共查询到20条相似文献,搜索用时 31 毫秒
1.
《International Journal of Hydrogen Energy》2020,45(16):10017-10029
We report an effective and facile approach to enhance the dimensional and chemical stability of sulfonated poly(ether ether ketone) (SPEEK) type proton exchange membranes through simple polymer blending for fuel cell applications, using commercial available materials. The polymeric blends with sulfonated poly(aryl ether sulfone)s (SPAES) were simply fabricated by a three-component system, which contained SPEEK (10–50 wt%, 1.83 mmol/g), and SPAES-40 (1.72 mmol/g)/SPAES-50 (2.04 mmol/g) at 1:1 in weight. The SPAES-40 was selected for mechanical and dimensional stability reinforcing, while SPAES-50 for the good polymer compatibility. The obtained SPEEK/SPAES blend membranes showed depressed water uptake, better dimensional and oxidative stability, together with higher proton conductivity beyond 70 °C than the pristine SPEEK membrane. The apparent improvements in membrane properties were associated with the homogeneous dispersion of SPEEK and both SPAES copolymers inside the membranes as well as the rearrangements of the polymeric chains. The SPEEK content should be properly controlled in the range of 10–40% (B10 to B40). In a H2/O2 fuel cell test, B30 showed a maximum power density of 700 mW/cm2, which was 1.6 times as high as that of B40 at 80 °C under 100% RH. The further cross-linking treatment produced more ductile and enduring blend membranes, indicating an appreciable prospective for fuel cell applications. 相似文献
2.
Alphonse Haragirimana Na Li Zhaoxia Hu Shouwen Chen 《International Journal of Hydrogen Energy》2021,46(29):15866-15877
The development of hydrocarbon polymer electrolyte membranes with high proton conductivities and good stability as alternatives to perfluorosulfonic acid membranes is an ongoing research effort. A facile and effective thermal crosslinking method was carried out on the blended sulfonated poly (ether ether ketone)/poly (aryl ether sulfone) (SPEEK/SPAES) system. Two SPEEK polymers with ion exchange capacities (IECs) of 1.6 and 2.0 mmol g?1 and one SPAES polymer (2.0 mmol g?1) were selected to create different blends. The effect of thermal crosslinking on the fundamental properties of the membranes, especially their physicochemical stability and electrochemical performance, were investigated in detail. The homogeneous and flexible thermally-crosslinked SPEEK/SPAES membranes displayed excellent mechanical toughness (27–46 Mpa), suitable water uptake (<60%), high dimensional stability (swelling ratio < 15%) and large proton conductivity (>120 mS cm?1) at 80 °C. The thermal crosslinking membranes also show significantly enhanced hydrolytic (<2.5%) and oxidative stability (<2%). Fuel cell with t-SPEEK/SPAES (1:2:2) membrane achieves a power density of 665 mW cm?2 at 80 °C. 相似文献
3.
《International Journal of Hydrogen Energy》2020,45(54):29883-29891
A novel proton exchange membrane was synthesized by embedding a crystalline which was nano-assembled through trimesic acid and melamine (TMA·M) into the matrix of the sulfonated poly (ether ether ketone) (SPEEK) to enhance the proton conductivity of the SPEEK membrane. Fourier transform infrared indicated that hydrogen bonds existed between SPEEK and TMA·M. XRD and SEM indicated that TMA·M was uniformly distributed within the matrix of SPEEK, and no phase separation occurred. Thermogravimetric analysis showed that this membrane could be applied as high temperature proton exchange membrane until 250 °C. The dimensional stability and mechanical properties of the composite membranes showed that the performance of the composite membranes is superior to that of the pristine SPEEK. Since TMA·M had a highly ordered nanostructure, and contained lots of hydrogen bonds and water molecules, the proton conductivity of the SPEEK/TMA·M-20% reached 0.00513 S cm−1 at 25 °C and relative humidity 100%, which was 3 times more than the pristine SPEEK membrane, and achieved 0.00994 S cm−1 at 120 °C. 相似文献
4.
