Hollow NH2-MIL-101@TA derived electrocatalyst for enhanced oxygen reduction reaction and oxygen evolution reaction

Non-precious metal-based electrocatalysts with excellent activity and stability are highly desired for the sluggish oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Herein, a tannic acid (TA) etching strategy is used to inhibit the metal aggregation and achieve muti-metal doping. The hollow NH₂-MIL-101@TA derived Fe–N–C catalyst exhibits superior ORR catalytic activity with an E_1/2 of 0.872 V and a maximum output power density of 123.4 mW cm⁻² in Zn-air battery. Since TA can easily chelate with metal ions, Fe/Co–N–C and Fe/Ni–N–C are also synthesized. Fe/Ni–N–C manifests exceptional bifunctional activity with an E_j = 10 of 1.67 V and a potential gap of 0.833 V between E_j = 10 and E_1/2 in alkaline electrolyte, which is 45 mV smaller than Pt/C–IrO₂. The improvement of ORR and OER performance of the catalysts via the simple TA etching and chelation method provides a novel strategy for the design and synthesis of efficient electrocatalysts.     

MOF-derived multi-metal embedded N-doped carbon sheets rich in CNTs as efficient bifunctional oxygen electrocatalysts for rechargeable ZABs

The rational design and preparation of bifunctional electrocatalysts with pleasant oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) performance is crucial for extensive commercial applications of rechargeable Zn–air batteries (ZABs). Herein, we report a simple method to obtain multi-metal (Fe, Ni, Zn) embedded in N-doped carbon sheets entangled with carbon nanotubes (CNTs) as superior oxygen electrocatalysts (FeNi-NCS-2). The resultant FeNi-NCS-2 exhibits an impressive electrochemical performance, providing a reversible oxygen overpotential as low as 0.758 V. The ZAB with FeNi-NCS-2 as the air cathode shows a promising capacity of 639.71 mAh g^?1 at 20 mA cm^?2, a power density of 109.8 mW cm^?2 and cycling stability of over 130 cycles at 10 mA cm^?2 with an energy efficiency of about 55%, superior to the ZAB based on Pt/C–IrO₂. The satisfactory electrocatalytic performance is mainly due to the Fe, Ni-based nanoparticles protected by graphitic carbon layers, hierarchical porous lamellar structures that promote the accessibility between the active centers and the electrolyte as well as self-growing tangled carbon nanotubes that provide fast transmission channels. This study presents a facile way for the synthesis of highly efficient ORR/OER bifunctional electrocatalysts for high-performance rechargeable ZABs.     

Atomically dispersed Co atoms in nitrogen-doped carbon aerogel for efficient and durable oxygen reduction reaction

Developing non-noble-metal-based electrocatalysts as alternatives to replace Pt-based catalysts for oxygen reduction reaction (ORR) is crucial for large scale industrial application of fuel cells. Herein, we report a facile method to synthesize atomically dispersed Co atoms anchored on nitrogen-doped carbon aerogels with a 3D hierarchically porous network structure via F127-assisted pyrolysis of a phenolic resin/Co²⁺ composite and subsequent HCl etching treatment. HRTEM, AC-STEM, XRD, XPS, and Raman spectroscopy measurements demonstrate that Co atoms are homogeneously atomically dispersed on nitrogen-doped carbon aerogels within the porous structure by coordination with pyridinic-N. Among a series of samples, the Co-NCA@F127-1: 0.56 catalyst exhibits an enhanced ORR activity with onset potential (E_onset) of 0.935 V vs. RHE, the high diffusion limiting current density of 5.96 mA cm⁻² at 0.45 V, as well as an excellent resistance to methanol poisoning and good long-term stability in alkaline medium, comparable to the state-of-the-art Pt/C catalyst. This work may provide a novel and ingenious thought in the design and engineering of efficient and robust electrocatalysts based on single transition-metal atoms supported by nitrogen-doped carbon materials.     

