共查询到20条相似文献,搜索用时 109 毫秒
1.
为了确保断路延时器校验台的检测数据准确可靠,结合其工作原理,依据校准方法,对时间参数测量结果进行科学、合理的不确定度评定分析民,验证其测量结果能够满足量值溯源要求,对计量检定机构开展该类仪器的校准工作有一定的指导意义。 相似文献
2.
直流稳压电源为测试设备和测试仪器提供工作直流电压和电流。通过研究直流稳压电源校准技术实现直流稳压电源的直流电压示值误差、直流电流示值误差、电源电压调整率、负载调整率及纹波电压等参数的校准;通过对各参数测量结果不确定度分析和评定,实现直流稳压电源参数量值溯源,保障其量值准确可靠。 相似文献
3.
4.
本文介绍变频电源的工作原理和特点,根据变频电源的各参数特点,应用现有的仪器设备对其校准项目和校准方法进行研究探讨,并对变频电源的电压和电流的测量不确定度进行评定。 相似文献
5.
6.
7.
8.
针对在片S参数校准,设计制作GaAs衬底SOLT校准组件,通过计算方法对校准组件中直通、开路、短路和负载校准件中偏置传输线的时延和损耗进行定义,运用基于NIST multiline TRL校准的测量方法对校准组件中开路校准件电容和短路校准件电感参数进行提取,结合直流电阻测试法测试负载阻值大小,实现对SOLT校准组件的完整表征。最后用自行研制并表征的SOLT校准组件校准在片S参数测试系统,通过测量无源器件验证校准效果,将测量结果与NIST multiline TRL校准后的测量结果比较,在20 GHz内传输幅度最大偏差0.1 dB,传输相位最大偏差3.5°。 相似文献
9.
10.
11.
12.
13.
Yongkang Chen Mike Bacich Cory Nardin Albert Sitorus Mark M. Weislogel 《Microgravity science and technology》2005,17(4):14-24
The behavior of wall-bound drops and bubbles is fundamental to many natural and industrial processes. Key characteristics
of such capillary systems include interface shape and stability for a variety of gravity levels and orientations. Significant
solutions are in hand for axisymmetric pendent drops for a variety of uniform boundary conditions along the contact line with
gravity acting normal to a planar wall. The special case of a wall-bound drop or bubble that is also pinned at an edge (i.e.
a ‘wall-edge-bound’ drop) is considered here where numerical solutions are obtained for interface shape and stability as functions
of drop volume, contact angle, fluid properties, and uniform gravity vector. For a semi-infinite zero-thickness planar wall
(plate), a critical contact angle is identified below which wall-edge-bound drops are always stable. The critical contact
angle is computed as a function of the gravity vector. The numerical procedure, which makes no account for contact angle hysteresis,
predicts that such wall-edge-bound drops are unconditionally unstable for any gravity field with a component that is tangent
to the wall while inwardly normal to the edge. Select experiments are conducted that support the conclusions drawn from the
numerical results. 相似文献
14.
15.
《Measurement Techniques》1975,18(12):1719-1725
16.
17.
热交换器是将不同温度介质之间的热量通过热传导的形式,由高温介质传递给低温介质,使介质达到生产所需温度的工艺设备,也可作为一种节能设备使用.通过对不同热交换器的结构分析,总结不同热交换器的优缺点、适用环境,为生产工艺设计人员及设备制造单位在选择可降低能耗、提高效率的设备上提供参考. 相似文献
18.
计量仪器收发工作是沟通计量检定部门以及送检单位之间的桥梁,也是计量检定工作的前提。随着各级计量技术机构业务量的不断增加,计量技术机构除了要树立顾客至上的服务理念之外,同时还要用专业、高效的管理模式来赢得顾客的信赖与认可。在计算机信息技术的不断发展与更新的大环境下,传统的管理模式已经不能适应计量检测工作的需求,因此,要有效的利用网络信息技术来促进计量仪器收发业务管理模式的创新,进而提高计量仪器收发业务管理的工作效率。 相似文献
19.