红柱石基刚玉-莫来石复相陶瓷的显微结构及性能

以红柱石颗粒为主要骨料,辅以莫来石颗粒和刚玉颗粒,硅微粉、铝微粉为基质料,经混合、困料及成型后,经不同温度下烧成4h,制得莫来石基刚玉-莫来石复相陶瓷,分析了烧成温度对复相陶瓷的物相组成、显微结构、烧成性能、力学性能及热学性能。结果表明:红柱石在高温下转化成针状和柱状莫来石改善复相陶瓷的烧成性能和抗热震性能;在1480℃烧成时,红柱石刚玉-莫来石复相陶瓷具有优越性能,其抗折强度为15.4MPa,耐压强度为91.6MPa,热膨胀系数为5.5×10-6/K,1100℃下水冷的抗热震次数达到99次。     

锂辉石与氧化锆对堇青石陶瓷热膨胀率的影响

以粘土、滑石、氧化铝等为原料 ,压制成型后于 1 3 70～ 1 40 0℃烧成 ,合成了堇青石陶瓷。研究了外加 5 %～ 1 0 %的β 锂辉石或氧化锆对堇青石陶瓷热膨胀率的影响。结果表明 ,这两种添加剂均能降低堇青石陶瓷的热膨胀率。XRD分析表明 ,添加锂辉石或氧化锆的堇青石试样中分别形成了莫来石和锆英石晶体     

国外特种陶瓷实用技术资料

６６２　氮化铝和金属基陶瓷６６３　一次烧成刚玉莫来石电气绝缘材料６６４　充满蜂窝的陶瓷６６５　烧成范围广的耐化学腐蚀陶瓷６６６　烧成范围宽的刚玉莫来石电气绝缘材料６６７　化工设备生产用陶瓷材料６６８　金属陶瓷加热元件６６９　氧化铝和硅酸乙酯基多孔陶瓷６７０　锆质耐蚀化工设备陶瓷６７１　烧成温度低的研磨体陶瓷６７２　化工设备瓷６７３　钪酸钇陶瓷６７４　耐腐蚀陶瓷６７５　用硅酸乙酯粘合剂触变坯料制作圆盘磨机陶瓷研磨件６７６　使用溶胶凝胶混合物的超轻质刚玉陶瓷６７７　用定向反应浸渍法制得的复合材…     

莫来石-磷酸锆复相陶瓷材料性能的研究

本文研究了在莫来石中添加低膨胀第二相磷酸锫的莫来石-磷酸锆复相陶瓷的性能,找到了在保证强度的同时,获得较低热膨胀系数的莫来石-磷酸锆复相陶瓷的制备方法.实验表明：莫来石-磷酸锆复相陶瓷能通过将莫来石粉料与磷酸锆粉料或莫来石粉料与磷酸锆生料粉按不同质量比混合烧结制备;加入1wt％的MgO作为烧结助剂,在1350℃烧成的样品具有最低的热膨胀系数和较小的吸水率.     

莫来石碳化硅砖的研制及应用

莫来石碳化硅砖的研制及应用１．使用条件陶瓷辊棒是悬挂在莫来石碳化硅砖上烧成的，因此莫来石碳化硅砖应具有高的荷重软化温度。同时该砖还应该向陶瓷辊棒传递一部分热量，因此应具有良好的导热性。此外，在整个烧成过程中因受热气流的直接冲刷和烟气的侵蚀，制品必须具...     

Al_2O_3多孔陶瓷的制备及性能

以煅烧α-Al_2O_3微粉为原料、粘土为高温烧成粘结剂、羧甲基纤维素为成型粘结剂,采用模压成型法制备了氧化铝多孔陶瓷,运用TG-DSC、SEM、XRD等手段研究了烧成温度、粘土含量对氧化铝多孔陶瓷微观形貌、物相结构、线收缩率、气孔率及力学性能的影响。结果表明:在烧结温度为1400℃时,氧化铝多孔陶瓷出现液相烧结,1500℃时液相烧结随粘土含量的增加更加明显;粘土在高温下促进了氧化铝多孔陶瓷的致密化使得线收缩率增大、气孔率降低、抗折强度提高。烧成氧化铝多孔陶瓷的主晶相为α-Al_2O_3,并有少量的莫来石相,莫来石由粘土在高温下转变得到。1400℃烧成的氧化铝多孔陶瓷综合性能优异,其气孔率介于28.6%~33.7%之间,抗折强度介于37.0~64.0 MPa之间。     

