Thermal shock resistance of tri‐layer Yb2SiO5/Yb2Si2O7/Si coating for SiC and SiC‐matrix composites

A new tri‐layer Yb₂SiO₅/Yb₂Si₂O₇/Si coating was fabricated on SiC, C/SiC, and SiC/SiC substrates, respectively, using atmospheric plasma spray (APS) technique. All coated samples were subjected to thermal shock test at 1350°C. The evolution of phase composition and microstructure and thermo‐mechanical properties of those samples before and after thermal shock test were characterized. Results showed that adhesion between all the 3 layers and substrates appeared good. After thermal shock tests, through microcracks which penetrated the Yb₂SiO₅ top layer were mostly halted at the Yb₂SiO₅‐Yb₂Si₂O₇ interface and no thermal growth oxide (TGO) was formed after 40‐50 quenching cycles, implying the excellent crack propagation resistance of the environmental barrier coating (EBC) system. Transmission electron microscopy analysis confirmed that twinnings and dislocations were the main mechanisms of plastic deformation of the Yb₂Si₂O₇ coating, which might have positive effects on crack propagation resistance. The thermal shock behaviors were clarified based on thermal stresses combined with thermal expansion behaviors and elastic modulus analysis. This study provides a strategy for designing EBC systems with excellent crack propagation resistance.     

Property evolutions of Si/mixed Yb2Si2O7 and Yb2SiO5 environmental barrier coatings completely wrapping up SiCf/SiC composites under 1300 °C water vapor corrosion

A bi-layer environmental barrier coating (EBC) consisting of silicon(Si) bond coat/mixed ytterbium disilicate (Yb₂Si₂O₇) and ytterbium monosilicate (Yb₂SiO₅) topcoats has been successfully prepared to completely wrap up the SiC_f/SiC composites and the protective effects of such EBC have been evaluated by soaking them in a mixed 50% O₂ and 50% H₂O corrosive gases at 1300 °C for various times. In topcoats, Yb₂Si₂O₇ is the major phase, providing good thermal expansion coefficient (CTE) matching with composite substrate and thus excellent thermal shock resistance, whereas Yb₂SiO₅ is the dispersing minor phase, providing improved water vapor corrosion resistance. The completely wrapping up of SiC_f/SiC composites by above EBC system is employed to avoid direct exposure to the corrosive conditions, making it possible to evaluate the genuine protection effects of current EBCs. Under 1300 °C water vapor corrosion, the mass change, the phase composition and the evolution of microstructure are investigated, which suggest that the bi-layer EBC has excellent performance on protecting SiC_f/SiC composites from water vapor corrosion at 1300 °C.     

Fatigue of a SiC/SiC ceramic composite with an ytterbium-disilicate environmental barrier coating at elevated temperature*

Tension-tension fatigue performance of a SiC/SiC composite with an ytterbium-disilicate environmental barrier coating (EBC) was investigated at 1200°C in air and steam. The composite is reinforced with Hi-Nicalon™ SiC fibers and has a melt-infiltrated matrix processed by chemical vapor infiltration of SiC with subsequent infiltration with SiC particulate slurry and molten silicon. The EBC consists of a Si bond coat and an Yb₂Si₂O₇ top coat applied via air plasma spraying. Tensile properties were evaluated at 1200°C. Tension-tension fatigue was examined for maximum stresses of 110-140 MPa. To assess the efficacy of EBC, experimental results obtained for the coated composite are compared to those for a control uncoated composite. Surface grit-blasting inherent in the EBC application process degrades tensile strength of the composite. However, the EBC effectively protects the composite from oxidation embrittlement during cyclic loading in air or steam. Fatigue runout set to 200 000 cycles (55.6 hours at a frequency of 1.0 Hz) was achieved at 110 MPa in air and steam. Retained properties of pre-fatigued specimens were characterized. Composite microstructure, along with damage and failure mechanisms were investigated. Damage and failure of the composite are attributed to the growth of cracks originating from numerous processing defects in the composite interior.     

