Influence of anions on the performance of isomers of aminobenzoic acid on the corrosion inhibition and hydrogen permeation through mild steel in acidic solutions

The influence of aminobenzoic acids on the corrosion and hydrogen permeation through mild steel in 1 m HC1 and 0.5 M H₂SO₄ has been studied using weight loss and gasometric measurements and various electrochemical techniques. All the three isomers of aminobenzoic acid inhibit the corrosion of mild steel both in HC1 and H₂SO₄ in the order ortho > meta > para. It is observed that the inhibition is greater in HCI than in H₂SO₄. The predominant behaviour is in the cathodic inhibitor mode. These compounds reduce the permeation current in 111 HCl and enhance it in 0.51 v1 H₂SO₄. The adsorption of these compounds on mild steel in 1 m HC1 and 0.5 m H₂SO₄ obeys Langmuir's adsorption isotherm.     

Influence of 2,5-bis(4-dimethylaminophenyl)-1,3,4-thiadiazole on corrosion inhibition of mild steel in acidic media

An example of a new class of corrosion inhibitors, namely, 2,5-bis(4-dimethylaminophenyl)-1,3,4-thiadiazole (DAPT) was synthesized and its inhibiting action on the corrosion of mild steel in 1 M HCl and 0.5 M H₂SO₄ at 30 °C was investigated by various corrosion monitoring techniques. A preliminary screening of the inhibition efficiency was carried out using weight loss measurements. At constant acid concentration, inhibitor efficiency increases with concentration of DAPT and is found to be more efficient in 0.5 M H₂SO₄ than in 1 M HCl. Potentiostatic polarization studies showed that DAPT is a mixed-type inhibitor. The effect of temperature on the corrosion behaviour of mild steel in 1 M HCl with addition of DAPT was studied in the temperature range from 25 to 60 °C. Its was shown that adsorption is consistent with the Langmuir isotherm for 30 °C. The negative free energy of adsorption in the presence of DAPT suggests chemisorption of thiadiazole molecules on the steel surface.     

Influence of tramadol [2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrate] on corrosion inhibition of mild steel in acidic media

Tramadol[2-[(dimethylamino)methyl]-1-(3-methoxyphenyl)cyclohexanol hydrate], a drug, was tested as a corrosion inhibitor for mild steel in 0.5 M HCl and 0.25 M H₂SO₄ separately at 300, 310 and 320 K using mass loss and galvanostatic polarization techniques. The percentage protection efficiencies were evaluated at different concentrations of the inhibitor at different temperatures. The protection efficiency increased with increase in inhibitor concentration and decreased with increase in temperature in both the acid solutions. Galvanostatic polarization studies showed that the inhibitor is of mixed type with a slight predominance of cathodic character. The inhibitor was more active in HCl than in H₂SO₄. The maximum protection efficiency approached 82.6% in the presence of 2.16 × 10⁻³ M inhibitor. Some samples of mild steel were examined by scanning electron microscopy. The inhibitor was found to adsorb on the mild steel surface according to the Langmuir adsorption isotherm. The thermodynamic functions of dissolution and adsorption processes were evaluated.     

Inhibition of mild steel corrosion in the presence of fatty acid triazoles

The influence of some fatty acid triazoles namely, 4-Phenyl-5-undecyl-4H- [1,2,4] triazole-3-thiol (PUTT), 5-Heptadec-8-enyl-4-phenyl-4H- [1,2,4] triazole-3-thiol (HPTT), and 5-Dec-9-enyl-4-phenyl-4H- [1,2,4] triazole-3-thiol (DPTT) on the corrosion of mild steel in 1 M hydrochloric acid (HCl) and 0.5 M sulfuric acid (H₂SO₄) was studied by weight loss and potentiodynamic polarization methods. The values of activation energy and free energy of adsorption of all the triazoles were calculated to investigate the mechanism of corrosion inhibition. The potentiodynamic polarization studies were carried out at room temperature, according to which all the compounds were mixed type inhibitors and inhibit the corrosion of mild steel by blocking the active sites of the metal. The adsorption of all the triazoles on mild steel surface in both the acid solutions was found to obey the Langmuir adsorption isotherm. All the compounds showed good inhibition efficiency in both acids. The inhibition efficiency of the compounds was found to vary with their nature and concentration, solution temperature and immersion time. Electrochemical impedance spectroscopy was also used to investigate the mechanism of the corrosion inhibition.     

