基于RBF神经网络观测器飞控系统故障诊断

为了解决非线性系统采用解析方法进行故障诊断困难的问题,利用神经网络可逼近任意连续有界非线性函数的能力,提出了一种基于RBF神经网络观测器的故障检测与诊断方法,并详细论述了该故障诊断方法的构造原理。以含有非线性项的飞行控制系统的作动器模型为例,仅作动器的输入输出可测量,通过构造RBF神经网络观测器来拟合作动器系统模型,逼近其在正常情况下的输出。最后在飞控系统的闭环控制环境下,对作动器的三种典型故障进行了计算机仿真诊断,结果表明故障诊断方法是有效的。     

Analysis of order of redundancy relation for robust actuator fault detection

This paper presents a new approach, called robust nonlinear analytic redundancy (RNLAR) technique to actuator fault detection for input-affine nonlinear multivariable dynamic systems. Robust fault detection is important because of the universal existence of model uncertainties and process disturbances in most systems. This paper characterizes the order of redundancy relation for nonlinear systems in terms of robustness. A theorem is proposed that state an increase in the order of redundancy relation increases the robustness in the sense of a performance index defined in this paper. Experimental results on a PUMA 560 robotic arm are presented to demonstrate the application of the theorem.     

Optimal State Estimation and Fault Diagnosis for a Class of Nonlinear Systems

This study proposes a scheme for state estimation and,consequently,fault diagnosis in nonlinear systems.Initially,an optimal nonlinear observer is designed for nonlinear systems subject to an actuator or plant fault.By utilizing Lyapunov's direct method,the observer is proved to be optimal with respect to a performance function,including the magnitude of the observer gain and the convergence time.The observer gain is obtained by using approximation of Hamilton-Jacobi-Bellman(HJB)equation.The approximation is determined via an online trained neural network(NN).Next a class of affine nonlinear systems is considered which is subject to unknown disturbances in addition to fault signals.In this case,for each fault the original system is transformed to a new form in which the proposed optimal observer can be applied for state estimation and fault detection and isolation(FDI).Simulation results of a singlelink flexible joint robot(SLFJR)electric drive system show the effectiveness of the proposed methodology.     

Adaptive Nonlinear Actuator Fault Diagnosis for Uncertain Nonlinear Systems with Time‐Varying Delays

An actuator fault diagnosis method is presented in this paper for a class of time‐delayed nonlinear systems via the use of adaptive updating rules. The considered system is represented by a dynamic state space model where the time delays are embedded into the state vector. Model parameters are not perfectly known, which lead us to consider norm bounded uncertainties. An adaptive fault diagnosis observer is designed where the Lyapunov stability theory is used to obtain the required adaptive tuning rule for estimation of the nonlinear actuator fault. A simulated numerical example is included to demonstrate the effectiveness of the proposed approach.     

Fault estimation and controller compensation in Lure systems by LPV-embedding

Previous works have considered the use of set invariance theory for fault detection and isolation in nonlinear Lure systems. This paper extends those results and proposes a new actuator fault-tolerant control approach. The fault-tolerant control scheme is designed based on linear parameter-varying (LPV) models of Lure systems. The actuator fault situation is diagnosed by an invariant set-based fault detection and isolation algorithm. Faults are compensated by adapting the controller gain based on estimates of the fault magnitude. Conditions for correct fault detection and isolation, and closed-loop stability are derived. The proposed fault-tolerant control scheme is compared with a linearised model approach and the performance of both, LPV-embedding and linearised, approaches are analysed for scalar and second-order systems. An example of a chaotic Chua circuit is also provided to illustrate the proposed fault-tolerant control scheme in higher-order systems.     

On input/output maps for nonlinear systems via continuity in a locally convex topology

In this paper we show that the output of a nonlinear system with inputs in ( ) whose state satisfies a nonlinear differential equation with standard smoothness conditions can be written as the composition of a nonlinear map with a linear Hilbert-Schmidt operator acting on the input. The result also extends to abstract semi-linear infinite dimensional systems. The approach is via the study of the continuity of the solution in a locally convex topology generated by seminorms of Hilbert-Schmidt operators in Hilbert space. The result reveals an entirely new structure related to nonlinear systems which can lead to useful approximation results.     

