Hyperbranched polyurethane/triethanolamine functionalized multi‐walled carbon nanotube nanocomposites as remote induced smart materials

Triethanolamine functionalized multi‐walled carbon nanotubes (TEA‐f‐MWCNTs)/hyperbranched polyurethane nanocomposites were prepared by the in situ polymerization technique. The functionalization of the MWCNTs was confirmed by Fourier transform infrared spectroscopy and Raman spectroscopy studies. The homogeneous distribution and the strong interfacial interaction of TEA‐f‐MWCNTs with the polyurethane chains were confirmed by transmission electron microscopy and Fourier transform infrared spectroscopy studies, respectively. Significant enhancements of tensile strength (6.5 ? 28.5 MPa) and scratch resistance (3–7 kg) with content of TEA‐f‐MWCNTs (0–2 wt%) were observed. Thermogravimetric analysis showed an increase in thermal stability from 240 to 287 °C by the formation of nanocomposites. X‐ray diffraction and differential scanning calorimetry studies confirmed an increment in the degree of crystallinity of the nanocomposites with increase in TEA‐f‐MWCNT content. The extent of shape recovery as well as recovery speed were enhanced with increase in the output power of the microwave. Thus the studied nanocomposites could be utilized as non‐contact microwave energy tunable shape memory materials. © 2013 Society of Chemical Industry     

Synthesis and characterization of water‐soluble polypyrrole/multi‐walled carbon nanotube composites

Water‐soluble polypyrrole (PPy)/multi‐walled carbon nanotube (MWCNT) composites were prepared by mixing chemically modified MWCNTs carrying carboxylic groups (c‐MWCNTs) and sulfonated PPy (SPPy) aqueous colloids in solution. Fourier transform infrared spectroscopy, Raman spectroscopy, X‐ray photoelectron spectroscopy, X‐ray diffraction, field‐emission scanning electron microscopy and high‐resolution transmission electron microscopy were used to characterize the structure and morphology of the resulting composites. Raman and X‐ray photoelectron spectra demonstrate the presence of electrostatic interactions between the radical species of the SPPy and the carboxylic acid species of the c‐MWCNTs. The addition of c‐MWCNTs into SPPy efficiently enhances its thermal stability and electrical conductivity. Owing to the doping effect and one‐dimensional linear structure of the c‐MWCNTs, the conductivity of SPPy/c‐MWCNT composites at room temperature is increased by two orders of magnitude by the introduction of 5 wt% c‐MWCNTs into the SPPy matrix. Copyright © 2010 Society of Chemical Industry     

Effect of covalent bonds on the mechanical properties of a multi‐walled carbon nanotube/cellulose composite

A multi‐walled carbon nanotube (MWCNT)/cellulose composite was synthesized to improve the mechanical strength of regenerated cellulose film. N,N‐carbonyldiimidazole was mixed with functionalized MWCNTs and sonicated at 60 °C for 12 h. The resulting MWCNT‐imidazolide was mixed with cellulose solution, and reacted at various temperatures for various times. The occurrence of covalent bonds between MWCNTs and cellulose was investigated using Fourier transform infrared spectroscopy and Raman spectroscopy. According to mechanical tensile tests, Young's modulus of the MWCNT/cellulose composite was found to be 11.2 GPa, an increase of approximately 110% with respect to regenerated cellulose film. Copyright © 2010 Society of Chemical Industry     

Incorporation of 4‐aminobenzene functionalized multi‐walled carbon nanotubes in polyaniline for application in formic acid electrooxidation

Incorporation of carbon nanotubes (CNTs) in conducting polymer can lead to new composites with enhanced electrical and mechanical properties. However, the development of such composites has been hampered by the inability to disperse CNTs in polymer matrix due to the lack of chemical compatibility between polymers and CNTs. Covalent sidewall functionalization of carbon nanotube provides a feasible route to incorporate carbon nanotube in polymer. In this work, 4‐aminobenzene groups were grafted onto the surface of multi‐walled carbon nanotube (MWNT) via C? C covalent bond. Polyaniline (PANI)/MWNT composites were fabricated by electrochemical polymerization of aniline containing well‐dissolved functionalized MWNTs. The obtained composites can be used as catalyst supports for electrooxidation of formic acid. Cyclic voltammogram results show that platinum particles deposited in PANI/MWNT composite films exhibit higher electrocatalytic activity and better long‐term stability towards formic acid oxidation than that deposited in pure PANI films. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Nanofibrous poly(ethylene oxide)‐based structures incorporated with multi‐walled carbon nanotube and graphene oxide as all‐solid‐state electrolytes for lithium ion batteries

