Mechanical elasticity of vapour-liquid-solid grown GaN nanowires

Mechanical elasticity of hexagonal wurtzite GaN nanowires with hexagonal cross sections grown through a vapour-liquid-solid (VLS) method was investigated using a three-point bending method with a digital-pulsed force mode (DPFM) atomic force microscope (AFM). In a diameter range of 57-135?nm, bending deflection and effective stiffness, or spring constant, profiles were recorded over the entire length of end-supported GaN nanowires and compared to the classic elastic beam models. Profiles reveal that the bending behaviour of the smallest nanowire (57.0?nm in diameter) is as a fixed beam, while larger nanowires (89.3-135.0?nm in diameter) all show simple-beam boundary conditions. Diameter dependence on the stiffness and elastic modulus are observed for these GaN nanowires. The GaN nanowire of 57.0?nm diameter displays the lowest stiffness (0.98?N?m(-1)) and the highest elastic modulus (400 ± 15?GPa). But with increasing diameter, elastic modulus decreases, while stiffness increases. Elastic moduli for most tested nanowires range from 218 to 317?GPa, which approaches or meets the literature values for bulk single crystal and GaN nanowires with triangular cross sections from other investigators. The present results together with further tests on plastic and fracture processes will provide fundamental information for the development of GaN nanowire devices.     

Directed growth of horizontally aligned gallium nitride nanowires for nanoelectromechanical resonator arrays

We report the growth of horizontally aligned arrays and networks of GaN nanowires (NWs) as resonant components in nanoelectromechanical systems (NEMS). A combination of top-down selective area growth (SAG) and bottom-up vapor-liquid-solid (VLS) synthesis enables flexible fabrication of highly ordered nanowire arrays in situ with no postgrowth dispersion. Mechanical resonance of free-standing nanowires are measured, with quality factors (Q) ranging from 400 to 1000. We obtained a Young's modulus (E) of approximately 338 GPa from an array of NWs with varying diameters and lengths. The measurement allows detection of nanowire motion with a rotating frame and reveals dual fundamental resonant modes in two orthogonal planes. A universal ratio between the resonant frequencies of these two fundamental modes, irrespective of their dimensions, is observed and attributed to an isosceles cross section of GaN NWs.     

Controlled synthesis of AlN/GaN multiple quantum well nanowire structures and their optical properties

We report the controlled synthesis of AlN/GaN multi-quantum well (MQW) radial nanowire heterostructures by metal-organic chemical vapor deposition. The structure consists of a single-crystal GaN nanowire core and an epitaxially grown (AlN/GaN)(m) (m = 3, 13) MQW shell. Optical excitation of individual MQW nanowires yielded strong, blue-shifted photoluminescence in the range 340-360 nm, with respect to the GaN near band-edge emission at 368.8 nm. Cathodoluminescence analysis on the cross-sectional MQW nanowire samples showed that the blue-shifted ultraviolet luminescence originated from the GaN quantum wells, while the defect-associated yellow luminescence was emitted from the GaN core. Computational simulation provided a quantitative analysis of the mini-band energies in the AlN/GaN superlattices and suggested the observed blue-shifted emission corresponds to the interband transitions between the second subbands of GaN, as a result of quantum confinement and strain effect in these AlN/GaN MQW nanowire structures.     

Doping of Si into GaN nanowires and optical properties of resulting composites

Doping of Si into GaN nanowires has been successfully attained via thermal evaporation in the presence of a suitable gas atmosphere. Analysis indicated that the Si-doped GaN nanowire is a single crystal with a hexagonal wurtzite structure, containing 2.2 atom % of Si. The broadening and the shift of Raman peak to lower frequency are observed, which may be attributed to surface disorder and various strengths of the stress. The band-gap emission (358 nm) of Si-doped GaN nanowires relative to that (370 nm) of GaN nanowires has an apparent blue shift (approximately 12 nm), which can be ascribed to doping impurity Si.     