Na ZhangGang Zhang Dan XuChengji Zhao Wenjia MaHongtao Li Yang ZhangShuai Xu Hao JiangHongcheng Sun Hui Na 《International Journal of Hydrogen Energy》2011,36(17):11025-11033
A series of cross-linked membranes based on SPEEK/Nafion have been prepared to improve methanol resistance and dimension stability of SPEEK membrane for the usage in the direct methanol fuel cells (DMFCs). Sulfonated diamine monomer is synthesized and used as cross-linker to improve the dispersion of Nafion in the composite membranes and decrease the negative effect of cross-linking on proton conductivity of membranes. FT-IR analysis shows that the cross-linking reaction is performed successfully. The effects of different contents of Nafion on the properties of cross-linked membranes are investigated in detail. All the cross-linked membranes show lower methanol permeability and better dimensional stability compared with the pristine SPEEK membrane. SPEEK-N30 with the 30 wt % Nafion shows a methanol permeability of 0.73 × 10−6 cm2 s−1 and a water uptake of 24.4% at 25 °C, which are lower than those of the pristine membrane. Meanwhile, the proton conductivity of SPEEK-N30 still remains at 0.041 S cm−1 at 25 °C, which is comparable to that of the pristine SPEEK membrane. All the results indicate that these cross-linked membranes based on SPEEK/Nafion show good prospect for the use as proton exchange membranes. 相似文献
5.
Deeksha GuptaVeena Choudhary 《International Journal of Hydrogen Energy》2011,36(14):8525-8535
The paper describes the preparation of membranes based on sulfonated poly(ether ether ketone) [SPEEK] [degree of sulfonation ∼65%] in the presence of varying amounts of poly (ethylene glycol) (molecular weight 200) [PEG-200] and cyclohexane dimethanol [CDM] using water:ethanol (50:50) as solvent. After drying, the membranes were heat treated at 60 °C (2 h), 80 °C (2 h), 100 °C (2 h), 120 °C (2 h) and 135 °C for 16 h. After the heat treatment, samples were insoluble in water:ethanol (50:50) mixture. The membranes thus obtained were characterized by FTIR spectroscopy (structural), water uptake (hydrolytic stability), thermal stability (TG), mechanical stability and proton conductivity. A significant increase in the hydrolytic stability was observed, SPEEK became elastic and fragile whereas the heat-treated SPEEK/PEG and SPEEK/CDM remained stable even after 135 days of water immersion at 35 °C. 相似文献
6.
《International Journal of Hydrogen Energy》2021,46(61):31312-31323
Sulfonated poly(ether ether ketone) (SPEEK) membrane with high sulfonation degree (SD) is a promising substitute of Nafion as proton exchange membrane (PEM), due to the excellent proton conductivity and low cost. However, its widespread application is limited by the inferior structural stability. Here, we report the fabrication of high SD SPEEK membrane with outstanding structural stability through an in-situ molecular-level hybridization method. Concretely, the ionic nanophase of SPEEK membrane is filled with precursors, which are then in-situ converted into polymer quantum dots (PQDs) by a microwave-assisted polycondensation process. In this manner, the micro-phase separation structure of SPEEK membrane is well maintained. PQDs with abundant hydrophilic functional groups together with the inherent –SO3H groups impart hybrid membrane highly enhanced proton conductivity of 138.2 mS cm−1 at 80 °C, which is comparable to Nafion. This then offers a 116.3% enhancement in device output power. Meanwhile, PQDs act as cross-linkers via generated electrostatic interactions with SPEEK, affording hybrid membrane with SD of 94.1% an ultralow swelling ratio of 1.35% at 25 °C, about 35 times lower than control membrane. More importantly, the in-situ molecular-level hybridization method is versatile, which can also boost the performances of chitosan (CS)-based membranes. 相似文献
7.
Swee Su Lim Wan Ramli Wan Daud Jamaliah Md Jahim Mostafa Ghasemi Poh She Chong Manal Ismail 《International Journal of Hydrogen Energy》2012
Custom-made proton exchange membranes (PEM) are synthesized by incorporating sulfonated poly(ether ether ketone) (SPEEK) in poly(ether sulfone) (PES) for electricity generation in microbial fuel cells (MFCs). The composite PES/SPEEK membranes at various composition of SPEEK are prepared by the phase inversion method. The membranes are characterized by measuring roughness, proton conductivity, oxygen diffusion, water crossover and electrochemical impedance. The conductivity of hydrophobic PES membrane increases when a small amount (3–5%) of hydrophilic SPEEK is added. The electrochemical impedance spectra shows that the conductivity and capacitance of PES/SPEEK composite membranes during MFC operation are reduced from 6.15 × 10−7 to 6.93 × 10−5 (3197 Ω–162 Ω) and from 3.00 × 10−7 to 1.56 × 10−3 F, respectively when 5% of SPEEK added into PES membrane. The PES/SPEEK 5% membrane has the highest performance compared to other membranes with a maximum power density of 170 mW m−2 at the maximum current density of 340 mA m−2. However, the interfacial reaction between the membrane and the cathode with Pt catalyst indicates moderate reaction efficiency compared to other membranes. The COD removal efficiency of MFCs with composite membrane PES/SPEEK 5% is nearly 26-fold and 2-fold higher than that of MFCs with Nafion 112 and Nafion 117 membranes respectively. The results suggest that the PES/SPEEK composite membrane is a promising alternative to the costly perfluorosulfonate membranes presently used as separators in MFC systems. 相似文献
8.
