Improved photodegradation activity of SnO<Subscript>2</Subscript> nanopowder against methyl orange dye through Ag doping

Silver doped tin oxide (SnO₂:Ag) nanopowders were synthesized by a simple soft chemical route with 0, 5, 10 and 15 wt% concentrations of Ag. The structural, morphological, optical, photoluminescence and photocatalytic properties of the synthesized samples were studied and the results obtained are reported in this paper. XRD studies confirm the polycrystalline nature of the synthesized samples. The undoped and doped samples exhibit a strong (1 0 1) preferential growth. Decreased crystallite size is observed with Ag doping. Nanosized grains were observed for the doped samples. Peak related to Sn–O–Sn lattice vibration is observed for both the undoped and doped samples in the FTIR spectra. Peaks related to oxygen vacancies were observed at 362 and 499 nm for all the samples in the PL spectra. Enhanced photocatalytic activity was observed for the doped samples and the SnO₂:Ag nanopowder with 10 wt% Ag doping concentration exhibited maximum photodegradation efficiency against the degradation of methyl orange dye.     

Visible light irradiated photocatalytic and magnetic properties of Fe-doped SnS<Subscript>2</Subscript> nanopowders

Fe-doped SnS₂ (SnS₂:Fe) nanopowders were synthesized by cost effective chemical method and characterized by thermo gravimetric-differential thermal analysis, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy and vibrating sample magnetometer techniques. The photocatalytic activity was evaluated for the degradation of congo red dye under visible light irradiation. XRD studies indicate that both the undoped and doped SnS₂ nanopowders exhibit hexagonal crystal structure with a strong (1 0 1) preferential growth. Nanosized grains are evinced from the TEM images. XPS spectra confirmed the presence of Fe in the doped samples. Photodegradation efficiency increased with increase in Fe doping concentration and the SnS₂:Fe nanopowder with 10 wt% Fe doping concentration exhibits a maximum efficiency of 93.94% after 180 min light irradiation. Ferromagnetic ordering of pure SnS₂ improved with Fe doping. The outcome of the results indicated that Fe-doped SnS₂ nanopowders are well suited as diluted magnetic semiconductor and also can be used as an efficient photocatalyst.     

Synthesis and enhanced ethanol sensing performance of nanostructured Sr doped SnO<Subscript>2</Subscript> thick film sensor

In the present paper we have synthesized pristine and Sr doped SnO₂ in order to prepare a selective ethanol sensor with rapid response–recovery time and good repeatability. Pristine as well as Sr (2, 4 and 6 mol%) doped SnO₂ nanostructured powder was synthesized by using a facile co-precipitation method. The samples were characterized by TG–DTA, XRD, HR-TEM, SAED, FEG-SEM, SEM–EDAX, XPS, UV–Vis and FTIR spectroscopy techniques. The gas response performance of sensor towards ethanol, acetone, liquid petroleum gas and ammonia has been carried out. The results demonstrate that Sr doping in SnO₂ systematically decreases crystallite size, increases the porosity and hence enhances the gas response properties of pristine SnO₂ viz. lower operating temperature, higher ethanol response and better selectivity towards ethanol. The response and recovery time for 4 mol% Sr doped SnO₂ thick film sensor at the operating temperature of 300 °C were 2 and 7 s, respectively.     

Effect of hydrolysis ratio on structural,optical and electrical properties of SnO2 nanoparticles synthesized by polyol method

Using the polyol method and a thermal post-treatment, nanoporous tin dioxide (SnO₂) were prepared at different hydrolysis ratio (h = n (H₂O)/n (Sn)). The influence of the hydrolysis ratio on the structural, textural, optical and electrical properties of SnO₂ nanopowders was investigated by employing a set of various techniques including Fourier Transform Infra-Red spectroscopy (FTIR), X-ray diffraction (XRD), transmission electron microscopy (TEM), Energy Dispersive X-ray spectroscopy (EDX), Scanning Electron Microscopy (SEM), Nitrogen Sorption Porosimetry and Impedance Spectroscopy. FTIR and EDX studies revealed that SnO₂ species were obtained. Nanocrystallites of cassiterite, i.e. rutile-like tetragonal SnO₂ structure, were formed after annealing in air at 700 °C and the average crystallite size increased from 12.8 to 29.1 when the hydrolysis ratio rose from 17 to 24. Moreover, TEM, SEM, and N₂ sorption porosimetry investigations indicated that the sample prepared for h = 17 was composed of an aggregated network of almost spherical nanoparticles, the morphology and sizes of which changed with the increase in the hydrolysis ratio to h = 24 and the mesoporosity of which was found to be linked to the interparticle space. Moreover, this increase in mean nanoparticle size was accompanied by a decrease in the band gap value from 3.4 eV (h = 17) to 3.16 eV (h = 24). Finally, bulk conductivity dependence with temperature was found to follow an Arrhenius law for samples annealed at 700 °C with an activation energy of 0.65 eV for h = 17, 0.69 eV for h = 20 and 0.71 eV for h = 24 that is typical of SnO₂ nanopowders.     