Multi-quantum-well nanowire heterostructures for wavelength-controlled lasers

Rational design and synthesis of nanowires with increasingly complex structures can yield enhanced and/or novel electronic and photonic functions. For example, Ge/Si core/shell nanowires have exhibited substantially higher performance as field-effect transistors and low-temperature quantum devices compared with homogeneous materials, and nano-roughened Si nanowires were recently shown to have an unusually high thermoelectric figure of merit. Here, we report the first multi-quantum-well (MQW) core/shell nanowire heterostructures based on well-defined III-nitride materials that enable lasing over a broad range of wavelengths at room temperature. Transmission electron microscopy studies show that the triangular GaN nanowire cores enable epitaxial and dislocation-free growth of highly uniform (InGaN/GaN)n quantum wells with n=3, 13 and 26 and InGaN well thicknesses of 1-3 nm. Optical excitation of individual MQW nanowire structures yielded lasing with InGaN quantum-well composition-dependent emission from 365 to 494 nm, and threshold dependent on quantum well number, n. Our work demonstrates a new level of complexity in nanowire structures, which potentially can yield free-standing injection nanolasers.     

Electrical actuation and readout in a nanoelectromechanical resonator based on a laterally suspended zinc oxide nanowire

In this paper, we present experimental results describing enhanced readout of the vibratory response of a doubly clamped zinc oxide (ZnO) nanowire employing a purely electrical actuation and detection scheme. The measured response suggests that the piezoelectric and semiconducting properties of ZnO effectively enhance the motional current for electromechanical transduction. For a doubly clamped ZnO nanowire resonator with radius ~10 nm and length ~1.91 μm, a resonant frequency around 21.4 MHz is observed with a quality factor (Q) of ~358 in vacuum. A comparison with the Q obtained in air (~242) shows that these nano-scale devices may be operated in fluid as viscous damping is less significant at these length scales. Additionally, the suspended nanowire bridges show field effect transistor (FET) characteristics when the underlying silicon substrate is used as a gate electrode or using a lithographically patterned in-plane gate electrode. Moreover, the Young's modulus of ZnO nanowires is extracted from a static bending test performed on a nanowire cantilever using an AFM and the value is compared to that obtained from resonant frequency measurements of electrically addressed clamped–clamped beam nanowire resonators.     

The controlled growth of GaN nanowires

This paper reports a scalable process for the growth of high-quality GaN nanowires and uniform nanowire arrays in which the position and diameter of each nanowire is precisely controlled. The approach is based on conventional metalorganic chemical vapor deposition using regular precursors and requires no additional metal catalyst. The location, orientation, and diameter of each GaN nanowire are controlled using a thin, selective growth mask that is patterned by interferometric lithography. It was found that use of a pulsed MOCVD process allowed the nanowire diameter to remain constant after the nanowires had emerged from the selective growth mask. Vertical GaN nanowire growth rates in excess of 2 mum/h were measured, while remarkably the diameter of each nanowire remained constant over the entire (micrometer) length of the nanowires. The paper reports transmission electron microscopy and photoluminescence data.     

Research on quantum efficiency and photoemission characteristics of exponential-doping GaN nanowire photocathode

Aimed at improving the actual photoemission performance of nanowire photocathode, an axial exponential-doping GaN nanowire photocathode is proposed. Based on two-dimensional continuity equation and finite difference method, the quantum efficiency of this exponential-doping GaN nanowire photocathode is obtained. The simulation results suggest that this structure of GaN nanowire photocathode can effectively obviate the difficulty in collecting the electrons escaping from side faces because a large part of carriers will escape from top surface under the built-in electric field. Besides, it is discovered that the optimal height of nanowires is 300 nm when the doping concentration of top surface is 1 × 10¹⁸ cm^?3 and that of back interface is 1 × 10¹⁹ cm^?3. Then, when the nanowires are arranged as array, the optimal light angle of incidence is approximately 60° by analyzing the electrons flow density of the array. By comparison of collection proportion of photoelectrons, the optimal nanowire spacing is 231 nm. This study demonstrates potential application value of exponential-doping GaN nanowire photocathode. The results can direct the preparation of this kind of photocathode.     