Thermal shock resistance and bonding strength of tri-layer Yb2SiO5/mullite/Si coating on SiCf/SiC composites

A Yb₂SiO₅/mullite/Si tri-layer environmental-barrier-coating (EBC) were coated on SiC_f/SiC substrates via Air Plasma Spraying (APS). The thermal cycle tests (TCT) were conducted under thermal corrosive condition of vapor-oxygen (50 vol% H₂O and 50 vol% O₂) with thermal shock from 1200 °C to 200 °C. Microstructures, weight loss and bonding strength of the samples were systemically investigated after 101, 396, 606 and 700 TCT cycles respectively. The results show that the corner of the tri-layer coating peel off from the sample with weight loss of 1.3% after 700 TCT cycles. The bonding strength between substrate and tri-layer coatings gradually decreases to 6.79 MPa (approximately 55.2% of virgin specimens) after 700 cycles due to thermal shock induced cracks distributed horizontally within Si layers and between Si layer and outer layers.     

Effect of SiC whiskers on the anti-oxidation properties of Yb2Si2O7/mullite/SiC tri-layer environmental barrier coating for CMCs

The mullite and ytterbium disilicate (β-Yb₂Si₂O₇) powders as starting materials for the Yb₂Si₂O₇/mullite/SiC tri-layer coating are synthesized by a sol–gel method. The effect of SiC whiskers on the anti-oxidation properties of Yb₂Si₂O₇/mullite/SiC tri-layer coating for C/SiC composites in the air environment is deeply studied. Results show that the formation temperature and complete transition temperature of mullite were 800–1000 and 1300°C, respectively. Yb₂SiO₅, α-Yb₂Si₂O₇, and β-Yb₂Si₂O₇ were gradually formed between 800 and 1000°C, and Yb₂SiO₅ and α-Yb₂Si₂O₇ were completely transformed into β-Yb₂Si₂O₇ at a temperature above 1200°C. The weight loss of Yb₂Si₂O₇/(SiC_w–mullite)/SiC tri-layer coating coated specimens was 0.15 × 10⁻³ g cm⁻² after 200 h oxidation at 1400°C, which is lower than that of Yb₂Si₂O₇/mullite/SiC tri-layer coating (2.84 × 10⁻³ g cm⁻²). The SiC whiskers in mullite middle coating can not only alleviate the coefficient of thermal expansion difference between mullite middle coating and β-Yb₂Si₂O₇ outer coating, but also improve the self-healing performance of the mullite middle coating owing to the self-healing aluminosilicate glass phase formed by the reaction between SiO₂ (oxidation of SiC whiskers) and mullite particles.     

Steam oxidation and microstructural evolution of rare earth silicate environmental barrier coatings

A primary failure mode for environmental barrier coatings (EBCs) on SiC ceramic matrix composites (CMCs) is the oxidation of the intermediate Si-bond coating, where the formation of SiO₂ at the bond coating–EBC interface results in debonding and spallation. This work compares the microstructure evolution and steam oxidation kinetics of the Si-bond coating beneath yttrium/ytterbium disilicate ((Y/Yb)DS) and ytterbium disilicate/monosilicate (YbDS/YbMS) EBCs to better understand the impact of EBC composition on oxidation kinetics. After 500 1-h cycles at 1350°C, (Y/Yb)DS displayed a decreasing concentration of the monosilicate minor phase and increasing concentration of porosity as furnace cycling time increased, whereas the YbDS/YbMS EBC displayed negligible microstructural evolution. For both EBC systems, thermally grown oxide growth rates in steam were found to increase by approximately an order magnitude compared to dry air oxidation. The (Y/Yb)DS EBC displayed a reduced steam oxidation rate compared to YbDS/YbMS.     

High-temperature performances of Si-HfO2-based environmental barrier coatings via atmospheric plasma spraying

To improve high-temperature bearing capability of coatings, novel agglomerated Si-HfO₂ powders were prepared by adding HfO₂ powders into original Si powders by spray drying method. Three-layer environmental barrier coatings (EBCs) with Si-HfO₂ bond layer, Yb₂Si₂O₇ intermediate layer and Yb₂SiO₅ surface layer were prepared on SiC ceramic substrates by atmospheric plasma spraying (APS). The high temperature properties of coatings were systematically investigated. The results indicated that the coatings had good high temperature oxidation resistance, and remained intact after being oxidized or steam corrosion at 1400 °C for 500 h, so the addition of HfO₂ improved the thermal cycling performances of the coating. The HfO₂ in Si bond coating could effectively inhibit the growth of thermal grown oxide at high temperatures. This work indicates that the high temperature properties of the coatings are improved by this novel EBCs using the novel agglomerated Si-HfO₂ powders.     

