of accommodating the effects of high RCA content, involving simple adjustment to water/cement ratio of the mix is given. It is shown that high-strength RCA concrete will have equivalent engineering and durability performance to concrete made with natural aggregates, for corresponding 28-day design strengths. The practical implications of the study for concrete construction are discussed.

---

Résumé Sont décrits ici les résultats d’une série d’essais destinés à étudier l’utilisation de granulats provenant du recyclage d’éléments en béton (RCA) dans des bétons de haute résistance (50 MPa et plus). Les effets de la teneur en gros granulats recyclés sur la résistance des plafonds et des batiments, ainsi que les propriétés de tels bétons ont été établis. Les résultats ont montré qu’une teneur allant jusqu’à 30% en gros granulats recyclés n’a pas d’effet sur la résistance du béton, mais qu’au dessus de 30%, la résistance diminue progressivement à mesure que la teneur en gros granulats recyclés augmente. Une méthode visant à accommoder les effets dus à une forte proportion de RCA, nécessitant un simple ajustement du rapport eau/ciment dans le mélange, est proposée. Il est prouvé que le béton RCA de haute résistance aura des qualités de résistance et de durabilité équivalentes à celles de bétons constitués de granulats naturels, pour les résistances mécaniques à 28 jours prévues. Les implications pratiques de l’étude sur la réalisation d’ouvrages en béton sont présentées.

     

Assessing relationships among properties of demolished concrete, recycled aggregate and recycled aggregate concrete using regression analysis

Recycled demolished concrete (DC) as recycled aggregate (RA) and recycled aggregate concrete (RAC) is generally suitable for most construction applications. Low-grade applications, including sub-base and roadwork, have been implemented in many countries; however, higher-grade activities are rarely considered. This paper examines relationships among DC characteristics, properties of their RA and strength of their RAC using regression analysis. Ten samples collected from demolition sites are examined. The results show strong correlation among the DC samples, properties of RA and RAC. It should be highlighted that inferior quality of DC will lower the quality of RA and thus their RAC. Prediction of RAC strength is also formulated from the DC characteristics and the RA properties. From that, the RAC performance from DC and RA can be estimated. In addition, RAC design requirements can also be developed at the initial stage of concrete demolition. Recommendations are also given to improve the future concreting practice.     

Effect of recycled coarse aggregate on damage of recycled concrete

This study evaluates the possibility of measuring the damage of the recycled concrete. In this way, two conventional concretes with a w/c ratio of 0.55 and 0.65 were designed. Based on them, six recycled concretes with different percentages of replacement of natural coarse aggregates with recycled coarse aggregate (20, 50 and 100%) were obtained. To take into account the high absorption capacity of the recycled aggregates, before using them they were pre-wetted for 10 min. The results concluded that scalar damage mechanics (based on the variations of the elastic modulus) and volumetric strains curves can be use to quantify the damage of the recycled concrete. The results from both approaches indicated that the damage to concrete depended on the percentage of replacement, increasing with higher replacement percentages. Additionally, values of the damage, that are quantified using the critical stress and according to the scalar damage mechanics, are given.     

再生骨料掺配比对再生透水混凝土性能的影响

为研究再生骨料在透水混凝土（RPC）中的应用,选用废弃路面素混凝土块为再生骨料来源,设计2种系列,研究再生骨料透水混凝土中再生骨料掺配问题,即分别以粒径9.5~19.0 mm,再生骨料按0%、25%、50%、75%和100%（基准）质量替代同粒径天然骨料碎石（系列1）和以4.75~9.5 mm、9.5~19.0 mm两种粒径,再生骨料按0∶1、1∶1、1∶2、2∶1、2∶3和3∶2掺比（系列2）制备RPC,并分析其物理、力学、透水性能及其相互关系,得到了合理的再生骨料替代率和双粒级掺比,在1∶1和2∶1掺配下能够得到较好的强度及透水性能。通过切割试块的图像化处理,分析其孔隙分布特征和趋势,并将平面孔隙率、等效孔径和透水系数联系起来。结果表明,再生透水混凝土的透水能力主要取决于截面孔隙个数和面积。     

Restrained shrinkage cracking in steel fibre reinforced and rubberised cement-based mortars

The paper focuses on the combined effect of Steel Fibre Reinforcement and of Rubber aggregates on the resistance to restrained shrinkage cracking of cement-based mortars. The kinetics of restrained shrinkage cracking of a control mortar is compared both to the one incorporating a single fibre content as reinforcement and to the above fibre reinforcement combined to rubber aggregates substitution. Two rates of substitution were considered in the case of Steel Fibre Reinforced and Rubberized Mortar (SFRRM). The used rubber aggregates are obtained by grinding used tyres, a way that may address the demand for the conservation of a clean environment by recycling an industrial by-product. Fibre-reinforced mortar was based on the control mortar and one metal fibre content was studied: 40 kg/m³ (0.5% by volume). The used fibres have a high bond with the cementitious matrix. SFRRM composites were cast using two contents of rubber aggregates: 20 and 30% by volume replacing mineral aggregates and the one fibre content reported here above (40 kg/m³). Tests were conducted using ring type specimens to simulate restrained shrinkage cracking according to ASTM C 1581-04 standard. Additionally, after the cracking occurred, the development of the crack widths was measured by video-microscope. Ring tests demonstrated that the SFRRM exhibit high strain capacity prior to macro-cracking localization and the effectiveness of rubber aggregates along with their positive synergistic effect when combined with fibre reinforcement to improve resistance to shrinkage cracking. It is a promising solution to improve the durability of large surface area such as pavements and thin bonded cement-based overlays, whose durability is often limited by shrinkage cracking.     

