Effects of trimesic acid-Ni based metal organic framework on the hydrogen sorption performances of MgH2

A metal-organic framework based on Ni (II) as metal ion and trimasic acid (TMA) as organic linker was synthesized and introduced into MgH₂ to prepare a Mg-(TMA-Ni MOF)-H composite through ball-milling. The microstructures, phase changes and hydrogen storage behaviors of the composite were systematically studied. It can be found that Ni ion in TMA-Ni MOF is attracted by Mg to form nano-sized Mg₂Ni/Mg₂NiH₄ after de/rehydrogenation. The hydriding and dehydriding enthalpies of the Mg-MOF-H composite are evaluated to be −74.3 and 78.7 kJ mol⁻¹ H₂, respectively, which means that the thermodynamics of Mg remains unchanged. The absorption kinetics of the Mg-MOF-H composite is improved by showing an activation energy of 51.2 kJ mol⁻¹ H₂. The onset desorption temperature of the composite is 167.8 K lower than that of the pure MgH₂ at the heating rate of 10 K/min. Such a significant enhancement on the sorption kinetic properties of the composite is attributed to the catalytic effects of the nanoscale Mg₂Ni/Mg₂NiH₄ derived from TMA-Ni MOF by providing gateways for hydrogen diffusion during re/dehydrogenation processes.     

Trimesic acid-Ni based metal organic framework derivative as an effective destabilizer to improve hydrogen storage properties of MgH2

Herein, a new type of trimesic acid-Ni based metal organic framework (TMA-Ni MOF) was synthesized and then, its derivative Ni@C was introduced into MgH₂ as destabilizer through high energy ball milling to prepare a Mg–Ni@C–H composite. X-ray diffraction analyses indicate the formation of Mg₂Ni/Mg₂NiH₄ as major phases after dehydrogenation/rehydrogenation of the composite, respectively. Two hydrogen absorption plateaus are observed in the Mg–Ni@C–H composite, corresponding to the hydrogenation of Mg and Mg₂Ni, with the enthalpy change values of −75.8 and −52.3 kJ mol⁻¹ H₂ respectively. Thus, it can be concluded that a destabilization effect is brought by Ni@C on thermodynamic properties of MgH₂. In addition, the hydriding/dehydriding kinetics of MgH₂ is notably accelerated with the addition of Ni-based MOF derivative. The activation energy values of both hydrogen absorption and desorption are significantly lowered down with the assistance of Ni@C. Moreover, stable hydrogen de/absorption capacity and kinetics are remained during 25 cycles of high-rate re/dehydrogenation, which can be ascribed to the carbon-wrapped structure of the composite, with which the aggregation of the nanosized particles can be evidently avioded.     

Microstructural evolution and hydrogen storage proprieties of melt-spun eutectic Mg76.87Ni12.78Y10.35 alloy with low hydrides formation/decomposition enthalpy

Ternary eutectic Mg_76.87Ni_12.78Y_10.35 (at. %) ribbons with mixed amorphous and nanocrystalline phases were prepared by melt spinning. The microstructures of the melt-spun, hydrogenated and dehydrogenated samples were examined and compared by X-ray diffraction and transmission electron microscopy. The amorphous structure transforms into a thermally stable nanocrystalline structure with a grain size of about 5 nm during hydrogen ab/desorption cycles. The Mg, Mg₂Ni and phases with Y in the melt-spun state transform into MgH₂, Mg₂NiH₄, Mg₂NiH_0.3, YH₂ and YH₃ after hydrogenation, and transform back to Mg, Mg₂Ni and YH₂ upon subsequent dehydrogenation. The reaction enthalpy (ΔH) and entropy (ΔS) of the higher plateau pressure corresponding to Mg₂Ni hydride formation are −53.25 kJ mol⁻¹ and −107.74 J K⁻¹ mol⁻¹, respectively. The amorphous/nanocrystalline structure effectively reduces the enthalpy and entropy of Mg₂Ni hydride formation, but has little effect on Mg. The activation energy for dehydrogenation of the hydrogenated ribbons is 69 kJ mol⁻¹. This suggests that Mg–Ni–Y with ternary eutectic composition can form an amorphous/nanocrystalline structure by melt spinning, and this nanostructure efficiently improves the thermodynamics and kinetics for hydrogen storage.     