Hector bases – a new class of heterocyclic corrosion inhibitors for mild steel in acid solutions

Three heterocyclic compounds namely 3-anilino-5-imino-4-phenyl-1, 2,4-thiadiazoline (AIPT), 3-anilino-5-imino-4-tolyl-1, 2,4-thiadiazoline (AITT), and 3-anilino-5-imino-4-chlorophenyl-1, 2,4-thiadiazoline (AICT) were synthesized and their influence on the inhibition of corrosion of mild steel in 1 M HCl and 0.5 M H₂SO₄ was investigated by weight loss and potentiodynamic polarization techniques. The values of activation energy and free energy of adsorption of these compounds were also calculated. Potentiodynamic polarization studies were carried out at room temperature, and showed that all the compounds were mixed type inhibitors causing blocking of active sites on the metal. The inhibition efficiency of the compounds was found to vary with concentration, temperature and immersion time. Good inhibition efficiency was evidenced in both acid solutions. The adsorption of the compounds on mild steel for both acids was found to obey the Langmuir adsorption isotherm. Electrochemical impedance spectroscopy was also used to investigate the mechanism of corrosion inhibition.     

Performance evaluation of poly (methacrylic acid) as corrosion inhibitor in the presence of iodide ions for mild steel in H2SO4 solution

The inhibition performance of poly (methacrylic acid) (PMAA) and the effect of addition of iodide ions on the inhibition efficiency for mild steel corrosion in 0.5 M H₂SO₄ solution were investigated in the temperature range of 303–333 K using electrochemical, weight loss, scanning electron microscopy (SEM), and water contact angles measurements. The results show that PMAA is a moderate inhibitor for mild steel in 0.5 M H₂SO₄ solution. Addition of small amount of KI to PMAA significantly upgraded the inhibition efficiency up to 96.7%. The adsorption properties of PMAA and PMAA + KI are estimated by considering thermodynamic and kinetic parameters. The results reveal that PMAA alone was physically adsorbed onto the mild steel surface, while comprehensive adsorption mode characterized the adsorption of PMAA + KI. Adsorption of PMAA and PMAA + KI followed Temkin adsorption isotherm. The SEM and water contact angle images confirmed the enhanced PMAA film formation on mild steel surface by iodide ions.     

In depth analysis of anti corrosion behaviour of eco friendly gum exudate for mild steel in sulphuric acid medium

The current research work was keen to examine the corrosion inhibition efficiency of mild steel (MS) in presence of aqueous extract of Araucaria heterophylla Gum (AHG) in 1?M H₂SO₄ medium. The phytoconstituents of the AHG were interpreted by GC-MS and corrosion inhibition efficiency was deduced using other techniques like weight loss method, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS). Adsorption of inhibitor molecules on the mild steel surface was supported by Density Functional Theory (DFT) studies, Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM). It is seen from the results that the inhibitor exhibits optimum efficiency of 78.57% at 0.05% v/v on mild steel specimen in 1?M H₂SO₄ medium at room temperature. Tafel polarizations clearly show that the aqueous extract of AHG acts as a mixed type inhibitor. The change in the EIS parameters in presence of inhibitor is investigative of the protective layer formation of the mild steel surface. The adsorption is found to obey Langmuir adsorption isotherm. Thermodynamic and activation parameters for the corrosion inhibition process supported the physical adsorption mechanism.     

Biomaterials for corrosion protection: evaluation of mustard seed extract as eco-friendly corrosion inhibitor for X60 steel in acid media

The toxic nature of most organic and inorganic corrosion inhibitors has necessitated the search for corrosion inhibitors with an excellent environmental profile. The present work is focused on the widening utilization of plant extracts for metallic corrosion control and reports on the corrosion inhibition effect of mustard seed extract (MSE) for typical X60 pipeline steel in 2 M HCl and 1 M H₂SO₄ solutions. Gravimetric and electrochemical (electrochemical impedance spectroscopy, linear polarization resistance and potentiodynamic polarization) methods were employed. The effect of immersion time and temperature on the corrosion inhibition effect of the plant extract was also studied. Results obtained show that MSE inhibited the corrosion of steel in both media which was more pronounced in H₂SO₄ than in HCl environment. Inhibition efficiency increased with increase in the concentration of the extract but decreased with increase in temperature. The potentiodynamic polarization studies revealed that MSE functions as a mixed-type inhibitor. The corrosion inhibition is assumed to occur via adsorption of the components of the extract on the steel surface which was found to obey Langmuir adsorption isotherm model. The morphology of the corroding steel surface in the absence and presence of the MSE was visualized using scanning electron microscopy.     