Feasibility research of Yb3Al5O12 garnet as environmental barrier coating materials

In this work, Yb₃Al₅O₁₂ (YbAG) garnet, as a new material for environment barrier coating (EBC) application, was synthesized and prepared by atmospheric plasma spraying (APS). The phases and microstructures of the coatings were characterized by XRD, EDS and SEM, respectively. The thermal stability was measured by TG-DSC. The mechanical and thermal-physical properties, including Vickers hardness (H_v), fracture toughness (K_IC), Young's modulus (E), thermal conductivity (κ) and coefficient of thermal expansion (CTE) were also measured. The results showed that the as-sprayed coating was mainly composed of crystalline Yb₃Al₅O₁₂ and amorphous phase which crystallized at around 917 °C. Moreover, it has a hardness of 6.81 ± 0.23 GPa, fracture toughness of 1.61 ± 0.18 MPa m^1/2, as well as low thermal conductivity (0.82–1.37 W/m·K from RT-1000 °C) and an average coefficient of thermal expansion (CTE) (∼6.3 × 10⁻⁶ K⁻¹ from RT to 660 °C). In addition, the thermal shock and water-vapor corrosion behaviors of the Yb₃Al₅O₁₂-EBC systems on the SiC_f/SiC substrates were investigated and their failure mechanisms were analyzed in details. The Yb₃Al₅O₁₂ coating has an average thermal shock lifetime of 72 ± 10 cycles as well as an excellent resistance to steam. These combined properties indicated that the Yb₃Al₅O₁₂ coating might be a potential EBC material. Both the thermal shock failure and the steam recession of the Yb₃Al₅O₁₂-EBC systems are primarily associated with the CTE mismatch stress.     

Mechanisms of Ytterbium Monosilicate/Mullite/Silicon Coating Failure During Thermal Cycling in Water Vapor

An air plasma spray process has been used to apply a model tri‐layer Yb₂SiO₅/Al₆Si₂O₁₃/Si environmental barrier coating system on SiC test coupons. Significant differences in the thermal expansion of the component layers resulted in periodically spaced mud cracks in the Yb₂SiO₅ and Al₆Si₂O₁₃ layers. Upon thermal cycling between 1316°C and 110°C in a 90% H₂O/10% O₂ environment flowing at 4.4 cm/s, it was found that partial delamination occurred with the fracture plane located within a thermally grown oxide (TGO) at the Al₆Si₂O₁₃–Si interface. Delamination initiated at test coupon edges where the gaseous environment preferentially oxidized the exposed Si bond coat to form β‐cristobalite. Simultaneous ingress of the gaseous environment through mud cracks initiated local formation of β‐cristobalite (SiO₂), the thickness of which was greatest directly below mud cracks. Upon cooling, cristobalite transformed from the β to α phase with a large, constrained volume contraction that resulted in severe microfracture of the TGO. Continued thermal cycling eventually propagated delamination cracks and caused partial spallation of the coatings. Formation of the cristobalite TGO appears to be the delamination life‐determining factor in protective coating systems utilizing a Si bond coat.     

Microstructure evolution and thermomechanical properties of plasma‐sprayed Yb2SiO5 coating during thermal aging

Rare‐earth monosilicates (RE₂SiO₅, RE: rare‐earth elements), such as Yb₂SiO₅, have been developed for potential application as environmental barrier coating (EBC) materials. Yb₂SiO₅ coating would experience microstructure evolution under high‐temperature environment and accordingly its thermomechanical properties would be altered. In this study, Yb₂SiO₅ coating was fabricated by atmospheric plasma spray technique. The phase stability and microstructure change before and after thermal aging at 1300°C, 1400°C, and 1500°C were investigated. The changes in mechanical and thermal properties were characterized. The results showed that the as‐sprayed coating was mainly composed of Yb₂SiO₅ with a small amount of Yb₂O₃ and amorphous phase. Defects in the coating, including interfaces, pores, and microcracks, were greatly reduced with grain growth after thermal treatment. Thermal aging significantly modified the thermal and mechanical properties of the coating. The average CTE was increased by 13.1%, and the hardness and elastic modulus was increased by 42.4% and 49.4%, respectively, after thermal aging at 1500°C for 50 hour. The thermal conductivity of thermal‐aged coating was much higher than that of the as‐sprayed coating, which was still less than 2 W/(m·K). The influence of coating microstructure on the properties was analyzed and related to the failure mechanism of EBCs.     

