The Activation Energy <Emphasis Type="Italic">U</Emphasis>(<Emphasis Type="Italic">T</Emphasis>,<Emphasis Type="Italic">H</Emphasis>) in Y-based Superconductors

Based on the Arrhenius equation, a method to calculate the activation energy from the resistance transition is proposed for high temperature superconductors. This method is applied to the Y-based superconductors. The activation energy is found to be U(T,H)∼(1−T/T _c )^4.8(H/H ₀)^−3.8 of YBCO crystal, and U(T,H)∼(1−T/T _c )^3.3(H/H ₀)^−2.2 of Er doped MTG YBCO crystal, respectively. With the obtained activation energy U(T,H), the lower part of the experimental curve ρ(T,H) and its derivative can be reproduced.      

The pH-induced thermosensitive poly (NIPAAm-<Emphasis Type="Italic">co</Emphasis>-AAc-<Emphasis Type="Italic">co</Emphasis>-HEMA)-<Emphasis Type="Italic">g</Emphasis>-PCL micelles used as a drug carrier

The macromonomer of 2-hydroxyethyl methyacrylate-caprolactone (HPCL) was synthesized by the ring-opening polymerization (ROP) of ε-caprolactone, which was initiated by 2-hydroxyethyl methyacrylate (HEMA). Then, the graft terpolymers of NIPAAm-co-AAc-co-HEMA-g-PCL (PHNA-CL) with varying mole ratios were subsequently synthesized by free radical polymerization of HEMA-PCL, N-isopropylacrylamide (NIPAAm) and acrylic acid (AAc). PHNA-CL was further self-assembled in different types of solvent. All the as-prepared copolymers were characterized by ¹H NMR, FT-IR and GPC. Micellization behaviors of micelles were studied by TEM and DLS. The micelles exhibited a phase transition temperature which can be readily adjusted by changing pH value of the micellization system. Micelle loaded with doxorubicin (DOX) was used to evaluate the drug release behavior. The release of DOX from micelles could be controlled by changing pH value and temperature in buffer solutions. The micelles are potentially to be used as a new anticancer drug carrier for intracellular delivery.     

Long-wavelength photodiodes based on <Emphasis Type="Italic">n</Emphasis>-GaSb/<Emphasis Type="Italic">n</Emphasis>-GaInAsSb/<Emphasis Type="Italic">p</Emphasis>-AlGaAsSb heterostructures

Photodiodes sensitive in the wavelength ranges 1–2.5 μm and 1–4.8 μm at room temperature have been created on the basis of n-GaSb/n-GaInAsSb/p-AlGaAsSb double-junction heterostructures of two types. The broadband photosensitivity of the diode structures of both types is indicative of the complete separation of photogenerated electron-hole pairs in the staggered n-p heterojunction (n-GaInAsSb/p-AlGaAsSb). The noise characteristics of photodetectors based on the proposed diode structures have been studied. Prospects of the use of these devices in thermophotovoltaic cells for low-temperature radiation sources are considered.     

Impact-ionization-stimulated electroluminescence in isotype <Emphasis Type="Italic">n</Emphasis>-GaSb/<Emphasis Type="Italic">n</Emphasis>-AlGaAsSb/<Emphasis Type="Italic">n</Emphasis>-GaInAsSb heterostructures

We have studied electroluminescence in n-GaSb/n-AlGaAsSb/n-GaInAsSb heterostructures with isotype heterojunctions, in which the quantum efficiency of emission is increased due to the additional production of electron-hole pairs as a result of the impact ionization that takes place near the heterointerface. The impact ionization in such heterostructures is possible due to the presence of deep wells in the energy band structure.     

Speed of sound in <Emphasis Type="Italic">n</Emphasis>-hexane, <Emphasis Type="Italic">n</Emphasis>-octane, <Emphasis Type="Italic">n</Emphasis>-decane,and <Emphasis Type="Italic">n</Emphasis>-hexadecane in the liquid state

This paper describes an improved experimental facility for measuring the speed of sound in liquids with an accuracy of up to 0.1%. Measurements of the speed of sound in liquid n-hexane, n-octane, n-decane, and n-hexadecane at temperatures of 298–433 K and pressures of 0.1–100 MPa have been made. It has been shown that in the possible comparison range the obtained values of the speed of sound are in good agreement with the literature data. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 81, No. 4, pp. 732–736, July–August, 2008.     

