Silver nanoparticles deposited on porous silicon as a surface-enhanced Raman scattering (SERS) active substrate

Silver nanoparticles were deposited spontaneously from their aqueous solution on a porous silicon (PS) layer. The PS acts both as a reducing agent and as the substrate on which the nanoparticles nucleate. At higher silver ion concentrations, layers of nanoparticle aggregates were formed on the PS surface. The morphology of the metallic layers and their SERS activity were influenced by the concentrations of the silver ion solutions used for deposition. Raman measurements of rhodamine 6G (R6G) and crystal violet (CV) adsorbed on these surfaces showed remarkable enhancement of up to about 10 orders of magnitude.     

Nanoparticle processing for optical applications – A review

This article provides an overview of current research on nanoparticle processing for optical applications. We elaborate on four nanoparticle processing methods: (i) an aerosol spray method, (ii) nanoparticle dispersion, (iii) a nanoparticle coating method for making films, and (iv) an electrospinning method for making fibers from a nanoparticle dispersion. The use of aerosol spray methods for the preparation of nanoparticles and nanostructured particles for application in optical materials is reviewed. Nanoparticle dispersion techniques for the synthesis of unique composite organic/inorganic materials with unique optical properties are discussed. Preparation of self-assembled monolayer particle films, layer-by-layer films, and fibers consisting of nanoparticles was also introduced. We also highlight the range of unique optical properties associated with optical materials that result from nanoparticle processing, such as a controllable refractive index, transparency, photoluminescence, photonic crystal, and plasmon resonance.     

Room-temperature synthesis of high-density CuS nanowire arrays by a simple paired cell

High-density CuS nanoparticle nanowire (NPNW) arrays were successfully synthesized at room temperature by a simple paired cell method. The as-prepared nanowire arrays were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS) and transmission electron microscopy (TEM). The results indicate that the nanowire diameter is dependent on the pore size of the used ordered porous anodic alumina (OPAA) template and larger than the corresponding pore diameter of the template due to the corrosion effect of Na2S solution on the template. The nanowire is composed of CuS nanoparticles with hexagonal structure. When the reaction time is long enough, the nanowire is solid and composed of nearly spherical CuS nanoparticles. When the reaction time is short, only middle part of the nanowire is solid and composed of nearly spherical CuS nanoparticles, however, the tops are hollow and mainly composed of flake-like nanoparticles. The formation mechanism of CuS nanoparticle nanowires was proposed to be a heterogeneous nucleation, coalescence, aggregation and filling process.     

Highly sensitive, colorimetric detection of mercury(II) in aqueous media by quaternary ammonium group-capped gold nanoparticles at room temperature

We provide a highly sensitive and selective assay to detect Hg(2+) in aqueous solutions using gold nanoparticles modified with quaternary ammonium group-terminated thiols at room temperature. The mechanism is the abstraction of thiols by Hg(2+) that led to the aggregation of nanoparticles. With the assistance of solar light irradiation, the detection limit can be as low as 30 nM, which satisfies the guideline concentration of Hg(2+) in drinking water set by the WHO. In addition, the dynamic range of detection is wide (3 × 10(-8)-1 × 10(-2) M). This range, to our best knowledge, is the widest one that has been reported so far in gold nanoparticle (AuNP)-based assays for Hg(2+).     

Magnetic colloidosomes derived from nanoparticle interfacial self-assembly

Based on the interfacial self-assembly of magnetite nanoparticles, we demonstrate the formation of colloidosomes with shells predominantly composed of monolayers of liquid-like, close-packed nanoparticles. The gelation of aqueous phase with agarose leads to robust and water-dispersible nanoparticle colloidosomes, allowing encapsulation of various water soluble materials. The cutoff of the nanoparticle colloidosomes obtained is primarily defined by the nanoparticle size. This controllable permeability should be of great importance for the encapsulation application.     

不同形貌纳米ZnO的合成及其光催化性能研究

以Zn(NO3)2·6H2O和NH4HCO3为原料,采用直接沉淀法制备了不同形貌和微观结构的纳米氧化锌。详细研究了反应终点pH值及沉淀前驱物的后处理方式等对粉体的晶体结构、形貌、粒径分布和团聚状况的影响。通过调节反应条件可分别获得网络状或颗粒状纳米氧化锌;光催化降解实验结果表明,网络状纳米氧化锌的光催化性能优于纳米颗粒状产物,而且该网络状和颗粒状纳米氧化锌的光催化活性均明显优于商品光催化剂P25。     

