共查询到19条相似文献,搜索用时 250 毫秒
1.
2.
3.
大型变压器的油流带电分析及预防 总被引:2,自引:0,他引:2
本文通过国内外资料介绍及国内对油流静电的研究情况,阐述了油流带电的基本原理,油流带电的影响因素及产生的条件,简介了我省由油流带电引发的大型变压器故障及事故事例,分析了我省大型变压器的油流静电及运行情况,提出了预防措施。 相似文献
4.
1000kV特高压变压器油流带电分析及抑制对策 总被引:1,自引:0,他引:1
油流带电是威胁大型变压器安全运行的重要因素之一。特高压变压器制造工艺更为复杂,运行条件更为苛刻,为确保其运行可靠性,需要采取有效措施抑制油流带电造成的危害,同时最大程度地减少热效应对绝缘的影响,延长变压器的使用寿命。为此结合国内外大型变压器的油流带电现象的研究成果,介绍了油流带电现象产生机理、影响因素,并针对特高压变压器特点进行分析,提出了特高压变压器油流带电抑制措施。研究表明,降低油速和改善绝缘(特别是油道)以及冷却方式设计是减少油流带电问题的最重要措施。此外,需要加强油务监督工作来监测变压器的油流带电问题。 相似文献
5.
6.
浅析大型变压器油流带电现象 总被引:3,自引:0,他引:3
从油流带电产生的机理、影响油流带电的主要因素、油流带电的测试方法和广东省大型变压器油流带电的测试实例等方面探讨了油流带电现象,提出如何抑制油流带电现象的产生是当前急需解决的问题。 相似文献
7.
在强迫油循环的大型变压器中,油流带电引发的静电放电是威胁大型变压器安全运行的重要因素之一。对变压器油进行带电度测量,以便对带电度超标的变压器油采取措施并及时改善运行条件,以防止变压器因油流放电故障而造成变压器损坏。文章介绍了采用过滤法进行大型变压器油带电度检测仪器的原理和结构,制作过程中的改进以及国产油和进口油的带电度测试结果,实际大型变压器油的带电度测试结果。 相似文献
8.
一、引言超高压电力变压器的基本特点是电压高、容量大。为了保证其可靠运行,一是对油的纯度要求高;二是采用强油导向冷却。然而由此产生一个引人关注的课题,即油流带电现象。关于油流带电现象,国外从七十年代初开始研究,国内方兴未艾。目前国内外学者研究认为:在一定的温度、流速条件下,油流带电能引起超高压电力变压器局部放电、油老化,严重时导致运行事故。显然,应当采取措施抑制油流带电现象。然而,事物总是一分为二的。既然油流带电能引起变压器油老化,那么,根据油流带电机理,老化后的变压器油的油流 相似文献
9.
在了解和掌握国内外有关油流带电研究现状的基础上,研制出圆筒式油流带电模型,用于模型大型变压器中的油流带电过程,用该装置可对油流带电的特性进行研究。 相似文献
10.
11.
大型变压器中的油流带电现象及抑制对策 总被引:3,自引:0,他引:3
结合国内外大型变压器的油流带电现象的研究成果 ,介绍油流带电现象产生机理、影响因素和危害 ,总结提出了现场预防性的抑制措施。 相似文献
12.
超高压变压器油流静电带电问题的研究现状 总被引:9,自引:3,他引:6
简要阐述了超高压变压器油流静电带电问题的重要性及研究现状,着重评述了有关油流带电机理的若干观点、研究手段及方法,详细介绍了已取得的研究成果及预防油流带电事故的对策。最后,本文还展望了变压器油流带电领域今后的研究方向和趋势。 相似文献
13.
针对变压器绝缘油道的结构特点,本文提取出均匀扁矩形截面的模型油道,进而利用作者提出的变压器油流带电数学模型[1]和本文给出的计算方法研究了这种模型油道中油流带电的流速特性、外电场特性、温度特性和电导率特性,还分析了该系统中因油流带电引起的电场的分布规律。用文献[5]给出的实验油道作为验证模型,对比结果表明,计算值与文献中的实验值基本吻合。 相似文献
14.
