High-entropy (Ho0.2Y0.2Dy0.2Gd0.2Eu0.2)2Ti2O7/TiO2 composites with excellent mechanical and thermal properties

High-performance ceramics with low thermal conductivity, high mechanical properties, and idea thermal expansion coefficients have important applications in fields such as turbine blades and automotive engines. Currently, the thermal conductivity of ceramics has been significantly reduced by local doping/substitution or further high-entropy reconfiguration of the composition, but the mechanical properties, especially the fracture toughness, are insufficient and still need to be improved. In this work, based on the high-entropy titanate pyrochlore, TiO₂ was introduced for composite toughening and the high-entropy (Ho_0.2Y_0.2Dy_0.2Gd_0.2Eu_0.2)₂Ti₂O₇-xTiO₂ (x = 0, 0.2, 0.4, 1.0 and 2.0) composites with high hardness (16.17 GPa), Young's modulus (289.3 GPa) and fracture toughness (3.612 MPa·m^0.5), low thermal conductivity (1.22 W·m⁻¹·K⁻¹), and thermal expansion coefficients close to the substrate material (9.5 ×10⁻⁶/K) were successfully prepared by the solidification method. The fracture toughness of the composite toughened sample is 2.25 times higher than that before toughening, which exceeds most of the current low-thermal conductivity ceramics.     

Marked reduction in the thermal conductivity of (La0.2Gd0.2Y0.2Yb0.2Er0.2)2Zr2O7 high-entropy ceramics by substituting Zr4+ with Ti4+

The (La_0.2Gd_0.2Y_0.2Yb_0.2Er_0.2)₂(Zr_1-xTi_x)₂O₇ (x = 0–0.5) high-entropy ceramics were successfully prepared by a solid state reaction method and their structures and thermo-physical properties were investigated. It was found that the high-entropy ceramics demonstrate pure pyrochlore phase with the composition of x = 0.1–0.5, while (La_0.2Gd_0.2Y_0.2Yb_0.2Er_0.2)₂Zr₂O₇ shows the defective fluorite structure. The sintered high-entropy ceramics are dense and the grain boundaries are clean. The grain size of high-entropy ceramics increases with the Ti⁴⁺ content. The average thermal expansion coefficients of the (La_0.2Gd_0.2Y_0.2Yb_0.2Er_0.2)₂(Zr_1-xTi_x)₂O₇ high-entropy ceramics range from 10.65 × 10^?6 K^?1 to 10.84 × 10^?6 K^?1. Importantly, the substitution of Zr⁴⁺ with Ti⁴⁺ resulted in a remarkable decrease in thermal conductivity of (La_0.2Gd_0.2Y_0.2Yb_0.2Er_0.2)₂(Zr_1-xTi_x)₂O₇ high-entropy ceramics. It reduced from 1.66 W m^?1 K^?1 to 1.20 W m^?1 K^?1, which should be ascribed to the synergistic effects of mass disorder, size disorder, mixed configuration entropy value and rattlers.     

High-entropy ferroelastic rare-earth tantalite ceramic: (Y0.2Ce0.2Sm0.2Gd0.2Dy0.2)TaO4

In this study, high-entropy rare-earth tantalate ceramics (Y_0.2Ce_0.2Sm_0.2Gd_0.2Dy_0.2)TaO₄ ((5RE_0.2)TaO₄) have been successfully fabricated. The possibility of formation of (5RE_0.2)TaO₄ was verified via first-principles calculations. In addition, the phase structure, ferroelastic toughening mechanism, thermophysical, and mechanical properties were systematically investigated. The (5RE_0.2)TaO₄ ceramics have lower phonon thermal conductivity (1.2–2.6 W·m^–1·K^–1) in the entire temperature range than that of RETaO₄ and YSZ. (5RE_0.2)TaO₄ has a higher fracture toughness and lower brittleness index than YSZ. The thermal expansion coefficients of (5RE_0.2)TaO₄ are as high as 10.3 × 10^-6 K^–1 at 1200°C and Young's modulus is 66–189 GPa, and thus, (5RE_0.2)TaO₄ possesses great potential for application in thermal barrier coatings (TBCs).     