Remarkable synergistic effects of Mg2NiH4 and transition metal carbides (TiC,ZrC, WC) on enhancing the hydrogen storage properties of MgH2

Nanostructuring and catalyzing are effective methods for improving the hydrogen storage properties of MgH₂. In this work, transition-metal-carbides (TiC, ZrC and WC) are introduced into Mg–Ni alloy to enhance its hydrogen storage performance. 5 wt% transition-metal-carbide containing Mg₉₅Ni₅ (atomic ratio) nanocomposites are prepared by mechanical milling pretreatment followed by hydriding combustion synthesis and mechanical milling process, and the synergetic enhancement effects of Mg₂NiH₄ and transition-metal-carbides are investigated systematically. Due to the inductive effect of Mg₂NiH₄ and charge transfer effect between Mg/MgH₂ and transition-metal-carbides, Mg₉₅Ni₅-5 wt.% transition-metal-carbide samples all exhibit excellent hydrogen storage kinetic at moderate temperature and start to release hydrogen around 216 °C. Among them, 2.5 wt% H₂ (220 °C) and 4.7 wt% H₂ (250 °C) can be released from the Mg₉₅Ni₅-5 wt.% TiC sample within 1800 s. The unique mosaic structure endows the Mg₉₅Ni₅-5 wt.% TiC with excellent structural stability, thus can reach 95% of saturated hydrogen capacity within 120 s even after 10 cycles of de-/hydrogenation at 275 °C. And the probable synergistic enhancement mechanism for hydrogenation and dehydrogenation is proposed.     

Remarkable kinetics of novel Ni@CeO2–MgH2 hydrogen storage composite

Magnesium hydroxide (MgH₂) has excellent reversibility and high capacity, and is one of the most promising materials for hydrogen storage in practical applications. However, it suffers from high dehydrogenation temperature and slow sorption kinetics. Rare earth hydrides and transition metals can both significantly improve the de/hydrogenation kinetics of MgH₂. In this work, MgH₂–Mg₂NiH₄–CeH_2.73 is in-situ synthesized by introducing Ni@CeO₂ into MgH₂. The unique coating structure of Ni@CeO₂ facilitates homogeneous distribution of synergetic CeH_2.73 and Mg₂NiH₄ catalytic sites in subsequent ball milling process. The as-fabricated composite MgH₂-10 wt% Ni@CeO₂ powders possess superior hydrogenation/dehydrogenation characteristics, absorbing 4.1 wt% hydrogen within 60 min at 100 °C and releasing 5.44 wt% H₂ within 10 min at 350 °C. The apparent activation energy of MgH₂-10 wt% Ni@CeO₂ is determined to be 84.8 kJ/mol and it has favorable hydrogen cycling stability with almost no decay in capacity after 10 cycles.     

Facile synthesis of nickel-vanadium bimetallic oxide and its catalytic effects on the hydrogen storage properties of magnesium hydride

To improve the dehydrogenation/hydrogenation performance of magnesium hydride (MgH₂), a nickel-vanadium bimetallic oxide (NiV₂O₆) was prepared by a simple hydrothermal method using ammonium metavanadate and nickel nitrate as raw materials. This oxide was used to improve the hydrogen storage performance of MgH₂. NiV₂O₆ reacted with Mg to form Mg₂Ni and V₂O₅; Mg₂Ni and V₂O₅ played an important role in improving the hydrogen storage properties of MgH₂. The NiV₂O₆-doped MgH₂ had an excellent hydrogen absorption and desorption kinetics performance, and it could absorb 5.59 wt% of hydrogen within 50 min at 150 °C and release about 5.3 wt% of hydrogen within 12 min. The apparent activation energies for the dehydrogenation and hydrogenation of MgH₂-NiV₂O₆ were 92.9 kJ mol^?1 and 24.9 kJ mol^?1, respectively. These were 21.7% and 66.3% lower than those of MgH_2, respectively. The mechanism analysis demonstrated that the improved kinetic properties of MgH₂ resulted from the heterogeneous catalysis of vanadium and nickel.     