In the present study, a series of the crosslinked sulfonated poly(ether ether ketone) (SPEEK) proton exchange membranes were prepared. The photochemical crosslinking of the SPEEK membranes was carried out by dissolving benzophenone and triethylamine photo-initiator system in the membrane casting solution and then exposing the resulting membranes after solvent evaporation to UV light. The physical and transport properties of crosslinked membranes were investigated. The membrane performance can be controlled by adjusting the photoirradiation time. The experimental results showed that the crosslinked SPEEK membranes with photoirradiation 10 min had the optimum performance for proton exchange membranes (PEMs). Compared with the non-crosslinked SPEEK membranes, the crosslinked SPEEK membranes with photoirradiation 10 min markedly improved thermal stabilities and mechanical properties as well as hydrolytic and oxidative stabilities, greatly reduced water uptake and methanol diffusion coefficients with only slight sacrifice in proton conductivities. Therefore, the crosslinked SPEEK membranes with photoirradiation 10 min were particularly promising as proton exchange membranes for direct methanol fuel cell (DMFC) applications. 相似文献
9.
Miaomiao HanGang Zhang Mingyu LiShuang Wang Zhongguo LiuHongtao Li Yang ZhangDan Xu Jing WangJing Ni Hui Na 《Journal of power sources》2011,196(23):9916-9923
A diamine-terminated polybenzimidazole oligomer (o-PBI) has been synthesized for introducing the benzimidazole groups (BI) into sulfonated poly(ether ether ketone) (SPEEK) membranes. SPEEK/o-PBI/4,4′-diglycidyl(3,3′,5,5′-tetramethylbiphenyl) epoxy resin (TMBP) composite membranes in situ polymerization has been prepared for the purpose of improving the performance of SPEEK with high ion-exchange capacities (IEC) for the usage in the direct methanol fuel cells (DMFCs). The composite membranes with three-dimensional network structure are obtained through a cross-linking reaction between PBI oligomer and TMBP and the acid-base interaction between sulfonic acid groups and benzimidazole groups. Resulting membranes show a significantly increasing of all of the properties, such as high proton conductivity (0.14 S cm−1 at 80 °C), low methanol permeability (2.38 × 10−8 cm2 s−1), low water uptake (25.66% at 80 °C) and swelling ratio (4.11% at 80 °C), strong thermal and oxidative stability, and mechanical properties. Higher selectivity has been found for the composite membranes in comparison with SPEEK. Therefore, the SPEEK/o-PBI/TMBP composite membranes show a good potential in DMFCs usages. 相似文献
10.
We have prepared composite membranes for fuel cell applications. Cesium salt of tungstophosphoric acid (Cs-TPA) particles was synthesized by aqueous solutions of tungstophosphoric acid and cesium hydroxide and, Cs-TPA particles and sulfonated (polyether ether ketone) (SPEEK) with two sulfonation degrees (DS), 60 and 70%have been used. We examined both the effects of Cs-TPA in SPEEK membranes as functions of sulfonation degrees of SPEEK and the content of Cs-TPA. The performance of the composite membranes was evaluated in terms of water uptake, ion exchange capacity, proton conductivity, chemical stability, hydrolytic stability, thermal stability and methanol permeability. The morphology of the membranes was investigated with SEM micrographs. Increasing sulfonation degree of SPEEK from 60 to 70 caused agglomeration of the Cs-TPA particles. The methanol permeability was reduced to 4.7 × 10−7 cm2/s for SPEEK (DS: 60%)/Cs-TPA membrane with 10 wt.% Cs-TPA concentration, and acceptable proton conductivity of 1.3 × 10−1 S/cm was achieved at 80 °C under 100% RH. The weight loss at 900 °C increased with the addition of inorganic particles, as expected. The hydrolytic stability of the SPEEK/Cs-TPA based composite membranes was improved with the incorporation of the Cs-TPA particles into the matrix. We also noted that SPEEK60/Cs-TPA composite membranes were hydrolytically more stable than SPEEK70/Cs-TPA composite membranes. On the other hand, Methanol, water vapor, and hydrogen permeability values of SPEEK60 composite membranes were found to be lower than that of Nafion®. 相似文献
11.