High-entropy rare earth titanates with low thermal conductivity designed by lattice distortion

High-entropy single-phase rare earth titanates (RE_0.2Gd_0.2Ho_0.2Er_0.2Yb_0.2)₂Ti₂O₇ (RE = Sm, Y, Lu) were designed and synthesized successfully, in which their lattice distortion was quantitatively described by mass disorder and size disorder. It is worth mentioning that (Y_0.2Gd_0.2Ho_0.2Er_0.2Yb_0.2)₂Ti₂O₇ could obtain the low thermal conductivity (1.51 W·m⁻¹·K⁻¹, 1500°C), high thermal expansion coefficient (average, 11.69×10⁻⁶ K⁻¹, RT ∼1500°C) and excellent high-temperature stability. In addition, the relationship between the microstructure and thermal transport behaviors has been studied at the atomic scale. Due to the disorder of A-site ions, severe lattice distortion occurred in specific crystal planes, and the large mass difference between Y³⁺ and other RE³⁺ further causes mass fluctuation and results in lower thermal conductivity. Compared with YSZ, the high-entropy rare earth titanate (Y_0.2Gd_0.2Ho_0.2Er_0.2Yb_0.2)₂Ti₂O₇ has lower thermal conductivity, higher thermal expansion coefficient, and excellent high-temperature stability, which has great potential for application in the thermal protection field.     

Ultrafast high-temperature sintering of (Y0.2Dy0.2Er0.2Tm0.2Yb0.2)4Hf3O12 high-entropy ceramics with defective fluorite structure

An entropy-stabilized rare earth hafnate (Y_0.2Dy_0.2Er_0.2Tm_0.2Yb_0.2)₄Hf₃O₁₂ (5RH) with defective fluorite structure was successfully prepared by the emerging ultrafast high-temperature sintering (UHS) in less than six minutes. The 5RH ceramic possessed a higher thermal expansion coefficient (11.23 ×10^?6/K, 1500 °C) and extremely low thermal conductivity (0.94 W/(m·k), 1300 ℃) owing to the larger lattice distortion of high-entropy materials. After high-temperature annealing at 1500 ℃, the 5RH showed extremely sluggish grain growth characteristics and excellent high-temperature phase stability, mainly attributed to the non-equilibrium sintering characteristic of the UHS and the sluggish diffusion effect of high-entropy materials. Therefore, (Y_0.2Dy_0.2Er_0.2Tm_0.2Yb_0.2)₄Hf₃O₁₂ has excellent potential as a next-generation thermal barrier coating material to replace traditional Y₂O₃ stabilized ZrO₂. Finally, using the UHS to prepare high-entropy ceramics provides a new technique for fast-sintering and developing next-generation thermal barrier coating materials.     

Tuning stoichiometry of high-entropy oxides for tailorable thermal expansion coefficients and low thermal conductivity

Thermal barrier coating materials with proper thermal expansion coefficient (TEC), low thermal conductivity, and good high-temperature stability are of great significance for their applications in next-generation turbine engines. Herein, we report a new class of high-entropy (La_0.2Sm_0.2Er_0.2Yb_0.2Y_0.2)₂Ce_xO_3+2x with different Ce⁴⁺ contents synthesized by a solid-state reaction method. They exhibit different crystal structures at different Ce⁴⁺ content, including a bixbyite single phase without Ce⁴⁺ doping (x = 0), bixbyite-fluorite dual-phase in the RE₂O₃-rich region (0 < x < 2), and fluorite single phase in the stoichiometric (x = 2) and CeO₂-rich region (x > 2). The high-entropy (La_0.2Sm_0.2Er_0.2Yb_0.2Y_0.2)₂Ce_xO_3+2x exhibit tailorable TECs at a large range of 9.04 × 10^–6–13.12 × 10^–6 °C^–1 and engineered low thermal conductivity of 1.79–2.63 W·m^–1·K^–1. They also possess good sintering resistance and high-temperature phase stability. These results reveal that the high-entropy (La_0.2Sm_0.2Er_0.2Yb_0.2Y_0.2)₂Ce_xO_3+2x are promising candidates for thermal barrier coating materials as well as thermally insulating materials and refractories.     