Effect of Ni/tubular g-C3N4 on hydrogen storage properties of MgH2

Additive doping is one of the effective methods to overcome the shortcomings of MgH₂ on the aspect of relatively high operating temperatures and slow desorption kinetics. In this paper, hollow g-C₃N₄ (TCN) tubes with a diameter of 2 μm are synthesized through the hydrothermal and high-temperature pyrolysis methods, and then nickel is chemically reduced onto TCN to form Ni/TCN composite at 278 K. Ni/TCN is then introduced into the MgH₂/Mg system by means of hydriding combustion and ball milling. The MgH₂–Ni/TCN composite starts to release hydrogen at 535 K, which is 116 K lower than the as-milled MgH₂ (651 K). The MgH₂–Ni/TCN composite absorbs 5.24 wt% H₂ within 3500 s at 423 K, and takes up 3.56 wt% H₂ within 3500 s, even at a temperature as low as 373 K. The apparent activation energy (E_a) of the MgH₂ decreases from 161.1 to 82.6 kJ/mol by the addition of Ni/TCN. Moreover, the MgH₂–Ni/TCN sample shows excellent cycle stability, with a dehydrogenation capacity retention rate of 98.0% after 10 cycles. The carbon material enhances sorption kinetics by dispersing and stabilizating MgH₂. Otherwise, the phase transformation between Mg₂NiH₄ and Mg₂NiH_0.3 accelerates the re/dehydrogenation reaction of the composite.     

MgCNi3 prepared by powder metallurgy for improved hydrogen storage properties of MgH2

With the depletion of global energies resources, improvement of hydrogen storage properties of materials like MgH₂ is of great interest for future efficient renewable resources. In this study, a novel antiperovskite MgCNi₃ was synthesized by powder metallurgy then introduced into Mg to fabricate MgMgCNi₃ composite. The hydrogen storage properties of the obtained MgMgCNi₃ composite were evaluated. MgMgCNi₃ showed a high capacity of hydrogen storage and fast kinetics of hydrogen uptake/release at relatively low temperatures. About 4.42 wt% H₂ was absorbed within 20 min at 423 K, and 4.81 wt% H₂ was reversibly released within 20 min at 593 K. By comparison, milled MgH₂ absorbed only 0.99 wt% H₂ and hardly underwent any hydrogen evolution under the same conditions. In addition, MgMgCNi₃ composite showed outstanding cycling stability, with hydrogen absorption capacity retention rates reaching 98% after ten cycles at 623 K. The characterization analyses revealed that MgCNi₃ and Mg formed Mg₂NiH₄ hydride and carbonaceous material during hydrogenation, where Mg₂NiH₄ induced dehydrogenation of MgH₂ and carbon played a dispersive role during the composite reaction. Both features synergistically benefited the hydrogen storage properties of MgH₂.     

Improved hydrogen storage properties of Mg/MgH2 thanks to the addition of nickel hydride complex precursors

In order to improve the hydrogenation/dehydrogenation properties of the Mg/MgH₂ system, the nickel hydride complex NiHCl(P(C₆H₁₁)₃)₂ has been added in different amounts to MgH₂ by planetary ball milling. The hydrogen storage properties of the formed composites were studied by different thermal analyses methods (temperature programmed desorption, calorimetric and pressure-composition-temperature analyses). The optimal amount of the nickel complex precursor was found to be of 20 wt%. It allows to homogeneously disperse 1.8 wt% of nickel active species at the surface of the Mg/MgH₂ particles. After the decomposition of the complex during MgH₂ dehydrogenation, the formed composite is stable upon cycling at low temperature. It can release hydrogen at 200 °C and absorb 6.3 wt% of H₂ at 100 °C in less than 1 h. The significantly enhanced H₂ storage properties are due to the impact of the highly dispersed nickel on both the kinetics and thermodynamics of the Mg/MgH₂ system. The hydrogenation and dehydrogenation enthalpies were found to be of −65 and 63 kJ/mol H₂ respectively (±75 kJ/mol H₂ for pure Mg/MgH₂) and the calculated apparent activation energies of the hydrogen uptake and release processes are of 22 and 127 kJ/mol H₂ respectively (88 and 176 kJ/mol H₂ for pure Mg/MgH₂). The change in the thermodynamics observed in the formed composite is likely to be due to the formation of a Mg_0.992Ni_0.008 phase during dehydrogenation/hydrogenation cycling. The impact of another hydride nickel precursor in which chloride has been replaced by a borohydride ligand, namely NiH(BH₄)(P(C₆H₁₁)₃)₂, is also reported.     