Popcorn like morphology and absence of room temperature ferromagnetism in Ni doped SnO<Subscript>2</Subscript> nanoparticles

Ni-doped SnO₂ nanoparticles were synthesized by the microwave oven assisted solvothermal method. The structural characterization was done by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy. The outcomes confirmed that Ni-doped SnO₂ nanoparticles have a pure rutile-type tetragonal phase of SnO₂ structures with a high degree of crystallization and a crystallite size of 10–14 nm. Popcorn like SEM morphology of the nickel doped sample is shown. Optical characterization was done by UV–Vis spectrometer, fluorescence spectroscopy and electron paramagnetic resonance spectroscopy. Magnetic characterization was done by vibrating sample magnetometer (VSM). The VSM measurements revealed that the Ni doped SnO₂ powder samples were diamagnetic at room temperature. This diamagnetic result is in contradiction to earlier published results.     

Investigation of ethanol gas sensing properties of Dy-doped SnO<Subscript>2</Subscript> nanostructures

In this paper we report doping induced enhanced sensor response of SnO₂ based sensor towards ethanol at a working temperature of 200 °C. Undoped and dysprosium-doped (Dy-doped) SnO₂ nanoparticles were characterized by X-ray diffraction (XRD), Raman spectroscopy, transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). XRD and Raman results verified tetragonal rutile structure of the prepared samples. It has been observed that crystallite size reduced with increase in dopant concentration. In addition, the particle size has been calculated from Raman spectroscopy using phonon confinement model and the values match very well with results obtained from TEM and X-ray diffraction investigations. Dy-doped SnO₂ sensors exhibited significantly enhanced response towards ethanol as compared to undoped sensor. The optimum operating temperature of doped sensor reduced to 200 °C as compared to 320 °C for that of undoped sensor. Moreover, sensor fabricated from Dy-doped SnO₂ nanostructures was highly selective toward ethanol which signifies its potential use for commercial applications. The gas sensing mechanism of SnO₂ and possible origin of enhanced sensor response has been discussed.     

Band gap narrowing and photocatalytic studies of Nd<Superscript>3+</Superscript> ion-doped SnO<Subscript>2</Subscript> nanoparticles using solar energy

Pure and Nd³⁺-doped tin oxide (SnO₂) nanoparticles have been prepared by the sol–gel method and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution TEM, energy-dispersive spectroscopy and UV–visible spectroscopy. The XRD patterns of all the samples are identified as tetragonal rutile-type SnO₂ phase which is further confirmed by TEM analysis. Neodymium doping introduces band gap narrowing in the prepared samples and enhances their absorption towards the visible-light region. The photocatalytic activity of all the samples was evaluated by monitoring the degradation of methylene blue solution under day light illumination and it was found that the photocatalytic activity significantly increases for the samples calcined at 600 than 400°C, which is due to the effective charge separation of photogenerated electron–hole pairs. The efficiency of photocatalysts was found to be related to neodymium doping percentage and calcination temperature.     

Synthesis of silver and sulphur codoped TiO<Subscript>2</Subscript> nanoparticles for photocatalytic degradation of methylene blue

In the present work, silver and sulphur codoped TiO₂ (Ag–S/TiO₂) photocatalysts were effectively prepared by sol–gel technique. The prepared samples were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), energy dispersive x-ray analysis (EDX), Fourier transform infrared (FTIR) spectroscopy, diffuse reflectance UV–Vis spectroscopy (UV-DRS) and photoluminescence (PL). The XRD patterns consisted of anatase crystalline phases and the particle size and shape of the prepared samples were observed by SEM and HR-TEM. The presence of doping ions was confirmed by EDX analysis, the decreased band-gap energy of Ag–S codoped TiO₂ nanoparticles was investigated by UV-DRS. The decreased in the intensity of Ag–S codoped TiO₂ was absorbed due to the lower separation of electron–hole pairs were confirmed by PL spectrum. The Ag–S codoped TiO₂ showed higher photocatalytic activity than pure and single-doped TiO₂ in the photodegradation of methylene blue (MB) aqueous solution under visible light irradiation. The given work was a good model to associate the considering of the synergistic effect of metal and non-metal codoped TiO₂ in the photocatalysis and photo electrochemistry.     