Novel (Sm0.2Lu0.2Yb0.2Y0.2Dy0.2)3TaO7 high-entropy ceramic for thermal barrier coatings

A novel (Sm_0.2Lu_0.2Dy_0.2Yb_0.2Y_0.2)₃TaO₇ (SLT-5RE_0.2) oxide with a single-fluorite structure was synthesized via an optimized sol-gel and sintering method, and its crystal structure, mechanical and thermophysical properties were investigated. The results indicate that the calcined nanoscale powder is of high crystallinity, and bulk sample is of a uniform elemental distribution. Compared to YSZ (6–8 wt.% Y₂O₃ partially stabilized by ZrO₂), SLT-5RE_0.2 exhibits lower Young's modulus, less mean acoustic velocity, and higher Vickers microhardness. Owing to the strengthened anharmonic vibration and phonon scattering, SLT-5RE_0.2 exhibits low thermal conductivity (1.107 W K^?1·m^?1, 900 °C). The high thermal expansion coefficient (11.3 × 10^?6 K^?1, 1200 °C) of SLT-5RE_0.2 ceramic can be ascribed to the reduced lattice energy and ionic spacing as well as the cocktail effect of high-entropy ceramics. The excellent mechanical and thermophysical properties, and excellent phase steadiness during the whole testing temperature cope, indicate that SLT-5RE_0.2 high-entropy ceramic can be a candidate material for thermal barrier coatings.     

High-entropy transparent (Y0.2La0.2Gd0.2Yb0.2Dy0.2)2Zr2O7 ceramics as novel phosphor materials with multi-wavelength excitation and emission properties

High-entropy ceramics have been extensively studied because of their novel intrinsic properties and have significant potential for application in various fields. In this study, a novel high-entropy transparent ceramic phosphor (Y_0.2La_0.2Gd_0.2Yb_0.2Dy_0.2)₂Zr₂O₇ was successfully prepared via a solid-state reaction and vacuum sintering. X-ray diffraction and scanning electron microscopy analyses were performed to analyze the phases and microstructures of the as-prepared powders and sintered ceramics. The highest in-line transmittance of the developed ceramic was 74 % in both visible and infrared regions. To reveal its luminescent properties as a potential WLED material, the photoluminescence of ceramic samples was analyzed using multi-excitation and emission spectra. Strong emissions originating from Dy³⁺ and Gd³⁺ were observed, and the emission color was effectively regulated under multi-wavelength excitation. Combining excellent optical transmittance with unique photoluminescence performance, the (Y_0.2La_0.2Gd_0.2Yb_0.2Dy_0.2)₂Zr₂O₇ high-entropy transparent ceramics can find potential applications as a novel WLED material with multi-wavelength excitation and tunable emission.     

Single-phase rare-earth high-entropy zirconates with superior thermal and mechanical properties

Emerging of high-entropy ceramics has brought new opportunities for designing and optimizing materials with desired properties. In the present work, high-entropy rare-earth zirconates (La_0.2Nd_0.2Sm_0.2Eu_0.2Gd_0.2)₂Zr₂O₇ and (Yb_0.2Nd_0.2Sm_0.2Eu_0.2Gd_0.2)₂Zr₂O₇ are designed and synthesized. Both high-entropy ceramics exhibit a single pyrochlore structure with excellent phase stability at 1600 °C. In addition, the Yb-containing system possesses a high coefficient of thermal expansion (10.52 × 10^?6 K^-1, RT～1500 °C) and low thermal conductivity (1.003 W·m^-1 K^-1, 1500 °C), as well as excellent sintering resistance. Particularly, the Yb-containing system has significantly improved fracture toughness (1.80 MPa·mm^1/2) when compared to that of lanthanum zirconate (1.38 MPa·mm^1/2), making it a promising material for thermal barrier coatings (TBCs) applications. The present work indicates that the high-entropy design can be applied for further optimization of the comprehensive properties of the TBCs materials.     