Yttrium Bearing Silicon Carbide Matrices for Robust Ceramic Composites

Application of SiC‐based ceramic matrix composites (CMCs) in combustion environments demands the use of an environmental barrier coating (EBC) to prevent volatilization of the protective SiO₂ scale in flowing water vapor. The EBC only provides protection while present on the surface; cracking and spallation of the coating leaves the underlying SiC vulnerable to the oxidation–volatilization processes. A robust matrix material chemically tailored to regrow a yttrium silicate scale in the event of EBC loss has been developed by incorporating yttrium bearing species including YB₂, Y₂O₃, and Y₅Si₃ into the SiC. During oxidation a borosilicate glass helps seal cracks while Y₂O₃ and SiO₂ react to form Y₂Si₂O₇ for environmental protection. Candidate compositions were oxidized for 10 min to 100 h at 1400°C and for 24 h at 1500°C to understand the scale growth. The prospects for effectively applying this approach in CMCs are discussed.     

Dry air cyclic oxidation of mixed Y/Yb disilicate environmental barrier coatings and bare silica formers

Mixed Y and Yb disilicate coatings (Y/Yb)DS have been proposed as dual function thermal and environmental barrier coatings (EBCs) for protecting SiC-based ceramic matrix composites in gas-turbine environments. As an initial step, the 1350 °C dry air cyclic oxidation of atmospheric plasma sprayed (Y_1.2/Yb_0.8)DS and ytterbium disilicate/ytterbium monosilicate (YbDS/YbMS) EBCs deposited onto Si bond coatings was compared. As a baseline for evaluating EBC oxidant permeability, the dry air cyclic oxidation scale growth rates for bare silica formers (SiC, Si) were also measured and were consistently higher than rates previously measured after isothermal oxidation. Regarding Si bond coat oxidation rates underlying (Y/Yb)DS and YbDS/YbMS EBCs, the thinner silica scale formed under the thinner and denser (Y/Yb)DS coatings suggested a lower oxidant permeability than YbDS/YbMS. After 500 1-h cycles, the (Y/Yb)DS coating was comprised of only the β-polymorph disilicate and minor amounts of the X-2 phase monosilicate phase. Negligible differences in oxidation kinetics for (Y/Yb)DS coatings over the 90 – 240 µm thickness range were observed.     

Steam oxidation of ytterbium disilicate environmental barrier coatings with and without a silicon bond coat

The current generation of multilayer Si/Yb₂Si₂O₇ environmental barrier coatings (EBCs) are temperature limited by the melting point of Si, 1414°C. To investigate higher temperature EBCs, the cyclic steam oxidation of EBCs comprised of a single layer of ytterbium disilicate (YbDS) was compared to multilayered Si/YbDS EBCs, both deposited on SiC substrates using atmospheric plasma spray. After 500 1-h cycles at 1300°C in 90 vol%H₂O-10 vol%air with a gas velocity of 1.5 cm/s, both multilayer Si/YbDS and single layer YbDS grew thinner silica scales than bare SiC, with the single layer YbDS forming the thinnest scale. Both coatings remained fully adherent and showed no signs of delamination. Silica scales formed on the single layer coating were significantly more homogeneous and possessed a markedly lower degree of cracking compared to the multilayered EBC. The single layer EBC also was exposed at 1425°C in steam with a gas velocity of 14 cm/s in an alumina reaction tube. The EBC reduced specimen mass loss compared to bare SiC but formed an extensive 2nd phase aluminosilicate reaction product. A similar reaction product was observed to form on some regions of the bare SiC specimen and appeared to partially inhibit silica volatilization. The 1425°C steam exposures were repeated with a SiC reaction tube and no 2nd phase reaction product was observed to form on the single layer EBC or bare SiC.     