Fabrication of surface plasmon resonators by nanoskiving single-crystalline gold microplates

This paper demonstrates the sectioning of chemically synthesized, single-crystalline microplates of gold with an ultramicrotome (nanoskiving) to produce single-crystalline nanowires; these nanowires act as low-loss surface plasmon resonators. This method produces collinearly aligned nanostructures with small, regular changes in dimension with each consecutive cross-section: a single microplate thus can produce a number of "quasi-copies" (delicately modulated variations) of a nanowire. The diamond knife cuts cleanly through microplates 35 mum in diameter and 100 nm thick without bending the resulting nanowire and cuts through the sharp edges of a crystal without deformation to generate nanoscale tips. This paper compares the influence of sharp tips and blunt tips on the resonator modes in these nanowires.     

MgZnO nanowires based deep ultraviolet heterojunction light emitting diodes

Vertically aligned Mg alloyed ZnO nanowires were successfully grown by Chemical Vapor deposition method in a tube furnace. Structural analysis found that the MgZnO nanowires are with single crystalline without phase separations. The atomic ratio of Mg/O in the nanowire was determined to be approximately 15%. Photoluminescence spectra show that the band gap of ZnO nanowire was tuned to approximately 3.6 eV due to Mg incorporation. N-type MgZnO nanowires/p-type GaN was used for heterojunctional light emitting diode fabrication. Electroluminescence measurement yielded ultraviolet emission peaks, which includes a deep ultraviolet at approximately 340 nm. The results suggest that successful Mg alloying in ZnO nanowires was achieved and is promising for deep ultraviolet devices.     

In situ nanomechanics of GaN nanowires

The deformation, fracture mechanisms, and the fracture strength of individual GaN nanowires were measured in real time using a transmission electron microscope-scanning probe microscope (TEM-SPM) platform. Surface mediated plasticity, such as dislocation nucleation from a free surface and plastic deformation between the SPM probe (the punch) and the nanowire contact surface were observed in situ. Although local plasticity was observed frequently, global plasticity was not observed, indicating the overall brittle nature of this material. Dislocation nucleation and propagation is a precursor before the fracture event, but the fracture surface shows brittle characteristic. The fracture surface is not straight but kinked at (10-10) or (10-11) planes. Dislocations are generated at a stress near the fracture strength of the nanowire, which ranges from 0.21 to 1.76 GPa. The results assess the mechanical properties of GaN nanowires and may provide important insight into the design of GaN nanowire devices for electronic and optoelectronic applications.     

Semiconductor Nanowire Light‐Emitting Diodes Grown on Metal: A Direction Toward Large‐Scale Fabrication of Nanowire Devices

Bottom‐up nanowires are attractive for realizing semiconductor devices with extreme heterostructures because strain relaxation through the nanowire sidewalls allows the combination of highly lattice mismatched materials without creating dislocations. The resulting nanowires are used to fabricate light‐emitting diodes (LEDs), lasers, solar cells, and sensors. However, expensive single crystalline substrates are commonly used as substrates for nanowire heterostructures as well as for epitaxial devices, which limits the manufacturability of nanowire devices. Here, nanowire LEDs directly grown and electrically integrated on metal are demonstrated. Optical and structural measurements reveal high‐quality, vertically aligned GaN nanowires on molybdenum and titanium films. Transmission electron microscopy confirms the composition variation in the polarization‐graded AlGaN nanowire LEDs. Blue to green electroluminescence is observed from InGaN quantum well active regions, while GaN active regions exhibit ultraviolet emission. These results demonstrate a pathway for large‐scale fabrication of solid state lighting and optoelectronics on metal foils or sheets.     