Silica coated hard-magnetic strontium hexaferrite nanoparticles

Stable colloids of hard magnetic particles are newly developed and very promising materials. Surface functionalization of these particles remains challenging because the particles tend to aggregate during reaction due to strong magnetic interactions. Herein we report on a synthesis of strontium hexaferrite hard magnetic nanoparticles coated with silica by hydrolysis of tetraethoxysilane. As a source of hexaferrite we used stable colloid of plate-like nanoparticles with mean diameter of 40 nm and thickness of 5 nm, which were prepared by a glass-ceramic process. We have shown that to successfully coat each hexaferrite particle individually the hydrolysis conditions should provide heterogeneous nucleation of silica with rate higher than the aggregation rate of the colloidal nanoparticles. The resulting materials represent single crystal hexaferrite cores wrapped in silica shell with mean thickness of 18 and 23 nm depending on synthesis conditions. The obtained core-shell particles can be easily dispersed as stable aqueous colloids. The materials can be used as magnetic sorbents or nanocontainers and, furthermore, they are very promising colloidal building blocks for various magnetically assembled nanostructures.     

Synthesis and characterization of supported polysugar-stabilized palladium nanoparticle catalysts for enhanced hydrodechlorination of trichloroethylene

Palladium (Pd) nanoparticle catalysts were successfully synthesized within an aqueous phase using sodium carboxymethyl cellulose (CMC) as a capping ligand which offers a green alternative to conventional nanoparticle synthesis techniques. The CMC-stabilized Pd nanoparticles were subsequently dispersed within support materials using the incipient wetness impregnation technique for utilization in heterogeneous catalyst systems. The unsupported and supported (both calcined and uncalcined) Pd nanoparticle catalysts were characterized using transmission electron microscopy, energy dispersive x-ray spectrometry, x-ray diffraction, and Brunauer-Emmett-Teller surface area measurement and their catalytic activity toward the hydrodechlorination of trichloroethylene (TCE) in aqueous media was examined using homogeneous and heterogeneous catalyst systems, respectively. The unsupported Pd nanoparticles showed considerable activity toward the degradation of TCE, as demonstrated by the reaction kinetics. Although the supported Pd nanoparticle catalysts had a lower catalytic activity than the unsupported particles that were homogeneously dispersed in the aqueous solutions, the supported catalysts retained sufficient activity toward the degradation of TCE. In addition, the use of the hydrophilic Al(2)O(3) support material induced a mass transfer resistance to TCE that affected the initial hydrodechlorination rate. This paper demonstrates that supported Pd catalysts can be applied to the heterogeneous catalytic hydrodechlorination of TCE.     

Shedding Light on the Trehalose‐Enabled Mucopermeation of Nanoparticles with Label‐Free Raman Spectroscopy

Nanoparticle‐based drug delivery systems have attracted significant interest owing to their promise as tunable platforms that offer improved intracellular release of cargo therapeutics. However, significant challenges remain in maintaining the physiological stability of the mucosal matrix due to the nanoparticle‐induced reduction in the matrix diffusivity and promotion of mucin aggregation. Such aggregation also adversely impacts the permeability of the nanoparticles, and thus, diminishes the efficacy of nanoparticle‐based formulations. Here, an entirely complementary approach is proposed to the existing nanoparticle functionalization methods to address these challenges by using trehalose, a naturally occurring disaccharide that offers exceptional protein stabilization. Plasmon‐enhanced Raman spectroscopy and far‐red fluorescence emission of the plasmonic silver nanoparticulate clusters are harnessed to create a unique dual‐functional, aggregating, and imaging agent that obviates the need of an additional reporter to investigate mucus–nanoparticle interactions. These spectroscopy‐based density mapping tools uncover the mechanism of mucus–nanoparticle interactions and establish the protective role of trehalose microenvironment in minimizing the nanoparticle aggregation. Thus, in contrast to the prevailing belief, these results demonstrate that nonfunctionalized nanoparticles may rapidly penetrate through mucus barriers, and by leveraging the bioprotectant attributes of trehalose, an in vivo milieu for efficient mucosal drug delivery can be generated.     

Facile synthesis and characterization of hydroxylapatite nanoparticle chains

The hydroxylapatite nanoparticle chains were firstly synthesized by self-assembly with sodium polymethacrylic acid as the template. These high-quality HAP nanoparticle chains showed well-defined nanoscaled structures and regular morphology. The nanoparticle chains were 1.4-2 μm in length and the nanoparticles were about 45 nm in diameter. The structure of products has been studied with XRD and FT-IR spectrum. The forming conditions and mechanism of the products have been investigated. This synthesis method is facile and effective. The products will have potential applications in many fields such as biosensor, and biomimetic bone materials etc. The experimental outcomes present here will have potential values in crystal engineering research and practical applications.     