Nanofibrous solid polymer electrolytes were prepared using the electrospinning method. These nanofibres were constructed from poly(ethylene oxide), lithium perchlorate and ethylene carbonate, which were incorporated with multi‐walled carbon nanotube (MWCNT) and graphene oxide (GO). The morphological properties of the as‐prepared electrolytes and the interaction between the components of the composites were characterized using scanning electron microscopy and Fourier transform infrared spectroscopy, respectively. X‐ray spectra and differential scanning calorimetry indicated an increase in amorphous regions of the nanofibrous electrolytes on addition of the fillers. However, the crystalline regions were increased on incorporation of fillers into polymeric film electrolytes. The conductivity values of the nanofibrous electrolytes reached 0.048 and 0.057 mS cm^?1 when 0.35 wt% MWCNT and 0.21 wt % GO were introduced into the nanofibrous structures, respectively. The capacity and cycling stability of the nanofibrous electrolytes were improved by incorporation of MWCNT filler. Furthermore, stress and elongation modulus were improved at low MWCNT and GO filler contents. Results revealed that the nanofibrous structures could be promising candidates as solvent‐free electrolytes applicable in lithium ion batteries. © 2019 Society of Chemical Industry     

Preparation and properties of polyvinyl chloride ultrafiltration membranes blended with functionalized multi‐walled carbon nanotubes and MWCNTs/Fe3O4 hybrids

To investigate the influence of magnetic materials combined with carbon nanotubes (CNTs) as fillers on the membrane properties, multi‐walled carbon nanotubes (MWCNTs) functionalized by mixed acids (V_H2SO4:V_HNO3=3:1) were loaded by Fe₃O₄ through a hydrothermal method. The obtained MWCNTs/Fe₃O₄ hybrids were characterized by X‐ray diffraction (XRD), Infrared spectroscopy (IR) spectrum, and scanning electron microscope (SEM) and then blended with polyvinyl chloride (PVC) to prepare ultrafiltration (UF) membranes through a phase inversion process. Simultaneously, two other UF membranes, PVC blended with acid‐treated MWCNTs and PVC blended with nothing, were also prepared. The results showed that the membrane porosity and mean pore size increased slightly with the addition of fillers. Static contact angle showed that MWCNTs/Fe₃O₄ hybrids improved the hydrophilicity of membrane surface better than the acid‐treated MWCNTs. Pure water flux increased consistently with the hydrophilicity of the membrane surface. SEM and atomic force microscope (AFM) images showed that the MWCNTs/Fe₃O₄ blended membrane formed a relatively complete pore structure throughout the cross‐section and had a rougher top surface. However, the mechanical properties of membranes with fillers were reduced compared with the pristine PVC membrane. The rejections of membranes for Bovine serum albumin (BSA), Bisphenol A (BPA), and Norfloxacin (NOR) showed that MWCNTs/Fe₃O₄ played an important role in trapping pollutants in membrane filtration. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43417.     

High cycling stability and well printability poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate)/multi‐walled carbon nanotube nanocomposites via in situ polymerization applied on electrochromic display

A high cycling stability material and an additive manufacturing method are reported for the fabrication of solid electrochromic devices. The poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate)/multi‐walled carbon nanotube (PEDOT:PSS/MWCNT) nanocomposites were synthesized via in situ polymerization. A carboxymethyl cellulose gel was used as the ink vehicle for screen printing. The electrochromic (EC) performance of films patterned by screen printing was also examined. The results of characterization indicate that strong interfacial interactions occurred between PEDOT:PSS and the MWCNTs and the MWCNTs formed a network in these conducting polymers film, so the composite was more conductive than pure PEDOT:PSS. Devices containing PEDOT:PSS/MWCNTs were more stable after 1000 cycles, exhibited higher rate of ion exchange and faster increases in current. The composite containing 0.3 wt % MWCNTs also had a 23% higher color contrast (ΔE*) than pure PEDOT:PSS at 2.5 V applied voltages. The EC inks with well printability not only can be used to print large area films, but also can print fine lines and pixel‐type dots in displays. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45943.     

Efficient functionalization of multi‐walled carbon nanotubes with p‐aminophenol and their application in the fabrication of poly(amide‐imide)‐matrix composites

The ultrasonically assisted preparation and characterization of poly(amide‐imide) (PAI) composites containing functionalized multi‐walled carbon nanotubes (MWCNTs) are reported. To improve the dispersion in and compatibility with the polymer matrix, the MWCNTs were surface‐modified with p‐aminophenol (p‐AP) under microwave irradiation. The process is fast, one‐pot, easy and results in a high degree of functionalization as well as dispersibility in organic solvents. The p‐AP‐functionalized MWCNTs (MWCNTs‐AP) were analysed by means of field emission and transmission electron microscopy, Fourier transform infrared spectroscopy, X‐ray diffraction and thermogravimetric analysis (TGA). The results consistently confirm the formation of p‐AP functionalities on MWCNTs which are able to undergo additional reactions, while the structure of the MWCNTs remains relatively intact. MWCNTs‐AP/PAI hybrid films were prepared with various MWCNTs‐AP contents (5–15 wt%) using a solution‐casting technique. Microscopic observations show that the dispersion of the MWCNTs‐AP is improved as a result of the organic groups on the MWCNT surface and functional groups in the PAI structure. The properties of the obtained composites were characterized extensively using the aforementioned techniques. TGA results show that the hybrid films exhibit a good thermal stability. Tensile mechanical testing was performed for the prepared composites, the results of which indicate an increase in the elastic modulus and tensile strength with increasing MWCNTs‐AP content. © 2013 Society of Chemical Industry     