Using seed particle composition to control structural and optical properties of GaN nanowires

The morphology, structure, and optical properties of gallium nitride (GaN) nanowires grown using metal-organic chemical vapor deposition (MOCVD) on r-plane sapphire using gold and nickel seed particles were investigated. We found that different seed particles result in different growth rates and densities of structural defects in MOCVD-grown GaN nanowires. Ni-seeded GaN nanowires grow faster than Au-seeded ones, and they do not contain the basal plane stacking faults that are observed in Au-seeded GaN nanowires. We propose that stacking fault formation is related to the supersaturation and surface energies in different types of seed particles. Room temperature photoluminescence studies revealed a blue-shifted peak in Au-seeded GaN nanowires compared to the GaN near-bandgap emission. The blue-shifted peak evolves as a function of the growth time and originates from the nanowire base, likely due to strain and Al diffusion from the substrate. Our results demonstrate that seed particle composition has a direct impact on the growth, structure, and optical properties of GaN nanowires and reveal some general requirements for seed particle selection for the growth of compound semiconductor nanowires.     

Dopant-free GaN/AlN/AlGaN radial nanowire heterostructures as high electron mobility transistors

We report the rational synthesis of dopant-free GaN/AlN/AlGaN radial nanowire heterostructures and their implementation as high electron mobility transistors (HEMTs). The radial nanowire heterostructures were prepared by sequential shell growth immediately following nanowire elongation using metal-organic chemical vapor deposition (MOCVD). Transmission electron microscopy (TEM) studies reveal that the GaN/AlN/AlGaN radial nanowire heterostructures are dislocation-free single crystals. In addition, the thicknesses and compositions of the individual AlN and AlGaN shells were unambiguously identified using cross-sectional high-angle annular darkfield scanning transmission electron microscopy (HAADF-STEM). Transport measurements carried out on GaN/AlN/AlGaN and GaN nanowires prepared using similar conditions demonstrate the existence of electron gas in the undoped GaN/AlN/AlGaN nanowire heterostructures and also yield an intrinsic electron mobility of 3100 cm(2)/Vs and 21,000 cm(2)/Vs at room temperature and 5 K, respectively, for the heterostructure. Field-effect transistors fabricated with ZrO(2) dielectrics and metal top gates showed excellent gate coupling with near ideal subthreshold slopes of 68 mV/dec, an on/off current ratio of 10(7), and scaled on-current and transconductance values of 500 mA/mm and 420 mS/mm. The ability to control synthetically the electronic properties of nanowires using band structure design in III-nitride radial nanowire heterostructures opens up new opportunities for nanoelectronics and provides a new platform to study the physics of low-dimensional electron gases.     

Long, highly-ordered high-temperature superconductor nanowire arrays

The preparation and electrical properties of high-temperature superconductor nanowire arrays are reported for the first time. YBa2Cu3O(7-delta) nanowires with widths as small as 10 nm (much smaller than the magnetic penetration depth) and lengths up to 200 microm are studied by four-point electrical measurements. All nanowires exhibit a superconducting transition above liquid nitrogen temperature and a transition temperature width that depends strongly upon the nanowire dimensions. Nanowire size effects are systematically studied, and the results are modeled satisfactorily using phase-slip theories that generate reasonable parameters. These nanowires can function as superconducting nanoelectronic components over much wider temperature ranges as compared to conventional superconductor nanowires.     

Effect of the ammoniating time on microstructure and morphology of one-dimensional Mg-doped GaN nanowires catalysed with Au

Mg-doped GaN nanowires have been successfully synthesised on Si(1?1?1) substrates by magnetron sputtering through ammoniating Ga₂O₃/Au thin films, and the effect of ammoniating time on microstructure and morphology were analysed in detail. X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, high-resolution transmission electron microscopy and photoluminescence spectrum were carried out to characterise the microstructure, morphology and optical properties of the GaN samples. The results demonstrate that the nanowires after ammonification at 900°C for 15?min are single crystal GaN with a hexagonal wurtzite structure and high crystalline quality, having the size of 50–80?nm in diameter, more than 10 microns in length and good emission properties. The growth direction of this nanowire is parallel to [0?0?1] direction of hexagonal unit cell. Ammoniating time has a great impact on the microstructure, morphology and optical properties of the GaN nanowires.     