Synthesis,growth, optical,mechanical and electrical properties of <Emphasis Type="Italic">L</Emphasis>-lysine <Emphasis Type="Italic">L</Emphasis>-lysinium dichloride nitrate (<Emphasis Type="Italic">L</Emphasis>-LLDN) single crystal

Semi-organic nonlinear optical material, L-lysine L-lysinium dichloride nitrate (2C₆H₁₅N₂O₂⁺_{2}^{+} · H⁺ · NO₃^-_{3}^{-} · 2Cl⁻) was synthesized at room temperature. Single crystals of L-LLDN were grown by slow cooling solution growth technique. The grown crystal was confirmed by powder X-ray diffraction analysis. The crystalline perfection of the grown single crystal was characterized by high-resolution X-ray diffraction (HRXRD) studies. The cut-off wavelength was determined by UV-vis transmission spectral analysis. The frequency doubling of the grown crystal was confirmed by powder second harmonic generation (SHG) measurement. The refractive index and birefringence of the crystal were determined using He–Ne laser source. Mechanical property of the crystal was determined by Vickers hardness tester. The frequency and temperature dependence of dielectric constant (ε _r), dielectric loss (tan δ) and a.c. conductivity (σ _ac) were also measured.     

Electrospun poly(<Emphasis Type="SmallCaps">d</Emphasis>/<Emphasis Type="SmallCaps">l</Emphasis>-lactide-<Emphasis Type="Italic">co</Emphasis>-<Emphasis Type="SmallCaps">l</Emphasis>-lactide) hybrid matrix: a novel scaffold material for soft tissue engineering

Electrospinning is a long-known polymer processing technique that has received more interest and attention in recent years due to its versatility and potential use in the field of biomedical research. The fabrication of three-dimensional (3D) electrospun matrices for drug delivery and tissue engineering is of particular interest. In the present study, we identified optimal conditions to generate novel electrospun polymeric scaffolds composed of poly-d/l-lactide and poly-l-lactide in the ratio 50:50. Scanning electron microscopic analyses revealed that the generated poly(d/l-lactide-co-l-lactide) electrospun hybrid microfibers possessed a unique porous high surface area mimicking native extracellular matrix (ECM). To assess cytocompatibility, we isolated dermal fibroblasts from human skin biopsies. After 5 days of in vitro culture, the fibroblasts adhered, migrated and proliferated on the newly created 3D scaffolds. Our data demonstrate the applicability of electrospun poly(d/l-lactide-co-l-lactide) scaffolds to serve as substrates for regenerative medicine applications with special focus on skin tissue engineering.     

Body distribution of poly(<Emphasis Type="SmallCaps">d</Emphasis>,<Emphasis Type="SmallCaps">l</Emphasis>-lactide-<Emphasis Type="Italic">co</Emphasis>-glycolide) copolymer degradation products in rats

Poly (d,l-lactide-co-glycolide) (PLGA) copolymers are among the few synthetic polymers approved for human use, but the biocompatibility of PLGA-derived oligomers and particles remains questionable. Here, high molecular weight PLGA (Mw = 32,000) was radiolabeled with ¹²⁵I in chloroform solution, and the body distribution of PLGA copolymer degradation products was examined following subcutaneous implantation of round ¹²⁵I-PLGA films on the back of Sprague Dawley rats. Autoradiographic images of the PLGA implant taken at 2, 4, 6, 8, 10, and 12 weeks revealed that the central portion of the film degraded much more rapidly than the marginal portions. Examination of the body compartment distribution at these time points revealed that over one-half of the radioactivity was recovered from skin. The remaining radioactivity was concentrated in the blood, liver, and kidneys. Radioactivity steadily appeared in the blood and remained elevated up to 12 weeks after implantation, while the liver to kidney distribution began to decrease after 6 weeks. Cumulatively, these results indicate that the clearance of degraded particles and fragments from the implantation site is extremely delayed. Moreover, the degraded particles and fragments were selectively concentrated in the liver and kidneys, following release of degraded products into the bloodstream from the implantation site.     