Poly(2,6‐di(thiophene‐2‐yl)‐3,5bis(4‐(thiophene‐2‐yl)phenyl)dithieno [3,2‐b;2',3'‐d]thiophene)/carbon nanotube composite for capacitor applications

A novel monomer, 2,6‐di(thiophene‐2‐yl)‐3,5bis(4‐(thiophene‐2‐yl)phenyl)dithieno[3,2‐b;2',3'‐d]thiophene ( Th₄DTT) has been synthesized and used as an electro‐active material. It has been electropolymerized onto glassy carbon (GC) electrode in sodium dodecyl sulfate (SDS) solution (0.1 M) together with multi‐walled carbon nanotubes (MWCNT). A good capacitive characteristics for P(Th₄DTT)/MWCNT composite has been obtained by electrochemical impedance spectroscopy (EIS), which is, to our best knowledge, the first report on capacitor behavior of a dithienothiophene. A synergistic effect has been resolved by Nyquist, Bode‐magnitude—phase and admittance plots. Specific capacitance of the conducting polymer/MWCNT, calculated from cyclic voltammogram (CV) together with area and charge formulas, has been found to be 20.17 F g^?1. Long‐term stability of the capacitor has also been tested by CV, and the results indicated that, after 500 cycles, the specific capacitance is 87.37% of the initial capacitance. An equivalent circuit model of R_s(C₁(R₁(Q(R₂W))))(C₂R₃) has been obtained to fit the experimental and theoretical data. The double layer capacitance (C_dl) value of P(Th₄DTT)/MWCNT (4.43 mF cm^?2) has been found to be 25 times higher than P(Th₄DTT) (C_dl= 0.18 mF cm^?2). © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40061.     

In situ carbon deposition in polyetherimide/SAPO‐34 mixed matrix membrane for efficient CO2/CH4 separation

A simple method of pore modification complied with defect removal polymer zeolite mixed matrix membrane was developed by in situ carbon (C) deposition. The C deposition was achieved by the controlled decomposition of polymer matrix by heat treatment. In this study, polyetherimide/silicoaluminophosphate‐34 mixed matrix membrane (MMM) was fabricated on clay‐alumina support tube, followed by carbonization of the polymer matrix for gas separation application. MMM without heat treatment were also synthesized for comparison by conventional method. The membranes were characterized by X‐ray diffraction, field emission scanning electron microscopy, and X‐ray photoelectron spectroscopy. Due to carbonization, in situ C nanoparticles were deposited in to the interfacial pores, and filler particles were oriented in preferable direction. The presence of C?O, C? N, and graphitic carbon in the matrix, may be an indication of partial carbonization and restoration of adherence of polymer with substrate. The separation factor for CO₂/CH₄ achieved 39.15 with a permeance value of 23.01 × 10^?8mol/(m² s Pa) for CO₂ at 30 °C and 200 kPa feed pressure. For the first time, this work shows an improvement toward permeability of MMM by simple carbonization of polymer matrix with commendable values as compare to the reported literature. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45508.     

Cure reaction of multi‐walled carbon nanotubes/diglycidyl ether of bisphenol A/2‐ethyl‐4‐methylimidazole (MWCNTs/DGEBA/EMI‐2,4) nanocomposites: effect of carboxylic functionalization of MWCNTs

BACKGROUND: The aim of this work was to study, using differential scanning calorimetry, the effect of carboxylic functionalization of multi‐walled carbon nanotubes (MWCNTs) on the cure reaction of MWCNTs/diglycidyl ether of bisphenol A/2‐ethyl‐4‐methylimidazole (MWCNTs/DGEBA/EMI‐2,4) nanocomposites. This is important for the practical design, analysis and optimization of novel materials processing. RESULTS: Comparing the influence of non‐functionalized MWCNTs and carboxyl‐functionalized MWCNTs, it was found that, at the initial curing stage, both MWCNTs act as catalyst and COOH functionalization of MWCNTs has a catalytic effect on the curing process. Then, at the later curing stage, non‐functionalized MWCNTs prevent the occurrence of vitrification, whereas COOH functionalization of MWCNTs promotes vitrification. Non‐functionalized MWCNTs decrease the degree of curing, as evidenced by lower total heat of reaction and lower glass transition temperatures of nanocomposites compared to neat epoxy; however, COOH functionalization of MWCNTs increases the degree of curing. CONCLUSION: For the development of composites, COOH functionalization of MWCNTs could bring a positive influence to the composite process. Its acceleration of cure could help shorten pre‐cure time or lower pre‐treatment temperature, and its effect of promoting vitrification could help shorten post‐cure time or lower post‐treatment temperature. Copyright © 2009 Society of Chemical Industry     

