Synergistic effect of iodide ion and polyacrylic acid on corrosion inhibition of iron in H2SO4 investigated by electrochemical techniques

Corrosion inhibition of iron in H₂SO₄ by polyacrylic acid (PAA) was investigated using electrochemical techniques at 30 °C. Results obtained indicate that PAA inhibited the corrosion of iron in the acid medium. Inhibition efficiency increases with increase in PAA concentration and synergistically enhanced on addition of iodide ions. Potentiodynamic polarization results suggest that PAA functions as a modest cathodic inhibitor. The adsorption of PAA onto the iron surface followed Temkin adsorption isotherm. FTIR analysis revealed that the synergistic effect due to co-adsorption of iodide ions and PAA is co-operative in nature.     

Inhibitive properties, thermodynamic and quantum chemical studies of alloxazine on mild steel corrosion in H2SO4

Alloxazine (ALLOX) was tested as corrosion inhibitor for mild steel in 0.5 M H₂SO₄ solution using non-electrochemical technique (gravimetric and UV–Visible spectrophotometric measurements) at 303–333 K. ALLOX acts as inhibitor for mild steel in acidic medium. Inhibition efficiency increases with increase in concentration of ALLOX but decrease with rise in temperature. The adsorption of ALLOX was found to follow Temkin adsorption isotherm model. Both the activation and thermodynamic parameters governing the adsorption process were calculated and discussed. The adsorption follows a first-order kinetics. DFT study gave further insight into the mechanism of inhibition action of ALLOX.     

Inhibitive and adsorption behaviour of carboxymethyl cellulose on mild steel corrosion in sulphuric acid solution

Chemical methods were used to assess the inhibitive and adsorption behaviour of carboxymethyl cellulose (CMC) for mild steel in H₂SO₄ solution at 30-60 °C. Results obtained show that CMC act as inhibitor for mild steel in H₂SO₄. The inhibition efficiency was found to increase with increase in CMC concentration but decreased with rise in temperature, which is suggestive of physical adsorption mechanism. The adsorption of the CMC onto the mild steel surface was found to follow Langmuir and Dubinin-Radushkevich adsorption isotherm models. The inhibition mechanism was further corroborated by the values of activation parameters obtained from the experimental data.     

Synergistic inhibition effect of 6-benzylaminopurine and iodide ion on the corrosion of cold rolled steel in H3PO4 solution

The synergistic inhibition effect of 6-benzylaminopurine (BAP) and iodide ion (I⁻) on the corrosion of cold rolled steel (CRS) in 1.0 M H₃PO₄ solution was studied by weight loss, potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS) methods. The results show that BAP has a moderate inhibitive effect. However, incorporation of BAP with I⁻ improves the inhibition performance significantly. The adsorption of BAP in the absence and presence of I⁻ obeys Langmuir adsorption isotherm. BAP and BAP/I⁻ mixture act as mixed-type inhibitors. A probable synergism mechanism is proposed.     

Copper corrosion inhibition in O2-saturated H2SO4 solutions

Corrosion inhibition of copper in O₂-saturated 0.50 M H₂SO₄ solutions by four selected amino acids, namely glycine (Gly), alanine (Ala), valine (Val), or tyrosine (Tyr), was studied using Tafel polarization, linear polarization, impedance, and electrochemical frequency modulation (EFM) at 30 °C. Protection efficiencies of almost 98% and 91% were obtained with 50 mM Tyr and Gly, respectively. On the other hand, Ala and Val reached only about 75%. Corrosion rates determined by the Tafel extrapolation method were in good agreement with those obtained by EFM and an independent chemical (i.e., non-electrochemical) method. The chemical method of confirmation of the corrosion rates involved determination of the dissolved Cu²⁺, using ICP-AES (inductively coupled plasma atomic emission spectrometry) method of chemical analysis. Nyquist plots exhibited a high frequency depressed semicircle followed by a straight line portion (Warburg diffusion tail) in the low-frequency region. The impedance data were interpreted according to two suitable equivalent circuits. The kinetics of dissolved O₂ reduction and hydrogen evolution reactions on copper surface were also studied in O₂-saturated 0.50 M H₂SO₄ solutions using polarization measurements combined with the rotating disc electrode (RDE). The Koutecky-Levich plot indicated that the dissolved O₂ reduction at the copper electrode was an apparent 4-electron process.     