Tunable Fe/N co-doped 3D porous graphene with high density Fe-Nx sites as the efficient bifunctional oxygen electrocatalyst for Zn-air batteries

Nitrogen-doped transition metal materials display promising potential as bifunctional electrocatalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Herein, Fe/N co-doped three-dimensional (3D) porous graphene (FeN-3D-PG) is prepared via a template method using sodium alginate as the carbon source and low polymerization degree melamine resin as the nitrogen source. The low polymerization degree melamine resin can form complexes with Fe³⁺ in the aqueous solution and further forms high density Fe-N_x active sites during pyrolysis. Meanwhile, the formed 3D porous structure efficiently promotes the uniform distribution of Fe-N_x active sites. The FeN-3D-PG catalyst exhibits pH-independent ORR activity. For OER, the catalyst possesses a low over potential (370 mV at 10 mA cm⁻²) in alkaline electrolyte. The Zn-air batteries (ZABs) using FeN-3D-PG as cathode exhibits a power density up to 212 mW cm⁻², a high specific capacity of 651 mAh g⁻¹, and the charge-discharge stability of 80 h. This work provides new sight to transition metal materials based ZABs with excellent performance.     

Co-based MOF-derived Co/CoN/Co2P ternary composite embedded in N- and P-doped carbon as bifunctional nanocatalysts for efficient overall water splitting

In this work, we developed ternary metallic cobalt-cobalt nitride-dicobalt phosphide composite embedded in nitrogen and phosphorus co-doped carbon (Co/CoN/Co₂P-NPC) as bifunctional catalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). The as-prepared Co/CoN/Co₂P-NPC is achieved by simultaneous annealing and phosphating of a Co–N rich metal-organic frameworks (MOFs) precursor. Compare with the phosphorus-free Co/CoN embedded nitrogen-doped carbon electrocatalyst (Co/CoN-NC), the as-prepared Co/CoN/Co₂P-NPC display superior HER and OER low overpotential of 99 mV and 272 mV at current density of 10 mA cm⁻². When Co/CoN/Co₂P-NPC electrocatalyst is use as bifunctional catalysts in overall alkaline water splitting, it exhibit excellent behaviour with 10 mA cm⁻² current at overall cell potential of 1.60 V. The excellent performance of Co/CoN/Co₂P-NPC electrocatalyst is attributed to the phosphating process that could further enhance synergistic effect, create stronger electronic interactions, and form efficient dual heteroatom doping to optimize the interfacial adhesion within the electrocatalyst. This present work will create more opportunities for the development of new, promising and more active sites electrocatalysts for alkaline electrolysis.     

Open and porous NiS2 nanowrinkles grown on non-stoichiometric MoOx nanorods for high-performance alkaline water electrolysis and supercapacitor

Hierarchical hybrid heterostructures are regarded to be promising materials for highly efficient bifunctional electrocatalysts and high-performance supercapacitors due to their intriguing morphological features and remarkable electrochemical properties. Herein, we demonstrate the rational construct of cost-effective MoO_x@NiS₂ hybrid nanostructures as bifunctional electrocatalysts and the electrode material of supercapacitor. Microstructural analysis shows that the hybrid is a kind of hierarchical heterostructure composed of open and porous NiS₂ nanowrinkles in situ grown on non-stoichiometric MoO_x nanorods, which greatly improves the conductivity, and effectively maximized the electrochemical surface area. As expected, the MoO_x@NiS₂ hybrid show remarkable electrocatalytic performance in alkaline media, such as overpotentials of 101 mV at 10 mA cm^?2 for hydrogen evolution reaction (HER) and 278 mV at 20 mA cm^?2 for oxygen evolution reaction (OER), and a low cell voltage of 1.62 V to deliver a current density of 10 mA cm^?2. Moreover, the hybrid nanostructures present a high specific capacitance 1050 A/g at 1 A/g with ultra-long stability in 6 M KOH. The strategy proposed here introduces a new perspective about the development of efficient earth-abundant bifunctional elecrocatalysts and electrode materials for superior energy conversion and storage devices.     