Catalyst-free synthesis of well-aligned ZnO nanowires on In0.2Ga0.8N, GaN, and Al0.25Ga0.75N substrates

Well-aligned ZnO nanowires have been synthesized vertically on In0.2Ga0.8N, GaN, and Al0.25Ga0.75N substrates, using a catalyst-free carbon thermal-reduction vapor phase deposition method for the first time. The as-synthesized nanowires are single crystalline wurtzite structure, and have a growth direction of [0001]. Each nanowire has a smooth surface, and uniform diameter along the growth direction. The average diameter and length of these nanowires are 120-150 nm, and 3-10 )m, respectively. We suggest that the growth mechanism follow a self-catalyzing growth model. Excitonic emission peaked around 385 nm dominates the room-temperature photoluminescence spectra of these nanowires. The room-temperature photoluminescence and Raman scattering spectra show that these nanowires have good optical quality with very less structural defects.     

Size effect on Ge nanowires growth kinetics by the vapor-liquid-solid mechanism

Germanium nanowires were grown on germanium (111) substrate by ultra high vacuum chemical vapor deposition, via the vapor-liquid-solid growth mechanism, using digermane as gaseous precursor and gold as catalyst. The results show that the nanowire length depends on the diameter catalyst, the smaller the nanowire radius, the slower the nanowires grow.In order to fit the experimental data, we have used a simple model based on the Gibbs-Thomson effect and adapted to our growth conditions. This model was found to perfectly account for the catalyst size dependence of the experimental growth kinetics of germanium nanowires from digermane. From that, a critical radius of 6 nm was derived.     

Three-dimensional GaN/AlN nanowire heterostructures by separating nucleation and growth processes

Bottom-up nanostructure assembly has been a central theme of materials synthesis over the past few decades. Semiconductor quantum dots and nanowires provide additional degrees of freedom for charge confinement, strain engineering, and surface sensitivity-properties that are useful to a wide range of solid state optical and electronic technologies. A central challenge is to understand and manipulate nanostructure assembly to reproducibly generate emergent structures with the desired properties. However, progress is hampered due to the interdependence of nucleation and growth phenomena. Here we show that by dynamically adjusting the growth kinetics, it is possible to separate the nucleation and growth processes in spontaneously formed GaN nanowires using a two-step molecular beam epitaxy technique. First, a growth phase diagram for these nanowires is systematically developed, which allows for control of nanowire density over three orders of magnitude. Next, we show that by first nucleating nanowires at a low temperature and then growing them at a higher temperature, height and density can be independently selected while maintaining the target density over long growth times. GaN nanowires prepared using this two-step procedure are overgrown with three-dimensionally layered and topologically complex heterostructures of (GaN/AlN). By adjusting the growth temperature in the second growth step either vertical or coaxial nanowire superlattices can be formed. These results indicate that a two-step method allows access to a variety of kinetics at which nanowire nucleation and adatom mobility are adjustable.     

MBE法生长ZnO纳米线阵列的结构和光学性能

在氧等离子体辅助的MBE系统中, 以1 nm厚的Au薄膜为催化剂, 基于气?液?固(VLS)机制实现了低温ZnO纳米线阵列在Si(111)衬底表面的生长. 通过场发射扫描电子显微镜(FE-SEM)可以观察到, ZnO纳米线阵列垂直生长在衬底上, 直径为20~30 nm. X射线衍射(XRD)和高分辨透射电镜(HRTEM)结果表明: ZnO纳米线为六方纤锌矿结构, 具有沿c轴方向的择优取向. 光致发光(PL)谱显示在380 nm附近有强烈ZnO本征发射峰, 475~650 nm可见光区域有较强的缺陷导致的发射峰.