Ameliorated microstructure and hydrogen absorption/desorption properties of novel Mg–Ni–La alloy doped with MWCNTs and Co nanoparticles

Based on the positive influence of carbon materials and transition metals, a new type of Mg-based composites with particle size of ～800 nm has been designed by doping hydrogenated Mg–Ni–La alloy with multi-walled carbon nanotubes (MWCNTs) and/or Co nanoparticles. The microstructures, temperature related hydrogen absorption/desorption kinetics and dehydrogenation mechanisms are investigated in detail. The results demonstrate that MWCNTs and Co dispersedly distribute on the surface of Mg–Ni–La particles after high-energy ball milling due to powders’ repeated cold welding and tearing. The experimental samples exhibit improved hydrogen storage behaviors and the addition of MWCNTs and Co can further accelerate the de-/hydriding kinetics. For instance, the Mg–Ni–La–Co sample can absorb 3.63 wt% H₂ within 40 min at 343 K. Dehydrogenation analyses demonstrate that the positive effect of MWCNTs is more obvious than that of Co nanoparticles for the experimental samples. The addition of MWCNTs and Co leads to the average dehydrogenation activation energy of experimental samples decreasing to 82.1 and 84.5 kJ mol^?1, respectively, indicating a significant decrease of dehydrogenation energy barriers. In addition, analyses of dehydrogenation mechanisms indicate that the rate-limiting steps vary with the addition of MWCTNs and Co nanoparticles.     

The Mg/MAX-phase composite for hydrogen storage

The Mg/MAX-phase composite materials are synthesized by reactive ball milling (RBM) in a hydrogen gas atmosphere, and phase composition and dehydrogenation performance of the composites are investigated. The Ti₃AlC₂ MAX-phase markedly reduces the dehydrogenation temperature of the MgH₂ to 246 °C for the sample with 5 wt% of Ti₃AlC₂ MAX-phase and to 236 °C for the sample with 7 %wt. of Ti₃AlC₂ MAX-phase. The highest hydrogen capacity of 5.6 wt% was achieved for the Mg+7 wt% MAX-phase composite. The kinetic mechanism of the dehydrogenation of the composites is investigated by the Johnson-Mehl-Avrami-Kolmogorov (JMAK) technique.     

Cold-rolled magnesium hydride strips decorated with cold-sprayed Ni powders for solid-state-hydrogen storage

The present work reports for the first time application of cold spray coating for doping plastically deformed Mg-strips by different concentrations of fine Ni powders. For present study, Mg rods were cold-rolled for 300 passes and then coated by Ni fine powders, using a cold spray process operated at 150 °C under high argon gas pressure. The Ni powders were pelted into Mg-substrate through the high-velocity jet at a speed of 500 m/s. Under these preparation conditions, Ni powders were plastically deformed at the surface of Mg strips to create numerous pores and cavities, worked as hydrogen diffusion gateway. The as-coated Mg sheets with 3-Ni layers (5.28 wt%) possessed good hydrogenation/dehydrogenation kinetics, implied by a short absorption/desorption time (5.1/11 min) of 6.1 wt% hydrogen at 150 °C/10 bar and 200 °C/200 mbar, respectively. The fabricated solid-state hydrogen storage nanocomposite strips revealed good cyclability of achieving 600 cycles at 200 °C without failure of degradation.     

Synthesis of low-cost biomass charcoal-based Ni nanocatalyst and evaluation of their kinetic enhancement of MgH2