大型换流变压器油流带电问题的分析 总被引:3,自引:0,他引:3
油流带电可能破坏换流变压器的油道绝缘性能,成为威胁超高压变压器甚至影响电网安全、稳定运行的重要因素之一,在特殊的绝缘结构和油冷却方式下,换流变压器中可能存在较多的油流带电问题。通过分析油流带电的产生机理、影响因素、抑制措施和换流变压器的结构特点,研究了换流变压器的油流带电问题。研究表明,降低油速和改善绝缘(特别是油道)设计是减少油流带电问题的最重要措施。开展全电压空载试验等可检验、监测换流变压器的油流带电问题是否严重,此外,向绝缘油中添加电导率调节剂或电荷抑制剂也可降低油流带电的倾向。 相似文献
15.
Moreau E. Paillat T. Touchard G. 《Dielectrics and Electrical Insulation, IEEE Transactions on》2003,10(1):15-21
The flow electrification process occurring at the oil-pressboard interface in high power transformers seems to cause electrical discharge incidents and may cause failures. The goal of this experimental study is to measure and to compare the streaming current obtained from unused pressboard, pressboard artificially degraded by electrical discharges, and pressboard obtained from a damaged power transformer. The influence of additive 1,2,3 Benzotriazole (BTA) in oil is also analyzed. The results show that flow electrification is greatly increased by the degraded pressboards compared with the new one. On the other hand, adding of BTA significantly reduces flow electrification. 相似文献
16.
Okubo H. Wakamatsu M. Inoue N. Kato K. Koide H. 《Dielectrics and Electrical Insulation, IEEE Transactions on》2003,10(6):956-962
The electrical insulation structure of most power transformers is a combination of insulating oil and solid materials. One of the crucial problems we face in transformer operation is flow electrification, which occurs at a flowing oil/solid material interface. Thus, for the transformer insulation design, we need to clarify the now electrification phenomena. In this paper, we measured the electric field strength in an oil/pressboard composite insulation system using an electro-optic method of the Kerr effect. We obtained the time variation of electric field distribution in both flowing uncharged and charged oil. It is notable that we could quantitatively clarify the electric field distortion in flowing charged oil by flow electrification. Furthermore, we measured the leakage current from divided electrodes and derived a charge density distribution along the flow direction. Finally, we quantitatively discussed the electric field distribution and the charge behavior from the measurement results. 相似文献
17.
电力变压器中的静电起电 总被引:3,自引:1,他引:2
对变压器中绝缘油流动带电现象进行了研究,给出了一些大型变压器运行故障实例,分析了变压器静电起电的原因和条件,介绍了静电起电的监视技术。 相似文献
18.
Touchard G. Grimaud P.O. Romat H. Moreau O. 《Dielectrics and Electrical Insulation, IEEE Transactions on》1994,1(4):728-733
The aim of our work is to understand better the mechanisms of flow electrification due to oil circulating inside a rectangular pressboard channel. This research has been done because of technical incidents in power transformers in which oil is flowing past pressboard with a velocity in the range of several meters per second. A possible explanation of the wall current observed along the channel is proposed 相似文献
19.
Peyraque L. Boisdon C. Beroual A. Buret F. 《Dielectrics and Electrical Insulation, IEEE Transactions on》1995,2(1):40-45
This paper presents the study of the major parameters on static electrification, using full-scale shell type transformers (570 MVA, 405 kV and 100 MVA, 500 kV). The consequences of static electrification on the dielectric strength and the conditions of partial discharge occurrence also are studied with oil flow rate up to 5 times the nominal value. It shows that the leakage currents are strongly influenced by temperature, applied voltage and oil flow rate Q. The latter is the most influential parameter. The winding leakage current I varies as Qn , where 1⩽n⩽3. The maximum value of I is observed at room temperature (20°C) when the transformer is energized 相似文献