Calcium-Magnesium-Aluminosilicate (CMAS) corrosion resistance of high entropy rare-earth phosphate (Lu0.2Yb0.2Er0.2Y0.2Gd0.2)PO4: A novel environmental barrier coating candidate

Single phase (Lu_0.2Yb_0.2Er_0.2Y_0.2Gd_0.2)PO₄ was synthesized, and its thermal properties and CMAS resistance were investigated to explore its potential as an environmental barrier coating (EBC) candidate. The high entropy phosphate (Lu_0.2Yb_0.2Er_0.2Y_0.2Gd_0.2)PO₄ displays a lower thermal conductivity (2.86 W m⁻¹ K⁻¹ at 1250 K) than all the single component xenotime phase rare-earth phosphates. Interaction of (Lu_0.2Yb_0.2Er_0.2Y_0.2Gd_0.2)PO₄ pellets with CMAS at 1300 °C led to the formation of a dense and uniformed Ca₈MgRE(PO₄)₇ reaction layer, which halted the CMAS penetration into the bulk pellet. At 1400 and 1500 °C the (Lu_0.2Yb_0.2Er_0.2Y_0.2Gd_0.2)PO₄-CMAS corrosion showed CMAS penetrating beyond the reaction layer into the bulk pellet via the grain boundaries, and SiO₂ precipitates remaining at the pellet surface. The effects of duration, temperature, and compositions on the resistance against CMAS corrosion are discussed within the context of optimizing materials design and performance of high entropy rare-earth phosphates as candidates for advanced EBC applications.     

A new type of Sr(Zr0.2Hf0.2Ce0.2Yb0.2Me0.2)O3−x (Me = Y,Gd) high-entropy ceramics used in thermal barrier coatings

Seeking for new ceramics with excellent thermophysical properties as thermal barrier coatings candidate materials has become a hot research field. In this study, Sr(Zr_0.2Hf_0.2Ce_0.2Yb_0.2Me_0.2)O_3−x high-entropy ceramic powders were successfully synthesized by the method of solid-state reaction, and the ceramics with single phase were prepared by pressureless sintering at 1600°C. The phase composition, microstructure, element distribution, high-temperature thermal stability, and thermophysical properties of the ceramics were studied. The results showed that Sr(Zr_0.2Hf_0.2Ce_0.2Yb_0.2Me_0.2)O_3−x ceramics were composed of SrZrO₃ phase and the second phase of AB₂O₄ spinel (i.e., SrY₂O₄ and SrGd₂O₄). The content of the second phase was gradually increased after heat treatment at 1400°C, which significantly improved the thermophysical and mechanical properties of the ceramics. The microhardness and fracture toughness of the ceramics were improved compared with that of SrZrO₃. The thermal conductivities of Sr(Zr_0.2Hf_0.2Ce_0.2Yb_0.2Me_0.2)O_3−x (Me = Y, Gd) ceramics were 1.30 and 1.28 W m⁻¹ K⁻¹ at 1000°C, which were about 35% and 40% lower than that of SrZrO₃ (1.96 W m⁻¹ K⁻¹) and yttria-stabilized zirconia (2.12 W m⁻¹ K⁻¹), respectively. The thermal expansion coefficients of Sr(Zr_0.2Hf_0.2Ce_0.2Yb_0.2Me_0.2)O_3−x (Me = Y, Gd) ceramics were 12.8 × 10⁻⁶ and 14.1 × 10⁻⁶ K⁻¹ at 1300°C, respectively, which was more closer to the superalloys compared with SrZrO₃ ceramic (11.0 × 10⁻⁶ K⁻¹).     