In this study, a low-cost biomass charcoal (BC)-based nickel catalyst (Ni/BC) was introduced into the MgH₂ system by ball-milling. The study demonstrated that the Ni/BC catalyst significantly improved the hydrogen desorption and absorption kinetics of MgH₂. The MgH₂ + 10 wt% Ni/BC-3 composite starts to release hydrogen at 187.8 °C, which is 162.2 °C lower than the initial dehydrogenation temperature of pure MgH₂. Besides, 6.04 wt% dehydrogenation can be achieved within 3.5 min at 300 °C. After the dehydrogenation is completed, MgH₂ + 10 wt% Ni/BC-3 can start to absorb hydrogen even at 30 °C, which achieved the absorption of 5 wt% H₂ in 60 min under the condition of 3 MPa hydrogen pressure and 125 °C. The apparent activation energies of dehydrogenation and hydrogen absorption of MgH₂ + 10 wt% Ni/BC-3 composites were 82.49 kJ/mol and 23.87 kJ/mol lower than those of pure MgH₂, respectively, which indicated that the carbon layer wrapped around MgH₂ effectively improved the cycle stability of hydrogen storage materials. Moreover, MgH₂ + 10 wt% Ni/BC-3 can still maintain 99% hydrogen storage capacity after 20 cycles. XRD, EDS, SEM and TEM revealed that the Ni/BC catalyst evenly distributed around MgH₂ formed Mg₂Ni/Mg₂NiH₄ in situ, which act as a “hydrogen pump” to boost the diffusion of hydrogen along with the Mg/MgH₂ interface. Meanwhile, the carbon layer with fantastic conductivity enormously accelerated the electron transfer. Consequently, there is no denying that the synergistic effect extremely facilitated the hydrogen absorption and desorption kinetic performance of MgH₂.     

Improvement of desorption performance of Mg(BH4)2 by two-dimensional Ti3C2 MXene addition

Magnesium borohydride (Mg(BH₄)₂) is an attractive materials for solid-state hydrogen storage due to its high hydrogen content (14.9 wt%). In the present work, the dehydrogenation performance of Mg(BH₄)₂ by adding different amounts (10, 20, 40, 60 wt%) of two-dimensional layered Ti₃C₂ MXene is studied. The Mg(BH₄)₂-40 wt% Ti₃C₂ composite releases 7.5 wt% hydrogen at 260 °C, whereas the pristine Mg(BH₄)₂ only releases 2.9 wt% hydrogen under identical conditions, and the onset desorption temperature decreases from 210 °C to a relative lower temperature of 82 °C. The special layered structure of Ti₃C₂ MXene and fluorine plays an important role in dehydrogenation process especially at temperatures below 200 °C. The main dehydrogenation reaction is divided into two steps, and activation energy of the Mg(BH₄)₂-40 wt% Ti₃C₂ composite is 151.3 kJ mol⁻¹ and 178.0 kJ mol⁻¹, respectively, which is much lower than that of pure Mg(BH₄)₂.     

Nanostructured hydrogen storage materials prepared by high-energy reactive ball milling of magnesium and ferrovanadium

Hydrogen storage nanocomposites prepared by high energy reactive ball milling of magnesium and vanadium alloys in hydrogen (HRBM) are characterised by exceptionally fast hydrogenation rates and a significantly decreased hydride decomposition temperature. Replacement of vanadium in these materials with vanadium-rich Ferrovanadium (FeV, V80Fe20) is very cost efficient and is suggested as a durable way towards large scale applications of Mg-based hydrogen storage materials. The current work presents the results of the experimental study of Mg–(FeV) hydrogen storage nanocomposites prepared by HRBM of Mg powder and FeV (0–50 mol.%). The additives of FeV were shown to improve hydrogen sorption performance of Mg including facilitation of the hydrogenation during the HRBM and improvements of the dehydrogenation/re-hydrogenation kinetics. The improvements resemble the behaviour of pure vanadium metal, and the Mg–(FeV) nanocomposites exhibited a good stability of the hydrogen sorption performance during hydrogen absorption – desorption cycling at T = 350 °C caused by a stability of the cycling performance of the nanostructured FeV acting as a catalyst. Further improvement of the cycle stability including the increase of the reversible hydrogen storage capacity and acceleration of H₂ absorption kinetics during the cycling was observed for the composites containing carbon additives (activated carbon, graphite or multi-walled carbon nanotubes; 5 wt%), with the best performance achieved for activated carbon.     