Three pyrazine derivatives as corrosion inhibitors for steel in 1.0 M H2SO4 solution

The inhibition effect of three pyrazine derivatives of 2-methylpyrazine (MP), 2-aminopyrazine (AP) and 2-amino-5-bromopyrazine (ABP) on the corrosion of cold rolled steel (CRS) in 1.0 M H₂SO₄ solution was studied by weight loss, potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS) methods. The results show that all pyrazine compounds are good inhibitors, and inhibition efficiency follows the order: ABP > AP > MP. The adsorption of each inhibitor on CRS surface obeys Langmuir adsorption isotherm. For all these pyrazine derivatives, they act as mixed-type inhibitors. The probable inhibitive mechanism is proposed from the viewpoint of adsorption theory.     

Synergistic inhibition effect of rare earth cerium(IV) ion and anionic surfactant on the corrosion of cold rolled steel in H2SO4 solution

The synergistic inhibition effect of rare earth cerium(IV) ion and anionic surfactant of sodium oleate (C₁₇H₃₃-COONa, SO) on the corrosion of cold rolled steel (CRS) in H₂SO₄ solution was first investigated by weight loss and potentiodynamic polarization methods. The results revealed that SO had a moderate inhibitive effect, and the adsorption of SO obeyed the Freundlich adsorption isotherm. For the cerium(IV) ion, it had a negligible effect. However, incorporation of Ce⁴⁺ with SO significantly improved the inhibition performance, and produced strong synergistic inhibition effect. Depending on the results, the synergism mechanism was proposed.     

Corrosion inhibition of mild steel by ethylamino imidazoline derivative in CO2-saturated solution

The corrosion inhibition and adsorption behaviour of 2-undecyl-1-ethylamino imidazoline (2UEI) on N80 mild steel in CO₂-saturated 3% NaCl solutions was investigated using potentiodynamic polarization, electrochemical impedance spectroscopy techniques and SEM observation. Inhibitor efficiency increased with increase in 2UEI concentration. Temperature studies revealed an increase in inhibition efficiency with rise in temperature and corrosion activation energies decreased in the presence of 2UEI. A mechanism of chemical adsorption of 2UEI on the metal’s surface is proposed. The adsorption characteristics of the inhibitor were approximated by Temkin isotherm. The inhibition efficiency of 2UEI was enhanced in the presence of iodide ions.     

Inhibition effect of 6-benzylaminopurine on the corrosion of cold rolled steel in H2SO4 solution

The inhibition effect of 6-benzylaminopurine (BAP) on the corrosion of cold rolled steel (CRS) in 1.0-7.0 M H₂SO₄ at 25-50 °C was studied by weight loss and potentiodynamic polarization methods. Fourier transform infrared spectroscopy (FTIR) and atomic force microscope (AFM) were used to characterize the CRS surface. The results showed that BAP was a good inhibitor in 1.0 M H₂SO₄, and the adsorption of BAP obeyed the Temkin adsorption isotherm. Polarization curves showed that BAP acted as a mixed-type inhibitor in sulfuric acid. Depending on the results, the inhibitive mechanism was proposed.     

Synergistic inhibition behaviour of methylbenzyl quaternary imidazoline derivative and iodide ions on mild steel in H2SO4 solutions

The inhibition behaviour of 2-undecyl-1-ethylamino-1-methylbenzyl quaternary imidazoline (2UMQI) and KI on mild steel in 1.0 M H₂SO₄ solutions was investigated at 25 °C using electrochemical methods. The results indicated that 2UMQI inhibited the corrosion of mild steel and the extent of inhibition increased with 2UMQI concentrations. The inhibition action in the presence of 2UMQI is due to physical adsorption of 2UMQI. A mixed-inhibition mechanism is proposed for the inhibitive effects of 2UMQI. Inhibition efficiency of 2UMQI was enhanced by the addition of iodide ions. In the presence of KI, the potentials of unpolarization, E_u was observed and increased with KI concentration.     

