共查询到20条相似文献,搜索用时 46 毫秒
1.
2.
3.
4.
5.
针对尾鳍摆动仿生机器鱼游动迟缓、姿态不稳定的问题,文中提出一种胸尾鳍联动的仿生机器鱼,实现了仿生机器鱼外部轮廓、内部布局设计,提出了仿生机器鱼运动控制系统,为仿真和实验提供硬件基础;改进了仿生机器鱼运动学模型,提出了水动力学仿真中鱼体轮廓改变的运动函数;基于仿生机器鱼游动水动力学仿真分析,得到最优运动参数以及最优运动参数下的应力、流速、涡情况;采用仿真最优胸尾鳍运动幅度结果,改变胸尾鳍运动频率,设计实验研究了仿生机器鱼游动水动力学性能。仿真结果表明,以尾鳍摆动幅度72mm、胸鳍转动角度水平正负45°、胸尾鳍运动频率均为3Hz等运动参数进行仿真,无胸鳍辅助游动的推进力为2N,有胸鳍辅助游动的推进力为2.6N;实验分析结果表明,以最佳运动参数实验,无胸鳍辅助游动的推进力为1.57 N,有胸鳍辅助游动的推进力为2.57 N。仿真和实验均说明,有胸鳍辅助鱼体游动的推进力更大。 相似文献
6.
7.
8.
3 自由度仿生机器鱼尾鳍试验装置 总被引:1,自引:0,他引:1
3自由度仿生机器鱼尾鳍试验装置是专门用于模拟、演示3自由度仿生机器鱼尾鳍运动姿态和测量尾鳍力能参数的装置.针对工作环境和设计要求,综合运用生物仿生学、机器人学、机构学、工程力学及数控技术等理论和技术,探讨了3自由度仿生机器鱼尾鳍试验装置的原理及设计方法.该试验装置为各种形式仿生机器鱼的研制开发提供了一个模拟运动状态和测量力能参数的试验平台,对仿生机器鱼技术的研究具有重要意义. 相似文献
9.
《现代制造技术与装备》2017,(3)
通过对仿生机器鱼的潜浮机理进行分析,提出了一种结构紧凑、成本较低的小型可潜浮仿生机器鱼的设计方案,并对其外形结构和推进机构进行结构设计,提供了直游、转弯和潜浮运动的实现方法,实现了小型仿生机器鱼的三维运动。 相似文献
10.
11.
12.
In a recent paper, the Ritz method with simple algebraic polynomials as trial functions was used to obtain an eigenvalue equation for the free vibration of a class of homogeneous solids with cavities. The method presented is here extended to the study of a class of non-homogeneous solids, in which each solid is composed of a number of isotropic layers with different material properties. The Cartesian coordinate system is used to describe the geometry of the solid which is modelled by means of a segment bounded by the yz, zx and xy orthogonal coordinate planes and by two curved surfaces which are defined by fairly general polynomial expressions in the coordinates x, y and z. The surface representing the interface between two material layers in the solid is also described by a polynomial expression in the coordinates x, y and z. In order to demonstrate the accuracy of the approach, natural frequencies are given for both a two- and three-layered spherical shell and for a homogeneous hollow cylinder, as computed using the present approach, and are compared with those obtained using an exact solution. Results are then given for a number of two- and three-layered cylinders and, to demonstrate the versatility of the approach, natural frequencies are given for a five-layered cantilevered beam with a central circular hole as well as for a number of composite solids of more general shape. 相似文献
13.
三爪自定心卡盘作为机床的主要附件,已有一百多年的发展历史,尽管目前随着数控技术的不断发展,越来越多地需求高速动力卡盘,但三爪自定心卡盘目前仍有一定的市场。 要保证卡盘可靠地夹紧工件,必须使其有可靠的夹持精度;要保持卡盘的精度,必须要严格控制各零部件公差及误差,如盘丝的极心偏。 极心偏是形成圆的渐开线的基圆圆心 (极心 )与盘丝内孔中心不同心所造成的偏差值。它对卡盘精度的影响分两种情况,一是卡爪夹持弧采用配磨,二是卡爪夹持弧采用单磨。本文主要探讨配磨时的影响。 卡爪夹持弧采用配磨,即每台卡盘整体… 相似文献
14.
详细分析了圆柱面素线的直线度公差带在新旧标准中定义和解释的区别,并从对圆柱面素线实际要素检测的角度,提出了推行新标准的实际意义。 相似文献
15.
16.
通过分析膨胀套在实际使用产生滑移受阻现象、卡死现象原因的实质,并在分析产生问题原因的基础上提出了改进措施即:增加导向机构。 相似文献
17.
根据广州市珠江新城旅客自动运输系统(APM)列车的运行特点,介绍APM列车制动系统的制动方式及其特点,分析APM列车动态制动和摩擦制动的工作机理及其区别和联系,阐明APM列车制动系统的电控制过程和气控制过程,从而为APM列车制动系统的维护和管理提供一定的依据. 相似文献
18.
我公司于80年代末引进Aspera公司年产80万台冰箱(冷柜)压缩机生产线及软件技术,在压缩机加工中,活塞销孔(如图1所示)的加工是难点之一。用镗床加工,质量一直难以达到要求,废品率很高。后来我们将Aspera公司的加工工艺即精镗后滚光改为精镗后用金刚石铰刀粗、精铰孔,由此解决了这个技术难题。(1)原意大利Aspera公司工艺简述其工艺流程为:钻6.5通孔→扩孔至7+0.1→粗镗7.473+0.036、圆柱度0.01→精镗至7.935+0.006、圆柱度0.002→滚光7.938+0.006、圆柱度0… 相似文献
19.
设计了磨粉机快辊轴承座的加工工艺和具体的工装夹具.利用卧式加工中心加工磨粉机快辊轴承座,辅以能够高效快速夹紧的夹具,既可以保证加工精度,又能够提高加工效率. 相似文献
20.
The article presents a brief review of the wear models based on the kinetic thermofluctuation approach. The materials were developed using SamGTU sclerometric programming software and a set of instruments developed at Samara Engineering University for assessing the parameters of kinetic thermoactivation for surface fracture deformed by friction. The first obtained results of assessments and the estimated prediction of wear resistance exemplified by tribocouple of the aircraft chassis are presented. 相似文献