Inference with progressively censored <Emphasis Type="Italic">k</Emphasis>-out-of-<Emphasis Type="Italic">n</Emphasis> system lifetime data

A system with n independent components which works if and only if a least k of its n components work is called a k-out-of-n system. For exponentially distributed component lifetimes, we obtain point and interval estimators for the scale parameter of the component lifetime distribution of a k-out-of-n system when the system failure time is observed only. In particular, we prove that the maximum likelihood estimator (MLE) of the scale parameter based on progressively Type-II censored system lifetimes is unique. Further, we propose a fixed-point iteration procedure to compute the MLE for k-out-of-n systems data. In addition, we illustrate that the Newton–Raphson method does not converge for any initial value. Finally, exact confidence intervals for the scale parameter are constructed based on progressively Type-II censored system lifetimes.     

Conducting poly(vinyl chloride)-<Emphasis Type="Italic">graft</Emphasis>-polythiophene: synthesis,characterization, and materials properties

A novel, and facile strategy for chemical, and electrochemical grafting of polythiophene onto poly(vinyl chloride) (PVC) is reported. For this purpose, a thiophene-functionalized PVC macromonomer was synthesized via a condensation reaction between phenylamine-functionalized PVC, and thiophene-2-carbaldehyde. The resultant macromonomer subsequently used in chemical, and electrochemical oxidation copolymerization with thiophene monomer to afford a poly(vinyl chloride)-graft-polythiophene (PVC-g-PTh) graft copolymer. The PVC-g-PTh obtained was characterized by means of Fourier transform infrared spectroscopy, and its electroactivity behavior was verified under cyclic voltammetric conditions. The electrical conductivities of the synthesized samples were measured using samples in which the conductive materials were sandwiched between two Ni electrodes at room temperature using the four probe technique. Moreover, thermal behaviors of the synthesized polymers were investigated by means of and thermogravimetric analysis.     

The search for novel superhard and incompressible materials on the basis of higher borides of <Emphasis Type="Italic">s</Emphasis>, <Emphasis Type="Italic">p</Emphasis>, <Emphasis Type="Italic">d</Emphasis> metals

The state of the art in the search for novel superhard and (or) incompressible materials on the basis of higher borides of s, p, d metals has been briefly reviewed. The information has been considered about experimental and theoretical studies of the following groups of borides: diborides of 4d, 5d heavy metals (Tc, Ru, Rh, Re, Os, and Ir), hexagonal tetraborides with the WB₄-type structure, and AMB₁₄ borides (where A, M are s, p metals) as well as of a number of related systems.     

<Emphasis Type="Italic">p</Emphasis>-<Emphasis Type="Italic">n</Emphasis> junctions in ZnO implanted with group V ions

n-Type ZnO〈Ga〉 films were implanted with 150-keV N⁺ (As⁺) ions to a dose of 7 × 10¹⁵ cm⁻² and then annealed in atomic oxygen at different temperatures. p-Type conductivity was obtained at annealing temperatures in the range 770–870 K. The parameters of the p-type layers were determined by photoluminescence spectroscopy, secondary ion mass spectrometry, and Hall effect measurements. According to the Hall data, the p-type layers had a resistivity of ∼30 Ω cm, carrier mobility of ∼2 cm²/(V s), and carrier concentration of ∼10¹⁸ cm⁻³. The electroluminescence spectra of the p-n junctions produced by ion implantation showed a band at 440 nm, due to recombination via donor-acceptor pairs.     