Synthesis and characterization of electrochemically-reduced graphene

Graphene has superior electrical conductivity than graphite and other allotropes of carbon because of its high surface area and chemical tolerance. Electrochemically processed graphene sheets were obtained through the reduction of graphene oxide from hydrazine hydrate. The prepared samples were heated to different temperatures such as 673 and 873 K. X-ray diffraction (XRD), fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDXS), transmission electron microscopy (TEM), Raman spectra and conductivity measurements were made for as-prepared and heat-treated graphene samples. XRD pattern of graphene shows a sharp and intensive peak centred at a diffraction angle (2θ) of 26·350. FTIR spectra of as-prepared and heated graphene were used to confirm the oxidation of graphite. TEM results indicated that the defect density and number of layers of graphene sheets were varied with heating temperature. The hexagonal sheet morphology and purity of as-prepared and heat treated samples were confirmed by SEM–EDX and Raman spectroscopy. The conductivity measurements revealed that the conductivity of graphene was decreased with an increase in heating temperature. The present study explains that graphene with enhanced functional properties can be achieved from the as-prepared sample.     

Effect of Zr Addition on Bi<Subscript>1.8</Subscript>Pb<Subscript>0.4</Subscript>Sr<Subscript>2.0</Subscript>Ca<Subscript>1.1</Subscript>Cu<Subscript>2.1</Subscript>O<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript> Superconductor

The polycrystalline Bi_1.8Pb_0.4Sr_2.0Ca_1.1Cu_2.1 M_xO _y , with M = Zr (x = 0.0, 0.02, 0.04), were synthesized by solid-state reaction method and studied by X-ray diffraction analysis (XRD), scanning electron microscopy equipped with energy dispersive of X-ray analysis (SEM/EDX) and resistivity versus temperature measurements. The influence of the Zr addition on the Tc and microstructure properties of the superconducting compounds has been studied. SEM observations show whiskers grains randomly distributed and microstructural change due to the addition of Zr. The ZrO₂ was incorporated into the crystalline structure of BSCCO system in all samples. The crystallographic structure remains in a tetragonal form where a= b≠c. Generally, all samples exhibit semiconductor behaviour above \(T_{\mathrm {c}}^{\text {onset}}\). The onset critical temperature \(T_{\mathrm {c}}^{\text {onset}}\) increases up to 86 with x = 0.02. There is an enhancement in the critical temperature for doped samples as compared with pure Bi_1.8Pb_0.4Sr_2.0Ca_1.1Cu_2.1O _y .Changes in superconducting properties of ZrO₂ nanoparticle added Bi-2212 system were discussed.     

Hydrothermal synthesis of hemisphere-like F-doped anatase TiO<Subscript>2</Subscript> with visible light photocatalytic activity

Hemisphere-like F-doped anatase TiO₂ has been synthesized by hydrothermal treatment of TiF₄ aqueous solution in the presence of starch at 130 °C for 10 h, and then calcined at 450 °C for 2.5 h in air. The as-synthesized product has been investigated by photocatalytic reaction test and characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray (EDX) spectroscopy, X-ray photoelectron spectroscopy (XPS), and UV–Vis diffuse reflectance spectra (DRS). The results showed that fluorine was successfully doped into the TiO₂ hemispheres. The F-doped TiO₂ hemispheres showed high visible light activity in degradation of acid orange II, which could be attributed to the creation of oxygen vacancies and good crystallinity.     

The influence of aluminium on the overall properties of SnO<Subscript>2</Subscript>-based varistors

The influence of aluminium on the development of the microstructure and on the electrical behaviour of the SnO₂ · Co₃O₄ · Nb₂O₅ typical varistor system was studied. Two sources of Al were used, alumina (Al₂O₃) and boehmite (AlO(OH)). The microstructural features were characterised with scanning (SEM) and transmission (TEM) electron microscopies. The different phases present in the studied samples were also studied with XRD, EDS and electron diffraction patterns of selected areas (SAED). Particles containing Sn, Co, Al, and O were unveiled with TEM. Impedance spectroscopy measurements and current density versus electric field characteristics revealed superior electrical properties for samples with AlO(OH). The higher non-linearity (α = 19) was achieved with the addition of 0.1% mol of boehmite. The influence of the secondary phases on the electrical properties is also addressed in this work.     

