Composition dependent microstructure evolution,activation and de-/hydrogenation properties of Mg–Ni–La alloys

In this work, in order to elucidate the effect of different alloying elements on the microstructure, activation and the de-/hydrogenation kinetics performance, the Mg–20La, Mg–20Ni and Mg–10Ni–10La (wt.%) alloys have been prepared by near equilibrium solidification combined with high-energy ball milling treatment to realize the internal optimization as well as particle refinement. The results show that the microstructures of the prepared alloys are significantly refined by forming different types and sizes of intermetallic compounds. Meanwhile, the effects of LaH₃ and Mg₂Ni within the activated samples on de-/hydrogenation kinetics are also discussed. It is observed that the alloy containing LaH₃ preserves stable hydrogenation behavior between 573 and 623 K, while the hydrogenation properties of the alloy containing Mg₂Ni is susceptible to temperature. A preferable hydrogenation performance is observed in Mg–10Ni–10La alloy, which can absorb as high as 5.86 wt% hydrogen within 15 min at 623 K and 3.0 MPa hydrogen pressure. Moreover, the desorption kinetics and the desorption activation energies are evaluated to illustrate the mechanism based on improved dehydrogenation performance. The addition of proper alloying elements Ni and La in combination with reasonable processing is an effective strategy to improve the de-/hydrogenation performance of Mg-based alloys.     

Synthesis and hydrogenation properties of Mg–La–Ni–H system by reactive mechanical alloying

We have synthesized Mg–30 mass%LaNi_2.28 composite material and investigated its hydrogenation behaviour. The reactive mechanical alloying process of the mixture of Mg and LaNi_2.28 was studied. It is found that a composite of _MgH2${\mathrm{MgH}}_2$, _La4H12.9${\mathrm{La}}_4{\mathrm{H}}_{12.9}$ and _Mg2NiH4${\mathrm{Mg}}_2{\mathrm{NiH}}_4$ formed after 80 h ball-milling under 3.0 MPa hydrogen. Scanning electron microscopic analysis indicated that these new phases are distributed homogeneously. This composite shows excellent hydriding properties even at moderate temperature. Under 3.0 MPa hydrogen pressure it absorbed more than 80% of its full capacity in the temperature range of 473–553 K within less than 1 min. The maximum hydrogen absorption capacity at 553 K is 5.4 mass%. The enhanced hydriding properties could be attributed to the fine and uniform particles and a synergeticly catalytic effect generated by mechanical milling.     

Formation kinetics and microstructure of Mg–Ti hydrides made by reactive ball milling

In this work we report the formation kinetics and microstructural properties of Mg_1−xTi_x powder metal hydride systems (x = 0.1, 0.2, 0.3, 0.4, 0.5), obtained by reactive ball milling (RBM) via three different ways. The resulting MgH₂–TiH₂ nanocomposites are characterized and an optimal composition is found. Differences among the preparation routes are analyzed.     

Electrochemical hydrogen storage performance of Mg–Ti–Zr–Ni alloys

Mg_1.5Ti_0.5−xZr_xNi (x = 0, 0.1, 0.2, 0.3, 0.4), Mg_1.5Ti_0.3Zr_0.1Pd_0.1Ni and Mg_1.5Ti_0.3Zr_0.1Co_0.1Ni alloys were synthesized by mechanical alloying and their electrochemical hydrogen storage characteristics were investigated. X-ray diffraction studies showed that all the replacement elements (Ti, Zr, Pd and Co) perfectly dissolved in the amorphous phase and Zr facilitated the amorphization of the alloys. When the Zr/Ti ratio was kept at 1/4 (Mg_1.5Ti_0.4Zr_0.1Ni alloy), the initial discharge capacity of the alloy increased slightly at all the ball milling durations. The further increase in the Zr/Ti ratio resulted in reduction in the initial discharge capacity of the alloys. The presence of Zr in the Ti-including Mg-based alloys improved the cyclic stability of the alloys. This action of Zr was attributed to the less stable and more porous characteristics of the barrier hydroxide layer in the presence of Zr due to the selective dissolution of the disseminated Zr-oxides throughout the hydroxide layer on the alloy surface. Unlike Co, the addition of Pd into the Mg–Ti–Zr–Ni type alloy improved the alloy performance significantly. The positive contribution of Pd was assumed to arise from the facilitated hydrogen diffusion on the electrode surface in the presence of Pd. As the Zr/Ti atomic ratio increased, the charge transfer resistance of the alloy decreased at all the depths of discharges. Co and Pd were observed to increase the charge transfer resistance of the Mg–Ti–Zr–Ni alloys slightly.     