Synergistic effect of halide ions on improving corrosion inhibition behaviour of benzisothiozole-3-piperizine hydrochloride on mild steel in 0.5 M H2SO4 medium

The synergistic effect of iodide ions and benzisothiozole-3-piperizine hydrochloride (BITP) on corrosion inhibition of mild steel in 0.5 M H₂SO₄ solution has been studied by both chemical and electrochemical methods. The corrosion performance of BITP in 1.0 M HCl and 0.5 M H₂SO₄ media was examined and compared. The adsorption of BITP and its combination with iodide ions on mild steel surface followed Langmuir adsorption isotherm via chemisorption mechanism. The calculated values of synergism parameter (S_θ) were found to be greater than unity. This result clearly showed the existence of synergism between iodide ions and BITP molecules.     

Experimental and theoretical calculations on corrosion inhibition of steel in 1 M H2SO4 by crown type polyethers

The corrosion inhibitive efficiencies of two crown type polyethers, namely dibenzo-bis-imino crown ether (C-1) and dibenzo-diaza crown ether (C-2), which are macrocyclic Schiff base and its reduced form (macrocyclic amine), respectively, for the steel in 1 M H₂SO₄ have been investigated by Tafel extrapolation and linear polarization methods. Corrosion and adsorption isotherm parameters were determined from current-potential curves. The studies show that C-1 and C-2 inhibit the corrosion of the steel in H₂SO₄ solution. Semiempirical AM1 method was used for theoretical calculations. The obtained results of these calculations for the compounds were found to be consistent with the experimental findings.     

Evaluation of the inhibitive effect of some plant extracts on the acid corrosion of mild steel

Corrosion inhibition of mild steel in 2 M HCl and 1 M H₂SO₄ by extracts of selected plants was investigated using a gasometric technique at temperatures of 30 and 60 °C. The studied plants materials include leaf extracts Occimum viridis (OV), Telferia occidentalis (TO), Azadirachta indica (AI) and Hibiscus sabdariffa (HS) as well as extracts from the seeds of Garcinia kola (GK). The results indicate that all the extracts inhibited the corrosion process in both acid media by virtue of adsorption and inhibition efficiency improved with concentration. Synergistic effects increased the inhibition efficiency in the presence of halide additives. Inhibition mechanisms were deduced from the temperature dependence of the inhibition efficiency as well as from assessment of kinetic and activation parameters that govern the processes. Comparative analysis of the inhibitor adsorption behaviour in 2 M HCl and 1 M H₂SO₄ as well as the effects of temperature and halide additives suggest that both protonated and molecular species could be responsible for the inhibiting action of the extracts.     

Corrosion mechanism of Mo/Nd16Fe71B13/Mo film in a simulated marine atmosphere

This study describes the corrosion mechanism of Mo/Nd₁₆Fe₇₁B₁₃/Mo film induced by sodium chloride particles in 80% relative humidity (RH) environment. The deliquescence of sodium chloride particles on the Mo/Nd₁₆Fe₇₁B₁₃/Mo film caused the step by step attacks. Initial loosening of the Mo layer allows permeation of electrolyte into Nd–Fe–B layer, resulting in cavitations of electrolyte and subsequent film failure. The second failure step involves corrosion of Nd element in the Nd–Fe–B layer, with Fe element remaining beneath the corrosion product. Corrosion of Fe constitutes the third-step failure, forming a mixture of Nd and Fe corrosion product.     