Enhancing hydrogen storage properties of the Mg/MgH2 system by the addition of bis(tricyclohexylphosphine)nickel(II) dichloride

This is a first report on the use of the bis(tricyclohexylphosphine)nickel (II) dichloride complex (abbreviated as NiPCy3) into MgH₂ based hydrogen storage systems. Different composites were prepared by planetary ball-milling by doping MgH₂ with (i) free tricyclohexylphosphine (PCy3) without or with nickel nanoparticles, (ii) different NiPCy3 contents (5–20 wt%) and (iii) nickel and iron nanoparticles with/without NiPCy3. The microstructural characterization of these composites before/after dehydrogenation was performed by TGA, XRD, NMR and SEM-EDX. Their hydrogen absorption/desorption kinetics were measured by TPD, DSC and PCT. All MgH₂ composites showed much better dehydrogenation properties than the pure ball-milled MgH₂. The hydrogen absorption/release kinetics of the Mg/MgH₂ system were significantly enhanced by doping with only 5 wt% of NiPCy3 (0.42 wt% Ni); the mixture desorbed H₂ starting at 220 °C and absorbed 6.2 wt% of H₂ in 5 min at 200 °C under 30 bars of hydrogen. This remarkable storage performance was not preserved upon cycling due to the complex decomposition during the dehydrogenation process. The hydrogen storage properties of NiPCy3-MgH₂ were improved and stabilized by the addition of Ni and Fe nanoparticles. The formed system released hydrogen at temperatures below 200 °C, absorbed 4 wt% of H₂ in less than 5 min at 100 °C, and presented good reversible hydriding/dehydriding cycles. A study of the different storage systems leads to the conclusion that the NiPCy3 complex acts by restricting the crystal size growth of Mg/MgH₂, catalyzing the H₂ release, and homogeneously dispersing nickel over the Mg/MgH₂ surface.     

The dehydrogenation kinetics and reversibility improvements of Mg(BH4)2 doped with Ti nano-particles under mild conditions

Magnesium borohydride, Mg(BH₄)₂, is ball-milled with Ti nano-particles. Such catalyzed Mg(BH₄)₂ releases more hydrogen than pristine Mg(BH₄)₂ does during isothermal dehydrogenation at 270, 280, and 290 °C. The catalyzed Mg(BH₄)₂ also exhibits better dehydrogenation kinetics than the pristine Mg(BH₄)₂. Based on kinetics model fitting, the activation energy (E_a) of the catalyzed Mg(BH₄)₂ is calculated to be lower than pristine Mg(BH₄)₂. During partial dehydrogenation, the catalyzed Mg(BH₄)₂ releases 4.23 wt % (wt%) H₂ for the second dehydrogenation at 270 °C, comparing to 4.05, and 3.75 wt% H₂ at 280, and 290 °C. The reversibility of 4.23 wt% capacity is also one of the highest for Mg(BH₄)₂ dehydrogenation under mild conditions such as 270 °C as reported. 4 cycles of Mg(BH₄)₂ dehydrogenation are conducted at 270 °C. The capacities degrade during 4 cycles and tend to be stable at about 3.0 wt% for the last two cycles. By analyzing the hydrogen de/absorption products of the catalyzed sample, Mg(BH₄)₂ is found to be regenerated after rehydrogenation according to Fourier Transform Infrared (FTIR) spectroscopy. Ti nano-particles can react with Mg(BH₄)₂ during ball-milling and de/rehydrogenation. The products include TiH_1.924, TiB, and TiB₂, which can improve the dehydrogenation properties of Mg(BH₄)₂ from a multiple aspect.     

Enhanced hydrogen storage kinetics in Mg@FLG composite synthesized by plasma assisted milling

Mg-based materials as potential hydrogen storage candidates, however, are suffering from sluggish kinetics during absorption and desorption processes. Here in this work, embedding Mg particles on few-layer graphene nanosheets (FLG) via dielectric barrier discharge plasma (DBDP) assisted milling was synthesized to improve hydrogen storage properties of Mg particles. The SEM observation demonstrates that Mg particles are distributed uniformly on the surface of the graphite layer in the Mg@FLG composite. The obtained Mg-based composite (Mg@FLG) shows a hydrogen storage capacity of ～5 wt%. From the isothermal dehydrogenation kinetic curves, the composite could desorb ～4.5 wt% hydrogen within 25 min at 300 °C. Compared with pure Mg, the dehydriding kinetics of the hydrogenated Mg@FLG composite is significantly elevated, showing an activation energy of 155 J/(mol·K). In addition, the dehydrogenation peak temperature of the Mg@FLG decreases dramatically from 431 to 329 °C for MgH₂. This work implies a promising composite formation technique in Mg-based materials to enhance hydrogen storage kinetics.     