Evaluation of hydrogels for soft tissue adhesives <Emphasis Type="Italic">in vitro</Emphasis> and <Emphasis Type="Italic">in vivo</Emphasis> analyses

In this study, natural materials (sodium alginate, dextran, gelatin and carboxymethyl chitosan) were modified to get aldehyde components and amino components. Upon mixing the two-component solutions together, four kinds of Schiff base hydrogels formed successfully within 5-300 s and could seal the wound tissue. The cytotoxicity tests of hydrogel extraction solution confirmed that the hydrogels are nontoxic materials. The adhesive ability was evaluated in vivo by measuring the adhesive strength after sealing the skin incisions on the back of rats. All the hydrogels showed higher adhesive strength than that of commercial fibrin glue and the blank control. The histological staining observation by hematoxylin and eosin staining (HE) and Masson’s trichrome staining (MTC) methods suggested that the hydrogels had good biocompatibility and biodegradation in vivo. They have only normal initial inflammation to skin tissue and could improve the formation of new collagen in the incision section. So, the prepared hydrogels were both safe and effective tissue adhesive, which had the great potentials to be used as skin tissue adhesive.     

Journal Impact Factors for evaluating scientific performance: use of <Emphasis Type="Italic">h</Emphasis>-<Emphasis Type="Italic">like</Emphasis> indicators

This article introduces the Impact Factor squared or IF²-index, an h-like indicator of research performance. This indicator reflects the degree to which large entities such as countries and/or their states participate in top-level research in a field or subfield. The IF²-index uses the Journal Impact Factor (JIF) of research publications instead of the number of citations. This concept is applied to other h-type indexes and their results compared to the IF²-index. These JIF-based indexes are then used to assess the overall performance of cancer research in Australia and its states over 8 years from 1999 to 2006. The IF²-index has three advantages when evaluating larger research units: firstly, it provides a stable value that does not change over time, reflecting the degree to which a research unit participated in top-level research in a given year; secondly, it can be calculated closely approximating the publication date of yearly datasets; and finally, it provides an additional dimension when a full article-based citation analysis is not feasible. As the index reflects the degree of participation in top-level research it may favor larger units when units of different sizes are compared.     

<Emphasis Type="Italic">In vitro</Emphasis> and <Emphasis Type="Italic">in vivo</Emphasis> evaluation of bone morphogenetic protein-2 (BMP-2) immobilized collagen-coated polyetheretherketone (PEEK)

Polyetheretherketone (PEEK) is regarded as one of the most potential candidates of biomaterials in spinal implant applications. However, as a bioinert material, PEEK plays a limited role in osteoconduction and osseointegration. In this study, recombinant human bone morphogenetic protein-2 (rhBMP-2) was immobilized onto the surface of collagen-coated PEEK in order to prepare a multi-functional material. After adsorbed onto the PEEK surface by hydrophobic interaction, collagen was cross-linked with N-(3-dimethylaminopropyl)-N′-ethyl carbodiimide hydrochloride (EDC) and N-hydroxysuccinimide (NHS). EDC/NHS system also contributed to the immobilization of rhBMP-2. Water contact angle tests, XPS and SEM clearly demonstrated the surface changes. ELISA tests quantified the amount of rhBMP-2 immobilized and the release over a period of 30 d. In vitro evaluation proved that the osteogenesis differentiation rate was higher when cells were cultured on modified PEEK discs than on regular ones. In vivo tests were conducted and positive changes of major parameters were presented. This report demonstrates that the rhBMP-2 immobilized method for PEEK modification increase bioactivity in vitro and in vivo, suggesting its practicability in orthopedic and spinal clinical applications.     

High-pressure behavior and Hirshfeld surface analysis of nitrogen-rich materials: triazido-<Emphasis Type="Italic">s</Emphasis>-triazine (TAT) and triazido-<Emphasis Type="Italic">s</Emphasis>-heptazine (TAH)

Triazido-s-triazine (TAT) and triazido-s-heptazine (TAH) are two kinds of effective nitrogen-rich precursors for carbon nitride nanomaterials and potential high-energy density materials. In this work, the high-pressure behavior (0–500 GPa) and Hirshfeld surface of crystalline TAT and TAH were studied in details to better compare and reveal their stabilities. Crystal and molecular structures of TAT and TAH largely changed with the increase in pressure. The distortion of rings happens at 171 GPa for TAT and 483 GPa for TAH. The azide/tetrazole (AZ/TZ) isomerization happens in crystalline TAT, and the tetrazole ring forms at 266 GPa for the first time, while this phenomenon has not been observed in crystalline TAH during the whole process. Hirshfeld surface analyses intuitively show that: (1) both compounds possess the planar conjugated molecular structures; (2) N…N nonbonding interactions contribute a lot to stabilize their crystal packings; and (3) TAH is much more resistant to high pressure and more stable than TAT. The systematic investigation gives a guidance to understand the physical and chemical behaviors of nitrogen-rich azidoheterocyclic materials.     