Irradiation induced structural damage and evolution of mechanical properties in high entropy fluorite oxide

Pursuing material with excellent irradiation resistance, high chemical durability, and stable mechanical properties under extreme conditions is of great significance for developing irradiation-resistant materials. Herein, a novel irradiation-resistant high-entropy fluorite oxide (Nd_0.2Sm_0.2Gd_0.2Dy_0.2Er_0.2)₂Ce₂O₇ is reported. After 9-MeV Au ion irradiation with ion fluence of 2.7 × 10¹⁵ and 4.5 × 10¹⁵ ions/cm², the high-entropy (Nd_0.2Sm_0.2Gd_0.2Dy_0.2Er_0.2)₂Ce₂O₇ shows excellent phase stability without phase decomposition and transformation. In comparison with Nd₂Ce₂O₇, the high-entropy (Nd_0.2Sm_0.2Gd_0.2Dy_0.2Er_0.2)₂Ce₂O₇ possesses much less amorphization and lattice expansion, suggesting its improved irradiation resistance. No pronounced variation in Raman spectra can be detected in the post-irradiated structure, implying rarely structural shift arises in high-entropy (Nd_0.2Sm_0.2Gd_0.2Dy_0.2Er_0.2)₂Ce₂O₇. After irradiation, there is no irradiation-induced segregation at grain boundaries or inside the grains of high-entropy (Nd_0.2Sm_0.2Gd_0.2Dy_0.2Er_0.2)₂Ce₂O₇. The nanoindentation tests reveal that the mechanical properties of the high-entropy fluorite oxide rarely degrade. The results, along with the insight into the mechanism of heavy-ion irradiation resistance, provide insight for the subsequent research on the heavy-ion irradiation of high-entropy ceramics.     

Phase evolution and thermal stability of novel high-entropy (Mo0.2Nb0.2Ta0.2V0.2W0.2)Si2 ceramics

Owing to the high melting points and high-temperature stability, transition-metal disilicides are potential components for aerospace, automotive, and industrial engineering applications. However, unwanted oxidation known as PEST oxidation severely limits their application owing to the formation of volatile transition metal oxides, especially in the temperature range of 500–1000 °C. To overcome this problem, a new class of high-entropy disilicides, (Mo_0.2Nb_0.2Ta_0.2V_0.2W_0.2)Si₂, was selected by first-principles calculations and then successfully fabricated using a hot-pressing sintering technique. Furthermore, the phase evolution, thermal expansion behavior, thermal conductivity, and oxidation behavior were systematically investigated. Compared with MoSi₂, (Mo_0.2Nb_0.2Ta_0.2V_0.2W_0.2)Si₂ possessed a lower thermal conductivity (10.9–14.7 W·m^?1·K^?1) at 25–1000 °C, higher thermal expansion coefficients (8.6 ± 1.3^–6 K^–1) at 50–1200 °C, and especially an excellent thermal stability at 500–1000 °C owing to slow diffusion and selective oxidation. This work provides a strong foundation for the synthesis and application of high-entropy disilicides.     

Dual-phase rare-earth-zirconate high-entropy ceramics with glass-like thermal conductivity

