A theoretical study of some hydroxamic acids as corrosion inhibitors for carbon steel

The corrosion inhibition characteristics of two hydroxamic acids, i.e., oxalyl-dihydroxamic acid (C2) and pimeloyl-1,5-di-hydroxamic acid (C7), on carbon steel has been studied using density functional theory (DFT). Quantum chemical parameters such as highest occupied molecular orbital energy (E_HOMO), lowest unoccupied molecular orbital energy (E_LUMO), and energy gap (ΔE) have been calculated using B3LYP/6-31 + G∗∗ basis set. The relationship between the inhibition efficiency and quantum chemical parameters has been discussed in order to elucidate the inhibition mechanism of these compounds.     

Corrosion control of copper in nitric acid solutions using some amino acids - A combined experimental and theoretical study

Inhibition performance of three amino acids, namely l-methionine (MIT), l-methionine sulfoxide (MITO) and l-methionine sulfone (MITO2), as corrosion-safe inhibitors for copper surface in 1.0 M nitric acid was investigated by weight loss, dc polarization and ac impedance techniques. A significant decrease in the corrosion rate of copper was observed in the presence of the investigated compounds. The reactivates of the compounds under investigation were analyzed through Fukui functions, to explain their inhibition performance. Simulation techniques incorporating molecular mechanics and molecular dynamics were used to simulate the adsorption of l-methionine derivatives, on copper (1 1 1) surface in nitric acid.     

Quantum chemical studies on corrosion inhibition of some lactones on mild steel in acid media

Study of the efficacy of some lactones to counter iron corrosion in 1 M hydrochloric acid using ab initio quantum chemical deductions and its comparison with the available experimental data forms a part of this research. It is believed that the inhibition efficiency has lucid correlation with the charge of oxygen atoms of inhibitor molecules. Furthermore, thermo-chemical calculations for oxepan-2-one (L3) on iron cluster result in adsorption energies close to experimental values. However, the interaction energies of L3 and iron cluster with the natural bond orbital are also reported. Furthermore, interaction energy of hydrogen ion and inhibitor with iron surface is investigated.     

A study of the inhibition of iron corrosion in HCl solutions by some amino acids

The performance of three selected amino acids, namely alanine (Ala), cysteine (Cys) and S-methyl cysteine (S-MCys) as safe corrosion inhibitors for iron in aerated stagnant 1.0 M HCl solutions was evaluated by Tafel polarization and impedance measurements. Results indicate that Ala acts mainly as a cathodic inhibitor, while Cys and S-MCys function as mixed-type inhibitors. Cys, which contains a mercapto group in its molecular structure, was the most effective among the inhibitors tested, while Ala was less effective than S-MCys. The low inhibition efficiency recorded for S-MCys compared with that of Cys was attributed to steric effects caused by the substituent methyl on the mercapto group. Electrochemical frequency modulation (EFM) technique and inductively coupled plasma atomic emission spectrometry (ICP-AES), were also applied to make accurate determination of corrosion rates. Validation of the Tafel extrapolation method for measuring corrosion rates was tested. Rates of corrosion rates (in μm y⁻¹) obtained from Tafel extrapolation method are in good agreement with those measured using EFM and ICP methods. Some theoretical studies, including molecular dynamics (MD) and density functional theory (DFT), were also employed to establish the correlation between the structure (molecular and electronic) of the three tested inhibitors and the inhibition efficiency. Adsorption via hydrogen bonding was discussed here based on some theoretical studies. Experimental and theoretical results were in good agreement.     

Experimental and theoretical study on the inhibition performance of triazole compounds for mild steel corrosion

A relationship between quantum chemical parameters for three triazole compounds and their inhibition ability was studied using electrochemical measurements (potentiodynamic polarization and EIS), molecular dynamic method and quantum chemical calculations. Electrochemical measurements results revealed that the inhibition efficiencies increased with the concentration of inhibitors. The molecular dynamic method results showed that the higher interaction potential between the inhibitor and metal surface, the higher the inhibition efficiency. The quantum chemical calculation results showed that the triazole ring is the active site in these inhibitors and they can absorb on Fe surface by donating electrons to Fe d-orbital.     

Quantum chemical study of some cyclic nitrogen compounds as corrosion inhibitors of steel in NaCl media

Corrosion inhibition efficiencies of 3-amino-1,2,4-triazole (3-ATA), 2-amino-1,3,4-thiadiazole (2-ATDA), 5-(p-tolyl)-1,3,4-triazole (TTA), 3-amino-5-methylmercapto-1,2,4-triazole (3-AMTA) and 2-aminobenzimidazole (2-ABA) as corrosion inhibitors on steel in sodium chloride media were investigated by using semiempirical PM3 and density functional theory (DFT) methods. Quantum chemical parameters such as highest occupied molecular orbital energy (E_HOMO), lowest unoccupied molecular orbital energy (E_LUMO), energy gap (ΔE) and dipole moment (μ) have been calculated for these compounds by using semiempirical PM3 and 6-31G(d), 6-311G(d,p) DFT methods. It was found that theoretical data support the experimental results.     