柠檬酸改性高岭土及其在陶瓷生产中的应用

用柠檬酸水溶液浸泡处理高岭土,得到改性高岭土,将改性高岭土外掺入陶瓷坯料,进行陶瓷生产应用研究。将改性前后的高岭土、改性前后坯料在不同温度下煅烧,采用XRF、XRD、FTIR和SEM等手段进行测试分析。研究结果显示,通过柠檬酸改性的高岭土,经980℃煅烧即开始形成莫来石,将改性高岭土引入陶瓷坯料中,能促进瓷胎中莫来石和玻璃相的生成,在保证陶瓷性能的前提下,可有效降低陶瓷的烧成温度。     

ZrSiO4/Al2O3烧结氧化铝-莫来石复相陶瓷微观结构的研究

将氧化铝和锆英石混合物试样分别在1350℃、1550℃下烧成，结果发现在1350℃烧成、保温3h的样品中有莫来石生成，而在1550℃烧成、保温3h的情况下却未发现莫来石生成，本文对此作了分析和探讨。关键词：氧化铝一莫来石，复相陶瓷，微观结构。     

莫来石结合碳化硅高温吸热陶瓷抗氧化性能的研究

以碳化硅及合成莫来石微粉为主要原料,制备了用于非真空太阳能吸热管的莫来石结合碳化硅高温陶瓷涂层。针对碳化硅基材料高温氧化问题,测定了样品的烧成增重率及亮度并结合XRD、SEM研究了莫来石结合碳化硅陶瓷的抗氧化性能。结果表明,莫来石添加量为20%,经1 380℃烧成样品的抗氧化性最好,其增重率为7.49%,亮度值为46.61。XRD分析烧结体主晶相为碳化硅(α-SiC)和莫来石(3Al2O3.2SiO2),并含有少量的方石英(SiO2),莫来石作为结合相在碳化硅晶粒周围形成"骨架",与SiO2玻璃相形成三围的网状保护层包裹在碳化硅表面,阻止碳化硅氧化。     

用凝胶法制备片状莫来石粉及其应用

用拟薄水铝石和非晶态ＳｉＯ_２微粉为原料，用溶胶－凝胶工艺制取了莫来石凝胶。通过干燥、煅烧，制得片状结晶莫来石粉．初步研究了凝胶法莫来石粉在钛酸铝陶瓷和烧结刚玉砖中的应用。实验结果表明，片状莫来石起了促进烧结、降低烧成温度的作用，并使钛酸铝－莫来石复相陶瓷和刚玉砖的强度得到显著提高．     

Insect antifeedant properties of anthranoids from the genusVismia

Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria.     

Direct observation of freeze-thaw instability of latex coatings via high pressure freezing and cryogenic SEM

Despite its industrial importance, the subject of freeze-thaw (F/T) stability of latex coatings has not been studied extensively. There is also a lack of fundamental understanding about the process and the mechanisms through which a coating becomes destabilized. High pressure (2100 bar) freezing fixes the state of water-suspended particles of polymer binder and inorganic pigments without the growth of ice crystals during freezing that produce artifacts in direct imaging scanning electron microscopy (SEM) of fracture surfaces of frozen coatings. We show that by incorporating copolymerizable functional monomers, it is possible to achieve F/T stability in polymer latexes and in low-VOC paints, as judged by the microstructures revealed by the cryogenic SEM technique. Particle coalescence as well as pigment segregation in F/T unstable systems are visualized. In order to achieve F/T stability in paints, latex particles must not flocculate and should provide protection to inorganic pigment and extender particles. Because of the unique capabilities of the cryogenic SEM, we are able to separate the effects of freezing and thawing, and study the influence of the rate of freezing and thawing on F/T stability. Destabilization can be caused by either freezing or thawing. A slow freezing process is more detrimental to F/T stability than a fast freezing process; the latter actually preserves suspension stability during freezing. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004 in Chicago, IL. Tied for first place in The John A. Gordon Best Paper Competition.     

