Synergistic corrosion behavior of coated Ti60 alloys with NaCl deposit in moist air at elevated temperature

In the present paper, the corrosion behavior of Ti60 alloys with an aluminide, TiAlCr, and enamel coatings in moist air containing NaCl vapor at 700-800 °C were studied. The results showed that the TiAlCr and aluminide coatings failed to protect the substrate from corrosion due to the cyclic formation of volatile products during corrosion at 800 °C. However, an uneven continuous protective Al₂O₃ scale could form on the aluminide coating during corrosion at 700 °C. And the enamel coating could protect Ti60 from corrosion due to its high thermochemical stability and matched thermal expansion coefficient with substrates of Ti-base alloys during corrosion.     

Effect of cracking in diffusion aluminide coatings on their cyclic oxidation performance on Ti-based IMI-834 alloy

Diffusion aluminide coatings improve the high temperature oxidation resistance of Ti-alloys. This study evaluates the oxidation resistance of a Al₃Ti type aluminide coating and a Pt-aluminide coating on Ti-alloy IMI-834, at 650, 750 and 850 °C under cyclic oxidation conditions in air. Both coatings provide good oxidation resistance, however, the extent of through-thickness cracking in coating and localized oxidation degradation of substrate increases with thermal cycling. At high temperature of 850 °C, TiO₂ outgrowths emanate from these cracks, resulting in a prominent mud-crack pattern on the surface. The possible effect of such cracking on long-term oxidation properties of coatings has been discussed.     

Preparation and hot corrosion behaviour of an Al-gradient NiCoCrAlYSiB coating on a Ni-base superalloy

A gradient NiCoCrAlYSiB coating was prepared on a Ni-base superalloy using arc ion plating (AIP) and subsequent gaseous phase aluminisation techniques. Hot corrosion of normal NiCoCrAlYSiB and the gradient coating in pure Na₂SO₄ and Na₂SO₄/NaCl (75:25, wt./wt.) salts was performed at 900 °C in static air. The corrosion results indicated an enhanced corrosion resistance to both salts for the gradient NiCoCrAlYSiB coating, which the improved performance of it should be attributed to the β aluminide ‘‘pool” at the surface layer. By partially sacrificing Al₂O₃ (i.e. Al), the gradient NiCoCrAlYSiB coating specimen behaved excellently in the two kinds of salts. The grain growth during the gaseous phase aluminisation and the corrosion mechanism, including the role NaCl played in the mixture salt corrosion, are discussed.     

Unusual oxidation behaviour of Zr50Cu50 alloy at high temperatures

The oxidation of Zr₅₀Cu₅₀ alloy at 500-700 °C is characterized by preferential oxidation of zirconium, while the excess of copper is accumulated at the alloy-oxide interface forming the Zr₁₄Cu₅₁ phase. The strong reaction at 800 and 850 °C resulted in the total corrosion of the specimens in 21 and 15 h, respectively. The oxidation at elevated temperatures showed an anomalous decrease of the oxygen consumption rate in the temperature range 930-1000 °C, corresponding to the preferentially oriented crystallites of ZrO₂ in the oxide scale at 900 and 1000 °C. The oxide layer consists of ZrO₂ and CuO in the whole temperature interval of the oxidation. The reaction kinetics obeys a parabolic rate law. An activation energy of 92.0 ± 0.3 kJ/mol has been estimated.     

Cyclic oxidation behaviour of electrodeposited Ni3Al-CeO2 base coatings at 1050 °C

This paper presents the cyclic oxidation behaviour of electrodeposited pure, nano CeO₂ (9-15 nm)- and micron CeO₂ (5 μm)-modified Ni₃Al coatings on Fe-Ni-Cr substrate at 1050 °C for periods up to 500 h. The pure Ni₃Al coating had a marginal resistance to cyclic oxidation at 1050 °C, while the CeO₂-dispersed Ni₃Al coatings showed much better cyclic oxidation resistance. This difference was attributed to many beneficial effects of CeO₂ including changing the growth mechanism of α-Al₂O₃ scale, reducing the growth rate of the scale, improving mechanical properties of the scale, and reducing void formation at the scale/coating interface and at the scale-grain boundaries.     