Hydrogen storage properties of nano-structured 0.65MgH2/0.35ScH2

The intermetallic compound Mg_0.65Sc_0.35 was found to form a nano-structured metal hydride composite system after a (de)hydrogenation cycle at temperatures up to 350 °C. Upon dehydrogenation phase separation occurred forming Mg-rich and Sc-rich hydride phases that were clearly observed by SEM and TEM with the Sc-rich hydride phase distributed within Mg/MgH₂-rich phase as nano-clusters ranging in size from 40 to 100 nm. The intermetallic compound Mg_0.65Sc_0.35 showed good hydrogen uptake, ca. 6.4 wt.%, in the first charging cycle at 150 °C and in the following (de)hydrogenation cycles, a reversible hydrogen capacity (up to 4.3 wt.%) was achieved. Compared to the as-received MgH₂, the composite had faster cycling kinetics with a significant reduction in activation energy E_a from 159 ± 1 kJ mol⁻¹ to 82 ± 1 kJ mol⁻¹ (as determined from a Kissinger plot). Two-dehydrogenation events were observed by DSC and pressure–composition-isotherm (PCI) measurements, with the main dehydrogenation event being attributed to the Mg-rich hydride phase. Furthermore, after the initial two cycles the hydrogen storage capacity remained unchanged over the next 55 (de)hydrogenation cycles.     

Superior hydrogen storage properties of MgH2–10 wt.% TiC composite

The hydrogen storage performance of MgH₂–10 wt.% TiC composite was investigated. The additive TiC nanoparticle led to a pronounced improvement in the de/hydrogenation kinetics of MgH₂. The composite could dehydrogenate 6.3 wt.% at 573 K while the milled MgH₂ only released 4.9 wt.% of hydrogen at the same condition. The improvement came from that the activation energy of dehydrogenation was decreased from 191.27 kJ mol⁻¹ to 144.62 kJ mol⁻¹ with the TiC additive. The MgH₂–10 wt.% TiC composite also absorbed 6.01 wt.% (or 5.1 wt.%) of hydrogen under 1 MPa H₂ at 573 K (or 473 K) in 3000 s. Even at 1 MPa H₂ and 373 K, it could absorb 4.1 wt.% of hydrogen, but milled MgH₂ could not absorb hydrogen at this condition. Additionally, the composite had good cycling stability, and its hydrogen capacity only decreased 3.3% of the first run after 10 de/hydrogenation cycles. The improved hydrogen storage properties were explained to the TiC particles embedded in the MgH₂, which provided the pathways for the hydrogen diffusion into the MgH₂–10 wt.% TiC composite.     

Hydrogen generation kinetics via hydrolysis of Mg2Ni and Mg2NiH4 powders

In this work, we produce Mg₂NiH₄ powder after hydrogenation of Mg₂Ni and employ them for hydrogen generation via hydrolysis reaction in different type of solutions. The analysis of Mg₂NiH₄ powder reveals surface changes after hydrogenation process which induces the occurrence of cracks and alterations of chemical bonds. The extremely intense hydrogen kinetics is observed using acidic solution, with hydrogen generation rate of approx. 600 ml g⁻¹·min⁻¹ in the first reaction minute. The activation energy for the hydrolysis of Mg₂NiH₄ is calculated to be 29.45 kJ mol⁻¹. An ageing experiment, which includes Mg₂NiH₄ powder stored for two months, discloses almost identical hydrogen generation volume as as-received Mg₂NiH₄ powder. Furthermore, the hydrolysis reaction between Mg₂NiH₄ and acidic solution is applied for electricity production via PEM fuel cell, which shows the maximum voltage generation of 1.28 V for more than 400 s with the external resistance of 200 Ω.     