Ethanol and (−)-α-Pinene: Attractant Kairomones for Bark and Ambrosia Beetles in the Southeastern US

In 2002–2004, we examined the flight responses of 49 species of native and exotic bark and ambrosia beetles (Coleoptera: Scolytidae and Platypodidae) to traps baited with ethanol and/or (−)-α-pinene in the southeastern US. Eight field trials were conducted in mature pine stands in Alabama, Florida, Georgia, North Carolina, and South Carolina. Funnel traps baited with ethanol lures (release rate, about 0.6 g/day at 25–28°C) were attractive to ten species of ambrosia beetles (Ambrosiodmus tachygraphus, Anisandrus sayi, Dryoxylon onoharaensum, Monarthrum mali, Xyleborinus saxesenii, Xyleborus affinis, Xyleborus ferrugineus, Xylosandrus compactus, Xylosandrus crassiusculus, and Xylosandrus germanus) and two species of bark beetles (Cryptocarenus heveae and Hypothenemus sp.). Traps baited with (−)-α-pinene lures (release rate, 2–6 g/day at 25–28°C) were attractive to five bark beetle species (Dendroctonus terebrans, Hylastes porculus, Hylastes salebrosus, Hylastes tenuis, and Ips grandicollis) and one platypodid ambrosia beetle species (Myoplatypus flavicornis). Ethanol enhanced responses of some species (Xyleborus pubescens, H. porculus, H. salebrosus, H. tenuis, and Pityophthorus cariniceps) to traps baited with (−)-α-pinene in some locations. (−)-α-Pinene interrupted the response of some ambrosia beetle species to traps baited with ethanol, but only the response of D. onoharaensum was interrupted consistently at most locations. Of 23 species of ambrosia beetles captured in our field trials, nine were exotic and accounted for 70–97% of total catches of ambrosia beetles. Our results provide support for the continued use of separate traps baited with ethanol alone and ethanol with (−)-α-pinene to detect and monitor common bark and ambrosia beetles from the southeastern region of the US.     

Methyl 2,4,6-decatrienoates Attract Stink Bugs and Tachinid Parasitoids

Halyomorpha halys (Stål) (Pentatomidae), called the brown marmorated stink bug (BMSB), is a newly invasive species in the eastern USA that is rapidly spreading from the original point of establishment in Allentown, PA. In its native range, the BMSB is reportedly attracted to methyl (E,E,Z)-2,4,6-decatrienoate, the male-produced pheromone of another pentatomid common in eastern Asia, Plautia stali Scott. In North America, Thyanta spp. are the only pentatomids known to produce methyl 2,4,6-decatrienoate [the (E,Z,Z)-isomer] as part of their pheromones. Methyl 2,4,6-decatrienoates were field-tested in Maryland to monitor the spread of the BMSB and to explore the possibility that Thyanta spp. are an alternate host for parasitic tachinid flies that use stink bug pheromones as host-finding kairomones. Here we report the first captures of adult and nymph BMSBs in traps baited with methyl (E,E,Z)-2,4,6-decatrienoate in central Maryland and present data verifying that the tachinid, Euclytia flava (Townsend), exploits methyl (E,Z,Z)-2,4,6-decatrienoate as a kairomone. We also report the unexpected finding that various isomers of methyl 2,4,6-decatrienoate attract Acrosternum hilare (Say), although this bug apparently does not produce methyl decatrienoates. Other stink bugs and tachinids native to North America were also attracted to methyl 2,4,6-decatrienoates. These data indicate there are Heteroptera in North America in addition to Thyanta spp. that probably use methyl 2,4,6-decatrienoates as pheromones. The evidence that some pentatomids exploit the pheromones of other true bugs as kairomones to find food or to congregate as a passive defense against tachinid parasitism is discussed.     

2007～2008年世界塑料工业进展

收集了2007年7月～2008年6月世界塑料工业的相关资料,介绍了2007～2008年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯·硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍.     

2005～2006年国外塑料工业进展

收集了2005年7月～2006年6月国外塑料工业的相关资料,介绍了2005—2006年国外塑料工业的发展情况。提供了世界塑料产量、消费量及全球各类树脂生产量以及各国塑料制品的进出口情况。作为对比,介绍了中国塑料的生产情况。按通用热塑性树脂（聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂）、工程塑料（聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚）、通用热固性树脂（酚醛、聚氨酯、不饱和树脂、环氧树脂）、特种工程塑料（聚苯硫醚、液晶聚合物、聚醚醚酮）的品种顺序,对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。