Corrosion study of HK-40m alloy exposed to molten sulfate/vanadate mixtures using the electrochemical noise technique

Corrosion performance of HK-40m alloy obtained from electrochemical noise technique and polarization curves during 24 h of exposure in high sulfate (80 mol% Na₂SO₄-20 mol% V₂O₅) and high vanadate (80 mol% V₂O₅-20 mol% Na₂SO₄) molten salts at 700 °C are reported. Electrochemical noise signals were analyzed in the time and frequency domain. A statistical analysis obtaining the resistance noise, the current standard deviation and the localization index are presented as well as the determination of corrosion rates. Corrosion rates were supported by X-ray diffraction analysis of corrosion products and scanning electron microscopy analysis of corroded samples. Results from optical microscope examination of the corroded samples showed that HK-40m alloy suffered inter-granular corrosion when was exposed to the high vanadate salt, whereas exposed to the high sulfate salt, HK-40m corroded through a mixed corrosion process. A corrosion mechanism of HK-40m alloy was obtained together with the corrosion rate, showing the different behavior when exposing the alloy to a high vanadate and high sulfate molten salts.     

Electrochemical study on hot corrosion of Si-modified aluminide coated In-738LC in Na2SO4-20 wt.% NaCl melt at 750 °C

The corrosion performance of the slurry Si-modified aluminide coating on the nickel base superalloy In-738LC exposed to low temperature hot corrosion condition has been investigated in Na₂SO₄-20 wt.% NaCl melt at 750 °C by combined use of the anodic polarization and characterization techniques.The coated specimen showed a passive behavior up to −0.460 V vs. Ag/AgCl (0.1 mol fraction) reference electrode, followed by a rapid increase in anodic current due to localized attack in the higher potential region. In the passive region, the anodic dissolution of constituents of the coating occurred through the passive film, probably SiO₂, at slow rate of 20-30 μA/cm². The passive current for the Si-modified coating was two orders of magnitude smaller than that for bare In-738LC, which is known as Cr₂O₃ former in this melt. This indicates that the SiO₂ film is chemically more stable than Cr₂O₃ film under this condition. However, pitting-like corrosion commenced around −0.460 V and proceeded at the high rate of 100 mA/cm² in the higher potential region than +0.400 V. The corrosion products formed on the coating polarized in different anodic potentials were characterized by SEM, EDS and XRD. It was found from the characterization that oxidation was dominant attack mode and no considerable sulfidation occurred at 750 °C. The SiO₂ oxide was not characterized in the passive region because the thickness of the passive film was extremely thin, but was detected as the primary oxide in the localized corrosion region, where the selective oxidation of Al was observed by further progress of the corrosion attack front into the inner layer of coating.     

Temperature and water vapour effects on the cyclic oxidation behaviour of Fe-Cr alloys

Binary Fe-Cr alloys were subjected to cyclic oxidation at 600, 700 and 950 °C in flowing gases of Ar-20O₂ and Ar-20O₂-5H₂O (vol.%). The minimum chromium concentration required to achieve protective scale growth decreased as temperature increased from 600 to 700 °C. This change is attributed to faster chromium diffusion at higher temperature. Conversely, this minimum chromium level increased when the temperature was raised from 700 to 950 °C. This is attributed to faster scale growth, leading to its rapid mechanical failure, along with formation of slow-diffusing austenite. Water vapour accelerated scaling, leading to a need for higher chromium concentrations to resist breakaway oxidation.     

The influence of relative humidity and temperature on the acetic acid vapour-induced atmospheric corrosion of lead

The acetic-acid induced atmospheric corrosion of lead was studied at 22.0 °C and 30-95% RH and at 4 °C and 95% RH. The samples were exposed to synthetic air with careful control of relative humidity, temperature, acetic acid concentration (170 ppb) and flow conditions. Reference exposures were carried out in clean humid air. Samples were analysed by gravimetry, ion chromatography, quantitative carbonate analysis, ESEM and XRD. Traces of acetic acid vapour strongly accelerate the atmospheric corrosion of lead. The corrosion rate is only weakly dependent on relative humidity in the range 95-50% RH. The accumulated amount of acetate is independent of RH in the range 95-40%. Lead corrosion in humid air in the presence of acetic acid vapour exhibits a negative correlation with temperature. The crystalline corrosion products formed on lead in the presence of acetic acid vapour were lead acetate oxide hydrate (Pb(CH₃COO)₂ · 2PbO · H₂O) and massicot (β-PbO) together with plumbonacrite (Pb₁₀O(CO₃)₆(OH)₆) or hydrocerussite (Pb₃(CO₃)₂(OH)₂). The transformation of lead acetate oxide hydrate into hydrocerussite and vice versa was also studied. The mechanism of corrosion is addressed, and the implications of this study for combating the corrosion of lead organ pipes in historical organs are discussed.     