Study on catalytic effect and mechanism of MOF (MOF = ZIF-8, ZIF-67, MOF-74) on hydrogen storage properties of magnesium

Using a deposition-reduction method, Mg/MOF nanocomposites were prepared as composites of Mg and metal-organic framework materials (MOFs = ZIF-8, ZIF-67 and MOF-74). The addition of MOFs can enhance the hydrogen storage properties of Mg. For example, within 5000 s, 0.6 wt%, 1.2 wt%, 2.7 wt%, 3.7 wt% of hydrogen were released from Mg, Mg/MOF-74, Mg/ZIF-8, Mg/ZIF-67, respectively. Activation energy values of 198.9 kJ mol⁻¹ H₂, 161.7 kJ mol⁻¹ H₂, 192.1 kJ mol⁻¹ H₂ were determined for the Mg/ZIF-8, Mg/ZIF-67, Mg/MOF-74 hydrides, which are 6 kJ mol⁻¹ H₂, 43.2 kJ mol⁻¹ H₂, and 12.8 kJ mol⁻¹ H₂ lower than that of Mg hydride, respectively. Moreover, the cyclic stability characterizing Mg hydride was significantly improved when adding ZIF-67. The hydrogen storage capacity of the Mg/ZIF-67 nanocomposite remained unchanged, even after 100 cycles of hydrogenation/dehydrogenation. This excellent cyclic stability may have resulted from the core-shell structure of the Mg/ZIF-67 nanocomposite.     

Facilitating de/hydrogenation by long-period stacking ordered structure in Mg based alloys

We propose a simple strategy to effectively improve the hydrogenation and dehydrogenation kinetics of Mg based hydrogen storage alloys. We designed and prepared an Mg_91.9Ni_4.3Y_3.8 alloy consisting of a large quantity of long-period stacking ordered (LPSO) phases. A type of highly dispersed multiphase nanostructure, which can markedly promote the de/hydrogenation kinetics, has been obtained utilizing the decomposition of LPSO phases at first a few of hydrogenation reactions. The fine structures of LPSO phases and the microstructural evolutions of the alloy during hydrogenation and dehydrogenation reactions were in detail characterized by means of transmission electron microscopy (TEM). The LPSO phases transformed to MgH₂, Mg₂NiH₄, and YH₃ after the first hydrogenation. The highly dispersed nanostructure at macro and micro (nano) scale range remains even after several de/hydrogenation cycles. The alloy shows excellent hydrogen storage properties and its reversible hydrogen absorption/desorption capacities are about 5.8 wt% at 300 °C. Particularly, the alloy exhibits very fast dehydrogenation kinetics. The dehydrogenated sample can release approximately 5 wt% hydrogen at 300 °C within 200 s and 5.5 wt% within 600 s. We elucidate the structural mechanism of the alloy with outstanding hydrogen storage performance.     

Fluorographene nanosheets enhanced hydrogen absorption and desorption performances of magnesium hydride