Hydrogen desorption/absorption properties of the extensively cold rolled β Ti–40Nb alloy

β Ti–Nb BCC alloys are potential materials for hydrogen storage in the solid state. Since these alloys present exceptional formability, they can be processed by extensive cold rolling (ECR), which can improve hydrogen sorption properties. This work investigated the effects of ECR accomplished under an inert atmosphere on H₂ sorption properties of the arc melted and rapidly solidified β Ti40Nb alloy. Samples were crushed in a rolling mill producing slightly deformed pieces within the millimeter range size, which were processed by ECR with 40 or 80 passes. Part of undeformed fragments was used for comparison purposes. All samples were characterized by scanning electron microscopy, x-ray diffractometry, energy-dispersive spectroscopy, hydrogen volumetry, and differential scanning calorimetry. After ECR, samples deformed with 40 passes were formed by thick sheets, while several thin layers composed the specimens after 80 passages. Furthermore, deformation of β Ti–40Nb alloys synthesized samples containing a high density of crystalline defects, cracks, and stored strain energy that increased with the deformation amount and proportionally helped to overcome the diffusion's control mechanisms, thus improving kinetic behaviors at low temperature. Such an improvement was also correlated to the synergetic effect of resulting features after deformation and thickness of stacked layers in the different deformation conditions. At the room temperature, samples deformed with 80 passes absorbed ∼2.0 wt% of H₂ after 15 min, while samples deformed with 40 passes absorbed ∼1.8 wt% during 2 h, excellent results if compared with undeformed samples hydrogenated at 300 °C that acquired a capacity of ∼1.7 wt% after 2 h. The hydrogen desorption evolved in the same way as for absorption regarding the deformation amount, which also influenced desorption temperatures that were reduced from ∼270 °C, observed for the undeformed and samples deformed with 40 passes, to ∼220 °C, for specimens rolled with 80 passes. No significant loss in hydrogen capacity was observed in the cold rolled samples.     

Study on reversible hydrogen uptake and release of 1,2-dimethylindole as a new liquid organic hydrogen carrier

Indole derivatives have been considered as promising liquid organic hydrogen carriers (LOHCs) for onboard hydrogen storage applications. Here a new member of indole family, 1,2-dimethylindole (1,2-DMID), was reported as a potential liquid organic hydrogen carrier with a hydrogen storage content of 5.23 wt%, a meting point of 55 °C and a boiling point of 260 °C. Full hydrogenation and dehydrogenation of 1,2-DMID can be achieved with fast kinetics under mild conditions. The hydrogenation of 1,2-DMID followed the first order kinetics with an apparent activation energy of 85.1 kJ/mol. Dehydrogenation of fully hydrogenated product, octahydro-1,2-DMID was conducted over 5 wt% Pd/Al₂O₃ at 170–200 °C. The stored hydrogen can be completely released at 180 °C in 3 h and at 200 °C in 1 h. The energy barrier of dehydrogenation of octahydro-1,2-DMID was calculated to be 111.9 kJ/mol 3 times cycles of hydrogenation and dehydrogenation were employed to test the recycle ability of 1,2-DMID. The structures of intermediates were also discussed by means of Material Studio calculations.     

Air exposure improving hydrogen desorption behavior of Mg–Ni-based hydrides

It is well established that H₂O and O₂ have an inauspicious influence on hydrogen reactivity of hydrogen storage alloys. In this work, an unexpected improvement of the desorption behavior was discovered by just exposing the magnesium rich Mg–Ni hydrides into the air for a certain period. Upon an exposure duration of 4 months, the dehydrogenation peak and onset temperature were sharply lowered by 150 °C and 130 °C. Furthermore, the air-exposed sample could quickly absorb 3.08 wt% H₂ and desorb 2.81 wt% H₂ within 400 s at 300 °C. Besides the refinement of the powders due to the spontaneous hydrolysis reaction, the in-situ formed magnesium hydroxide layer and Ni are thought to be responsible for the remarkable improvement. This work gives interesting insights that the self-generating surface passivation is not necessarily harmful in the solid-state hydrogen storage area, especially for the cases where active sites of catalysis are present.     