Corrosion inhibition of mild steel in acidic medium by poly (aniline-co-<Emphasis Type="Italic">o</Emphasis>-toluidine) doped with <Emphasis Type="Italic">p</Emphasis>-toluene sulphonic acid

The corrosion behaviour of mild steel in 0.5 M H₂SO₄ solution containing various concentrations of a p-toluene sulphonic acid doped copolymer formed between aniline and o-toluidine was investigated using weight loss, polarization and electrochemical impedance techniques. The copolymer acted as an effective corrosion inhibitor for mild steel in sulphuric acid medium. The inhibition efficiency has been found to increase with increase in inhibitor concentration, solution temperature and immersion time. Various parameters like E _a for corrosion of mild steel in presence of different concentrations of inhibitor and ΔG _ads, ΔH ⁰, ΔS ⁰ for adsorption of the inhibitor, revealed a strong interaction between inhibitor and mild steel surface. The adsorption of this inhibitor on the mild steel surface obeyed the Langmuir adsorption equation.     

Synergistic effect of iodide ions on inhibitive performance of 2,5-bis(4-methoxyphenyl)-1,3,4-thiadiazole during corrosion of mild steel in 0.5?M sulfuric acid solution

The synergistic effect of iodide ions on the corrosion inhibition of mild steel in 0.5 M H₂SO₄ solutions by 2,5-bis(4-methoxyphenyl)-1,3,4-thiadiazole (4-MTH) has been studied using electrochemical impedance spectroscopy (EIS) and the Tafel polarisation method. The results showed that the inhibition efficiency increased with 4-MTH concentration while the potential of desorption (E _d) remained unchanged. The addition of potassium iodide (KI) in the acid solution stabilized the adsorption of 4-MTH molecules on the metal surfaces and, therefore, enhanced the inhibition efficiency of 4-MTH and increased the value of E _d. The synergistic effect was observed between KI and 4-MTH with an optimum mass ratio of [4-MTH]/[KI] = 5/5. The calculated values of synergism parameter (S _θ) from the coverage of the surface were found to be more than unity in most cases. This clearly showed the synergistic influence of iodide ions on the corrosion inhibition of mild steel in 0.5 M H₂SO₄ by 4-MTH. The adsorption of this inhibitor alone and in combination with iodide ions followed Langmuir’s adsorption isotherm.     

Corrosion inhibition by poly(N-ethylaniline) coatings of mild steel in aqueous acidic solutions

Poly(N-ethylaniline) (PNEA) coatings on mild steel have been electrodeposited from 0.1 to 0.5 M aqueous oxalic acid solutions containing 0.1 M N-ethylaniline (NEA) using potentiodynamic synthesis technique. The effect of oxalic acid concentration on the corrosion behavior of PNEA coated mild steel surfaces were investigated by DC polarization and electrochemical impedance spectroscopy (EIS) techniques in 0.1 M HCl and 0.05 M H₂SO₄ solutions. Corrosion test results showed that corrosion resistance of PNEA coatings decreases with increasing concentrations of oxalic acid in polymerization solution. Decreasing acidity of the polymerization solution causes more effective protection against corrosion in aqueous acidic corrosive medium.     

Corrosion inhibitory action of Commiphora caudata extract on the mild steel corrosion in 1 M H2SO4 acid medium

Corrosion inhibitory action of Commiphora caudata extract on the mild steel corrosion in 1 M H₂SO₄ acid medium is investigated by weight loss and electrochemical studies. The weight loss method shows that the inhibition efficiency increases with the increase of inhibitor concentration, time, and temperature. The polarization studies reveal that the extract acts as a mixed type inhibitor. In electrochemical impedance measurement, the semicircle curves indicated that the charge transfer process controlled the corrosion of mild steel. Thermodynamic parameter such as free energy value was negative, that indicates spontaneous adsorption of inhibitor on mild steel surface. In the presence of inhibitor decreases the activation energy value which shows the chemical adsorption. The Commiphora caudata extract is found to obey Langmuir adsorption isotherm. Scanning electron microscopy, FTIR, and Quantum chemical studies confirmed that the mild steel protect from the corrosion by adsorption of the inhibitor molecules on surface of metal.     