Fluorographene (FG), which inherits the properties of graphene and fluorographite (FGi), was successfully fabricated through a simple sonochemical exfoliation route in N-methyl-2-pyrrolidone (NMP) and then MgH₂-FG composite was prepared by ball milling. The dehydrogenation and rehydrogenation performances of MgH₂-FG composite were investigated systematically comparing with as-received MgH₂ and MgH₂-G composite. It is found that the as-prepared FG exhibited a significant catalytic effect on the dehydrogenation and rehydrogenation properties of MgH₂. The MgH₂-FG composite can uptake 6.0 wt% H₂ in 5 min and release 5.9 wt% H₂ within 50 min at 300 °C, while the as-received MgH₂ uptakes only 2.0 wt% H₂ in 60 min and hardly releases hydrogen at the same condition. The hydrogen storage cycling kinetics in the first 10 cycles remains almost the same, indicating the excellent reversibility of the MgH₂-FG composite. SEM analysis shows that the particle size of MgH₂-FG composite was ∼200 nm, much smaller than that of as-received MgH₂ (∼20 μm). TEM observations show that MgH₂ particles were embedded in FG layers during ball milling. The dehydrogenation apparent activation energy for the MgH₂ is reduced from 186.3 kJ mol⁻¹ (as-received MgH₂) to 156.2 kJ mol⁻¹ (MgH₂-FG composite). The catalytic mechanism has been proposed that F atoms in FG serve as charge-transfer sites and accelerate the rate of hydrogen incorporation and dissociation, consequently enhance the dehydrogenation and rehydrogenation properties of MgH₂-FG composite. Furthermore, the FG can inhibit the sintering and agglomeration of MgH₂ particle, thus it improves the cycling dehydrogenation and rehydrogenation of MgH₂-FG composite.     

Microstructural characteristics and hydrogen storage properties of the Mg–Ni–TiS2 nanocomposite prepared by a solution-based method

Magnesium hydride is considered as a promising solid-state hydrogen storage material due to its high hydrogen capacity. How to improve hydrogen desorption kinetics of MgH₂ is one of key issues for its practical applications. In this study, we synthesize a Mg–Ni–TiS₂ composite through a solution-based synthetic strategy. In the as-prepared composite, the co-precipitated Mg and Ni nanoparticles are highly dispersed on TiS₂ nanosheets. As a result, the activation energy for hydrogen desorption decreases to 79.4 kJ mol⁻¹. Meanwhile, the capacity retention rate is kept at the level of 98% and only slight kinetic deterioration is caused after fifty hydrogenation-dehydrogenation cycles. Further investigation indicates that the superior hydrogen desorption kinetics is attributed to the synergistically catalytic effect of the in situ formed Mg₂NiH₄ and TiH₂, and the remained TiS₂. The excellent cycle stability is related not only to the inhibition effect of the secondary phases on powder agglomeration and crystallite growth of Mg and MgH₂ but also to the prevention effect of MgS and TiS₂ on redistribution of catalytic Mg₂NiH₄ and TiH₂ nanoparticles during cycling. This work introduces a feasible approach to develop Mg-based hydrogen storage materials.     

New mechanism and improved kinetics of hydrogen absorption and desorption of Mg(In) solid solution alloy milling with CeF3

This paper presents improving the hydrogen absorption and desorption of Mg(In) solid solution alloy through doped with CeF₃. A nanocomposite of Mg_0.95In_0.05-5 wt% CeF₃ was prepared by mechanical ball milling. The microstructures were systematically investigated by X-ray diffraction, scanning electron microscopy, scanning transmission electron microscopy. And the hydrogen storage properties were evaluated by isothermal hydrogen absorption and desorption, and pressure-composition-isothermal measurements in a temperature range of 230 °C–320 °C. The mechanism of hydrogen absorption and desorption of Mg_0.95In_0.05 solid solution is changed by the addition of CeF₃. Mg_0.95In_0.05-5 wt% CeF₃ nanocomposite transforms to MgH₂, MgF₂ and intermetallic compounds of MgIn and CeIn₃ by hydrogenation. Upon dehydrogenation, MgH₂ reacts with the intermetallic compounds of MgIn and CeIn₃ forming a pseudo-ternary Mg(In, Ce) solid solution, which is a fully reversible reaction with a reversible hydrogen capacity～4.0 wt%. The symbiotic nanostructured CeIn₃ impedes the agglomeration of MgIn compound, thus improving the dispersibility of element In, and finally improving the reversibility of hydrogen absorption and desorption of Mg(In) solution alloy. For Mg_0.95In_0.05-5 wt% CeF₃ nanocomposite, the dehydriding enthalpy is reduced to about 66.1 ± 3.2 kJ⋅mol⁻¹⋅H₂, and the apparent activation energy of dehydrogenation is significantly lowered to 71.9 ± 10.0 kJ⋅mol⁻¹⋅H₂, a reduction of ～73 kJ⋅mol⁻¹⋅H₂ relative to that for Mg_0.95In_0.05 solid solution. As a result, Mg_0.95In_0.05-5 wt% CeF₃ nanocomposite can release ～57% H₂ in 10 min at 260 °C. The improvements of hydrogen absorption and desorption properties are mainly attributed to the reversible phase transition of Mg(In, Ce) solid solution combing with the multiphase nanostructure.     