D.C. conductivity and spectroscopic studies of polyaniline doped with binary dopant ZrOCl<Subscript>2</Subscript>/AgI

Aqueous binary dopant (ZrOCl₂/AgI) is used in different ratios such as 1:1, 1:2 and 2:1 (w/w) for chemical doping to enhance the conductivity of synthesized polyaniline (PANI). The doping of polyaniline is carried out using tetrahydrofuran as a solvent. Doped samples are characterized using various techniques such as I–V characteristics, UV-visible spectroscopy, X-ray diffractometry (XRD), FTIR and photoluminescence (PL) studies. A significant enhancement in d.c. conductivity has been observed with the introduction of binary dopant. UV-visible study shows that optical parameters change considerably after doping. Interestingly, both direct and indirect bandgaps are observed in the doped samples. XRD patterns show the semi-crystalline nature of doped polyaniline. FTIR study shows structural modifications in functional groups with doping in PANI. Photoluminescence spectra exhibit emission properties of the samples.     

Template assisted synthesis of SnO<Subscript>2</Subscript> nanorods by immerse and filtration technique,vacuum and drop setting

Honeycomb-shaped and ordered arrays of nanopore AAO template with a uniform pores size was produced utilizing a two-step an anodization process. Highly ordered SnO₂ nanorods arrays have been selectively fabricated via a convenient (immerse and filtration) technique and (vacuum and drop) setting using anodic aluminum oxide (AAO) as a hard template. The morphology of the samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (FESEM), and Energy-dispersive X-ray spectroscopy (EDX) techniques. The optical characterizations were examined by UV-VIS and Photoluminescence (PL). Scanning microscopy images indicate that the SnO₂ nanorods are relatively uniform with the outer diameter matching well with the pore diameter. XRD and EDX indicated that these polycrystalline SnO₂ nanostructures with well-defined composition were obtained.     

Water-assisted growth and characterization of SnO2 nanobelts

SnO₂ nanobelts have been synthesized by water-assisted growth at 850 °C using high pure Sn powders as the source materials. The as-synthesized products were studied by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy(TEM), high-resolution transmission electron microscopy (HRTEM), energy dispersed X-ray spectroscopy (EDX), infrared spectrum (IR) and room-temperature photoluminescence (PL) spectrum. XRD pattern of the sample is quite in accord with the standard pattern of the tetragonal rutile SnO₂; SEM and TEM images show that the uniform single-crystalline SnO₂ nanobelts are about tens of micrometers in length, 70-100 nm in width and 5-8 nm in thickness, and is smooth in surface. The special IR and PL properties were also detected by IR and PL testing. The growth mechanisms and special properties relative to the SnO₂ nanostructures are discussed.     

Influence of magnetic ion doping on structural,optical, magnetic and hyperfine properties of nanocrystalline SnO<Subscript>2</Subscript> based dilute magnetic semiconductors

This article reports the structural, optical and magnetic properties of transition metal (Ni, Co, Mn and Fe) doped SnO₂ nanoparticles prepared by modified Pechini sol–gel method. From the X-ray diffraction studies, it is obvious that all the synthesized samples show a phase purity of rutile tetragonal crystal structure of SnO₂. The morphology was studied and the particle sizes were estimated from the field emission scanning electron microscopy. From photoluminescence spectra, we observed emission due to the presence of singly ionized oxygen vacancies. Raman spectroscopy shows dominant peaks at 644 and 782 cm^?1 which were ascribed to A_1g and B_2g modes of the rutile structure. Isomer shifting due to dopant addition and large quadrupole splitting due to surface defects were observed in Mössbauer spectra. All the samples show ferromagnetic ordering up to 1 T. The relatively stronger ferromagnetic nature in Fe and Co doped SnO₂ is due to the strong p–d exchange interaction. In case of Ni and Mn doped SnO₂ samples, the lack of carrier-mediated interaction due to its inherent semiconducting nature reduces the total magnetic moment observed in these samples. The exchange coupling depends on the dopant type and its concentration.     