A series of rare earth zirconates (RE₂Zr₂O₇) high-entropy ceramics with single- and dual-phase structure were prepared. Compared with La₂Zr₂O₇ and Yb₂Zr₂O₇, the smaller “rattling” ions (Yb³⁺, Er³⁺, Y³⁺) have been incorporated into pyrochlore lattice in (La_0.2Nd_0.2Y_0.2Er_0.2Yb_0.2)₂Zr₂O₇ (LNYEY) while larger ions (La³⁺, Nd³⁺, Sm³⁺, Eu³⁺) incorporated into fluorite lattice in (La_0.2Nd_0.2Sm_0.2Gd_0.2Yb_0.2)₂Zr₂O₇ (LNSGY). Due to high-entropy lattice distortion and resonant scattering derived from smaller ions Yb³⁺, Er³⁺, and Y³⁺, LNYEY shows a lower glass-like thermal conductivity (1.62-1.59 W m^-1 K^-1, 100-600℃) than LNSGY (1.74-1.75 W m^-1 K^-1, 100-600℃). Moreover, LNYEY and LNSGY exhibit enhanced Vickers’ hardness (LNYEY, H_v = 11.47 ± 0.41 GPa; LNSGY, H_v = 10.96 ± 0.26 GPa) and thermal expansion coefficients (LNYEY, 10.45 × 10^-6 K^-1, 1000℃; LNSGY, 11.02 × 10^-6 K^-1, 1000℃). These results indicate that dual-phase rare-earth-zirconate high-entropy ceramics could be desirable for thermal barrier coatings.     

Directionally solidified Al2O3/(Y0.2Er0.2Yb0.2Ho0.2Lu0.2)3Al5O12 eutectic high-entropy oxide ceramics with well-oriented structure,high hardness,and low thermal conductivity

Directionally solidified Al₂O₃/(Y_0.2Er_0.2Yb_0.2Ho_0.2Lu_0.2)₃Al₅O₁₂ eutectic high-entropy oxide ceramics (HEOCs) were successfully prepared with an optical floating zone furnace. The Al₂O₃/(Y_0.2Er_0.2Yb_0.2Ho_0.2Lu_0.2)₃Al₅O₁₂ eutectic HEOCs were pure phases with uniform distribution of rare-earth elements. The preferred growth orientation relationships were <10−10 > {0001}Al₂O₃ // <110 > {211}(Y_0.2Er_0.2Yb_0.2Ho_0.2Lu_0.2)₃Al₅O₁₂. The indentation fracture toughness and Vickers hardness were 6.8 ± 0.9 MPa·m^1/2 and 16.1 ± 0.3 GPa, which were higher than that of Al₂O₃/Y₃Al₅O₁₂ eutectic ceramics. The room temperature bending strength was 333 ± 42 MPa. Crack bridging, deflection and bifurcation were the main toughening mechanism. Hardness and reduced modulus mapping results illustrated that the hardness of (Y_0.2Er_0.2Yb_0.2Ho_0.2Lu_0.2)₃Al₅O₁₂ was close to that of Al₂O₃. Thermal expansion coefficient of Al₂O₃/(Y_0.2Er_0.2Yb_0.2Ho_0.2Lu_0.2)₃Al₅O₁₂ eutectic HEOCs was very similar to that of Al₂O₃/Y₃Al₅O₁₂ but thermal conductivity was as low as 4.9 Wm⁻¹ K⁻¹ due to strong lattice distortion. These results suggest that high-entropy Al₂O₃/(Y_0.2Er_0.2Yb_0.2Ho_0.2Lu_0.2)₃Al₅O₁₂ eutectic ceramics are promising candidates for structural components application in gas turbine engines.     

New class of high-entropy rare-earth niobates with high thermal expansion and oxygen insulation

