共查询到18条相似文献,搜索用时 125 毫秒
1.
2.
3.
齿轮表层疲劳裂纹扩展的声发射模型 总被引:1,自引:0,他引:1
齿轮表面的疲劳磨损是齿轮故障的主要形式之一。从弹性力学的能量理论角度,推导出了齿轮齿表疲劳裂纹在扩展时的能量关系,并根据声发射信号的特征,构造出齿表疲劳裂纹在扩展时产生的声发射信号的理论模型,说明了影响声发射信号能量强度的主要因素为裂纹扩展时间、形变体积及载荷和弹性模量的变化率,从理论上证明了声发射技术用于检测疲劳磨损的可行性。 相似文献
4.
5.
《无损检测》2020,(1)
针对变工况条件下的滚动轴承故障声发射信号识别问题,提出了一种基于遗传算法(Genetic Algorithm,GA)与改进深度信念网络(Improved Deep Belief Network,IDBN)结合的故障检测与诊断新方法。对滚动轴承故障声发射监测信号的分析结果表明,GA-IDBN模型对滚动轴承的外圈、内圈、保持架故障的声发射监测信号的识别准确率明显优于DBN(深度信念网络)、支持向量机等模型的,识别准确率可达到95.5%;并且,GA-IDBN模型具有很强的普适性,可以识别出滚动轴承在不同通道、不同转速情况下的运行状态。证明了GA-IDBN模型具有很强的工程实用价值。 相似文献
6.
7.
8.
滚动轴承是转动机械的主要零部件,容易发生各种故障,这些故障会带来一系列安全隐患,并造成一定的经济损失。因此工业生产中滚动轴承故障诊断研究非常重要,具有巨大的用途。以滚动轴承为研究对象,建立滚动轴承声发射实验平台,采集不同缺陷、不同转速滚动轴承声发射信号,根据HMM理论和算法对声发射信号进行数据处理。首先应用MATLAB软件提取数据,进行分帧处理,进而提取特征向量,得出似然概率。将不同缺陷滚动轴承似然概率进行数据拟合,得到似然概率和转速拟合公式。对二种转速不同、已知缺陷滚动轴承声发射信号进行测试,并对某种缺陷滚动轴承声发射信号进行诊断。结果表明,HMM可以有效地对滚动轴承故障进行诊断。 相似文献
9.
在介绍了声发射技术的基础上,采用BP神经网络,分别对预置故障的港口起重机典型结构——箱型梁的声发射信号进行分析。选用原始波形特征参数以及它们之间组合派生出的特征参数等9个参数作为神经网络的输入,设计箱型梁大应力区常见五种故障模式:正常、局部表面裂纹、局部深埋裂纹、局部焊缝、对接焊缝为最终识别分类模式。结果表明,该方法可以对以上五种模式的声发射源进行有效识别。 相似文献
10.
基于HHT的预应力钢筋混凝土梁断裂AE信号分析 总被引:2,自引:0,他引:2
针对混凝土材料损伤所产生的声发射信号复杂的特点,提出了基于Hilbert—Huang变换的分析混凝土声发射信号的新方法。利用全波形声发射技术记录了预应力混凝土梁在三点弯曲荷载试验下整个破坏过程的声发射信号,研究了声发射累计能量随时间变化的关系曲线,分析了梁在不同破坏阶段产生的实测声发射信号,获得了信号的Hilbert谱。通过与小波分析结果进行比较,显示出该方法具有处理精度高、自适应性强的特点,能有效地提取声发射信号中损伤的主要特征,为声发射信号处理提出了一种新的途径。 相似文献
11.
12.
13.
The most established technique for monitoring the integrity of rolling element bearings is vibration analysis. However, at extremely slow rotational speeds monitoring the health of rolling element bearings is fraught with difficulty. Part I of this work details difficulties with monitoring rolling element bearings rotating at speeds of less than 2 rpm. Furthermore, it presents a study of the high frequency acoustic emission (AE) technique as a means of monitoring low-speed rolling element bearings. The application of AEs to monitor operational slow-speed bearings with bore diameters of 120 mm is presented. It is concluded that the mechanism of AE generation was the relative movement between bearing elements experiencing loss of mechanical integrity, for example, the rolling/sliding action of a roller on a defective outer race. 相似文献
14.
15.
应用声发射技术对蜂窝夹层复合材料压缩损伤过程进行了试验研究。分析载荷与声发射信号关联图,依据其损伤过程和声发射特征,发现随着加载条件下载荷的增加,复合材料的损伤逐步增大。在加载初始阶段,仅有少量声发射信号,各种表征信号量小幅度增加;在加载中期,声发射信号增多,各种表征信号量不断增大;在加载后期,声发射信号有明显突增,各种表征信号量急剧增加。复合材料压缩损伤破坏与声发射的幅值、能量、撞击、上升时间、持续时间和计数等参量特征相关。根据各阶段特征参量滤波后所得信号分布与实际断裂位置相吻合。 相似文献
16.
17.
18.
The first attempt of an acoustic emission (AE) application for the control of isothermal transformation, at the temperature
near the martensite start (M
S
) in 100CrMnSi6-4 bearing steel, is made herein. A unique method for recording the signals of the AE was developed. The Short
Time Fourier Transform algorithm was used for displaying the signal values on the spectrogram graphs. Acoustic emission showed
the nucleation and growth of the isothermal martensite in the residual austenite. The maximum power spectral density of signals
was determined using the relative intensity of the RMS values. The observed energy of separated signals during the second
stage of residual austenite decomposition is comparable to the energy of the initial stage at lower temperatures. It was proposed
as a new process concept under paraequilibrium that involves the midrib formation and swing back in the kinetics of lower
bainite. 相似文献