Enriched oxygen vacancy promoted heteroatoms (B,P, N,and S) doped CeO2: Challenging electrocatalysts for oxygen evolution reaction (OER) in alkaline medium

Increasing worldwide energy consumption has prompted considerable study into energy generation and energy storage systems in recent years. Chemical fuels may be produced efficiently via electrocatalytic water splitting, which uses electric and solar power. The development of efficient anodic electrocatalysts for efficient oxygen evolution reaction (OER) is a greater concern of present energy research. Cerium oxide (CeO₂) are promising electrocatalysts that exhibit outstanding OER but their reduced stability obstructs the practical application. A novel strategy was established to construct an effective catalyst of heteroatom (N, B, P and S) doped CeO₂ matrix were prepared. Moreover, the doping of heteroatoms into the CeO₂ matrix processes the improved electronic conductivity, reactive sites, increases the electrochemical catalytic activity, which enhances the water oxidation reaction. Consequently, well-suited alkaline electrolysers were brought together for water oxidation to ideal OER electrocatalytic activity. The OER activity of the electrocatalysts follows the order of S–CeO₂ (190 mV@10 mA cm⁻²), N– CeO₂ (220 mV @10 mA cm⁻²), P– CeO₂ (230 mV @10 mA cm⁻²), B–CeO₂ (250 mV @10 mA cm⁻²) and CeO₂ (260 mV @10 mA cm⁻²) in 1 M of KOH. From the kinetics analysis, Tafel slope value achieved for catalysts CeO₂, B–CeO_2, P–CeO₂, N–CeO₂ and S–CeO₂ are 142 mV dec⁻¹,121 mV dec⁻¹, 102 mV dec⁻¹, 98 mV dec⁻¹ and 83 mV dec⁻¹ respectively. These results validate that the S–CeO₂ electrode is prominent for OER performance with the requirement of cell voltage of 1.42 V at 10 mA cm⁻² current density. In addition, sulphur doped CeO₂ relatively have excellent stability through chrono-potentiometric analysis lasting for 20 h. Although the heteroatoms doped CeO₂ is acts as anode material, the preparation method is widespread, which will reduce the synthesis cost and streamline the preparation of electrode for OER. This research effort delivers a complete advantage for the development of robust, environmentally friendly and highly dynamic electrocatalysts for OER activity.     

Quick-to-synthesize hybrid electrodes composed of activated carbon cloth with Co/Fe-based films as bifunctional electrocatalysts for water splitting

Hybrid electrodes have recently been investigated as attractive alternatives to noble-metal-based electrocatalysts for hydrogen production by water splitting. Herein, we propose an electrode composed of an oxidized carbon cloth with an electrodeposited bimetallic Co/Fe-based film. By optimizing the electrodeposition conditions and applying electrochemically activated carbon cloth as a substrate, one can prepare a free-standing noble-metal-free electrocatalytic electrode with high bifunctional electrocatalytic activity in hydrogen and oxygen evolution from alkaline solution. The developed Fe_0.25Co_0.75 electrode requires overpotentials of 245 mV for HER and 360 mV for OER at high current densities of −100 and 100 mA cm⁻², respectively. Furthermore, its overall synthesis time from commercially available raw materials is only approximately 20 min. The electrode material was used as both a cathode and an anode in the model electrolyzer, which can deliver 10 mA cm⁻² of current density at 1.66 V without loss of activity during 100 h of performance.     

Co,N co-doped carbon nanosheets coupled with NiCo2O4 as an efficient bifunctional oxygen catalyst for Zn-air batteries

Developing of inexpensive and efficient bifunctional oxygen catalysts is important for the zinc-air batteries (ZABs). Here, a composite of Co, N co-doped carbon nanosheets coupled with NiCo₂O₄ (NiCo₂O₄/CoNC-NS) is developed as oxygen catalyst, which has good bifunctional oxygen catalytic activity and durability. Specifically, the half-wave potential of oxygen reduction reactions (ORR) is 0.849 V, and the overpotential of oxygen evolution reactions (OER) is 1.582 V at a current density of 10 mA cm⁻². And the assembled liquid ZABs based on NiCo₂O₄/CoNC-NS exhibit high open circuit potential (OCP, 1.482 V), high peak power density (148.3 mW cm⁻²) and large specific capacity (699.9 mAh g⁻¹) with long-term stability. Moreover, the further assembled solid ZABs can also provide high OCP (1.401 V), good power density (58.1 mW cm⁻²) and superior stability. This work would provide a good reference for the development of other advanced oxygen catalyst in future.     

