带DGS结构的宽带微带线准椭圆函数滤波器设计

准椭圆滤波器体积小，重量轻，结构紧凑，比契比雪夫滤波器有更好的过渡特性，更高的带外抑制，在卫星通信和移动通信中有广泛的应用前景。但在用准椭圆滤波器实现宽带滤波器时，有时会遇到耦合间隙过小难以加工的问题。在准椭圆滤波器的谐振器底板加入缺陷接地结构（DGS），可以增强谐振器之间的耦合。应用DGS结构，用较宽的耦合间隙实现较强的耦合，从而使宽带滤波器物理上更容易实现。应用三维电磁场仿真软件，设计了一种带DGS结构的宽带微带线准椭圆函数滤波器。     

A miniaturized multilayer quasi-elliptic bandpass filter with aperture-coupled microstrip resonators

A four-pole quasi-elliptic function bandpass filter for a compact low-temperature cofired ceramic is proposed in this paper. The filter is constructed by the open-loop resonators and the miniaturized hairpin resonators that can be coupled through the apertures on the common ground plane, and the 0/spl deg/ feed structure adds two extra transmission zeros to the filter response. It is shown that the filter occupies a very small size. As a result, the proposed structure of the filter occupies a very small circuit area and has a good out-of band rejection.     

Miniaturised microstrip bandpass filter using octagonal hairpin resonators with side-coupled technique

A miniaturised elliptic-function-response bandpass filter using octagonal double-hairpin-shape resonators with side-coupled stubs has been designed and fabricated. Measured results are in good agreement with the electromagnetic simulation results and verify that the central frequency and the passband range of the proposed filter are 968 and 950?990 MHz, respectively. Also, its electric coupling characteristics and field distributions are investigated. The circuit size of the proposed filter occupies only 22.6 X 14.3 mm (=0.13λ_g) X 0.085λ_g).     

一种具有传输零点的Hairpin带通滤波器设计

本文通过在微带（hairpin）滤波器的谐振器上并联微带开路线，构成了一种新的hairpin带通滤波器。该滤波器在通带附近有一对传输零点，具有良好的频率响应以及频率选择特性。由于这种类型的微带滤波器实现传输零点不需要通过滤波器非相邻谐振器间的交叉耦合来获得，因此，设计过程非常简单。     

Bandpass filter design using a microstrip triangular loop resonator with dual-mode operation

A bandpass filter (BPF) design using a dual-mode microstrip triangular loop resonator is presented for the first time. The circuit produces frequency responses with one real finite frequency transmission zero and one imaginary finite frequency zero on either side of the passband. Depending on the perturbation arrangement, the nature of the coupling between degenerate modes causes the zeros to exchange their axis locations from real to imaginary and from imaginary to real while keeping their magnitude. This behavior results in frequency responses that are suitable for applications with asymmetrical requirements. Results show 8% bandwidth filters with insertion loss ranging from 0.82 dB to 1.4dB at 10 GHz. Advantages in size reduction and design flexibility are demonstrated when the triangular loop is compared to other dual-mode resonators.     

Two-dimensional orthogonal filter banks and wavelets with linearphase

Two-dimensional (2-D) compactly supported, orthogonal wavelets and filter banks having linear phase are presented. Two cases are discussed: wavelets with two-fold symmetry (centrosymmetric) and wavelets with four-fold symmetry that are symmetric (or anti-symmetric) about the vertical and horizontal axes. We show that imposing the requirement of linear phase in the case of order-factorable wavelets imposes a simple constraint on each of its polynomial order-1 factors. We thus obtain a simple and complete method of constructing orthogonal order-factorable wavelets with linear phase. This method is exemplified by design in the case of four-band separable sampling. An interesting result that is similar to the one well-known in the one-dimensional (1-D) case is obtained: orthogonal order-factorable wavelets cannot be both continuous and have four-fold symmetry     

Simplified numerical approach to Mueller's design of optimum linearphase pulse shaping filter

A reduced mathematical formulation of the problem of optimum design of a linear phase Nyquist filter is introduced. The method makes use of the even symmetry inherent in the filter design which leads to an eigenvalue problem with a matrix size one quarter of that of the original formulation, resulting in a considerable CPU time saving and greater numerical accuracy     

一个紧凑型超宽带微带带通滤波器

设计制作了一种紧凑型超宽带微带带通滤波器。该滤波器采用两对由1/4波长型SIR谐振器和1/4波长终端短路谐振器构成的枝节线对与微带低通滤波器相联而成。在ADS软件上对该滤波器进行仿真验证,然后制作实物。结果表明,该滤波器相对带宽达到112%,阻带带宽超过4 GHz,通带范围内插入损耗小于1 d B,回波损耗大于10 d B,阻带范围回波损耗大于20 d B;滤波器尺寸为14.22 mm×9.65 mm。     

Computer-aided design of a tapped microstrip filter

The impedance matrix of a single-section coupled microstrip structure with specific terminations and tapped input/output points has been determined. Design parameters such as the gap spacing, the width of the lines, and the positions of the input and output tap points for a specified filter characteristic, have been optimized with the help of a computer. A tapped line microstrip filter has been fabricated on alumina substrate using a thin-film technique and tested to verify the design procedure.     