Full-order observer-based actuator fault detection and reduced-order observer-based fault reconstruction for a class of uncertain nonlinear systems

This paper considers observer-based actuator fault detection and reconstruction problems for uncertain nonlinear systems. Based on a kind of full-order observer which is robust to disturbances but sensitive to actuator faults, a single detection observer is constructed to produce a residual which can be used to alarm the occurrence of the actuator faults when at least one actuator fault occurs indeed. The full-order observer is adaptive one because an adaptation law which can adjust the Lipschitz constant of Lipschitz term is introduced. For this reason, the Lipschitz constant can be unknown in our design. After this, a kind of reduced-order observer is developed by choosing a special observer gain matrix. Based on the reduced-order observer, we provide a kind of unknown information estimating method which can be used to not only reconstruct the actuator faults but also estimate the disturbances of the system. In simulation, a real model of the seventh-order aircraft is used to illustrate the effectiveness of the proposed methods.     

Cascade filter structure for sensor/actuator fault detection and isolation of satellite attitude control system

This paper presents a new scheme for fault detection and isolation in a satellite system. The purpose of this paper is to develop detection, isolation and identification algorithms based on a cascade filter for both total and partial faults in a satellite attitude control system (ACS). The cascade filter consists of a decentralized Kalman filter (DKF) and a bank of interacting multiple model (IMM) filters. The cascade filter is utilized for detection and diagnosis of anticipated sensor and actuator faults in a satellite ACS. Other fault detection and isolation (FDI) schemes are compared with the proposed FDI scheme. The FDI procedure using a cascade filter was developed in three stages. In the first stage, two local filters and a master filter detect sensor faults. In the second stage, the FDI scheme checks sensor residuals to isolate sensor faults, and 11 Extended Kalman filters with actuator fault models detect wherever actuator faults occur. In the third stage of the FDI scheme, four filters identify the fault type, which is either a total or partial fault. An important feature of the proposed FDI scheme is that it can decrease fault isolation time and accomplish not only fault detection and isolation but also fault type identification using a scalar penalty in the conditional density function.     

Actuator and Sensor Fault Detection and Failure Prediction for Systems with Multi-dimensional Nonlinear Partial Differential Equations

This paper presents a new model-based fault detection and failure prediction framework for a class of multi-input and multi-output (MIMO) nonlinear distributed parameter systems (DPS) described by partial differential equations (PDE) with actuator and sensor faults. The fault functions cover both abrupt and incipient faults. A Luenberger type observer is used to monitor the health of the DPS as a detection observer on the basis of the nonlinear PDE representation of the system and by utilizing only the measured output vector. By taking the difference between measured and estimated outputs, a residual signal is generated for fault detection. If the detection residual exceeds a predefined threshold, a fault is claimed to be active. Once an actuator or a sensor fault is detected, an appropriate fault parameter update law is developed to learn the fault dynamics online with the help of an additional measurement. Later, an explicit formula is introduced to estimate the time-to-failure in the presence of an actuator/sensor fault by utilizing the limiting values of the output vector along with the estimated fault parameter vector. Eventually, the effectiveness of the proposed detection and prediction framework is demonstrated on a nonlinear process.

     

基于高增益鲁棒滑模观测器的故障检测和隔离

针对一类同时具有执行器和传感器故障的不确定线性系统,讨论了基于观测器的故障检测和隔离方法.首先,通过引入增维向量,使得在构造的增维系统中,故障向量包含了原系统的执行器故障和传感器故障.通过构造辅助输出使增维系统的观测器匹配条件得以满足,同时设计高增益滑模观测器对辅助输出进行估计.然后,对增维系统构造鲁棒滑模观测器并用作故障检测观测器,通过滑模控制项来抑制干扰,使观测器具有鲁棒性.在此基础上,结合多观测器故障隔离思想,提出了可以同时对执行器故障和传感器故障进行检测和隔离的方法. 最后,通过对一个五阶飞行器模型进行仿真,证明了所提方法的有效性.     