Corrosion inhibition of mild steel in sulphuric acid using a bicyclic thiadiazolidine

The inhibitory effect of 3a,6a-diphenyltetrahydro-1H-imidazo [4,5-c] [1, 2, 5] thiadiazole-5(3H)-thione 2,2-dioxide (TTU) on the corrosion behaviour of mild steel in 0.5 M H₂SO₄, at (30 ± 0.5) °C was studied by gravimetric, potentiodynamic polarization, electrochemical impedance spectroscopy, and scanning electron microscopy measurements. The effect of inhibitor concentration on the corrosion rate, surface coverage and inhibition efficiency is investigated. Results show that TTU exerts a strong inhibiting effect on mild steel corrosion and acts as a cathodic-type inhibitor. TTU does not affect the mechanism of the cathodic reaction while the anodic reaction mechanism changes upon addition of the inhibitor. Possible mechanistic pathways for the inhibition process are proposed. The inhibition efficiency of TTU may be due to either the adsorption of inhibitor molecules building a protective film or the formation of an insoluble complex of the inhibitor with metal cations. TTU adsorption obeys the Langmuir model.     

Corrosion inhibition of mild steel by natural product compound

Corrosion inhibition of mild steel in H₃PO₄ containing chloride or sulphate ions have been studied using different electrochemical techniques. The corrosion and hydrogen evolution of mild steel alloy in 2 M H₃PO₄ acid containing 0.5 M NaCl can be effectively inhibited by addition of natural product compound, Thymol (IPMP), of different concentrations. However, in 2 M H₃PO₄ containing 0.5 M Na₂SO₄ corrosion cannot be effectively inhibited. The results of electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization measurements confirm the synergistic effects which describe the increase in the effectiveness of a corrosion inhibitor in the presence of Cl⁻ ions in the corrosive medium. At any temperature, an increase in it leads to an increase of the corrosion rate and hydrogen evolution on mild steel. Polarization and EIS results are in good agreement with each other. The obtained results were confirmed by surface examination using scanning electron microscope.     

Effect of iodide ions on corrosion inhibition of mild steel by 3,5-bis(4-methylthiophenyl)-4H-1,2,4-triazole in sulfuric acid solution

The synergistic effect of iodide ions on the corrosion inhibition of mild steel in 0.5 M sulfuric acid (H₂SO₄) in the presence of 3,5-bis(4-methylthiophenyl)-4H-1,2,4-triazole (4-MTHT) was investigated using weight loss measurements and different electrochemical techniques such as potentiostatic polarization curves and electrochemical impedance spectroscopy (EIS). The inhibition efficiency (E, %) increased with 4-MTHT concentration, but the desorption potential (E _d) remained unchanged with increasing 4-MTHT concentration. The addition of potassium iodide (KI) enhanced E considerably and increased the value of E _d. A synergistic effect was observed between KI and 4-MTHT with an optimum mass ratio of [4-MTHT]/[KI] = 4 × 10^–2. The synergism parameters (S ) calculated from surface coverage were found to be more than unity. This result clearly showed the synergistic influence of iodide ions on the corrosion inhibition of mild steel in 0.5 M H₂SO₄ by 4-MTHT. The adsorption of this inhibitor alone and in combination with iodide ions followed Langmuir's adsorption isotherm.     

Electrochemical behaviour of high nitrogen bearing stainless steel in acidic chloride solution: Effects of oxygen, acid concentration and surface roughness

The effects of oxygen, H₂SO₄ concentration and surface roughness on the electrochemical behaviour of high nitrogen bearing stainless steel (HNS) in acidified 0.5 M NaCl solution were investigated using potentiodynamic polarization method. The results revealed three corrosion potentials indicating an unstable system. The number of the potentials was influenced by H₂SO₄ concentration. Three potentials existed above 0.011 M H₂SO₄, two between 0.011 and 0.0065 M H₂SO₄ and one below 0.0065 M H₂SO₄. Oxygen increased the number of corrosion potential at 0.005 M H₂SO₄ + 0.5 M NaCl solution while surface roughness had no noticeable influence on the number of potentials but increased the values of the corrosion potentials and passivation current densities with increase in the surface roughness. The corrosion mechanism has been discussed using the ideal polarization curve models.     