Ag nanoparticle-loaded to MnO2 with rich oxygen vacancies and Mn3+ for the synergistically enhanced oxygen reduction reaction

MnO₂ is considered to be one of the most promising electrocatalysts for oxygen reduction reactions (ORR) in alkaline media and can be applied to various electrochemical energy conversion and storage devices. However, it is limited by the relatively slow kinetics of the cathodic electrochemical reactions. In addition, it is difficult to control the presence state of Ag during the modification of MnO₂. To this end, an efficient ORR electrocatalyst of Ag nanoparticles supported by MnO₂ nanorods was successfully synthesized by using NH₃·H₂O as a complexing agent to inhibit the Ag⁺ intercalating into the tunnels of MnO₂. The half-wave potential (E_1/2) and limiting current density (J_lim) of the obtained Ag/MnO₂ electrocatalysts are 0.81 V and −5.6 mA cm⁻², respectively, showing comparable ORR catalytic activity to commercial Pt/C catalysts. The excellent catalytic performances can be attributed to the presence of abundant oxygen vacancies and Mn³⁺ species on the MnO₂ surface, as well as the synergistic effect between MnO₂ substrates and Ag nanoparticles. Among them, oxygen vacancies enhances the adsorption of O₂, Mn³⁺ facilitates the displacement of O₂²⁻/OH⁻, MnO₂ inhibits the accumulation of peroxide species to improving the oxygen environment on the Ag surface and Ag accelerates the electron transfer in the whole process. This work provides a useful guide for the design of efficient Mn-based ORR electrocatalysts.     

A novel in-situ strategy develops for Mo2C nanoparticles incorporated on N,P co-doped stereotaxically carbon as efficient electrocatalyst for overall water splitting

Developing cost-effective and remarkable electrocatalysts toward oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) performs excelling role in boosting the hydrogen energy application. Herein, a novel in-situ one-pot strategy is developed for the first time to synthesize molybdenum carbide nanoparticles (Mo₂C NPs) incorporated on nitrogen (N) and phosphorous (P) co-doped stereotaxically carbon (SC). The optimized Mo₂C NPs/N, P–SC–800 electrocatalyst exhibits lower overpotentials of 131 and 287 mV for HER and OER to deliver a current density of 10 mA cm^?2 in 1.0 M KOH medium with smaller Tafel slopes of 58.9 and 74.4 mV/dec, respectively. In addition, an electrolyzer using Mo₂C NPs/N, P–SC–800 electrode as cathode and anode delivers a current density of 10 mA cm^?2 at a small voltage of 1.64 V for overall water splitting. The excellent water splitting performance could be ascribed to optimum Mo₂C NPs for more accessible active sites, highly active N, P-SC networks for accelerated electron transfers, and synergetic effect between Mo₂C NPs and N, P-SC networks. The N, P-SC network not only enhances the overall dispersion of Mo₂C NPs but also contributes numerous electroactive edges to enhance the performance of HER, OER, and overall water splitting activity. This research work explores the in-situ one-step strategies of advanced, cost-effective, and non-precious metal electrocatalysts for efficient water splitting and motivates the consideration of a novel class of heteroatom doped stereotaxically carbon nanocomposites for sustainable energy production.     

Amino functionalized carbon nanotubes supported CoNi@CoO–NiO core/shell nanoparticles as highly efficient bifunctional catalyst for rechargeable Zn-air batteries

Oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are the core reaction processes of rechargeable Zn-air battery (ZAB) cathode. Therefore, exploring a bifunctional catalyst with excellent electrochemical performance, high durability, and low cost is essential for rechargeable ZAB. In this work, amino functionalized carbon nanotubes supported core/shell nanoparticles composed of CoNi alloy core and CoO–NiO shell (CoNi@CoO–NiO/NH₂-CNTs-1) is synthesized through a simple and efficient hydrothermal reaction and calcination method, which shows higher ORR/OER bifunctional catalytic performance than the single metal-based catalyst, such as Ni@NiO/NH₂-CNTs and Co@CoO/NH₂-CNTs. The fabricated bimetallic alloy based catalyst CoNi@CoO–NiO/NH₂-CNTs-3 with the optimized loading content of CoNi@CoO–NiO core/shell nanoparticles, presents the best bifunctional catalytic performance for ORR/OER. Experimental studies reveal that CoNi@CoO–NiO/NH₂-CNTs-3 exhibits the onset potential of 0.956 V and 1.423 V vs. RHE for ORR and OER, respectively. It also exhibits a low overpotential of 377 mV to achieve a 10 mA cm^?2 current density for OER, and positive half-wave potentials of 0.794 V for ORR. And the potential difference between half-wave potential of ORR (E_1/2) and the potential at 10 mA cm^?2 for OER (E_j10) is 0.813 V. In addition, when CoNi@CoO–NiO/NH₂-CNTs-3 is used as an air electrode catalyst of rechargeable ZAB, its maximum power density and open circuit voltage (OCV) can reach 128.7 mW cm^?2 and 1.458 V (The commercially available catalyst of Pt/C–RuO₂ is 88.1 mW cm^?2), which strongly demonstrates that the fabricated catalyst CoNi@CoO–NiO/NH₂-CNTs-3 can be used as a highly efficient bifunctional catalyst for ZABs, and is expected to replace those expensive precious metal electrocatalysts to meet the growing demand for new energy devices.     

Promotional effects of trace Ni on its dual-functional electrocatalysis of Co/N-doped carbon nanotube catalysts for ORR and OER

It is still a great challenge for developing efficient dual-functional electrocatalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). The electrocatalysts are critical to enhance the efficiency of metal-air cells and fuel cells. In this study, a one-pot vapor deposition method was used to realize the synchronously dope of N and Ni (trace) into Co/C to form Co–Ni (trace)/N-doped carbon nanotubes (Co–Ni (trace)/NCNTs). An interesting result is that injecting dicyandiamide (DCD) into Ni foam as a precursor led to the in situ formation of NCNTs, with synchronous doping of trace Ni into Co species. The cooperative effects of the Co–Ni (trace) and N-doped carbon nanotubes resulted in superior dual-functional electrocatalytic performance of Co–Ni (trace)/NCNTs for the ORR (half-wave potential E_1/2 vs. RHE: 0.83 V, electron transfer number n: 3.97) and OER (overpotential vs. RHE: 337 mV at 10 mA cm^?2, Tafel slope: 94.0 mV dec^?1). Moreover, the Co–Ni (trace)/NCNTs catalyst showed excellent stability during 20,000 s of durability testing for both ORR and OER. This study provides a feasible strategy for designing efficient nonnoble metal-catalysts for renewable energy conversion devices.     

N,P-co-doped carbon coupled with CoP as superior electrocatalysts for hydrogen evolution reaction and overall water splitting

To achieve high activity and stability for both hydrogen and oxygen evolution reactions through the non-precious-metal based electrocatalysts is still facing the great challenge. Herein, we demonstrate a facile strategy to prepare CoP nanoparticles (NPs) loaded on N, P dual-doped carbon (NPC) electrocatalysts with high concentration N and P dopants through a pyrolysis-deposition-phosphidation process. The great bifunctional electrocatalytic activity for both HER (the overpotential of 98 mV and 86 mV at 10 mA cm⁻² in both 0.5 M H₂SO₄ and 1 M KOH electrolytes, respectively) and OER (the overpotential of 300 mV at 10  mA cm⁻² in 1 M KOH electrolyte) were achieved. When CoP@NPC hybrid was used as two electrodes in the 1 M KOH electrolyte system for overall water splitting, the needed cell potential for achieving the current density of 10 mA cm⁻² is 1.6 V, and it also showed superior stability for HER and OER after 10 h’ test with almost negligible decay. Experimental results revealed that the P atoms in CoP were the active sites for HER and the CoP@NPC hybrid showed excellent bifunctional electrocatalytic properties due to the synergistic effects between the high catalytic activity of CoP NPs and NPC, in which the doping of N and P in carbon led to a stronger polarization between Co and P in CoP, promoting the charge transfer from Co to P in CoP, enhancing the catalytic activity of P sites and Co sites in CoP for HER and OER, respectively. Specifically, the improvements could result from the changed charge state, the increased active specific surface area, and the facilitated reaction kinetics by N, P co-doping and admixture. This work provides a high-efficient, low-cost and stable electrocatalyst for overall water splitting, and throws light on rational designing high performance electrocatalysts.     