Plasma spray deposition of tri-layer environmental barrier coatings

An air plasma spray process has been used to deposit tri-layer environmental barrier coatings consisting of a silicon bond coat, a mullite inter-diffusion barrier, and a Yb₂SiO₅ top coat on SiC substrates. Solidified droplets in as-deposited Yb₂SiO₅ and mullite layers were discovered to be depleted in silicon. This led to the formation of an Yb₂SiO₅ + Yb₂O₃ two-phase top coat and 2:1 mullite (2Al₂O₃*SiO₂) coat deposited from 3:2 mullite powder. The compositions were consistent with preferential silicon evaporation during transient plasma heating; a consequence of the high vapor pressure of silicon species at plasma temperatures. Annealing at 1300 °C resulted in internal bond coat oxidation of pore and splat surfaces, precipitation of Yb₂O₃ in the top coat, and transformation of 2:1 mullite to 3:2 mullite + Al₂O₃. Mud-cracks were found in the Yb₂SiO₅ layer and in precipitated Al₂O₃ due to the thermal expansion mismatch between these coating phases and the substrate.     

Autonomous crack healing ability of SiC dispersed Yb2Si2O7 by oxidations in air and water vapor

Yb₂Si₂O₇ is a popular environmental barrier coating; however, it decomposes into Yb₂SiO₅ in high-temperature steam environments. The thermal mismatch between Yb₂Si₂O₇ and Yb₂SiO₅ leads to the cracking and failure of the disilicate coating via oxidation. Dispersing SiC nanofillers into the Yb₂Si₂O₇ matrix is suggested to maintain the Yb₂Si₂O₇ matrix and promote crack self-healing. This study is aimed at clarifying the effect of water vapor on the self-healing ability of such composites. X-ray diffraction analysis and scanning electron microscopy were used to monitor the surface composition and the crack formation, respectively, in 10 vol% SiC-dispersed Yb₂Si₂O₇ composites. Annealing at temperatures higher than 750 °C in air or in a water vapor rich atmosphere led to strength recovery and the self-healing of indentation-induced surface cracks owing to volume expansion during the oxidation of SiC. The self-healing effect was influenced by the oxidation time and temperature. Rapid diffusion of H₂O as an oxidizer into the SiO₂ layer promoted self-healing in a water vapor rich atmosphere. However, accelerated oxidation at temperatures higher than 1150 °C formed bubbles on the surface. Fabricating composites with a small amount of Yb₂SiO₅ will be a solution to these problems.     

Environmental barrier coatings using low pressure plasma spray process

Yb₂Si₂O₇/Si bilayer environmental barrier coatings (EBCs) on SiC ceramic substrate were produced by low pressure plasma spray (LPPS) process. Phase composition, microstructure, and thermal durability of LPPS Yb₂Si₂O₇/Si coating were investigated. XRD analysis indicated that the coating is mainly composed of Yb₂Si₂O₇ with ~15.5v% Yb₂SiO₅ phases. The LPPS EBCs have a dense microstructure with porosity less than 4%. Adhesion strength measurement indicated the LPPS EBCs have an average adhesion strength of 29.1 ± 0.8 MPa. Furnace cycle test (FCT) on the coatings in air at 1316°C was performed and the test ran for 900 cycles and there was no coating spallation/failure for LPPS Yb₂Si₂O₇/Si EBCs. The FCT results demonstrated the excellent thermal cycle durability of LPPS EBCs. Oxidation kinetics investigation of LPPS EBCs in flowing 90% H₂O (g)+10% air at 1316°C showed that the thermally grown oxide (TGO) growth rate is close to the oxidation rate of pure Si in dry air and is significantly lower than that in water vapor environment. The LPPS process is promising in making highly durable Yb2Si2O7-based dense EBCs by impeding diffusion and ingression of water vapor/O₂.     