Tailoring the structure and properties of materials using the high-entropy (HE) effect is of significant interest in the fields of environmental and thermal barrier coatings (TBCs). In this work, a new class of dense HE rare-earth niobates was successfully prepared by a solid-phase reaction method, including (Sm_1/5Dy_1/5Ho_1/5Er_1/5Yb_1/5)NbO₄ (5HERN), (Sm_1/6Dy_1/6Ho_1/6Er_1/6Yb_1/6Lu_1/6)NbO₄ (6HERN), (Sm_1/7Dy_1/7Ho_1/7Er_1/7Yb_1/7Lu_1/7Gd_1/7)NbO₄ (7HERN), and (Sm_1/8Dy_1/8Ho_1/8Er_1/8Yb_1/8Lu_1/8Gd_1/8Tm_1/8)NbO₄ (8HERN), along with eight single rare-earth niobates (RENbO₄, RE = Sm, Dy, Ho, Er, Yb, Lu, Gd, and Tm). X-ray diffraction analysis showed that 5–8HERN are single-phase solid solutions with a monoclinic structure (space group C12/c1). The thermal expansion coefficients of 7HERN and 8HERN exceed 11 × 10⁻⁶ K⁻¹ at 1200°C and are much higher than those of the RENbO₄ compositions (10.13–10.74 × 10⁻⁶ K⁻¹) and other some HE rare-earth oxides (10.27–10.87 × 10⁻⁶ K⁻¹). Importantly, 5–8HERN have lower oxygen-ion conductivity and higher activation energy than yttrium-stabilized zirconia (YSZ) and the RENbO₄ compositions. The oxygen-ion conductivity of 5HERN (7.52 × 10⁻⁷ S cm⁻¹, 900°C) was 10⁵ times lower than that of YSZ (0.01 S cm⁻¹, 750°C). The hardness of 5–8HERN is ∼7.81–8.46 GPa and these compositions have low intrinsic lattice thermal conductivity at high temperature (1.28–1.69 W m⁻¹ K⁻¹ at 900°C). The mechanism by which the HE effect improved the material properties was elucidated. Young's modulus, hardness, thermal expansion coefficient, and intrinsic lattice thermal conductivity are linearly related to the mass, size, and distortion degree of samples. In contrast, the oxygen-ion conductivity depends on both the degrees of disorder and distortion and the oxygen-ion vacancy concentration. Based on their overall performance, especially their high thermal expansion coefficients and excellent oxygen-barrier performance, HE rare-earth niobates show potential for further development as TBC materials.     

Thermophysical and electrical properties of rare-earth-cerate high-entropy ceramics

A new series of rare-earth-cerate high-entropy ceramics with compositions of (La_0.2Nd_0.2Sm_0.2Gd_0.2Dy_0.2)₂Ce₂O₇ (HEC1), (La_0.2Nd_0.2Sm_0.2Gd_0.2Yb_0.2)₂Ce₂O₇ (HEC2), (La_0.2Nd_0.2Sm_0.2Yb_0.2Dy_0.2)₂Ce₂O₇ (HEC3), (La_0.2Nd_0.2Yb_0.2Gd_0.2Dy_0.2)₂Ce₂O₇ (HEC4), (La_0.2Yb_0.2Sm_0.2Gd_0.2Dy_0.2)₂Ce₂O₇ (HEC5) as well as a single component of Nd₂Ce₂O₇ are fabricated via sintering the corresponding sol–gel-derived powders at 1600°C for 10 h. HEC1–5 samples exhibit a single-cerate phase with fluorite structure and high configurational entropy. Compared with Nd₂Ce₂O₇, HEC1–5 samples have a lower grain growth rate owing to the sluggish diffusion effect. The chemical compositional uniformity of HEC1–5 as well as Nd₂Ce₂O₇ does not apparently change after annealing at 1500°C for different time intervals (1, 6, 12, and 18 h). Compared with 8YSZ, HEC1–5 samples display the decreased thermal conductivity and increased thermal expansion coefficient. The lattice size disorder parameter of HEC1–5 is negatively related to the thermal conductivity in 26–450°C. Furthermore, HEC1–5 and Nd₂Ce₂O₇ exhibit lower oxygen-ion conductivity, meaning an increased resistance to oxygen diffusion.     