Electrical and optical studies in polyaniline nanofibre–SnO2 nanocomposites

Polyaniline nanofibre–tin oxide (PAni-SnO₂) nanocomposites are synthesized and mixed with polyvinyl alcohol (PVA) as stabilizer to cast free-standing films. Composite films are characterized by X-ray diffraction studies (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), photoluminescence spectroscopy (PL) and UV-visible spectroscopy. XRD confirms the formation of PAni nanofibre–SnO₂ nanocomposite. From TEM images, diameter of the polyaniline nanofibre and SnO₂ nanoparticles in the PAni-SnO₂ nanocomposite are found to be 20–60 nm. SEM results show fibrous morphology of the PAni nanofibre and spherical morphology of polyaniline-SnO₂ composites. The nanocomposites exhibit high relative photoluminescence intensity in violet as well as green–yellow region of visible spectrum. From electrical conductivity measurement, it is confirmed that PAni nanofibre–SnO₂ nanocomposite follows Mott’s one-dimensional variable range hopping (VRH) model.     

Magnetic properties of (Co,Al) co-doped SnO<Subscript>2</Subscript> nanoparticles

The desired size of pure SnO₂ and Co (1, 3, 5 mol%) with constant 5 mol% of Al co-doped into SnO₂ nanoparticles are synthesized by chemical co-precipitation method. The raw materials used in synthesis are SnCl₂.2H₂O, AlCl₃, Co (C₂H₃O₂).4H₂O, aqueous NH₄OH and Polyethyleneglycol (PEG) from AR grade. The XRD pattern of pure and co-doped samples confirm the formation of tetragonal rutile phase of SnO₂ nanoparticles with average particle size 25 and 20 nm respectively. Micrographs of scanning electron microscope (SEM) for pure and (Co, Al) co-doped into SnO₂ show that the prepared nanoparticles are agglomerate and spherical in shape. The EDAX spectra of prepared nanoparticles indicate the presence of Co²⁺, Al³⁺, Sn⁴⁺ and O²⁺ and also confirm stoichiometric proportions of raw material in the formation of SnO₂. Transmission electron microscope (TEM) reveals that the surface morphology of pure and co-doped samples are spherical, and average size of particles is ~20 nm. Magnetization measurements from M-H curves of VSM show that the ferromagnetism at low concentration of Co and at higher concentration of Co shows weak ferromagnetism due to super exchange coupling among neighboring ions. The bound magnetic polarons model supports the observed ferromagnetic behavior.     

One-step synthesis of monodispersed antimony-doped tin oxide suspension

Antimony-doped tin oxide (ATO) suspension with monodispersion has been directly synthesized by hydrothermal method by using mixed Sb/Sn hydroxide solution as precursor, and temperature control has been used during the crystal growth. The ATO particles were characterized by XRD, TEM, SEM–EDS and resistance test. X-ray diffraction shows that all Sb ions come into the SnO₂ lattice to substitute Sn ions. The crystallinity and doping of Sb are improved through stage heating, compared with that at constantly high temperature. TEM and SEM images indicate the ATO nanoparticles are monodispersed with the size ranging from 10 to 15 nm. The process of stage heating can enhance Sb doped level and realize the synthesis of monodispersed doped oxide particles under low temperature in a short time. The possible growth mechanism is proposed.     

Simple Hydrothermal Synthesis for Mesoporous Pebble-Like NiCo<Subscript>2</Subscript>O<Subscript>4</Subscript> Nanostructures and Their Attractive Magnetic Properties

The mesoporous pebble-like NiCo₂O₄ nanostructures were smoothly obtained via a simple hydrothermal route and the succeeding annealing treatment. Various techniques, including XRD, SEM, TEM, Raman spectra, FTIR, and MH curves have been used to study the obtained products. The obtained results exhibited that the morphology of spinel NiCo₂O₄ could be controlled by adjusting the content of cetyltrimethylammonium bromide (CTAB). The morphology of NiCo₂O₄ nanostructures transformed from a 300-nm popcorn-like to 30–40-nm pebble-like nanostructure by changing the content of CTAB. Compared with the popcorn-like NiCo₂O₄ nanostructures, the pebble-like samples showed effective blue shifting of Raman spectroscopy, which might be due to the nano-sized effect of NiCo₂O₄ particles. Finally, vibration sample magnetometer (VSM) measurements indicated the samples transformed from weak ferromagnetic (popcorn-like) to paramagnetic (pebble-like) due to small particle size.