Pitting corrosion of artificially aged T6 AA2024/SiCp composites in 3.5 wt.% NaCl aqueous solution

The pitting corrosion behavior of the underaged (UA), peakaged (PA) and overaged (OA) T6 AA2024/0, 8, 14, 19, 24 vol.% 40 μm SiC_p(particles) composites was studied. The processing route used for the materials was the compocasting technique. Corrosion potentials (E_cor), pitting potentials (E_pit) as well as protection potentials (E_prot) were extracted from Double Cycle Polarization (DCP) curves contacted in aerated 3.5 wt.% NaCl aqueous solution. In addition 40 days immersion tests carried out and weight loss curves as well as total pit depth measurements were acquired. Pitting initiation and propagation as the main corrosion mechanism was driven by the aging kinetics which is ruled by the reduction in the retained vacancy concentration and at the same time by the increase in dislocation density as SiC_p volume fraction increases. Thus, alteration in pitting behavior among composites of different SiC_p content took place, although their ageing status was exactly the same.     

Corrosion inhibition during synthesis of Cu2O nanoparticles by 1,3-diaminopropylene in solution

Corrosion inhibition for Cu₂O nanoparticles in solution using the regulators of 1,3-dimorpholinpropylene and 1,3-diethylaminopropylene was studied by experimental and theoretical calculation methods. The inhibition mechanism of regulators was related to the arrangement of cetyltrimethylammonium (CTAB) molecules on the surface of Cu₂O nanoparticles. Control of the type and amount of regulators has been demonstrated to produce well-dispersed and active Cu₂O nanoparticles (∼100 nm). The oxidation temperature of Cu₂O nanoparticles decreased from 297.9-404.4 °C (blank) to 232.3-334.3 °C (containing regulator). For 1,3-dimorpholinpropylene, its arc structure and active sites (C_4C_5, N_2 and O_2) facilitate the formation of stable protective film over Cu₂O surface.     

Alizarin violet 3B as a novel corrosion inhibitor for steel in HCl, H2SO4 solutions

The inhibition effect of alizarin violet 3B (AV3B) on the corrosion of cold rolled steel (CRS) in 1.0 M HCl and 0.5 M H₂SO₄ solutions was investigated for the first time by weight loss, potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS) methods. The results show that AV3B is a good inhibitor, and exhibits more efficient in 1.0 M HCl than 0.5 M H₂SO₄. The adsorption of AV3B on CRS surface obeys Langmuir adsorption isotherm in both acids. Polarization curves reveal that AV3B acts as a mixed-type inhibitor.     

Triazolyl blue tetrazolium bromide as a novel corrosion inhibitor for steel in HCl and H2SO4 solutions

The inhibition effect of triazolyl blue tetrazolium bromide (TBTB) on the corrosion of cold rolled steel (CRS) in 1.0 M HCl and 0.5 M H₂SO₄ solution was investigated for the first time by weight loss, potentiodynamic polarization curves, and electrochemical impedance spectroscopy (EIS) methods. The results show that TBTB is a very good inhibitor, and is more efficiency in 1.0 M HCl than 0.5 M H₂SO₄. The adsorption of TBTB on CRS surface obeys Langmuir adsorption isotherm. Polarization curves reveal that TBTB acts as a mixed-type inhibitor in both acids.     

Inhibitive properties, adsorption and a theoretical study of 3,5-bis(n-pyridyl)-4-amino-1,2,4-triazoles as corrosion inhibitors for mild steel in perchloric acid

Corrosion inhibition of mild steel in molar perchloric acid by 3,5-bis(n-pyridyl)-4-amino-1,2,4-triazoles (n-PAT, n = 2, 3 and 4) was studied at 30 °C using gravimetric and electrochemical impedance spectroscopy techniques. Protection efficiencies of 95% and 92% were obtained with 12 × 10⁻⁴ M of 3-PAT and 4-PAT, respectively; while 2-PAT reached only 65%. The inhibiting properties of n-PAT were found to depend on the concentration and the order of increasing inhibition efficiency was correlated with the modification of the position of the nitrogen atom in the pyridinium substituent. It was shown that adsorption of 4-aminotriazole derivatives on the steel surface is consistent with the Langmuir adsorption isotherm and the obtained standard free energy of adsorption () values indicate that the corrosion inhibition of the mild steel in 1 M HClO₄ is depends on both physic-and chemisorption. A significant correlation is obtained between inhibition efficiency and quantum chemical parameters using semi-empirical quantitative structure-activity relationships (QSAR) approach.