Enhanced hydrogen desorption kinetics and cycle durability of amorphous TiMgVNi3-doped MgH2

MgH₂ is considered as a promising hydrogen storage material for on-board applications. In order to improve hydrogen storage properties of MgH₂, the amorphous TiMgVNi₃-doped MgH₂ is prepared by ball milling under hydrogen atmosphere. It is found that the catalytic (Ti,V)H₂ and Mg₂NiH₄ nanoparticles are in situ formed after activation. As a result, the amorphous TiMgVNi₃-doped MgH₂ exhibits enhanced dehydrogenation kinetics (the activation energy for hydrogen desorption is 94.4 kJ mol^?1 H₂) and superior cycle durability (the capacity retention rate is up to 92% after 50 cycles). These results demonstrate that the in situ formation of highly dispersed catalytic nanoparticles from an amorphous phase is an effective pathway to enhance hydrogen storage properties of MgH₂.     

Precipitation of nanocrystalline LaH3 and Mg2Ni and its effect on de-/hydrogenation thermodynamics of Mg-rich alloys

Based on the catalytic effects of transition metals and rare earth metals on magnesium hydride, precipitation behavior of nanocrystalline LaH₃ and Mg₂Ni has been discussed and correlated with the de-/hydrogenation thermodynamic of Mg-rich alloys in this work. The results show that a significant enhancement of de-/hydrogenation properties has been achieved due to in-situ formed Mg–Mg₂Ni–LaH₃ nanocomposites. It is observed that the Mg₂Ni-rich alloy exhibiting superior performance can desorb about 5.7 wt% hydrogen within 2.5 min at 623 K. The formation of LaH₃ tends to promote the hydrogenation process and the Mg₂Ni is beneficial for improving the dehydrogenation performance. Meanwhile, the phase boundaries between LaH₃, Mg₂Ni and Mg also play positive roles due to stored extra energy on the interface. Fitting kinetics model shows that rate-limiting steps of the as-prepared alloys have changed and the desorption activation energy significantly decreases due to precipitation of nanocrystalline LaH₃ and Mg₂Ni. It is worth noting that desorption activation energy of the preferable composite decreases to 94.03 kJ mol⁻¹. Thermodynamic properties are also investigated and analyzed based on plateau pressure and van't Hoff equation. It is revealed that precipitation of nanocrystalline LaH₃ and Mg₂Ni significantly enhances the hydrogen storage kinetics of Mg-based alloys.     

Hydrogenation of Pd/Mg films: A quantitative assessment of transport coefficients

Due to increasing energy demands, interest in hydrogen storage is substantial. Magnesium is one of the most attractive systems, yet, development for practical application remains challenging. By combination of X-ray diffraction, electron microscopy and in-situ measurements of resistivity we determine the diffusion coefficient of hydrogen in MgH₂ at technically relevant pressure (20 bar). Pd coated thin films of well-defined thickness enable a quantitative evaluation of the hydrogenation rate. From this, we detect linear to parabolic kinetic transition and obtain the diffusion coefficient of hydrogen in MgH₂. Measurements at different temperatures (RT-300 °C) demonstrate an Arrhenius behaviour with an activation energy E_a = 28.1 kJ mol⁻¹. This low value and the transformation into a nanocrystalline microstructure upon hydrogenation indicate grain boundary diffusion as the essential mechanism. In completion, the interface Pd/Mg is studied. Mg₅Pd₂ and Mg₆Pd form at elevated temperatures required for dehydrogenation. These phases affect, but do not prevent, further hydrogen loading.