N,S co-doped NiCo2O4@CoMoO4/NF hierarchical heterostructure as an efficient bifunctional electrocatalyst for overall water splitting

Electrocatalytic overall water splitting technology has received considerable attention in recent years. The fabrication of low-cost, earth-rich and potent bifunctional electrocatalysts is vital for hydrogen evolution (HER) and oxygen evolution reactions (OER). Herein, the N and S co-doped NiCo₂O₄@CoMoO₄ heterostructures (N, S–NCO@CMO₄₀₀) are fabricated by CVD and hydrothermal methods. N and S atoms as auxiliary active centers can increase the activity of Ni, Co and Mo atoms at the same time. Hierarchical heterostructures generate more interfaces to accelerate mass transfer and enlarge the electrochemical surface area, which greatly enhances the catalytic activity. The catalyst displays outstanding OER performance. The overpotentials of OER and HER are 165 and 100 mV at a current density of 10 mA cm^?2, respectively. More importantly, the N, S–NCO@CMO₄₀₀-based water splitting cell has a low voltage of 1.46 V at 10 mA cm^?2. Furthermore, the N, S–NCO@CMO₄₀₀ runs for 120 h in stable operation. This work provides new ideas for the design of hierarchical heterostructures with two-element incorporation.     

Transitional metal alloyed nanoparticles entrapped into the highly porous N-doped 3D honeycombed carbon: A high-efficiency bifunctional oxygen electrocatalyst for boosting rechargeable Zn-air batteries

Rational development of low-cost, durable and high-performance bifunctional oxygen catalysts is highly crucial for metal-air batteries. Herein, transition metal alloyed FeCo nanoparticles (NPs) embedded into N-doped honeycombed carbon (FeCo@N-HC) was efficiently prepared by a one-step carbonization method in the existence of NH₄Cl and citric acid. Benefiting from the honeycomb-like architectures and the synergistic effects of the FeCo alloy with the doped-carbon matrix, the as-synthesized FeCo@N-HC exhibited outstanding oxygen reduction reaction (ORR) with the more positive onset potential (E_onset = 0.98 V vs. RHE) and half-wave potential (E_1/2 = 0.85 V vs. RHE), coupled with outstanding oxygen evolution reaction (OER) with the lower overpotential (318 mV) at 10 mA cm^?2. Besides, the home-made Zn-air battery has the larger power density of 144 mW cm^?2 than Pt/C + RuO₂ (80 mW cm^?2). This research offers some valuable guidelines for constructing robust oxygen catalysts in clean energy storage and conversion technologies.     

PBA derived FeCoP nanoparticles decorated on NCNFs as efficient electrocatalyst for water splitting

Transition metal phosphides have been known as promising electrocatalysts for hydrogen evolution and oxygen evolution reactions (HER and OER) due to their high catalytic activity. In this work, the FeCoP nanoparticles decorated on N-doped electrospun carbon nanofibers (FeCoP@NCNFs) was successfully synthesized through depositing Fe, Co-based Prussian blue analogue Co₃[Fe(CN)₆]₂·10H₂O (FeCo-PBA) onto the electrospun PVP/PAN nanofibers via layer-by-layer approach, followed by carbonization and phosphorization treatments. Benefiting from the high electrical conductivity, abundant catalytic active sites and the synergistic effect between FeCoP nanoparticles and N-doped carbon nanofibers network, the obtained FeCoP@NCNFs displays good bifunctional electrocatalytic activity. In 1 M KOH, the FeCoP@NCNFs achieves 10 mA cm^?2 at an overpotential of 290, 226 mV for OER and HER, respectively. Moreover, it demands overpotential of 196 mV to achieve 10 mA cm^?2 for HER in 0.5 M H₂SO₄. The FeCoP@NCNFs is used as both anode and cathode for overall water splitting, it requires a low voltage of 1.65 V to achieve a current density of 10 mA cm^?2 and maintains outstanding stability over 10 h. Herein, a strategy for preparing bifunctional electrocatalysts of compositing transition metal phosphides with carbon nanofibers is proposed, and the application of metal-organic framework in electrocatalytic field is further extended.     