Enhanced hydrogen desorption/absorption properties of magnesium hydride with CeF3@Gn

In order to improve the hydrogen storage performance of MgH₂, graphene and CeF₃ co-catalyzed MgH₂ (hereafter denoted as MgH₂+CeF₃@Gn) were prepared by wet method ball milling and hydriding, which is a simple and time-saving method. The effect of CeF₃@Gn on the hydrogen storage behavior of MgH₂ was investigated. The experimental results showed that co-addition of CeF₃@Gn greatly decreased the hydrogen desorption/absorption temperature of MgH₂, and remarkably improved the dehydriding/hydriding kinetics of MgH₂. The onset hydrogen desorption temperature of Mg + CeF₃@Gn is 232 °C，which is 86 °C lower than that of as-milled undoped MgH₂, and its hydrogen desorption capacity reaches 6.77 wt%, which is 99% of its theoretical capacity (6.84 wt%). At 300 °C and 200 °C the maximum hydrogen desorption rates are 79.5 and 118 times faster than that of the as-milled undoped MgH₂. Even at low temperature of 150 °C, the dedydrided sample (Mg + CeF₃@Gn) also showed excellent hydrogen absorption kinetics, it can absorb 5.71 wt% hydrogen within 50 s, and its maximum hydrogen absorption rate reached 15.0 wt% H₂/min, which is 1765 times faster than that of the undoped Mg. Moreover, no eminent degradation of hydrogen storage capacity occurred after 15 hydrogen desorption/absorption cycles. Mg + CeF₃@Gn showed excellent hydrogen de/absorption kinetics because of the MgF₂ and CeH_2-3 that are formed in situ, and the synergic catalytic effect of these by-products and unique structure of Gn.     

Improved desorption temperature of magnesium hydride via multi-layering Mg/Fe thin film

Hydrogen sorption property of Mg in Pd-capped thin film nanoconfined with Fe is investigated. Two methods of depositing the thin films were utilised, i.e., resistive heating method and pulsed laser deposition (PLD) method. In the thinnest Mg film prepared by resistive heating, hydrogen content was observed to be the highest among all samples and the hydrogen desorption temperature is 230 °C. Using pulsed laser deposition method, Mg/Fe nanoconfined multilayers are easily prepared. The hydrogen desorption temperature of Mg film with 12 Mg/Fe layers prepared via PLD method was significantly reduced to 155 °C, and the hydrogen storage capacity is improved as compared to the Mg/Fe with only several layers of same overall thickness. This study showed that the desorption temperatures correlate with the film thickness, thinner films react with hydrogen at lower temperatures. In addition, multi-layering Mg with Fe improves the desorption temperatures and hydrogen capacity, due to the higher grain boundary density, which acts as diffusion pathways for Pd in hydrogenation and dehydrogenation process.     

New mechanism and improved kinetics of hydrogen absorption and desorption of Mg(In) solid solution alloy milling with CeF3