Hydrogen absorption and desorption kinetics of Ag–Mg–Ni alloys

The hydrogen absorption/desorption (A/D) kinetics of hydrogen storage alloys Mg_2−xAg_xNi (x=0.05, 0.1) prepared by hydriding combustion synthesis in two-phase (α–β) region in the temperature range of 523–$\text{573}\text{K}$ have been investigated. The hydriding/dehydriding (H/D) reaction rate constants were extracted from the time-dependent A/D curves. The obtained hydrogen A/D kinetic curves were fitted using various rate equations to reveal the mechanism of the H/D processes. The relationships of rate constant with temperature were established. It was found that the three-dimensional diffusion process dominates the hydrogen A/D. The apparent activation energies of 63±5 and $\text{61±7}\text{kJ/mol}\text{H}{}_2$ in Mg_1.95Ag_0.05Ni alloy and $\text{52±2}\text{kJ/mol}\text{H}{}_2$ and of $\text{50±2}\text{kJ/mol}\text{H}{}_2$ in Mg_1.9Ag_0.1Ni alloy were found for the H/D processes in two-phase (α–β) coexistence region from 523 to $\text{573}\text{K}$, respectively. With the increasing content of Ag in Ag–Mg–Ni alloys, the apparent energy was decreased and the reaction rate was faster. It is reasonable to explain that the hydriding kinetics of Mg₂Ni was improved by adding Ag.     

Hydrogenation and electrochemical studies of La–Mg–Ni alloys

La–Mg–Ni alloys are potential candidates for hydrogen storage materials. In this study, mechanical alloying with subsequent annealing under an argon atmosphere at 973 K for 0.5 h, were used to produce La_2-xMg_xNi₇ alloys (x = 0, 0.25, 0.5, 0.75, 1). Shaker type ball mill was used. An objective of the present study was to investigate an influence of amount of Mg in alloy on electrochemical, hydrogenation and dehydrogenation properties of La–Mg–Ni materials. X-ray diffraction analyses revealed formation of material with multi-phase structure. Obtained materials were studied by a conventional Sievert's type device at 303 K. It was observed that electrochemical discharge capacity and gaseous hydrogen storage capacity of La–Mg–Ni alloys increases with Mg content to reach maximum for La_1.5Mg_0.5Ni₇ alloy. Moreover, all of La–Mg–Ni alloys were characterized by improved hydrogen sorption kinetics in comparison to La–Ni alloy.     

Effect of Sm on hydrogen storage performance of La–Sm–Mg–Ni alloys

Abstract

In this study, Sm was adopted in order to completely replace the expensive Pr/Nd elements in the A2B7 type alloy. The results indicate that Sm is a favourable element for forming Ce2Ni7 type and Ce5Co19 type phases. With the increasing amount of Sm, the discharge capacity of the alloy retains a value of 283·3 mAh g^?1 at the current density of 1200 mA g^?1. The maximum discharge capacity of the alloys increases with the increasing Sm content when Mg content is relatively low. By optimising the composition and processing technology, the cycle life the alloy enhances from 74 cycles to more than 540 cycles, and the maximum discharge capacity also increases from 300 to 355 mAh g^?1.     

Ameliorated microstructure and hydrogen absorption/desorption properties of novel Mg–Ni–La alloy doped with MWCNTs and Co nanoparticles

Based on the positive influence of carbon materials and transition metals, a new type of Mg-based composites with particle size of ～800 nm has been designed by doping hydrogenated Mg–Ni–La alloy with multi-walled carbon nanotubes (MWCNTs) and/or Co nanoparticles. The microstructures, temperature related hydrogen absorption/desorption kinetics and dehydrogenation mechanisms are investigated in detail. The results demonstrate that MWCNTs and Co dispersedly distribute on the surface of Mg–Ni–La particles after high-energy ball milling due to powders’ repeated cold welding and tearing. The experimental samples exhibit improved hydrogen storage behaviors and the addition of MWCNTs and Co can further accelerate the de-/hydriding kinetics. For instance, the Mg–Ni–La–Co sample can absorb 3.63 wt% H₂ within 40 min at 343 K. Dehydrogenation analyses demonstrate that the positive effect of MWCNTs is more obvious than that of Co nanoparticles for the experimental samples. The addition of MWCNTs and Co leads to the average dehydrogenation activation energy of experimental samples decreasing to 82.1 and 84.5 kJ mol^?1, respectively, indicating a significant decrease of dehydrogenation energy barriers. In addition, analyses of dehydrogenation mechanisms indicate that the rate-limiting steps vary with the addition of MWCTNs and Co nanoparticles.     

