共查询到20条相似文献,搜索用时 125 毫秒
1.
2.
《山东工业技术》2015,(8)
应当需要承认现阶段随着技术的发展,对于制造业的要求也可以说是越来越高。而同样的情况下也必然的会对于制造业本身的精密性和误差性提出了更高的要求,一致预期也需要对于自身的生产工艺和流程做出有效地改善。新技术的运用和管理技术的改善可以说是制造业企业所不得不面对的问题。因此,对于机械设计加工来说,由于本身就是涉及的精细程度比较高,而且影响流程相对而言比较稳定的状况下,就必须去面对改善自身工作中的问题的情况。因此,依旧需要对于机械设计加工中存在的一些问题做一个简单的解析,然后提出一些具有针对性的意见,从而改善机械设计加工本身的完善程度,促进自身产业的进一步发展。 相似文献
3.
4.
近年来,随着我国科学技术的发展,生产工艺的革新也加快了步伐。其中以半持续生产系统为代表的新型生产工艺得到了巨大的发展。但由于发展时间短等一系列因素的制约,露天矿的半持续工艺在实际生产中还有着许多漏洞与不足。 相似文献
5.
随着人民生活的改善,社会的发展,人民居住条件不断的提高,住宅小区的建设的标准越来越高,分体空调已不能满足人们的要求,户式中央空调也得到了人们的认识.安装户式中央空调首先要与装潢工程的协调.其次要与水电的协调.还要进行隐蔽工程验收、考虑一些必要的因素. 相似文献
6.
动态冷干改善了热传导和物质成分的传导,同时也缩短了冷冻干燥的时间。把动态冷干与冷冻散装的前一道工序结合起来,即产生了创新性的药品生产工艺技术。 相似文献
7.
阐述了现有PDP红色荧光粉存在的问题,并重点从改进生产工艺和制备纳米级红色荧光粉对近几年改善PDP红色荧光粉质量的相关研究工作进行了阐述. 相似文献
8.
一、武汉钢铁学院大冶化工厂现在采用联合法生产工艺生产硝铵炸药。所谓联合法,就是指硝酸铵采用气流工艺进行干燥和粉碎、各组份采取轮碾机混合的联合生产方法。由于联合法生产工艺具有劳动强度较小、生产效率较高、产品质量稳定、安全性好、劳动环境得到改善等优点,目前已在全国各地广泛采用。 相似文献
9.
10.
11.
目的 主要研究机器人应用技术及管式充液成形生产工艺时序控制在自动化生产线中的应用,为高效智能充液成形自动化生产线提高生产节拍和产量提供可靠的理论依据。方法 根据典型管式充液成形生产线的工序组成及生产工艺时序分析生产线节拍情况,并应用逻辑控制技术实现对生产线节拍的优化设计。结果 采用机器人协同工作技术及控制生产线中断技术,将自动化生产线节拍控制在50 s以内。结论 由于充液成形工艺的特殊性,零件的合格率和稳定性受多种原因影响,零件的稳定性又对自动生产线的连续运行有很大的制约,所以在生产线设计时要综合考虑整线可能出现的各种间断情况并对其进行优化,以最大程度提升生产效率。 相似文献
12.
13.
14.
应用动态多参数在线能源计量技术对企业范围内各用能部门的实时能耗数据进行了准确、稳定、实时的采集和存储,形成了巨量的能源数据库。依据物质平衡和能量守恒原理,运用能耗基准因数法和e-p分析方法,建立了企业生产和能量转换过程的数学模型;评估和计算了设备和工序能耗、产品能值和单位能耗;建立了单位综合能耗模型。该模型成功地应用到北京某啤酒集团的能源计量系统中,通过设备和工序能耗的分析对比,指导工艺优化和节能空间的评估,对工艺和设备能耗进行合理预测。 相似文献
15.
Economic Production Cycles with Imperfect Production Processes 总被引:13,自引:0,他引:13
In this paper, we study the effects of an imperfect production process on the optimal production cycle time. The system is assumed to deteriorate during the production process and produce some proportion of defective items. The optimal production cycle is derived, and is shown to be shorter than that of the classical Economic Manufacturing Quantity model. The analysis is extended to the case where the defective rate is a function of the set-up cost, for which the set-up cost level and the production cycle time are jointly optimized. Finally, we also consider the case where the deterioration process is dynamic in its nature, i.e., the proportion of defective items is not constant. Both linear, exponential, and multi-state deteriorating processes are studied. Numerical examples are provided to illustrate the derivation of the optimal production cycle time in these situations. 相似文献
16.
This research focuses on developing an optimum production schedule in a process with a non-linear production rate. Non-linear production processes may exhibit an increasing production rate as the lot size increases, which results in increasing efficiency in per-unit production. The degree to which this learning is carried forward into the next lot varies by process. Sometimes the learning effect experiences a 100% carryover into the next lot, but other times some learning is forgotten and there is less than a 100% carryover. We consider processes in which the learning effect is completely forgotten from lot to lot. In practice non-linear processes are often treated as linear. That is, the production data are collected and aggregated over time and an average production rate is calculated which leads to inaccuracies in the production schedule. Here we use a discretised linear model to approximate the non-linear process. Production occurs in discrete time periods within which the amount produced is known. This enables a production schedule to be determined that minimises production and holding costs. A dynamic programming model that starts with the latest demand and progresses towards the earliest demand is used to solve the single-product single-machine problem. The model is tested using the production function from the PR#2 grinding process at CTS Reeves, a manufacturing firm in Carlisle, Pa. Solution times are determined for 50, 100, 200, 500, 1500, and 3000 periods. 相似文献
17.
18.
19.
20.
对氧化淀粉的干法、半干法、湿法3种制备工艺进行了探讨。论述了各工艺的优缺点:干法工艺流程较短、单位产品能耗较低、生产设备较简便,但产品质量不太稳定;半干法工艺虽然增加了一定的生产用水量,但未大量增加工艺流程,且产品质量较高;湿法工艺反应均匀、产品质量较稳定、生产过程较易控制,但存在产品较难回收、生产用水量大,且生产过程中会产生大量污水,给生态环境带来较大压力等缺点。因此,应根据各工艺的缺陷优化氧化淀粉生产工艺,以获得最佳的生产工艺条件。 相似文献