Fe2O3 nanoparticles immobilized on N and S codoped C as an efficient multifunctional catalyst for oxygen reduction reaction and overall water electrolysis

Currently, multifunctional electrocatalysts with superior performance are very vital for developing various clean and regenerated energy systems. Herein, an effective multifunctional electrocatalyst comprising Fe₂O₃ nanoparticles immobilized on N and S codoped C has been synthesized via heat-treatment of Fe(II) complex at 800 °C (denoted as Fe₂O₃/NS-C-800). Favorable features including the introduction of maghemite nanoparticles, N/S-codoping effect, and close contact between the Fe₂O₃ nanoparticles and NS-C ender the Fe₂O₃/NS-C-800 with high multifunctional catalytic performance. The onset potential (0.97 V) and half-wave potential (0.81 V) of the Fe₂O₃/NS-C-800 towards oxygen reduction reaction (ORR) are comparable to Pt/C (0.99 and 0.82 V). The Fe₂O₃/NS-C-800 also exhibits high oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) activity with low OER and HER overpotentials of 0.37 and −0.27 V at 10 mA cm⁻², respectively. In addition, higher ORR, OER and HER stabilities than Pt/C are observed for the Fe₂O₃/NS-C-800. More importantly, the assembled water electrolyzer using the Fe₂O₃/NS-C-800 as the anode and cathode exhibits a high stability at a water electrolysis current density of 10 mA cm⁻². The present study offers a new promising non-noble multifunctional catalyst for future application in renewable energy technologies.     

Defective layered double hydroxide formed by H2O2 treatment act as highly efficient electrocatalytic for oxygen evolution reaction

Electrocatalytic reaction is the important electrode reaction for many new generation electrochemistry energy and storage devices. However, the poor reaction kinetics of those electrode reaction severely restricts its application. Highly efficient electrocatalyst is essential to resolve the problem of commercial application of those electrochemistry energy and storage devices. Herein, by simple H₂O₂ treatment, the highly efficient CoFe-Layered Double Hydroxides (LDHs) electrocatalysts with multiple defects have been synthesized (noted as D-LDHs). The D-LDHs show a low overpotential of 283 mV at 10 mA cm⁻² and small Tafel slope of 39 mV dec⁻¹ for the oxygen evolution reaction (OER). The work offers a new strategy to create defects in LDHs as highly efficient electrocatalysts for OER.     

Template-assisted polymerization-pyrolysis derived mesoporous carbon anchored with Fe/Fe3C and Fe−NX species as efficient oxygen reduction catalysts for Zn-air battery

Constructing highly efficient and durable non-noble metal modified carbon catalysts for oxygen reduction reaction (ORR) in the whole pH range is essential for energy conversion devices but still remains a challenge. Herein, the Fe/Fe₃C nanoparticles and Fe-N_X species anchored on the interconnected mesoporous carbon materials are fabricated through an economical and facile template-assisted polymerization-pyrolysis strategy. The catalyst exhibits unique features with the electronic interaction between Fe/Fe₃C and Fe−N_X, large specific surface area and high mesoporous structure as well as nitrogen doping in porous carbon skeletons, which can effectively catalyze ORR over the full pH range. In an alkaline electrolyte, the optimized catalyst displays favorable ORR performance with positive onset potential (E_onset = 0.91 V), half-wave potential (E_1/2 = 0.83 V), long-term cycles stability and methanol tolerance, exceeding those for the commercial Pt/C. Furthermore, the prepared catalyst could be directly assembled into the alkaline Zn−air battery that exhibits the open-circuit voltage of 1.44 V, high power density of 96.0 mW cm⁻² and long-term durability. Therefore, the template-assisted polymerization-pyrolysis strategy provides a promising route for designing high-performance non-noble metal decorated ORR electrocatalysts.