High temperature corrosion properties of ionic liquids

The corrosion behaviour of several metals and metal alloys (copper, nickel, AISI 1018 steel, brass, Inconel 600) exposed to a typical ionic liquid, the 1-butyl-3-methyl-imidazolium bis-(trifluoromethanesulfonyl) imide, ([C₄mim][Tf₂N]), has been investigated by electrochemical and weight-loss methods. Corrosion current densities have been determined by extrapolation from Tafel plots and by polarization resistance measurements and 48 h immersion tests were performed at 150, 250, 275 and 325 °C. Room temperature results show low corrosion current densities (0.1-1.2 μA/cm²) for all the metals and alloys investigated. At 70 °C, the corrosion current for copper dramatically increases showing a strongly dependence on temperature. At 150 °C copper shows significant weight-loss while nickel, AISI 1018, brass and Inconel do not. At higher temperatures (?275 °C), the copper sample crumbles and localized corrosion occurs for the other metals and alloys.     

Hot corrosion behaviour of Yb2Zr2O7 ceramic coated with V2O5 at temperatures of 600-800 °C in air

To better understand the hot corrosion behaviour of Yb₂Zr₂O₇ ceramic in molten V₂O₅, hot corrosion experiments were performed in a temperature range of 600-800 °C in air. Different reaction products of ZrV₂O₇, YbVO₄ and m-ZrO₂ were identified depending upon the hot corrosion conditions, for example, ZrV₂O₇ and YbVO₄ at 600 °C for 2 h and 8 h; ZrV₂O₇, m-ZrO₂ and YbVO₄ at 700 °C for 2 h; m-ZrO₂ and YbVO₄ either at 800 °C for 2 h or at 700-800 °C for 8 h. The hot corrosion reaction mechanisms were further discussed based on the thermal instability of ZrV₂O₇ at elevated temperatures.     

Oxidation of iron at 400-600 °C in dry and wet O2

The oxidation of iron in dry and wet O₂ at 400-600 °C has been re-investigated using gravimetry, SEM/EDX, XRD and FIB. In the presence of O₂, water vapour accelerates iron oxidation at 500 and 600 °C. At 400 and 500 °C the magnetite layer is duplex and exposure to water vapour results in the formation of blades on top of a fine-grained hematite layer. At 600 °C it results in a surface without needles and blades. The increased oxidation rate at 500 and 600 °C is attributed to a smaller grain size in the hematite layer resulting in faster ion transport.     

Improving the high-temperature oxidation resistance of a β-γ TiAl alloy by a Cr2AlC coating

A Cr₂AlC coating was deposited on a β-γ TiAl alloy. Isothermal oxidation tests at 700 °C and 800 °C, and thermocyclic oxidation at 800 °C were performed in air. The results indicated that serious oxidation occurred on the bare alloy. Thick non-protective oxide scales consisting of mixed TiO₂ + α-Al₂O₃ layers formed on the alloy surface. The coated specimens exhibited much better oxidation behaviour by forming an Al-rich oxide scale on the coating surface during the initial stages of oxidation. This scale acts as diffusion barrier by effectively blocking the ingress of oxygen, and effectively protects the coated alloys from further oxidation.     

Effect of Ce and La additions in low temperature aluminization process by CVD-FBR on 12%Cr ferritic/martensitic steel and behaviour in steam oxidation

Two different coatings based of iron aluminide on 12% Cr ferritic-martensitic steel have been developed by CVD-FBR technique, which is modified by the introduction of Ce and La as powder in the fluidized bed. These elements change the gaseous environment, which composition is predicted by a thermodynamic approximation. Partial pressures of all gaseous precursors are drastically modified; in consequence AlCl has the highest partial pressure in the system leading to an increment of the coating thickness. Coatings are composed by (Fe, Cr)₂Al₅ or (Fe, Cr)₂Al₅ and (Fe, Cr)Al₃ intermetallic phases. On the other hand, steam oxidation test at 650 °C was performed in order to observe improvements in the HCM12A oxidation resistant.     

Early high temperature oxidation behaviour of Ti(C,N)-based cermets in air

Isothermal oxidation behaviour of two Ti(C,N)-based cermets (TiC-10TiN-16Mo-6.5WC-0.8C-0.6Cr₃C₂-(32-x)Ni-xCr, x = 0 and 6.4 wt%) was investigated in air at 800-1100 °C up to 2 h. Mass gains exhibited neither linear nor parabolic law during isothermal oxidation. The oxide scales formed at 800-1100 °C were multi-layered, consisting of NiO outerlayer, NiTiO₃ interlayer and TiO₂-based innerlayer. The internal oxidation zones formed at 1000-1100 °C consisted of Ti-based, Ni-based and Mo-based complex oxides. Cermet with 6.4 wt% Cr exhibited superior oxidation resistance, due to the presences of Cr_0.17Mo_0.83O₂ in TiO₂-based innerlayer of the oxide scale and Cr-rich Ti-based complex oxide in the internal oxidation zone.     