《Journal of power sources》2006,163(1):2-8
The solid proton conductor zirconium phosphate sulfophenylenphosphonate of composition Zr(HPO4)0.65(SPP)1.35 where SPP denotes metasulfophenylenphosphonate was prepared in the amorphous gel form in dimethyl formamide (DMF) and characterized by 31P NMR. The composite membranes of SPEEK up to 50 wt.% of zirconium phosphate sulfophenylenphosphonate content were prepared by introducing the solid proton conductor from the gel. The composite membranes were characterized using FT-IR, powder X-ray diffraction, SEM, DSC/TGA. The proton conductivity of the membranes was measured under 100% relative humidity up to 70 °C. The composite membranes had better thermal stability when compared with that of SPEEK. A three-fold increase in proton conductivity at 70 °C was observed for the composite membrane with 50 wt.% of solid proton conductor. Furthermore, the conductivity results imply that a critical percentage of proton conductor is needed to establish conduction pathways in the polymer matrix. 相似文献
12.
Haoqin Zhang Chuanming MaJingtao Wang Xuyang WangHuijuan Bai Jindun Liu 《International Journal of Hydrogen Energy》2014
Proton exchange membrane (PEM) with high proton conductivity is crucial to the commercial application of PEM fuel cell. Herein, sulfonated halloysite nanotubes (SHNTs) with tunable sulfonic acid group loading were synthesized and incorporated into sulfonated poly(ether ether ketone) (SPEEK) matrix to prepare nanocomposite membranes. Physicochemical characterization suggests that the well-dispersed SHNTs enhance the thermal and mechanical stabilities of nanocomposite membranes. The results of water uptake, ionic exchange capacity, and proton conductivity corroborate that the embedded SHNTs interconnect the ionic channels in SPEEK matrix and donate more continuous ionic networks. These networks then serve as proton pathways and allow efficient proton transfer with low resistance, affording enhanced proton conductivity. Particularly, incorporating 10% SHNTs affords the membrane a 61% increase in conductivity from 0.0152 to 0.0245 S cm−1. This study may provide new insights into the structure-properties relationships of nanotube-embedded conducting membranes for PEM fuel cell. 相似文献
13.
《International Journal of Hydrogen Energy》2022,47(19):10736-10746
This study demonstrates the successful development of hybrid mesoporous siliceous phosphotungstic acid (mPTA-Si) and sulfonated poly ether ether ketone (SPEEK) as a proton exchange membrane with a high performance in hydrogen proton exchange membrane fuel cells (PEMFC). SPEEK acts as a polymeric membrane matrix and mPTA-Si acts as the mechanical reinforcer and proton conducting enhancer. Interestingly, incorporating mPTA-Si did not affect the morphological aspect of SPEEK as dense membrane upon loading the amount of mPTA-Si up to 2.5 wt%. The water uptake reduced to 14% from 21.5% when mPTA-Si content increases from 0.5 to 2.5 wt% respectively. Meanwhile, the proton conductivity increased to 0.01 Scm?1 with 1.0 wt% mPTA-Si and maximum power density of 180.87 mWcm?2 which is 200% improvement as compared to pristine SPEEK membrane. The systematic study of hybrid SP-mPTA-Si membrane proved a substantial enhancement in the performance together with further improvement on physicochemical properties of parent SPEEK membrane desirable for the PEMFC application. 相似文献
14.