Robust adaptive fault‐tolerant tracking control for a class of high‐order nonlinear system with finite‐time prescribed performance

In this article, an improved prescribed performance adaptive control strategy is developed to handle the output tracking control problem for a class of nonlinear high‐order systems with actuator faults. The actuator faults considered include the bias fault and gain fault models. A technique of adding a power integrator is utilized to deal with the controller design problem of high‐order system. With the help of backstepping technology and the classic adaptive control, an output tracking control scheme is proposed, which can guarantee that all signals of the closed‐loop system are bounded and the tracking error converges to a finite‐time predetermined region. Finally, the feasibility of the presented control method is tested through the simulation results.     

Isolation and handling of actuator faults in nonlinear systems

This work considers the problem of control actuator fault detection and isolation and fault-tolerant control for a multi-input multi-output nonlinear system subject to constraints on the manipulated inputs and proposes a fault detection and isolation filter and controller reconfiguration design. The implementation of the fault detection and isolation filters and reconfiguration strategy are demonstrated via a chemical process example.     

Actuator fault diagnosis for a class of nonlinear systems and its application to a laboratory 3D crane

In this paper, an actuator fault diagnosis scheme is proposed for a class of affine nonlinear systems with both known and unknown inputs. The scheme is based on a novel input/output relation derived from the considered nonlinear systems and the use of the recently developed high-order sliding-mode robust differentiators. The main advantages of the proposed approach are that it does not require a design of nonlinear observer and applies to systems not necessarily detectable. Conditions are provided to characterize the feasibility of fault detection and isolation using the proposed scheme and the maximum number of isolatable actuator faults. The efficacy of the proposed actuator fault diagnosis approach is tested through experiments on a laboratory 3D Crane, and the experimental results show that the proposed actuator fault diagnosis approach is promising and can achieve fault detection and isolation satisfactorily.     

A sliding mode observer-based strategy for fault detection,isolation, and estimation in a class of Lipschitz nonlinear systems

This article investigates the design and application of a sliding mode observer (SMO) strategy for actuator as well as sensor fault detection, isolation, and estimation (FDIE) problem for a class of uncertain Lipschitz nonlinear systems. Actuator FDIE is addressed by regrouping the system's inputs into a structure suitable for SMO design. Similarly, by filtering the regrouped outputs, a similar system structure can be developed for sensor FDIE problem. Once in the suitable form and under certain assumptions, nonlinear SMOs are proposed for actuator and sensor FDIE. A systematic LMI-based design approach for the proposed SMO is presented. Additionally, the article addresses four problems, namely: (P1) What are the conditions for isolating single and/or multiple faults? (P2) What is the maximum number of faults that can be isolated simultaneously? (P3) How should one design SMO-based FDI approach in order to achieve multiple fault isolation using as few observers as possible? (P4) How can one estimate the shape of the faults? To solve the above problems, a new concept called fault isolation index (FIX) is proposed for actuator and sensor FDIE. It is proved that fault isolation can only be achieved if FIX?≠?0, and also that the maximum number of faults that can be isolated is equal to FIX. Using the proposed fault isolation strategy and by treating some healthy inputs or outputs as unknown inputs, a systematic FDIE design scheme using a bank of nonlinear SMOs, which provides a solution for the four problems is provided. An example is used to illustrate the proposed ideas. The simulation results show that the proposed FDIE scheme can successfully detect and isolate both slowly and fast-changing actuator faults. It is also shown that accurate estimation of actuator faults can be achieved.     