微带交叉耦合滤波器的简化设计

主要研究微带交叉耦合滤波器的简化设计。通过约束传输零点之间的关系,简化了带通滤波器交差耦合的拓扑结构,同时又较好保持了带通滤波器带外的抑制能力。在利用微带结构实现时,采用了谐振器顺序耦合的结构,降低了滤波器微调的难度。同时在第一和第四谐振器间增加一段传输线以引入交叉耦合,通过调整引入传输线的位置等可调整相应传输零点的位置,增加了滤波器设计的灵活性。仿真结果验证了相关方法的有效性。     

Enhanced microstrip filter design with a uniform dielectric overlay for suppressing the second harmonic response

Parallel-coupled microstrip filters are designed to suppress spurious response at twice the passband frequency (2f/sub o/) with a uniform dielectric overlay. The overlay dielectric is used to equalize the modal phase velocities of each coupled stage. Based on the method, we have a large degree of freedom in choosing thickness and permittivity of the overlay dielectric. The image impedances of all the coupled stages in such a filter need adjusting to complete the filter synthesis. Two filters are fabricated and measured results show a good agreement with the simulation. A suppression of at least 40 dB to the spurious responses at 2f/sub o/ is achieved.     

A design of the low-pass filter using the novel microstrip defectedground structure

A new defected ground structure (DGS) for the microstrip line is proposed in this paper. The proposed DGS unit structure can provide the bandgap characteristic in some frequency bands with only one or more unit lattices. The equivalent circuit for the proposed defected ground unit structure is derived by means of three-dimensional field analysis methods. The equivalent-circuit parameters are extracted by using a simple circuit analysis method. By employing the extracted parameters and circuit analysis theory, the bandgap effect for the provided defected ground unit structure can be explained. By using the derived and extracted equivalent circuit and parameters, the low-pass filters are designed and implemented. The experimental results show excellent agreement with theoretical results and the validity of the modeling method for the proposed defected ground unit structure     

Fast sequential least squares design of FIR filters with linearphase

The authors propose a fast adaptive least-squares algorithm for linear-phase finite-impulse-response (FIR) filters. The algorithm requires 10m multiplications per data point where m is the filter order. This reduced computation stems from the fast adaptive forward-backward least-squares method. Both linear-phase cases i.e. with constant phase delay and with constant group delay, are examined. Simulation results demonstrate that the proposed algorithm is superior to the least-mean-squares gradient algorithm and the averaging scheme used for the modified fast Kalman algorithm     

Design of two-layer six-pole bandpass filter for wireless applications

A new miniaturised microstrip six-pole bandpass filter using a multilayer configuration is proposed. This structure consists of six resonators placed on two stacked layers separated by a common ground plane. In this structure, the mixed coupling between the resonators on the upper layer and those on the lower one is obtained by introducing two identical slots on the common ground plane. To validate this approach, a six-pole bandpass filter prototype was designed, fabricated and measured.     

Triple band microstrip patch antenna using a spur-line filter and a perturbation segment technique

A triple-band microstrip patch antenna is demonstrated by using a spur-line bandstop filter and a perturbation segment technique. This multifrequency operation can be obtained without increasing either the size or the thickness of the patch. In addition, through experimental results, the characteristics in all channels are shown to be nearly identical.<>     

具有高次谐波宽带抑制新型微带发夹滤波器设计

提出了一种新型微带发夹型滤波器,通过在传统发夹滤波器结构之后采用短路短截线与高次谐波四分之一波长开路短截线并联谐振的方法,可在不影响中频信号的前提下,对高次谐波进行有效抑制.同时在开短路支节之间串联一段微带径向短截线,能实现对谐波的宽带抑制.仿真结果表明此滤波器结构紧凑,具有良好的级联特性,在结构和性能上具有较大优势,适用于多种微波通信系统.     

Broadband active microstrip antenna design with the simplified realfrequency technique

This paper deals with the design of broadband active microstrip antennas where the amplifier is integrated with the radiator. Theoretically sound definitions for gain and noise figure of the active antenna are introduced, and their relationships with the definitions for the composing circuit and radiator parts are explained. A sequential design procedure is presented that allows the straightforward and optimal design of transmitting and receiving antennas with multiple active stages, taking into account input and output matching, the gain-versus-frequency curve as well as the noise performance. The theoretical concepts are illustrated with two examples: one of a transmitting active antenna and one of a receiving antenna. The former one is a two-stage design that achieves nearly 25% of bandwidth with regard to gain and matching and 24 dB gain improvement as compared to the matched passive antenna. The second one is a receiving antenna (one stage) with a measured noise figure of 1.2 dB in a bandwidth of over 17% and a gain improvement of 11.9 dB over the corresponding passive antenna. Finally co- and cross-polar radiation patterns in E- and H-plane prove that the antennas also have favorable radiation characteristics in a wide bandwidth (at least 18%)     

平行耦合微带线带通滤波器的研究与设计

由于其优越的性能,微带线形式的各种滤波器已成为广泛使用的射频器件.本文重点研究平行耦合微带线带通滤波器的原理和设计方法,并且对其不足之处,提出了全等宽平行耦舍微带线带通滤波器的设计思路.最后,结合具体应用实例,通过仿真计算,对两种形式的滤波器进行比较.结果表明全等宽平行耦合微带线带通滤波器适用带宽较宽,且结构简洁,大大降低了设计及仿真调试的复杂度.     

带阻滤波器微带支节分析

介绍了带阻滤波器的设计原理,从微带电路实现角度指出了各种窄频带带阻滤波器设计方法的优缺点;分析了微带带阻滤波器的电路形式和调谐支节,给出了调谐支节的最佳设计方法和最佳调谐带宽;并比较了串联支节与耦合线微带结构的滤波特性,所得结果可用于指导电路设计。