Low cytotoxicity porous Nd(2)(SiO(4))(3) nanoparticles with near infrared excitation and emission

Porous Nd(2)(SiO(4))(3) nanoparticles were successfully synthesized by a controlled route. This kind of silicate nanoparticle could be excited by near-infrared (NIR) radiation (808 nm) and triggered a NIR emission (1066 nm) at room temperature. By monitoring the 1066 nm emission, the long-lived luminescent lifetime was determined to be 19.5 μs. These NIR nanoparticles with appropriate diameters (<100 nm) were suitable for cell assays. MTT assays showed that the cytotoxicity of the porous Nd(2)(SiO(4))(3) nanoparticles was very low. Therefore, these porous silicate nanoparticles are potential biosafe high-performance NIR biolabeling materials.     

以PAMAM树形分子为模板剂纳米氧化锌的制备及其光催化性能研究

以3.5代端酯基PAMAM树型分子为模板,成功制备了颗粒均匀的纳米氧化锌.采用TEM、XRD及UV-vis等手段对合成样品的形貌和结构进行表征.初步探讨了纳米ZnO形成的可能模板机理.测试其在紫外光作用下光降解罗丹明B的性能,结果表明,该法制备的纳米ZnO具有很高的光催化活性.     

Quantitative surface acoustic wave detection based on colloidal gold nanoparticles and their bioconjugates

The immobilization scheme of monodispersed gold nanoparticles (10-nm diameter) on piezoelectric substrate surfaces using organosilane molecules as cross-linkers has been developed for lithium niobate (LiNbO3) and silicon oxide (SiO2)/gold-covered lithium tantalate (LiTaO3) of Rayleigh and guided shear horizontal- (guided SH) surface acoustic wave (SAW) sensors. In this study, comparative measurements of gold nanoparticle adsorption kinetics using high-resolution field-emission scanning electron microscopy and SAW sensors allow the frequency responses of SAW sensors to be quantitatively correlated with surface densities of adsorbed nanoparticles. Using this approach, gold nanoparticles are used as the "nanosized mass standards" to scale the mass loading in a wide dynamical range. Rayleigh-SAW and guided SH-SAW sensors are employed here to monitor the surface mass changes on the device surfaces in gas and liquid phases, respectively. The mass sensitivity ( approximately 20 Hz.cm2/ng) of Rayleigh-SAW device (fundamental oscillation frequency of 113.3 MHz in air) is more than 2 orders of magnitude higher than that of conventional 9-MHz quartz crystal microbalance sensors. Furthermore, in situ (aqueous solutions), real-time measurements of adsorption kinetics for both citrate-stabilized gold nanoparticles and DNA-gold nanoparticle conjugates are also demonstrated by guided SH-SAW (fundamental oscillation frequency of 121.3 MHz). By comparing frequency shifts between the adsorption cases of gold nanoparticles and DNA-gold nanoparticle conjugates, the average number of bound oligonucleotides per gold nanoparticle can also be determined. The high mass sensitivity ( approximately 6 Hz.cm2/ng) of guided SH-SAW sensors and successful detection of DNA-gold nanoparticle conjugates paves the way for real-time biosensing in liquids using nanoparticle-enhanced SAW devices.     

Synthesis,characterization and surface modification of ZnCrFeO4 nanoparticles

The aim of this research was to investigate zinc chromium ferrite (ZnCrFeO₄) nanoparticles, synthesized using the sol gel technique with nanoparticle size controlled through a two-stage annealing process. Stage one was a low temperature firing which produced low quality nanocrystals with an average size of 15 nm. This was followed by a second firing stage at high temperature which enhanced the crystal quality. The nanoparticles were then coated with a bio-compatible shell to form a stable suspension in the ferrofluid carrier. The resulting nanoparticles were found by electron microscopy, atomic force microscopy and X-ray diffraction studies to have excellent crystal quality. The average size was 8.5 nm. Preliminary cell culture studies indicated the ZnCrFeO₄ nanoparticles were non-toxic. The relatively high measured value of the relaxivity r₂ showed that the nanoparticle coating was effective in substantially reducing aggregation and enhancing the properties of the nanoparticles associated with contrast enhancement in MRI.     

高强韧金属材料中微结构的研究和应用

金属结构材料中的共格界面强化近年来受到广泛关注,虽然,该方法被证明是一种可同时实现强度、韧性双增的有效途径,但该类材料的制备往往受到尺寸、设备或工艺的制约.近期,一种全新的原位纳米颗粒强化技术被提出,旨在通过弥散分布的共格纳米粒子实现材料微观组织的优化及综合性能的提升.文中以铁基合金、铜合金、铝合金为例,对原位纳米颗粒...     

Synthesis of Catalytically Active Porous Platinum Nanoparticles by Transmetallation Reaction and Proposition of the Mechanism

A facile method for the synthesis of porous platinum nanoparticles by transmetallation reactions between sacrificial nickel nanoparticles and chloroplatinic acid (H₂PtCl₆) in solution, as well as at the constrained environment of the air–water interface, using a Langmuir–Blodgett instrumental setup is presented. To carry out the transmetallation at the air–water interface hydrophobized nickel nanoparticles are assembled as a monolayer on the sub phase containing platinum ions. The porous Pt nanoparticles obtained as a result of the reaction are found to act as extremely good catalysts for hydrogenation reaction. The products are well characterized by TEM, HRTEM, EDAX, and STEM. Attempts are made to postulate the plausible mechanism of this reaction to generate this kind of nanoparticle with controllable geometric shape and structure. This simple strategy has the potential to synthesize other nanomaterials of interest too.     