Elastomeric electrospun scaffolds of poly(<Emphasis Type="SmallCaps">l</Emphasis>-lactide-<Emphasis Type="Italic">co</Emphasis>-trimethylene carbonate) for myocardial tissue engineering

In myocardial tissue engineering the use of synthetically bioengineered flexible patches implanted in the infarcted area is considered one of the promising strategy for cardiac repair. In this work the potentialities of a biomimetic electrospun scaffold made of a commercial copolymer of (l)-lactic acid with trimethylene carbonate (P(l)LA-co-TMC) are investigated in comparison to electrospun poly(l)lactic acid. The P(l)LA-co-TMC scaffold used in this work is a glassy rigid material at room temperature while it is a rubbery soft material at 37°C. Mechanical characterization results (tensile stress–strain and creep-recovery measurements) show that at 37°C electrospun P(l)LA-co-TMC displays an elastic modulus of around 20 MPa and the ability to completely recover up to 10% of deformation. Cell culture experiments show that P(l)LA-co-TMC scaffold promotes cardiomyocyte proliferation and efficiently preserve cell morphology, without hampering expression of sarcomeric alpha actinin marker, thus demonstrating its potentialities as synthetic biomaterial for myocardial tissue engineering.     

Nernst Signal in High-<Emphasis Type="Italic">T</Emphasis><Subscript><Emphasis Type="Italic">c</Emphasis></Subscript> Superconductors

The time-dependent Ginzburg–Landau equation with thermal noise is used to calculate the Nernst signal e _N , describing the Nernst effect, in type-II superconductor in the vortex-liquid regime. The Gaussian method used is an elaboration of the Hartree–Fock method. An additional assumption often made in analytical calculations that only the lowest Landau level significantly contributes to physical quantities of interest in the high-field limit is lifted by including all the Landau levels. The values of e _N are in good quantitative agreement with experimental data for temperature close to T _c on Bi₂Sr₂CaCu₂O_8+δ and Bi₂Sr₂Ca₂Cu₃O_10+δ .     

Material Effect and Steam Explosion at High Temperature (<Emphasis Type="Italic">T</Emphasis> > <Emphasis Type="Bold">2300</Emphasis> K)

In the frame of nuclear power plant safety, the interaction of molten corium (mixture of materials coming from a power plant) with water can generate dynamic loading of the surrounding structures. This phenomenon is called the steam explosion. Many experiments have been performed in the KROTOS facility with simulation materials (Al₂O₃) and prototypical materials (U,Zr)O₂, and different behaviors attributed to a ‘material effect’ have been observed. Alumina melts produced spontaneous energetic steam explosions, whereas explosions with corium melts (80% UO₂–20% ZrO₂) must be triggered and are less energetic. These differences may be partly attributed to the formation of meta-stable gamma alumina and the ability of liquid alumina to dissolve part of the water, acting like an internal trigger. These results mean that alumina is probably not an adequate simulation of the corium for steam explosion. Paper presented at the Seventh International Workshop on Subsecond Thermophysics, October 6–8, 2004, Orléans, France.     

Project of laser-pumped quantum <Emphasis Type="Italic">M</Emphasis><Subscript><Emphasis Type="Italic">X</Emphasis></Subscript> magnetometer

The possibility of creating a new scheme of a laser-pumped quantum magnetometric device based on a double-beam M _X magnetometer is considered. The proposed system ensures the simultaneous measurement of the modulus of the Earth’s magnetic field vector (with an absolute accuracy of 0.02 nT) and two angles of deviation of this vector with an absolute accuracy and sensitivity of not worse than 0.4″ (0.1 nT) at a measurement time of τ = 1 s. In contrast to the known analogous systems, the proposed scheme does not require generating additional magnetic fields.