This paper presents improving the hydrogen absorption and desorption of Mg(In) solid solution alloy through doped with CeF₃. A nanocomposite of Mg_0.95In_0.05-5 wt% CeF₃ was prepared by mechanical ball milling. The microstructures were systematically investigated by X-ray diffraction, scanning electron microscopy, scanning transmission electron microscopy. And the hydrogen storage properties were evaluated by isothermal hydrogen absorption and desorption, and pressure-composition-isothermal measurements in a temperature range of 230 °C–320 °C. The mechanism of hydrogen absorption and desorption of Mg_0.95In_0.05 solid solution is changed by the addition of CeF₃. Mg_0.95In_0.05-5 wt% CeF₃ nanocomposite transforms to MgH₂, MgF₂ and intermetallic compounds of MgIn and CeIn₃ by hydrogenation. Upon dehydrogenation, MgH₂ reacts with the intermetallic compounds of MgIn and CeIn₃ forming a pseudo-ternary Mg(In, Ce) solid solution, which is a fully reversible reaction with a reversible hydrogen capacity～4.0 wt%. The symbiotic nanostructured CeIn₃ impedes the agglomeration of MgIn compound, thus improving the dispersibility of element In, and finally improving the reversibility of hydrogen absorption and desorption of Mg(In) solution alloy. For Mg_0.95In_0.05-5 wt% CeF₃ nanocomposite, the dehydriding enthalpy is reduced to about 66.1 ± 3.2 kJ⋅mol⁻¹⋅H₂, and the apparent activation energy of dehydrogenation is significantly lowered to 71.9 ± 10.0 kJ⋅mol⁻¹⋅H₂, a reduction of ～73 kJ⋅mol⁻¹⋅H₂ relative to that for Mg_0.95In_0.05 solid solution. As a result, Mg_0.95In_0.05-5 wt% CeF₃ nanocomposite can release ～57% H₂ in 10 min at 260 °C. The improvements of hydrogen absorption and desorption properties are mainly attributed to the reversible phase transition of Mg(In, Ce) solid solution combing with the multiphase nanostructure.     

Facile synthesized Fe nanosheets as superior active catalyst for hydrogen storage in MgH2

Reversible hydrogen storage in MgH₂ under mild conditions is a promising way for the realization of “Hydrogen Economy”, in which the development of cheap and highly efficient catalysts is the major challenge. Herein, A two-dimensional layered Fe is prepared via a facile wet-chemical ball milling method and has been confirmed to greatly enhance the hydrogen storage performance of MgH₂. Minor addition of 5 wt% Fe nanosheets to MgH₂ decreases the onset desorption temperature to 182.1 °C and enables a quick release of 5.44 wt% H₂ within 10 min at 300 °C. Besides, the dehydrogenated sample takes up 6 wt% H₂ in 10 min under a hydrogen pressure of 3.2 MPa at 200 °C. With the doping of Fe nanosheets, the apparent activation energy of the dehydrogenation reaction for MgH₂ is reduced to 40.7 ± 1.0 kJ mol⁻¹. Further ab initio calculations reveal that the presence of Fe extends the Mg–H bond length and reduces its bond strength. We believe that this work would shed light on designing plain metal for catalysis in the area of hydrogen storage and other energy-related issues.     

Modifying the hydrogen storage performances of NaBH4 by catalyzing with MgFe2O4 synthesized via hydrothermal method

In this study, the hydrogenation performance of NaBH₄ was modified by the addition of 10 wt% MgFe₂O₄ as the catalyst. The NaBH₄ + 10 wt% of MgFe₂O₄ sample was prepared by a ball milling technique. The onset decomposition temperature of MgFe₂O₄-doped NaBH₄ was decreased to 323 °C and 483 °C for the first and second stage of dehydrogenation as compared to the milled NaBH₄ (497 °C). The desorption kinetics study showed that the addition of MgFe₂O₄ caused the sample to had faster hydrogen desorption with a capacity of 6.2 wt% within 60 min while the milled NaBH₄ had only released 5.3 wt% of hydrogen in the same period of time. For the isothermal absorption kinetics, the total amount of hydrogen absorbed by the milled NaBH₄ was 3.7 wt% while the NaBH₄ + 10 wt% MgFe₂O₄ sample showed better absorption characteristic with a total amount of 4.5 wt% of hydrogen within 60 min. The calculated desorption activation energy from the Kissinger plot of NaBH₄ + 10 wt% MgFe₂O₄ sample was 187 kJ/mol which reduced by 28 kJ/mol than the milled NaBH₄ (215 kJ/mol). The in-situ formation of MgB₆ and Fe₃O₄ after the dehydrogenation process indicates that these new species were responsible for the improved hydrogenation performances of NaBH₄.     

