Temperature dependency of 0.1 μm partially depleted SOI CMOSFET

This work investigates the floating body effect (FBE) on the partially depleted SOI devices at various temperatures for high-performance 0.1 μm MOSFET. The thermal effect on the device's characteristics was investigated with respect to the body contacted MOSFET (BC-SOI) and floating body MOSFET without body contacted (FB-SOI). It is found that the threshold voltage (Vth) and the off state drain current (I_OFF) of the BC-SOI devices are more temperature sensitive than those of the FB-SOI devices. For operation at higher temperatures, there is no apparent difference in driving capability between the BC-SOI and FB-SOI MOSFETs     

21-ps 0.1-μm CMOS devices operating at room temperature

High-speed complementary metal-oxide semiconductor (CMOS)-inverter ring oscillators with the shortest gate length of 0.17 μm were fabricated by a conventional large-scale integrated (LSI) technology. The propagation delays were 21 ps / stage (2.0 V) at room temperature and 17 ps / stage (2.0 V) at 80 K. These results are the fastest records reported for bulk CMOS devices as of today. The results were obtained by reducing effective drain junction capacitances with “double-finger gates,” and devices will probably be faster if the areas are completely proportionally reduced to the feature size. Though it is important for CMOS devices to increase drain currents, a silicidation technique for source and drain was not necessary for the tested devices to reduce series resistance     

Suspended SOI structure for advanced 0.1-μm CMOS RF devices

Modern silicon-on-insulator (SOI) technology and 0.1-μm-channel-length complementary metal oxide silicon (CMOS) devices make it possible to fabricate high-performance RF devices by using standard Si ULSI processes. Using the buried oxide layer of an SOI wafer as an etching stopper, we were able to integrate a suspended inductor, with high-inductor resonance-frequency of 19.6 GHz, and high-performance 0.1-μm CMOS devices. Moreover, we experimentally show that this suspended CMOS has acceptable short-channel immunity. Using two-dimensional (2-D) simulation, we clarify that the gate-potential spread sufficiently suppresses the potential shifts, which results in good short-channel characteristics     

Threshold voltage sensitivity of 0.1 μm channel lengthfully-depleted SOI NMOSFET's with back-gate bias

We found threshold voltage sensitivity to silicon thickness variation in 0.1 μm channel length fully-depleted SOI NMOSFET's can be reduced with lightly-doped channel and back-gate bias. However, after the back-interface is accumulated, the reduction is small and threshold voltage roll-off due to high drain bias increases     

Temperature dependence of hot-carrier-induced degradation in 0.1μm SOI nMOSFETs with thin oxide

This letter investigates hot-carrier-induced degradation on 0.1 μm partially depleted silicon-on-insulator (SOI) nMOSFETs at various ambient temperatures. The thermal impact on device degradation was investigated with respect to body-contact nMOSFETs (BC-SOI) and floating-body SOI nMOSFETs (FB-SOI). Experimental results show that hot-carrier-induced degradation on drive capacity of FB-SOI devices exhibits inverse temperature dependence compared to that of BC-SOI devices. This is attributed to the floating-body effect (FBE) and parasitic bipolar transistor (PBT) effect     

Counter doping into uniformly and heavily doped channel region ofsub-0.1 μm SOI MOSFETs

We proposed counter doping into a heavily and uniformly doped channel region of SOI MOSFETs. This enabled us to suppress the short channel effects with proper threshold voltage V_th and to eliminate parasitic edge or back gate transistors. We derived a model for V_th as a function of the projected range, Rp and dose, Φ_D, of the counter doping, and showed that V_th is invariable even when the as-implanted counter doping profile redistributes. Using this technology, we demonstrated a V_th roll-off free 0.075 μm-L_Geff nMOSFET with low off-state current     

0.1μmSOI槽栅CMOS特性仿真

基于SOI技术对器件特性的良好改善和槽栅MOS器件在深亚微米领域抑制短沟道效应和抗热载流子效应方面的显著优势,对SOI槽栅CMOS器件在0.1 μm尺寸下的电学特性进行了模拟仿真,仿真结果表明,基于SOI衬底的槽栅CMOS器件除了拥有槽栅器件独特优势之外,还很好地抑制了栅极漏电和阈值偏高等体硅槽栅MOS所具有的特性缺陷,得到了更加理想的实验结果.     