Tiezhu Fu Zhiming Cui Shuangling Zhong Yuhua Shi Chengji Zhao Gang Zhang Ke Shao Hui Na Wei Xing 《Journal of power sources》2008
A new type of sulfonated clay (clay-SO3H) was prepared by the ion exchange method with the sulfanilic acid as the surfactant agent. The grafted amount of sulfanilic acid in clay-SO3H was 51.8 mequiv. (100 g)−1, which was measured by thermogravimetric analysis (TGA). Sulfonated poly(ether ether ketone) (SPEEK)/clay-SO3H hybrid membranes which composed of SPEEK and different weight contents of clay-SO3H, were prepared by a solution casting and evaporation method. For comparison, the SPEEK/clay hybrid membranes were produced with the same method. The performances of hybrid membranes for direct methanol fuel cells (DMFCs) in terms of mechanical and thermal properties, water uptake, water retention, methanol permeability and proton conductivity were investigated. The mechanical and thermal properties of the SPEEK membranes had been improved by introduction of clay and clay-SO3H, obviously. The water desorption coefficients of the SPEEK and hybrid membranes were studied at 80 °C. The results showed that the addition of the inorganic part into SPEEK membrane enhanced the water retention of the membrane. Both methanol permeability and proton conductivity of the hybrid membranes decreased in comparison to the pristine SPEEK membrane. However, it was worth noting that higher selectivity defined as ratio of proton conductivity to methanol permeability of the SPEEK/clay-SO3H-1 hybrid membrane with 1 wt.% clay-SO3H was obtained than that of the pristine SPEEK membrane. These results showed that the SPEEK/clay-SO3H hybrid membrane with 1 wt.% clay-SO3H had potential usage of a proton exchange membrane (PEM) for DMFCs. 相似文献
15.
《International Journal of Hydrogen Energy》2022,47(61):25755-25768
The poly(ether ether ketone) (PEEK) was prepared as organic matrix. ZIF-8 and GO/ZIF-8 were used as fillers. A series of novel new anion exchange membranes (AEMs) were fabricated with imidazole functionalized PEEK and GO/ZIF-8. The structure of ZIF-8, GO/ZIF-8 and polymers are verified by 1H NMR, FT-IR and SEM. This series of hybrid membranes showed good thermal stability, mechanical properties and alkaline stability. The ionic conductivities of hybrid membranes are in the range of 39.38 mS cm?1–43.64 mS cm?1 at 30 °C, 100% RH and 59.21 mS cm?1–86.87 mS cm?1 at 80 °C, 100% RH, respectively. Im-PEEK/GO/ZIF-8-1% which means the mass percent of GO/ZIF-8 compound in Im-PEEK polymers is 1%, showed the higher ionic conductivity of 86.87 mS cm?1 at 80 °C and tensile strength (38.21 MPa) than that of pure membrane (59.21 mS cm?1 at 80 °C and 19.47 MPa). After alkaline treatment (in 2 M NaOH solution at 60 °C for 400 h), the ionic conductivity of Im-PEEK/GO/ZIF-8-1% could also maintain 92.01% of the original ionic conductivity. The results show that hybrid membranes possess the ability to coordinate trade-off effect between ionic conductivity and alkaline stability of anion exchange membranes. The excellent performances make this series of hybrid membranes become good candidate for application as AEMs in fuel cells. 相似文献
16.
Hongtao Li Gang ZhangWenjia Ma Chengji ZhaoYang Zhang Miaomiao HanJing Zhu Zhongguo LiuJing Wu Hui Na 《International Journal of Hydrogen Energy》2010
Poly(ether ether ketone) (PEEK) and sulfonated poly(ether ether ketone) (SPEEK, IEC = 2.07 mequiv.g−1) have been synthesized via nucleophilic aromatic substitution reaction. Bromomethylated poly(ether ether ketone) (PEEK-Br) is then prepared and reacted with 2-benzimidazolethiol to obtain the benzimidazole grafted poly(ether ether ketone) (PEEK-BI). The structures of PEEK-Br and PEEK-BI are characterized by 1H NMR spectra. Composite membranes based on SPEEK and PEEK-BI are prepared and their properties used for fuel cells are studied in detail. The results show that the composite membranes exhibit greatly improved mechanical properties as well as reduced water uptake and methanol permeability compared with the pristine SPEEK membrane. The increased oxidative stability and selectivity indicate that the composite membranes are promising to be used as proton exchange membranes. 相似文献
17.