In-situ synthesis of amorphous Mg(BH4)2 and chloride composite modified by NbF5 for superior reversible hydrogen storage properties

The solvent-free amorphous Mg(BH₄)₂ composite was in-situ synthesized by ball milling LiBH₄ and MgCl₂. It is found that the onset dehydrogenation temperature of the as-synthesized composite is 126.9 °C, which is roughly 156 °C lower than that of pristine Mg(BH₄)₂. The activation energy of the amorphous Mg(BH₄)₂ and pristine Mg(BH₄)₂ for the first dehydrogenation step was calculated as 120.01 kJ/mol and 487.99 kJ/mol, respectively. Hence the kinetics improvement is certified by the lower E_a value of the dehydrogenation process. When adding NbF₅ into the composite, the catalyzed composite exhibits better hydrogen storage properties compared to pristine and amorphous Mg(BH₄)₂. The catalyzed composite starts to release hydrogen at proximately 120 °C with a total capacity of 10.04 wt%. The reversibility of the catalyzed composite is also improved. The capacity of the catalyzed composite at the second cycle is 5.5 wt%. For the third and fourth cycles the catalyzed composite can still liberate 4 wt% H₂. Besides, the onset hydrogen desorption temperature during four cycles are extremely lower than those of pristine and amorphous Mg(BH₄)₂. The peaks of the intermediate MgB₁₂H₁₂ is detected by FTIR as the regenerated hydrogenation product in the catalyzed composite. It can be speculated from the detailed analysis that there are mainly three reasons for the improved properties. Firstly, the additive NbF₅ is favorable to enhance the hydrogen storage properties by modifying the dehydrogenation path and producing MgF₂ and NbB₂ as new products. Secondly, the in-situ formation of amorphous Mg(BH₄)₂ is likely to improve the dehydrogenation properties of the samples due to its different reactivity comparing to crystal ones. Finally, LiCl can serve as buffer in the composite and thus improve the dehydrogenation properties.     

Room temperature conversion of Mg to MgH2 assisted by low fractions of additives

In recent works, it was noticed that Mg/MgH₂ mixed with additives by high energy ball milling allows temperature reductions of H₂ absorption/desorption without necessarily changing thermodynamic properties. Thus, the objective of this work was to investigate which additives, mixed in low fractions with MgH₂ powder would act as efficient hydrogen absorption/desorption catalysts at low temperatures, mainly at room temperature (RT). MgH₂ mixtures with 2 mol% additives (Fe, Nb₂O₅, TiAl and TiFe) were prepared by high energy reactive ball milling (RM). MgH₂–TiFe mixture showed the best results, both during desorption at 330 °C and absorption at RT. The hydrogen absorption was ≈ 2.67 wt% H₂ in 1 h and ≈ 4.44 wt% H₂ in 16 h (40% and 67% of maximum theoretical capacity, respectively). The MgH₂–TiFe superior performance was attributed to the hydrogen attraction by the created high energy interfaces and strong TiFe catalytic action facilitating the H₂ flow during Mg/MgH₂ reactions.     

Characterization of microstructure,hydrogen storage kinetics and thermodynamics of a melt-spun Mg86Y10Ni4 alloy

Ternary Mg₈₆Y₁₀Ni₄ alloy was successfully prepared by vacuum induction melting and subsequent melt-spinning technique. The phase composition and microstructure of the melt-spun and hydrogenated samples were characterized by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy measurements. The melt-spun alloy had an amorphous structure, and it transformed into nanocrystalline during the first hydrogenation process. The hydrogenated sample was composed of MgH₂, Mg₂NiH₄, YH₂, and a small amount of YH₃. The hydrogen absorption/desorption kinetics and thermodynamics were measured by Sievert's apparatus at various temperatures. It was found that the melt-spun Mg₈₆Y₁₀Ni₄ alloy could be fully activated after five hydrogenation and dehydrogenation cycles at 380 °C, and it exhibited a reversible gravimetric hydrogen storage capacity of about 5.3 wt%. The enhanced hydrogen sorption kinetics during the first few cycles can be attributed to the increased specific surface caused by the pulverization and cracking of the alloy particles. The activation energy for dehydrogenation reaction was determined to be 67 kJ/mol and 71 kJ/mol by using Arrhenius equation and Kissinger equation respectively. The thermodynamics of the sample was also evaluated by pressure–composition–isotherms, and the results shown that the enthalpy and entropy changes of Mg/MgH₂ transformation in the Mg₈₆Y₁₀Ni₄ alloy were slightly higher than that of pure Mg/MgH₂.