Coating of porous silica beads by in situ polymerization/crosslinking of 2‐hydroxypropyl β‐cyclodextrin for reversed‐phase high performance liquid chromatography applications

Porous silica beads were coated with a crosslinked β‐cyclodextrin polymer by in situ polymerization/crosslinking of 2‐hydroxypropyl β‐cyclodextrin with 1,6‐hexamethylenediisocyanate in anhydrous dimethylsulfoxide. This method was developed for the preparation of reversed‐phase high performance liquid chromatography stationary phases. The mass of polymer immobilized onto the silica surface was controlled by the amount of coupling agent, 1,6‐hexamethylenediisocyanate, added during the coating process. The influence of the polymer coating on the physical features of the beads was investigated by means of nitrogen adsorption/desorption methods, scanning electron microscopy and energy dispersion X‐ray analysis. The column lifetime was found to be primarily dependent on the extent of crosslinking of the stationary phase. Moreover, it was demonstrated that the synthesis of highly crosslinked stationary phases with a reasonable column lifetime gave rise to a phase separation of the β‐cyclodextrin polymer. To prove their usefulness as reversed‐phase packing materials, they were used to separate mixtures of nitrophenol positional isomers, four pesticides, and drugs. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1419–1426, 2004     

A facile route to develop electrical conductivity with minimum possible multi‐wall carbon nanotube (MWCNT) loading in poly(methyl methacrylate)/MWCNT nanocomposites

Today, we stand at the threshold of exploring carbon nanotube (CNT) based conducting polymer nanocomposites as a new paradigm for the next generation multifunctional materials. However, irrespective of the reported methods of composite preparation, the use of CNTs in most polymer matrices to date has been limited by challenges in processing and insufficient dispersability of CNTs without chemical functionalization. Thus, development of an industrially feasible process for preparation of polymer/CNT conducting nanocomposites at very low CNT loading is essential prior to the commercialization of polymer/CNT nanocomposites. Here, we demonstrate a process technology that involves in situ bulk polymerization of methyl methacrylate monomer in the presence of multi‐wall carbon nanotubes (MWCNTs) and commercial poly(methyl methacrylate) (PMMA) beads, for the preparation of PMMA/MWCNT conducting nanocomposites with significantly lower (0.12 wt% MWCNT) percolation threshold than ever reported with unmodified commercial CNTs of similar qualities. Thus, a conductivity of 4.71 × 10^?5 and 2.04 × 10^?3 S cm^?1 was achieved in the PMMA/MWCNT nanocomposites through a homogeneous dispersion of 0.2 and 0.4 wt% CNT, respectively, selectively in the in situ polymerized PMMA region by using 70 wt% PMMA beads during the polymerization. At a constant CNT loading, the conductivity of the composites was increased with increasing weight percentage of PMMA beads, indicating the formation of a more continuous network structure of the CNTs in the PMMA matrix. Scanning and transmission electron microscopy studies revealed the dispersion of MWCNTs selectively in the in situ polymerized PMMA phase of the nanocomposites. Copyright © 2012 Society of Chemical Industry     

A facile synthesis of a novel three‐phase nanocomposite: Single‐wall carbon nanotube/silver nanohybrid fibers embedded in sulfonated polyaniline

A three‐phase water‐soluble nanocomposite of single wall carbon nanotube/silver nanoparticle hybrid fibers embedded in sulfonated polyaniline has been synthesized by a simple chemical solution mixing process. The nanocomposite has been characterized by high resolution electron microscopy, X‐ray diffractometry, FTIR spectroscopy, Raman spectroscopy, and thermogravimetric analysis. Optical and electrical characteristics of the nanocomposite have been determined by UV–vis absorption spectroscopy, photoluminescence spectroscopy, and four‐probe electrical conductivity measurement. A surface plasmon absorption band obtained around 460 nm indicates the presence of silver nanoparticles in the composite. The optical band gap calculation for sulfonated polyaniline vis‐a‐vis the nanocomposite supported the conductivity measurement. Over 1300 times increase in DC electrical conductivity has been observed for the three‐phase nanocomposite, with a filler loading of 20 wt %, at 306 K. This observation could be explained by Mott's variable range hopping model considering a three‐dimensional conduction. Such a nanocomposite has immense potential for use as a cathode material in lithium‐ion batteries and supercapacitors. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41692.