Effect of carbonation of modeled recycled coarse aggregate on the mechanical properties of modeled recycled aggregate concrete

The modeled recycled aggregate concrete (MRAC) which is an idealized model for the real recycled aggregate concrete (RAC) was used in this study. The MRCAs prepared with two types of old mortars were modified by an accelerated carbonation process. The effects of carbonation of MRCA on the micro-hardness of MRCA and the mechanical properties of MRAC were investigated. The results indicated that the micro-hardness of the old interfacial transition zone (ITZ) and the old mortar in the carbonated MRCAs was higher than that in the uncarbonated MRCAs, and the enhancement of the old ITZ was more significant than that of the old mortar. The compressive strength and modulus of MRACs increased when the carbonated MRCAs were utilized, and the improvement was more significant for MRAC prepared with a higher w/c. In addition, a numerical study was carried out and it showed that the improvement in strength by carbonation treatment was less obvious when the difference between the new and old mortar was larger.     

Short and long-term behavior of structural concrete with recycled concrete aggregate

Recycling concrete construction waste is a promising way towards sustainable construction. Coarse recycled concrete aggregates have been widely studied in recent years, however only few data have been reported on the use of fine recycled aggregates. Moreover, a lack of reliable data on long-term properties of recycled aggregate concrete has to be pointed out.In this paper the effects of both fine and coarse recycled concrete aggregates on short and long-term mechanical and physical properties of new structural concrete are investigated. The studied concrete mixes have been designed by adjusting and selecting the content and grain size distribution of concrete waste with the goal to obtain medium–high compressive strength with high content of recycled aggregates (ranging from 27% to 63.5% of total amount of aggregates).Time-dependent properties, such as shrinkage and creep, combined with porosity measurements and mechanical investigations are reported as fundamental features to assess structural concrete behavior.     

Prediction model of carbonation depth for recycled aggregate concrete

The prediction of carbonation depth for recycled aggregate concrete (RAC) is investigated in this paper. The existing prediction models were evaluated, and it showed that the coefficient of variation (COV) of model error for the existing models is high. By introducing the weighed water absorption of aggregates, the COV of model error can be effectively decreased. Compared with the existing models, the proposed model can predict more accurate carbonation depths. For RAC specimens, compared with the fib model and Xiao and Lei's model-a, the COV of model error of the proposed model is 0.36 which is decreased by 33.3%, and when compared with Xiao and Lei's model-b and Silva et al.’s model, the corresponding decreases are 55.2% and 16.2%. Finally, the proposed model is validated by a 10-year-old carbonation experiment, which indicates that the proposed model is reasonable and can be applied to predict the carbonation depth of RAC.     

Properties of self-compacting concrete prepared with recycled glass aggregate

The effects of recycled glass (RG) cullet on fresh and hardened properties of self-compacting concrete (SCC) were investigated. RG was used to replace river sand (in proportions of 10%, 20% and 30%), and 10 mm granite (5%, 10% and 15%) in making the SCC concrete mixes. Fly ash was used in the concrete mixes to suppress the potential alkali-silica reaction. The experimental results showed that the slump flow, blocking ratio, air content of the RG–SCC mixes increased with increasing recycled glass content. The compressive strength, tensile splitting strength and static modulus of elasticity of the RG–SCC mixes were decreased with an increase in recycled glass aggregate content. Moreover, the resistance to chloride ion penetration increased and the drying shrinkage of the RG–SCC mixes decreased when the recycled glass content increased. The results showed that it is feasible to produce SCC with recycled glass cullet.     

高强再生骨料混凝土的配制及性能研究

采用再生粗骨料配制强度在50MPa或更大的高强再生骨料混凝土,并对其变形能力和耐久性进行测定,为高强再生骨料混凝土在工程上的应用提供理论和实验基础。通过一系列的抗压实验确定再生粗骨料的强度极限,并通过对水灰比的调整,使配制的高强再生骨料混凝土在强度上达到设计值,并以再生粗骨料取代率为0、30%、50%、80%和100%的高强再生骨料混凝土为研究对象进行实验。当再生粗骨料取代率为30%时,对再生混凝土的强度影响不大;之后混凝土强度随再生骨料的增加而降低。高强再生骨料混凝土与天然混凝土在耐久性上具有相似的性能,可以将高强再生混凝土应用于工程中。