Novel high-entropy microwave dielectric ceramics Sr(La0.2Nd0.2Sm0.2Eu0.2Gd0.2)AlO4 with excellent temperature stability and mechanical properties

Novel high-entropy Sr(La_0.2Nd_0.2Sm_0.2Eu_0.2Gd_0.2)AlO₄ ceramics with a layered perovskite structure have been prepared via the standard solid-state reaction method. The design of high-entropy improves the bond valence and subsequently optimizes the large negative temperature coefficient of resonant frequency (τ_f = ?32 ppm/°C) of the simple SrLaAlO₄ ceramics. Excellent temperature stability (τ_f = ?6 ppm/°C) together with a relative permittivity (ε_r) of 18.6 and a quality factor (Qf = 14,509 GHz) are obtained in Sr(La_0.2Nd_0.2Sm_0.2Eu_0.2Gd_0.2)AlO₄ ceramics sintered at 1475 °C. It indicates that the present ceramics have great application prospects in passive microwave components such as resonators and filters. Meanwhile, significant improvements in compressive strength and strain are achieved, which are 1040 MPa and 15.7% for Sr(La_0.2Nd_0.2Sm_0.2Eu_0.2Gd_0.2)AlO₄ compared to 583 MPa and 12% in SrLaAlO₄. The enhanced mechanical properties originate from the dislocation strengthening mechanism as the intertwining of interlayer lattices is revealed from the high-resolution transmission electronic micrographs.     

La2Zr2O7 based high entropy ceramic with a low thermal conductivity and enhanced CMAS corrosion resistance

Herein, five new La₂Zr₂O₇ based high-entropy ceramic materials, such as (La_0.2Ce_0.2Gd_0.2Y_0.2Er_0.2)₂Zr₂O₇, (La_0.2Ce_0.2Gd_0.2Er_0.2Sm_0.2)₂Zr₂O₇, (La_0.2Gd_0.2Y_0.2Er_0.2Sm_0.2)₂Zr₂O₇, (La_0.2Ce_0.2Y_0.2Er_0.2Sm_0.2)₂Zr₂O₇, (La_0.2Ce_0.2Gd_0.2Y_0.2Sm_0.2)₂Zr₂O₇), were synthesized using a sol-gel and high-temperature sintering (1000 °C) method. The spark plasma sintered (SPS) (La_0.2Ce_0.2Gd_0.2Er_0.2Sm_0.2)₂Zr₂O₇ pellet shows a low thermal conductivity of 1.33 W m^-1 K^-1 at 773 K, and it also exhibits better CaO–MgO–Al₂O₃–SiO₂ corrosion resistance than that of Y₂O₃ stabilized ZrO₂. It shows that (La_0.2Ce_0.2Gd_0.2Er_0.2Sm_0.2)₂Zr₂O₇ has a promising application potential as a thermal barrier coating.     

The effect of rare-earth oxide addition on the hot-pressing of magnesium silicon nitride

The effect of rare-earth oxide addition (1–5 mass% of Ln₂O₃ addition; Ln=Y, La, Nd, Sm, Gd, Dy, Er, and Yb) on the properties of hot-pressed (1550 °C, 90 min, 31 MPa) magnesium silicon nitride (MgSiN₂) compact (ceramic) has been investigated. The role of rare-earth oxide addition on the relative density was classified as follows: (i) positive effect (Y₂O₃, La₂O₃, and Yb₂O₃ addition), (ii) no appreciable effect (Nd₂O₃ and Er₂O₃ addition), and (iii) negative effect (Sm₂O₃, Gd₂O₃, and Dy₂O₃ addition). The grain sizes of the MgSiN₂ ceramics with rare-earth oxide addition were almost comparable to or slightly smaller than those of the pure MgSiN₂ ceramic. The average Vickers hardness of the MgSiN₂ ceramic with 1 mass% of Y₂O₃ addition showed the highest value (21.5 GPa) amongst the MgSiN₂ ceramics with rare-earth oxide addition. The thermal conductivity of the MgSiN₂ ceramic had a maximum for the case of 1 mass% of Yb₂O₃ addition (26.6 W·m⁻¹·K⁻¹) and was believed to be the highest value so far reported for MgSiN₂ ceramic. It was concluded that the relative density and Vickers hardness were best enhanced through the use of Y₂O₃ addition, whereas the addition of Yb₂O₃ was most suitable for enhancing the thermal conductivity.