A study on channel design for 0.1 μm buried p-channel MOSFETs

This paper investigates the channel design for buried p-channel MOSFETs with an effective channel length of 0.1 μm via simulations using the two-dimensional device simulator PISCES IIB. A new three-layer design is considered with the objective of obtaining low junction capacitance while maintaining high current drive and suppressing punchthrough. The channel design consists of a p-type layer under the gate oxide, an n-type anti-punchthrough layer below the p-type layer followed the substrate with a doping concentration of 1e17/cm³. By optimizing the doping structure, an attempt is made to investigate fundamental limits of the buried channel design. In concurrence with published results, it is shown that there is a maximum allowable thickness for the first layer, while the thickness of the anti-punchthrough layer has a minimum value in order to effectively suppress punchthrough. The above constraints enable devices with good subthreshold characteristics (subthreshold swing <90 mV/Dec) as well as high transconductance which is a matter of concern for ultra-thin buried layers. While simulation results show that it is possible to fabricate buried p-channel MOSFETs with n-type polysilicon gate electrodes in the 0.1 μm regime, it is also evident that advanced doping and low temperature fabrication technologies are needed that provide control over doped layers of ultra-thin dimensions     

Simulation and two-dimensional analytical modeling of subthresholdslope in ultrathin-film SOI MOSFETs down to 0.1 μm gate length

The subthreshold slope in ultra-thin-film fully depleted SOI MOSFETs is investigated for channel lengths from the long channel region down to 0.1 μm. A doping effect is found which allows improvement of the S-factor by increasing the channel doping concentration. In order to explain this phenomenon and to clarify the mechanism of S -factor degradation at short gate lengths, a two-dimensional analytical model is developed. A modified boundary condition for the two-dimensional Poisson equation is introduced to account for the nonlinear potential distribution inside the buried oxide. It is found that the S-factor short-channel degradation is governed by three mechanisms: the rise of capacitances at the channel source and drain ends due to the two-dimensional potentional distribution; the subthreshold current flow at the back channel surface; and the modulation of the effective current channel thickness during the gate voltage swing in the subthreshold region. The analytical model results are compared to those of numerical device simulation, and a good agreement is found     

Experimental high performance sub-0.1 μm channel nMOSFET's

Very high performance sub-0.1 μm channel nMOSFET's are fabricated with 35 Å gate oxide and shallow source-drain extensions. An 8.8-ps/stage delay at V_dd=1.5 V is recorded from a 0.08 μm channel nMOS ring oscillator at 85 K. The room temperature delay is 11.3 ps/stage. These are the fastest switching speeds reported to date for any silicon devices at these temperatures. Cutoff frequencies (f_T) of a 0.08 μm channel device are 93 GHz at 300 K, and 119 GHz at 85 K, respectively. Record saturation transconductances, 740 mS/mm at 300 K and 1040 mS/mm at 85 K, are obtained from a 0.05 μm channel device. Good subthreshold characteristics are achieved for 0.09 μm channel devices with a source-drain halo process     

Efficient 3.3 μm light emitting diodes for detecting methane gasat room temperature

In_0.97Ga_0.3As light emitting diodes were grown on p-type InAs substrates by liquid phase epitaxy (LPE). These devises exhibit efficient infrared emission at 3.3 μm and can be used to fabricate infrared methane gas sensors for the cost-effective detection and monitoring of methane gas in various applications     

A methodology for deep sub-0.25 μm CMOS technology prediction

We present a novel methodology for characterization of sub-quartermicron CMOS technologies. It involves process calibration, device calibration employing two-dimensional device simulation and automated Technology Computer Aided Design (TCAD) optimization and, finally, transient mixed-mode device/circuit simulation. The proposed methodology was tested on 0.25 μm technology and applied to 0.13 μm technology in order to estimate ring oscillator speed. The simulation results show an excellent agreement with available experimental data     

A novel 0.1 μm MOSFET structure with inverted sidewall andrecessed channel

To solve the problems of trade-off between the short channel effect and the performance enhancement of sub-quartermicrometer MOSFETs, we have developed a recessed channel MOSFET structure called ISRC (Inverted-Sidewall Recessed-Channel). The oxide thickness is 4 nm and the effective channel length is 0.1 μm, which is the smallest Si-MOSFET ever reported in the recessed channel structures. The maximum saturation transconductance at V_D=2 V is 446 mS/mm for the 0.1 μm n-channel device. The threshold voltage roll-off is kept within 64 mV when the gate length varies from 1.4 μm to 0.1 μm and good subthreshold characteristics are achieved for 0.1 μm channel device     

Comparative analysis of hot electron injection and induced devicedegradation in scaled 0.1 μm SOI n-MOSFETs using Monte Carlosimulation

A self-consistent Monte Carlo (MC) simulator is employed to investigate and compare hot electron phenomena in three competing design strategies for 0.1 μm SOI n-MOSFETs operating under low voltage conditions, i.e., V_d considerably less than the Si-SiO₂ injection barrier height φ_b. Simulations of these designs reveal that non-local carrier transport effects and two-dimensional current how play a significant role in determining the relative rate and location of hot electron injection into both the front and back oxides. Specifically, simulations indicate that electron-electron interactions near the drain edge are a main source of electron energies exceeding φ_b. The hot electron injection distributions are then coupled with an empirical model to generate interface state distributions at both the front and back oxide interfaces. These interface states are incorporated into a drift-diffusion simulator to examine relative hot-electron-induced device degradation for the three 0.1 μm SOI designs. Simulations suggest that both the Si layer thickness and doping distribution affect device sensitivity to hot-electron-induced interface states. In particular, the simulations show that a decrease in the channel doping results in increased sensitivity to back oxide charge. In the comparison of the heavily-doped designs, the design with a thinner T_Si experiences significantly more hot-electron-induced oxide damage in the back oxide and more degradation from the charged states at the back interface     