Theoretical evaluation of corrosion inhibition performance of imidazoline compounds with different hydrophilic groups

Corrosion inhibition performance of four 1-R-2-undecyl-imidazoline compounds (RCH₂COOH (A), CH₂CH₂OH (B), CH₂CH₂NH₂ (C) and H (D)) for carbon steel was evaluated by quantum chemistry and molecular mechanics methods. Results indicated that the hydrophilic groups (R) have remarkable influence on molecular reactivity, binding strength between self-assembled monolayer (SAM) and Fe surface, and compactness of the inhibitor SAM. The inhibition efficiency evaluated via theoretical methods was well accorded with reported experimental ones, following the same order as A > B > C > D. This research might provide a theoretical inhibition performance evaluation approach for homologous inhibitors.     

Investigation on some Schiff bases as corrosion inhibitors for mild steel

In the present work, the effect of some newly synthesized Schiff bases containing sulphur nitrogen as heteroatom was investigated on mild steel corrosion in acidic media. Electrochemical studies of the mild steel samples were performed in an aerated solution of 0.1 M HCl + dimethyl sulphoxide (DMS) as co-solvent. DMS is also behaving as a corrosion inhibitor for mild steel. At low inhibitor concentration and short immersion time one can see only the inhibitive effect of DMS as anodic inhibitor for mild steel. At high concentration and long immersion time inhibition efficiencies are increased and cathodic inhibition is observed.     

The relation between adsorption bonding and corrosion inhibition of azole molecules on copper

Adsorption of plain azole molecules in protonated, neutral, and deprotonated forms on Cu(1 1 1) was characterized by density functional theory calculations. Both metal/vacuum and metal/water interfaces were considered and solvent effects were estimated by continuum solvation model. It is shown that chemisorptive bonding is by and large the strongest for deprotonated inhibitors. Only for imidazole the aqueous-phase adsorption free energy of the neutral form is comparable to that of deprotonated form. This suggests that for imidazole—because of its more basic nature—the neutral form and for triazole and tetrazole their deprotonated forms are the active species for inhibiting corrosion.     

Experimental and theoretical calculations on corrosion inhibition of steel in 1 M H2SO4 by crown type polyethers

The corrosion inhibitive efficiencies of two crown type polyethers, namely dibenzo-bis-imino crown ether (C-1) and dibenzo-diaza crown ether (C-2), which are macrocyclic Schiff base and its reduced form (macrocyclic amine), respectively, for the steel in 1 M H₂SO₄ have been investigated by Tafel extrapolation and linear polarization methods. Corrosion and adsorption isotherm parameters were determined from current-potential curves. The studies show that C-1 and C-2 inhibit the corrosion of the steel in H₂SO₄ solution. Semiempirical AM1 method was used for theoretical calculations. The obtained results of these calculations for the compounds were found to be consistent with the experimental findings.     

Drugs: A review of promising novel corrosion inhibitors

Due to the toxicity of widely used corrosion inhibitors and the ever tightening environmental regulations surrounding their use and disposal, there is great interest in replacing harmful inhibitors with effective non-hazardous alternatives. Over the past two decades, extensive research and development have led to the discovery of new classes of corrosion inhibitors, and the importance on the use of several drugs as corrosion inhibitors has grown. This review presents most of the contributions made to the literature on the use of drugs as corrosion inhibitors of various metals in recent years.     

Diphenolic Schiff bases as corrosion inhibitors for aluminium in 0.1 M HCl: Potentiodynamic polarisation and EQCM investigations

The effects of novel synthesised two Schiff bases on the corrosion of aluminium in 0.1 M HCl were investigated using potentiodynamic polarisation and electrochemical quartz crystal microbalance measurements. Results show that inhibition efficiencies increase with increase in inhibitor concentration. This reveals that the inhibition occurs through adsorption of the inhibitor molecules on the metal surface. Adsorption of these inhibitors follows Temkin adsorption isotherm. The correlation between the inhibitor performances and their molecular structures has been investigated using quantum chemical parameters obtained by MNDO (modified neglect of diatomic overlap) semi-empirical method. Calculated quantum chemical parameters indicate that Schiff bases adsorbed on aluminium surface by chemical mechanism.     