Electrochemical behaviour of Ni-base alloys exposed under oil/gas field environments

The electrochemical behaviour of Ni-base alloys (Inconel 625, Inconel 718, G3 and Incoloy 825) is carried out at 80 °C in CO₂/H₂S corrosion environments using cyclic potentiodynamic polarisation and electrochemical impedance spectroscopy (EIS) techniques. The passivity mechanisms are analysed and discussed. In addition, some significant characterisation parameters such as E_corr, I_pass, E_pit, E_pp, ΔE and I_pass in cyclic polarisation curves are analysed and compared to reveal the corrosion resistance of various Ni-base alloys. The equivalent circuit model and ZsimpWin software are utilised to discuss the Nyquist plots of various Ni-base alloys. The diffusion mechanism in EIS measurement is discussed. The result shows that the corrosion resistance of the Ni-base alloys to CO₂ corrosion or CO₂/H₂S corrosion follows the sequence: Inconel 625 > G3 > Inconel 718 > Incoloy 825. H₂S works as a cathodic depolariser with accelerating initiation of the corrosion process.     

Microstructural evolution of coating-modified 3D C/SiC composites after annealing in wet oxygen at different temperatures

Two types of coating-modified 3D C/SiC, coated with CVD SiC/SiC/SiC (type I) and CVD SiC/amorphous-BC/SiC (type II), are subjected to a 14 vol.% H₂O/8 vol.% O₂/78 vol.% Ar atmosphere at 700, 1000 and 1200 °C up to 100 h. Microstructure and corrosion behaviour are investigated using a variety of characterization techniques. The type II shows a better oxidation resistance than type I during annealing at relatively low temperatures. Nevertheless, residual strength of the type I annealed above 1000 °C is enhanced by healing of many micron-sized defects. Interfacial bond strength of the composites is reasonably improved after annealing.     

Effect of lamellar microstructure on oxidation kinetics of Fe3Al sintered by hot isostatic pressing

The present paper focuses on the investigation of the relationship between microstructure of Fe₃Al prepared by hot isostatic pressing (HIP) and kinetics of alumina layer formation during oxidation at 900 °C, 1000 °C and 1100 °C. As prepared HIPed Fe₃Al sample reveals lamellar microstructure with inhomogeneous Al distribution which originates from the preliminary mechanical activation of Fe-Al mixture. At 900 °C, Fe₃Al oxidation is characterized by selective growth of very rough alumina layer containing only transient aluminium oxides. In addition to these transient oxides, α-Al₂O₃ stable phase is formed at 1000 °C. At the highest temperature (1100 °C), continuous and relatively smooth alumina layer mainly contains fine crystallites of α-Al₂O₃. The initial lamellar structure and phase inhomogeneity in as-HIPed Fe₃Al samples are supposed to be the main factors that determine observed peculiarities after Fe₃Al oxidation at 900 °C and 1000 °C.     

Microstructure and corrosion behaviour of pulsed plasma-nitrided AISI H13 tool steel

The effect of pulsed plasma nitriding temperature and time on the pitting corrosion behaviour of AISI H13 tool steel in 0.9% NaCl solutions was investigated by cyclic polarization. The pitting potential (E_pit) was found to be dependent on the composition, microstructure and morphology of the surface layers, whose properties were determined by X-ray diffraction and scanning electron microscopy techniques. The best corrosion protection was observed for samples nitrided at 480 °C and 520 °C. Under such experimental conditions the E_pit-values shifted up to 1.25 V in the positive direction.     

Cyclic oxidation of an ultrafine-grained and CeO2-dispersed δ-Ni2Al3 coating

A novel ultrafine-grained and CeO₂-dispersed δ-Ni₂Al₃ coating was fabricated through aluminizing a CeO₂-nanoparticle-dispersed nanocrystalline Ni matrix film using an NH₄Cl-activated pack cementation method at 600 °C. Two CeO₂-free δ-Ni₂Al₃ coatings, one coarse-grained and the other ultrafine-grained, were also prepared. Compared with the later, the ultrafine-grained and CeO₂-dispersed coating profoundly increased scale spalling resistance during cyclic oxidation in air at 1000 °C. The dispersed CeO₂, together with the ultrafine-grained coating structure, helped prevent the formation of cavities at the scale/coating interface, which was proposed as a main cause for improvement of the cyclic oxidation resistance.