Studies on the influence of iodide ions on the synergistic inhibition of the corrosion of mild steel in an acidic solution

The synergistic action caused by iodide ions on the corrosion inhibition of mild steel in 0.5 M H₂S0₄ in the presence of dicyclohexylamine (DCHA) has been investigated using potentiodynamic polarization, linear polarization and a.c. impedance techniques. DCHA inhibits the corrosion of mild steel in 0.5 m H₂SO₄ even at lower concentrations. The inhibition efficiency decreases with increase in the concentration of the amine. The addition of iodide ions enhances the inhibition efficiency to a considerable extent. The adsorption of this compound is also found to obey Langmuir's adsorption isotherm, thereby indicating that the main process of inhibition is by adsorption. The increase in surface coverage values in the presence of iodide ions indicates that DCHA forms an insoluble complex at lower amine concentrations by undergoing a joint adsorption. The synergism parameter (S) is defined and calculated both from inhibition efficiency and surface coverage values. This parameter in the case of DCHA is found to be more than unity, indicating that the enhanced inhibition efficiency caused by the addition of iodide ions is only due to synergism and there is a definite contribution from the inhibitor molecule. Thus, DCHA is then adsorbed by coulombic attraction on the metal surface where the I^– is already chemisorbed and thus reduces the corrosion rate.     

Electrochemical characterization of the protective film formed by the unsymmetrical Schiff's base on the mild steel surface in acid media

The corrosion inhibition efficiency of a newly synthesized Schiff's base for the corrosion of mild steel was studied in 1.0 M HCl and 0.5 M H₂SO₄ solutions. The results of weight loss measurements, electrochemical impedance and potentiodynamic polarization measurements consistently demonstrated that the Schiff's base synthesized is a good corrosion inhibitor with an inhibitory efficiency of approximately 92% at an optimum inhibitor concentration of 600 mg/L. The inhibition in both of the corrosive media was observed to be a mixed type. The potential of zero charge (PZC) at the metal–solution interface was determined for both the inhibited and uninhibited solutions to provide the mechanism of inhibition. The inhibitor formed a film on the metal surface through chloride or sulfate bridges depending upon the medium. The temperature dependence of the corrosion rate was also studied in the temperature range from 27 to 50 °C. The value of the activation energy (E_a) calculated showed that the inhibition film formation on the metal surface occurred through chemisorption. The thermodynamic parameters such as the adsorption equilibrium constant (K_ads) and the free energy of adsorption (ΔG_ads) were calculated and discussed. Several adsorption isotherms were tested and the experimental data fit well with the Langmuir adsorption isotherm.     

Aldimines — Effective Corrosion Inhibitors for Mild Steel in Hydrochloric Acid Solution

New and effective aldimine types of corrosion inhibitors namely, N-methylidene octylamine (MOA), N-ethylidene octylamine (EOA) and N-propylidene octylamine (POA) have been synthesized. Their inhibition efficiency was investigated for the corrosion of mild steel in 1 M HCl solution by various corrosion monitoring techniques. A preliminary screening of the inhibition efficiency of the inhibitors was carried out by weight loss and gasometric studies. They were found to behave as good inhibitors in 1 M HCl solution. Potentiodynamic polarization measurements show that aldimines are mixed type inhibitors. The extent of the decrease in the hydrogen permeation current through the mild steel surface was studied by the hydrogen permeation technique and it was found that the decrease was in the order POA > EOA > MOA. Double layer capacitance and charge transfer resistance values were derived from Nyquist plots obtained from AC impedance studies. The adsorption of these compounds on mild steel from 1 M HCl solution obeys the Temkin adsorption isotherm.     

Inhibiting Effect of Ionic Liquids on the Corrosion of Mild Steel in H2S and HCl Solution

Four imidazolium-based ionic liquids (ILs) were selected to investigate the inhibiting effect of ILs with various alkyl chain lengths on the corrosion of mild steel in H₂S and HCl solution using electrochemical experiments, weight loss and surface analyses, and quantum chemical study. The results demonstrated that these ILs acted as mixed-type inhibitors and efficiently inhibited the corrosion of mild steel in H₂S and HCl solution. Their excellent corrosion inhibition ability was due to their adsorption process on the metal surface, which followed the Langmuir adsorption isotherm. Furthermore, extending the alkyl chain length in the ILs could improve their inhibition performance.