Yb2Si2O7 Environmental barrier coatings with reduced bond coat oxidation rates via chemical modifications for long life

Spallation of environmental barrier coating (EBC) induced by thermally grown oxide (TGO) resulting from steam oxidation is a key EBC failure mode. A logical approach to improve EBC life, therefore, is to reduce TGO growth rates. A study was undertaken to investigate whether TGO growth rates can be reduced by adding modifier oxides. It was based on a hypothesis that modifier oxides dissolve in SiO₂ TGO and modify the SiO₂ structure, making the TGO less permeable to oxidants. Using a current state-of-the-art EBC (Si/Yb₂Si₂O₇) as the baseline, the Yb₂Si₂O₇ layer was modified by adding Al₂O₃ or Al₂O₃-containing oxide compounds, such as mullite and YAG (Y₃Al₅O₁₂), and TiO₂. EBCs were processed using air plasma spraying. Steam oxidation tests and post-oxidation test oxidation kinetics, chemistry, microstructure, and phase analysis were used to test the hypothesis. The best modified EBC reduced the TGO thickness by ~87% compared with that of the baseline EBC in 90% H₂O + 10% O₂ at 1316°C under thermal cycling. Correlations between oxidation kinetics, chemistry, and microstructure of EBC and TGO were used to explain the effect of modifier oxides on reducing TGO growth rates.     

Effect of temperature gradient on the erosion behavior of SiC coating for carbon/carbon composites in a combustion environment

SiC coating with a thickness of 50–70 µm was prepared on the surface of C/C composites by in-situ reaction method. The SiC coated C/C composites were then tested in a wind tunnel where a temperature gradient from 200 to 1600 °C could be obtained to investigate their erosion behavior. The results of wind tunnel test indicated that the service life of C/C composites was prolonged from 0.5 to 44 h after applying the SiC coating. After the wind tunnel test, three typical oxidation morphologies, including glassy SiO₂ layer, porous SiO₂ layer and clusters of honeycomb-like SiO₂ grains, were found on the SiC coated C/C composites. With the decrease of oxidation temperature, the amount of glassy SiO₂ declined and the thermal stress increased, which induced the cracking followed by the degradation of the SiC coating.     

Resistance of pure and mixed rare earth silicates against calcium-magnesium-aluminosilicate (CMAS): A comparative study

Rare earth silicate environmental barrier coatings (EBCs) are state of the art for protecting SiC ceramic matrix composites (CMCs) against corrosive media. The interaction of four pure rare earth silicate EBC materials Yb₂SiO₅, Yb₂Si₂O₇, Y₂SiO₅, Y₂Si₂O₇ and three ytterbium silicate mixtures with molten calcium-magnesium-aluminosilicate (CMAS) were studied at high temperature (1400°C). The samples were characterized by SEM and XRD in order to evaluate the recession of the different materials after a reaction time of 8 hours. Additionally, the coefficient of thermal expansion (CTE) was determined to evaluate the suitability of Yb silicate mixtures as EBC materials for SiC CMCs. Results show that monosilicates exhibit a lower recession in contact with CMAS than their disilicate counterparts. The recession of the ytterbium silicates is far lower than the recession of the yttrium silicates under CMAS attack. Investigation of the ytterbium silicate mixtures exposes their superior resistance to CMAS, which is even higher than the resistance of the pure monosilicate. Also their decreased CTE suggests they will display better performance than the pure monosilicate.     

High temperature abradable sealing coating for SiCf/SiC ceramic matrix composites

A study of porous YSZ abradable sealing coating (ASC) plasma-sprayed onto SiC_f/SiC ceramic matrix composites (CMC) through the compatibility of intermediate layers is reported. The multilayer Si/Yb₂Si₂O₇/LaMgAl₁₁O₁₉ thermal-environmental barrier coating (T-EBC) is served as intermediate layers in consideration of its ability to protect the CMC from recession and ease the misfit of the thermal expansivity. Isothermal exposure and thermal shock tests were conducted at 1200°C and led to the decomposition of t'-ZrO₂ phase to t-ZrO₂ and c-ZrO₂ phases in YSZ topcoat, the formation of mud-cracks throughout the entire coating structure and thermally grown oxide (SiO₂), with following an Yb₂Si₂O₇ reaction layer. The measured bond strength of the coated samples was 5.47 ± 0.85 MPa, and the fracture position mainly happened inside the CMC substrate. The Superficial Rockwell Hardness (HR15Y) considered to be an important factor in abradability increased by only 1.34% after 1200°C isothermal exposure for 100 h, showing excellent high temperature hardness stability. The abradability of the ASC was investigated by a sliding wear test, the fatigue wear mainly occurred in worn scar when encountering Si₃N₄ ceramic ball with high hardness and low thermal conductivity, while adhesive wear occurred when GCr15 steel ball with low hardness and high thermal conductivity are encountered.