Experimental and theoretical studies for mild steel corrosion inhibition in 1 M HCl by two new benzothiazine derivatives

The inhibition effect of new heterocyclic compounds, namely 2-aryl-benzothiazin-3-one (P1) and 3-aryl-benzothiazin-2-one (P2) on mild steel corrosion in 1 M HCl was investigated using electrochemical measurements. The results indicated that the inhibition efficiency depends on concentration and molecular structure of the investigated compounds. It is also found that the inhibition of P1 is greater than P2. The molecular structure effect on the corrosion inhibition efficiency was investigated using DFT calculations. The structural and electronic parameters were calculated and discussed. The obtained results show that the experimental and theoretical studies agree well and confirm that P1 is the better inhibitor.     

Benzimidazole and its derivatives as corrosion inhibitors for mild steel in 1M HCl solution

In this paper, the inhibition ability of benzimidazole and its derivatives against the corrosion of mild steel in 1M HCl solution was studied. The change of impedance parameters observed by variation of inhibitors concentration within the range of 50-250 ppm was an indication of their adsorption. The thermodynamic adsorption parameters proposed that these inhibitors retard both cathodic and anodic processes through physical adsorption and blocking the active corrosion sites. The adsorption of these compounds obeyed the Langmuir’s adsorption isotherm. The inhibition efficiency was increased with inhibitor concentration in the order of 2-mercaptobenzimidazole > 2-methylbenzimidazole > benzimidazole, which is in accordance with the variation of apparent activation energy of corrosion.     

A preliminary investigation of corrosion inhibition of mild steel in 0.5 M H2SO4 by 2-amino-5-(n-pyridyl)-1,3,4-thiadiazole: Polarization, EIS and molecular dynamics simulations

The efficiency, as steel corrosion inhibitors in 0.5 M H₂SO₄, of two thiadiazole derivatives, 2-amino-5-(3-pyridyl)-1,3,4-thiadiazole (3-APTD) and 2-amino-5-(4-pyridyl)-1,3,4-thiadiazole (4-APTD), was investigated by polarization and electrochemical impedance spectroscopy. The protection efficiency increases with increasing inhibitors concentration, but the temperature has hardly effect on the inhibition efficiency of APTD. The adsorption of APTD on iron surface obeys the Langmuir isotherm. The experimental results show that the inhibition efficiency of 4-APTD is higher than that of 3-APTD, and the molecular dynamics (MD) simulations show that the adsorption of 4-APTD on iron surface has the higher binding energy than that of 3-APTD.     

Molecular modeling of the inhibition mechanism of 1-(2-aminoethyl)-2-alkyl-imidazoline

Inhibition mechanism of five 1-(2-aminoethyl)-2-alkyl-imidazoline derivatives for carbon steel against CO2 corrosion was studied by molecular modeling. Molecular reactivity derived from quantum chemical calculation is insensitive to alkyl length. Inhibitor molecules can be adsorbed preferentially on metal surface with imidazoline ring attached on the surface. And with increase of alkyl length, interaction between inhibitor molecule and metal surface is enhanced to enable more stable adsorption of inhibitor molecules, which will form more compact self-assembly membrane with higher inhibition efficiency. The efficiency order of the inhibitors obtained by theoretical analysis was verified by experimental results.     

The use of quantum chemical methods in corrosion inhibitor studies

Quantum chemical methods are particularly significant in the study of electrochemistry and provide researchers with a relatively quick way of studying the structure and behaviour of corrosion inhibitors. The originality of this review article is based on the fact that it is the first and unique general reference for all those interested in the use of quantum chemical methods in corrosion inhibitor studies. It begins with a concise summary of the most used quantum chemical parameters and methods and then summarizes the results of research articles in corrosion science over the past 20 years.     

Analysis of molecular electronic structure of imidazole- and benzimidazole-based inhibitors: A simple recipe for qualitative estimation of chemical hardness

The effect of methyl, phenyl, and mercapto substituents on electronic structure of imidazole type inhibitors was characterized by density-functional-theory calculations. The most coherent trend is observed for chemical hardness. It is demonstrated that, in general, larger molecules are chemically softer provided they belong to the same chemical type. The electronegativity is reduced by methyl and mercapto substituents and increased by phenyl substituent. It is further shown that phenyl substituent reduces the solvation free energy thus increasing the relative tendency of the molecule to get adsorbed on the surface, which may contribute to the increased inhibition effectiveness against corrosion of copper.     

Experimental and theoretical investigation of organic compounds as inhibitors for mild steel corrosion in sulfuric acid medium

Three synthesized organic compounds were tested as corrosion inhibitors for mild steel in sulfuric acid medium by potentiostatic polarization, FTIR spectroscopy and SEM techniques. Quantum chemical parameters were also calculated to characterize adsorption mechanism. Acceptable correlations were obtained between inhibition efficiency and the calculated quantum chemical parameters. It was found that the investigated compounds exhibit a good inhibition effect especially at 8-10 ppm range concentration, which makes them commercially important. The adsorption of inhibitors on the surface obeys Langmuir adsorption isotherm. The values of activation energy and the thermodynamic parameters, such as K_ads, , and were calculated.