Fault-tolerant control of linear systems using adaptive virtual actuator

In this paper, design and development of fault-tolerant control (FTC) is investigated for linear systems subject to loss of effectiveness and time-varying additive actuator faults as well as an external disturbance using the fault-hiding approach. The main aim of this approach is to keep the nominal controller and to design a virtual actuator that is inserted between the faulty plant and the nominal controller in order to hide actuator faults and disturbances from the nominal controller, and consequently the performance of the system before and after the occurrence of actuator faults is kept to be the same. The proposed adaptive virtual actuator does not require a separated fault detection, isolation and identification (FDII) unit and both state and output feedback cases are considered. An illustrative example is given to demonstrate the effectiveness of the proposed adaptive virtual actuator in both cases.     

基于自适应迭代学习算法的一类非线性系统故障检测与估计

针对迭代学习算法在非线性系统故障检测与估计过程中存在估计误差较大和收敛速度较慢等不足的问题,提出了一种基于龙格–库塔故障估计观测器模型的自适应迭代学习算法,有效降低了故障估计误差;并引入H∞性能指标,提高了故障估计观测器的收敛速度.该算法首先设计故障检测观测器对故障进行检测,然后设计故障估计观测器,并将自适应算法与迭代学习策略相结合,使得估计故障逐渐逼近真实故障,从而实现对非线性系统中多种常见故障的精确检测与估计.最后,通过机械臂旋转关节驱动电机的执行器故障仿真验证了所提算法的有效性.     

一种非线性系统被控对象故障诊断方法

控制系统中的传感器、执行器和被控对象的故障检测与诊断往往是把执行器和被控对象视为一个整体来研究, 这不利于故障的决策与处理. 对此, 设计了非线性系统故障诊断的滑模观测器, 提出一种诊断被控对象故障的方法, 即对非线性系统和执行器同时进行观测, 根据两观测器残差的变化情况判断出非线性系统中传感器、执行器和被控对象故障. 最后以单输入单输出非线性系统为例进行仿真, 验证了该方法的有效性.

     

LPV model-based robust diagnosis of flight actuator faults

A linear parameter-varying (LPV) model-based synthesis, tuning and assessment methodology is developed and applied for the design of a robust fault detection and diagnosis (FDD) system for several types of flight actuator faults such as jamming, runaway, oscillatory failure, or loss of efficiency. The robust fault detection is achieved by using a synthesis approach based on an accurate approximation of the nonlinear actuator–control surface dynamics via an LPV model and an optimal tuning of the free parameters of the FDD system using multi-objective optimization techniques. Real-time signal processing is employed for identification of different fault types. The assessment of the FDD system robustness has been performed using both standard Monte-Carlo methods as well as advanced worst-case search based optimization-driven robustness analysis. A supplementary industrial validation performed on the AIRBUS actuator test bench for the monitoring of jamming, confirmed the satisfactory performance of the FDD system in a true industrial setting.     

基于未知输入观测器的非线性广义系统执行器故障检测和重构

针对一类含有未知扰动广义非线性系统的执行器故障,本文提出一种重构算法。首先设计未知输入观测器对干扰鲁棒,作为故障检测观测器。检测到发生故障后,通过提出含有误差比例项和积分项的故障估计算法,形成自适应观测器,实现准确快速地估计故障,同时估计状态变量。根据李雅普诺夫稳定理论给出估计误差一致最终有界的充分条件。最后仿真验证该类观测器和重构算法的有效性。     

Adaptive actuator fault compensation for linear systems with matching and unmatching uncertainties

The problem of process systems subject to actuator faults (partial loss of actuator effectiveness) is considered. An active fault compensation control law is designed that utilizes compensation in a way that accounts for matching and unmatching uncertainties and the occurrence of actuator faults. The main idea is designing the robust compensation controller to guarantee closed-loop stability in the presence of faults, based on a neural network representation of the fault dynamics. Changes in the system due to faults are modeled as unknown nonlinear functions. The updating control law is derived such that all the parameters of the closed-loop system are bounded. An output feedback controller is used to the “healthy” system and the adaptive feedback controller is used to compensate for the effect of the dynamics caused by the fault. The advantage of fault compensation is the dynamics caused by faults can be accommodated online. The proposed design method is illustrated on a three-tank system.