《International Journal of Hydrogen Energy》2019,44(5):3099-3114
Nanocomposite membranes based on sulfonated poly (ether ether ketone) (SPEEK) and sulfonated core-shell TiO2 nanoparticles were prepared. TiO2 nanoparticles were sulfonated by redox polymerization method by using sodium styrene sulfonate (SSA) and 2-acrylamido-2-methyl-1-propane sulfonic acid (AMPS) monomers. The resultant hybrid nanoparticles (PAMPS-gTiO2 and PSSA-g-TiO2) were introduced to SPEEK with a sulfonation degree of 68%. Grafting of sulfonated polymers onto TiO2 nanoparticles enhanced the content of proton transport sites in the membrane, leading to an increase in proton conductivity and power density. Besides, the mechanical and dimensional stabilities of the nanocomposite membranes were also improved compared with pure SPEEK membrane. The maximum power density for membranes containing 7.5 wt% of PAMPS-gTiO2 and PSSA-g-TiO2 nanoparticles at 80 °C obtained 283 mW cm−2 and 245 mW cm−2, respectively. 相似文献
18.
Cuicui Dong Qian Wang Chuanbo Cong Xiaoyu Meng Qiong Zhou 《International Journal of Hydrogen Energy》2017,42(15):10317-10328
In the present study, novel composite membranes were prepared based on sulfonated poly (ether ether ketone)/phosphotungstic acid/carbon nitride nanosheets (SPEEK/HPW/g-C3N4). The alkaline ultrathin g-C3N4 nanosheets in the membranes behaved like “double-sided adhesive”, forming hydrogen bonds with the HPW molecules to anchor hydrophilic HPW without leaking. Moreover, the amine groups of nanosheets formed acid–base pairs with –SO3H of the SPEEK polymer matrix, facilitating the Grotthuss-type transport of proton to improve conductivity. The g-C3N4 inorganic particles provided tortuous pathways for methanol transport to suppress the methanol permeability coefficient. The selectivity of the SPEEK/HPW/g-C3N4-1.0 was 2.3 times higher than that of SPEEK/HPW and 1.5 times higher than that of pristine SPEEK. SPEEK/HPW/g-C3N4 hybrid membranes exhibited stable and durable operation for 240 h under 100% RH at 60 °C. Moreover, membranes exhibited superior mechanical property, with maximum elongation at break of 223.3%. 相似文献
19.
Se-Hee Lee Seong-Ho Choi Sai-Anand Gopalan Kwang-Pill Lee Gopalan Anantha-Iyengar 《International Journal of Hydrogen Energy》2014
In this work, a combination of constituent materials capable of improving the moisture retention and proton conductivity (PC) was incorporated into sulfonated poly (ether ether ketone) (SPEEK) membranes in order to prepare new, self-humidifying composite membranes (SHMs) for proton exchange membrane fuel cells. The property-improving components were incorporated into the cast SPEEK film in an appropriate microstructural architecture to prepare the SHMs with increased water retention and PC. SHMs were therefore prepared with the inclusion of carboxyl-functionalized graphene (G(c)) and phosphotungstic acid (PWA) with varying proportions into the SPEEK film. The structure of the SPEEK/G(c)/PWA composite membranes was characterized by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, energy dispersive X-ray analysis, thermogravimetric analysis and X-ray photoelectron spectroscopy. The physicochemical properties of the composite membranes, such as ion exchange capacity, water uptake, thermal stability and PC, were investigated. This work provides confirmation that self-humidifying properties are improved at temperature above 60 °C through a combinational inclusion of G(c) and PWA within SPEEK and the new self-humidifying membranes have potential for use in medium temperature direct methanol fuel cells. 相似文献
20.
Ye Li Min XieXitao Wang Danming ChaoXincai Liu Ce Wang 《International Journal of Hydrogen Energy》2013
In this article, novel branched sulfonated poly(ether ether ketone)s (Br-SPEEK) containing various amounts of 1,3,5-tris(4-fluorobenzoyl)benzene as the branching agent have been successfully prepared. Compared with the traditional linear polymer membranes, the membranes prepared by Br-SPEEK showed improved mechanical strength, excellent dimensional stability and superior oxidative stability with similar proton conductivity. Notably, the Br-SPEEK-10 membrane began to break after 267 min in Fenton's reagent at 80 °C, which was 4 times longer than that of the L-SPEEK. Although the proton conductivity decreased with the addition of the branching agent, satisfying methanol permeability value was observed (down to 6.3 × 10−7 cm2 s−1), which was much lower than Nafion 117 (15.5 × 10−7 cm2 s−1). All the results indicated that the novel branched sulfonated poly(ether ether ketone)s membrane was potential candidate as proton conductive membranes for application in fuel cells. 相似文献