350 MHz opamp-RC filter in 0.18 μm CMOS

A 350 MHz fifth-order elliptic opamp-RC filter demonstrates that opamp-based filters need not have bandwidth disadvantages compared to transconductor-based filters. The filter, fabricated in standard digital 0.18 μm CMOS with 1.8 V V_DD, achieves 0.5 Vp-p signal swing at -40 dB THD     

Technology challenges for integration near and below 0.1 μm

Technology challenges for silicon integrated circuits with a design rule of 0.1 μm and below are addressed. We begin by reviewing the state-of-the-art CMOS technology at 0.25 μm currently in development, covering a logic-oriented processes and dynamic random access memory (DRAM) processes. CMOS transistor structures are compared by introducing a figure of merit. We then examine scaling guidelines for 0.1 μm which has started to deviate for optimized performance from the classical theory of constant-field scaling. This highlights the problem of nontrivial subthreshold current associated with the scaled-down CMOS with low threshold voltages. Interconnect issues are then considered to assess the performance of microprocessors in 0.1 μm technology. 0.1 μm technology will enable a microprocessor which runs at 1000 MHz with 500 million transistors. Challenges below 0.1 μm are then addressed. New transistor and circuit possibilities such as silicon on insulator (SOI), dynamic-threshold (DT) MOSFET, and back-gate input MOS (BMOS) are discussed. Two problems below 0.1 μm are highlighted. They are threshold voltage control and pattern printing. It is pointed out that the threshold voltage variations due to doping fluctuations is a limiting factor for scaling CMOS transistors for high performance. The problem with lithography below 0.1 μm is the low throughput for a single probe. The use of massively parallel scanning probe assemblies working over the entire wafer is suggested to overcome the problem of low throughput     

High performance 0.1 μm gate-length p-type SiGe MODFET's andMOS-MODFET's

High performance p-type modulation-doped field-effect transistors (MODFET's) and metal-oxide-semiconductor MODFET (MOS-MODFET) with 0.1 μm gate-length have been fabricated on a high hole mobility SiGe-Si heterojunction grown by ultrahigh vacuum chemical vapor deposition. The MODFET devices exhibited an extrinsic transconductance (g_m) of 142 mS/mm, a unity current gain cut-off frequency (f_T) of 45 GHz and a maximum oscillation frequency (f_MAX) of 81 GHz, 5 nm-thick high quality jet-vapor-deposited (JVD) SiO₂ was utilized as gate dielectric for the MOS-MODFET's. The devices exhibited a lower gate leakage current (1 nA/μm at V_gs=6 V) and a wider gate operating voltage swing in comparison to the MODFET's. However, due to the larger gate-to-channel distance and the existence of a parasitic surface channel, MOS-MODFET's demonstrated a smaller peak g _m of 90 mS/mm, f_T of 38 GHz, and f_max of 64 GHz. The threshold voltage shifted from 0.45 V for MODFET's to 1.33 V for MOS-MODFET's. A minimum noise figure (NF_min) of 1.29 dB and an associated power gain (G_a) of 12.8 dB were measured at 2 GHz for MODFET's, while the MOS-MODFET's exhibited a NF _min of 0.92 dB and a G_a of 12 dB at 2 GHz. These DC, RF, and high frequency noise characteristics make SiGe/Si MODFET's and MOS-MODFET's excellent candidates for wireless communications     

0.1 μm Schottky-collector AlAs/GaAs resonant tunneling diodes

The Schottky-collector resonant tunneling diode (RTD) is an RTD with the normal N+ collector and ohmic contact replaced by a Schottky contact, thereby eliminating the associated parasitic resistance. With submicron Schottky contact dimensions, the remaining components of the parasitic series resistance can be greatly reduced, resulting in an increased maximum frequency of oscillation, f_max. AlAs/GaAs Schottky-collector RTDs were fabricated using 0.1 μm T-gate technology developed for high electron mobility transistors. From their measured dc and microwave parameters, and including the effect of the quantum well lifetime, f_max=900 GHz is computed     

Optimization of series resistance in sub-0.2 μm SOI MOSFET's

The optimization of device series resistance in ultra-thin film SOI devices is studied through 2-D simulations and process experiments. The series resistance is dependent on the contact resistivity of the silicide to silicon and the silicide geometry. To achieve low series resistance, very thin silicides that do not fully consume the SOI film are needed. A novel cobalt salicidation technology using titanium/cobalt laminates is used to demonstrate sub-0.2 μm, thin-film SOI devices with excellent performance and very low device series resistance     

Optimization of series resistance in sub-0.2 μm SOI MOSFET's

The optimization of device series resistance in ultrathin film SOI devices is studied through 3-D simulations and process experiments. The series resistance is dependent on the contact resistivity of the silicide to silicon and the silicide geometry. To achieve low series resistance, very thin silicides that do not fully consume the SOI film are needed. A novel cobalt salicidation technology using titanium/cobalt laminates is used to demonstrate sub-0.2 μm, thin-film SOI devices with excellent performance and very low device series resistance