The effects of Si and expanded PTFE substrates on formation and hydrogenation of Mg and Mg–Ti films

In this work, we investigated how DC and pulsed DC Ar gas plasma treatment changes surface topography and chemical composition of silicon and expanded Polytetrafluoroethylene (ePTFE) substrates and how different surface pretreatment techniques can affect the formation and hydrogenation of Mg and Mg–Ti films. It is observed that pre-treating Si and ePTFE substrates with different plasma modes results in significant changes of microstructures of as-deposited Mg and Mg–Ti films. After the hydrogenation of Mg films at 20 bar H₂ pressure and 180 °C temperature the formation of crystalline MgH₂ phase is observed only for the films deposited on plasma non-treated Si substrates which had the films with smallest dimensions of its columnar structure. It is known that, usually, Ti additives has positive effect on hydrogenation properties of Mg, but in this study independently of the used substrate pre-treatment technique after the hydrogenation of Mg–Ti films their XRD analysis showed no peaks of the crystalline hydride phase. However, depending on the surface properties of the substrate after hydrogenation Mg–Ti films also have several disparities which are discussed and attributed to the potentially related substrate features.     

Effect of Mo–Ni treatment on electrochemical kinetics of La–Mg–Ni-based hydrogen storage alloys

In order to improve kinetic properties of La–Mg–Ni-based hydrogen storage alloys, Mo–Ni treatment was applied to La_0.88Mg_0.12Ni_2.95Mn_0.10Co_0.55Al_0.10 alloy powders. FESEM results showed that after Mo–Ni treatment some network-shaped substance with nano-size formed on the surface of the alloy particles. The EDS results revealed increase in Ni content and emerge of Mo element. EIS and Linear polarization showed that charge-transfer resistance decreased and exchange current density increased for the treated alloy electrode, and the high rate dischargeability (HRD) was consequently improved. HRD at 1500 mA/g increased from 22.5% to 39.5%. Mo- and Ni-single treatments were performed compared with the Mo–Ni treatment, and the results showed that the single treatment improved HRD slightly, far less than the Mo–Ni treatment.     

Hydrogen storage thermodynamics and kinetics of RE–Mg–Ni-based alloys prepared by mechanical milling

The nanocrystalline/amorphous NdMg₁₁Ni + x wt.% Ni (x = 100, 200) composite hydrogen storage alloys were synthesized by ball milling, and the effects of Ni content and milling time on the hydrogen storage thermodynamics and dynamics of the alloys were systematically investigated. The results reveal that the variation of the Ni content has a slight effect on the thermodynamic properties of the alloys, but it significantly improves their absorption and desorption kinetics performance. The variation of the milling time clearly affects the hydrogen storage properties of the alloys. Hydrogen absorption capacity and hydrogen absorption saturation ratio have maximum values with milling time varying. But hydrogen desorption ratio always increases with milling time prolonging. It is found that the hydrogen desorption activation energy of the alloys clearly decreases with increasing Ni content and milling time, which is responsible for the improved hydrogen desorption kinetics of the alloys.     

Combinatorial search for hydrogen storage alloys: Mg–Ni and Mg–Ni–Ti

A combinatorial study was carried out for hydrogen storage alloys involving processes similar to those normally used in their fabrication. The study utilized a single sample of combined elemental (or compound) powders which were milled and consolidated into a bulk form and subsequently deformed to heavy strains. The mixture was then subjected to a post annealing treatment, which brings about solid state reactions between the powders, yielding equilibrium phases in the respective alloy system. A sample, comprising the equilibrium phases, was then pulverized and screened for hydrogen storage compositions. X-ray diffraction was used as a screening tool, the sample having been examined both in the as processed and the hydrogenated state. The method was successfully applied to Mg–Ni and Mg–Ni–Ti yielding the well known Mg₂Ni as the storage composition. It is concluded that a partitioning of the alloy system into regions of similar solidus temperature would be required to encompass the full spectrum of equilibrium phases.     