Tetrazoles: Unique Capping Ligands and Precursors for Nanostructured Materials

Capping agents play an important role in the colloidal synthesis of nanomaterials because they control the nucleation and growth of particles, as well as their chemical and colloidal stability. During recent years tetrazole derivatives have proven to be advanced capping ligands for the stabilization of semiconductor and metal nanoparticles. Tetrazole‐capped nanoparticles can be prepared by solution‐phase or solventless single precursor approaches using metal derivatives of tetrazoles. The solventless thermolysis of metal tetrazolates can produce both individual semiconductor nanocrystals and nanostructured metal monolithic foams displaying low densities and high surface areas. Alternatively, highly porous nanoparticle 3D assemblies are achieved through the controllable aggregation of tetrazole‐capped particles in solutions. This approach allows for the preparation of non‐ordered hybrid structures consisting of different building blocks, such as mixed semiconductor and metal nanoparticle‐based (aero)gels with tunable compositions. Another unique property of tetrazoles is their complete thermal decomposition, forming only gaseous products, which is employed in the fabrication of organic‐free semiconductor films from tetrazole‐capped nanoparticles. After deposition and subsequent thermal treatment these films exhibit significantly improved electrical transport. The synthetic availability and advances in the functionalization of tetrazoles necessitate further design and study of tetrazole‐capped nanoparticles for various applications.     

Sizing nanomatter in biological fluids by fluorescence single particle tracking

Accurate sizing of nanoparticles in biological media is important for drug delivery and biomedical imaging applications since size directly influences the nanoparticle processing and nanotoxicity in vivo. Using fluorescence single particle tracking we have succeeded for the first time in following the aggregation of drug delivery nanoparticles in real time in undiluted whole blood. We demonstrate that, by using a suitable surface functionalization, nanoparticle aggregation in the blood circulation is prevented to a large extent.     

Shaping Liquid Crystals with Gold Nanoparticles: Helical Assemblies with Tunable and Hierarchical Structures Via Thin-Film Cooperative Interactions

The availability of helical assemblies of plasmonic nanoparticles with precisely controlled and tunable structures can play a key role in the future development of chiral plasmonics and metamaterials. Here, a strategy to efficiently yield helical structures based on the cooperative interactions of liquid crystals and gold nanoparticles in thin films is developed. These nanocomposites exhibit exceptional long-range hierarchical order across length scales, which results from the growth mechanism of nanoparticle-coated twisted nanoribbons and their ability to form organized bundles. The helical assembly formation is governed by the presence of rationally functionalized nanoparticles. Importantly, the thickness of the achieved nanocomposites can be reversibly reconfigured owing to the polymorphic nature of the liquid crystal. The versatility of the proposed approach is demonstrated by preparing helices assembled from nanoparticles of different geometries and dimensions (spherical and rod-like). The described strategy may become an enabling technology for structuring nanoparticle assemblies with high precision and fabricating optically active materials.     

Particle formation and aggregation–collapse behavior of poly(N-isopropylacrylamide) and poly(ethylene glycol) block copolymers in the presence of cross-linking agent

The effect of feed molar ratio of N-isopropylacrylamide (NIPAM) to poly(ethylene oxide) (PEO) on the particle formation of poly(N-isopropylacrylamide) (PNIPAM) and PEO block copolymers (PNIPAM-b-PEO) and their aggregation-collapse behavior have been studied in aqueous solutions. It is found that in the presence of cross-linking agent N,N'-methylenebisacryla-mide (BIS), different morphologies of PNIPAM-b-PEO copolymers can be obtained, including a grafting-like structure, a hemispherical core-shell structure and a well-defined core-shell nanoparticle, as the feed molar amount of NIPAM in the copolymerization is increased. The increase in temperature causes the self-aggregation of grafting-like copolymers and hemispherical particles due to the hydrophobic interaction between locally unshielded PNIPAM blocks prior to the conformational transition of PNIPAM. When the feed molar ratio of NIPAM to PEO exceeds a certain value, a well-defined core-shell nanoparticle can be produced during the copolymerization. At low concentrations, PNIPAM cores of single core-shell nanoparticles can undergo the conformational transition without aggregation. The increase in the concentration of the well-defined core-shell nanoparticles, however, results in a week aggregation at temperatures lower than the theta-temperature of pure PNIPAM due to the association of methyl groups at the periphery of PEO shells.