EXAFS investigation of the destabilization of the Mg–Ni–Ti (H) system

Ti doping destabilizes the Mg₂NiH₄ system, reducing the hydrogenation enthalpy from – 64 kJ/(mol H₂) to around – 40 kJ/(mol H₂). However, the equilibrium pressure is hardly affected, as also the entropy of reaction changes. To understand this thermodynamic behavior it is essential to understand the structure of the phases present in the Ti-doped Mg₂Ni system in metallic and hydrogenated state. We used Extended X-ray Absorption Fine Structure (EXAFS) to investigate the local coordination of Ni and Ti atoms in Mg–Ni–Ti thin films both in the as-prepared as well as in the hydrogenated state. In the as-prepared state two phases, Mg₂Ni and TiNi or TiNi₃, are formed, which transform in a single Ti-doped Mg₂NiH₄ phase in the hydrogenated state. These results are consistent with previous DFT calculations for this system.     

Influence of Pd addition on the electrochemical performance of Mg–Ni–Ti–Al-based metal hydride for Ni–MH batteries

Amorphous Mg_0.9Ti_0.1NiAl_0.05 and Mg_0.9Ti_0.1NiAl_0.05Pd_0.1 alloys were prepared by high energy ball milling and evaluated as metal hydride electrodes for Ni–MH batteries. The Mg_0.9Ti_0.1NiAl_0.05Pd_0.1 alloy showed a much higher cycle life with a capacity retention of 72% after 100 cycles (C_100th = 288 mAh g⁻¹) compared to 26% for the Pd-free alloy (C_100th = 117 mAh g⁻¹). This was mainly attributed to the improvement of the alloy oxidation resistance in KOH electrolyte with Pd addition, as confirmed by cyclic voltammetry experiments and X-ray diffraction analyses on cycled electrodes. In addition, in situ acoustic emission (AE) measurements revealed that the energy of the AE signals related to the particle cracking is lower for the Mg_0.9Ti_0.1NiAl_0.05Pd_0.1 electrode, suggesting that the cracks are smaller in size than with the Pd-free alloy. The Mg_0.9Ti_0.1NiAl_0.05Pd_0.1 electrode also displayed a higher discharge rate capability than the Mg_0.9Ti_0.1NiAl_0.05 electrode. On the basis of their respective electrochemical pressure–composition isotherm, it was shown that the presence of Pd in the alloy decreases the thermodynamic stability of the metal hydride. Through a comparative analysis of discharge polarization curves, it was also shown that Pd addition decreases substantially the H-diffusion resistance in the alloy whereas its positive effect on the charge-transfer resistance is limited.     

Thermodynamic and microstructural basis for the fast hydrogenation kinetics in Mg–Mg2Ni-carbon hybrids

Mg-based hybrids have shown promise via enhanced hydrogen storage properties. The Mg–Mg₂Ni-carbon hybrid can be synthesized by accumulative roll bonding (ARB), which is amenable to ‘scaled-up’ synthesis. In spite of the ‘bulk’ nature of the samples synthesized, they display fast kinetics of absorption and desorption of hydrogen. In the current work, we try to comprehend the basis for the same in terms of the activation energy of the underlying processes involved; via desorption curves (wt.% H - time curves) in a Sievert's apparatus and differential scanning calorimetry (heat evolved - T plots). Analysis invoking the Johnson-Mehl-Avrami model and Kissinger plots show that the significantly reduced activation energy for the dehydrogenation process in the hybrid is responsible for the rapid kinetics. It is evinced that admixing the additives with Mg, coupled with fine scale microstructure rich in interfaces is responsible for the fast kinetics. It is established that the rate limiting step for hydrogen desorption is interface migration and not the diffusion of hydrogen, which is governed by the JMA-3D model.     

The compressibility of the La–Mg–Ni alloy system

We measured the compressibility of La₂Mg₁₆Ni, LaMg₂Ni, LaMg₃, and γ-La to 30.1 GPa by synchrotron X-ray diffraction. The bulk moduli are respectively determined to be 54, 67, 57, and 47.5 GPa. The strengthening of the compounds by the addition of nickel is insignificant. The compressibility is dominantly determined by that of La and Mg. The strength increases of the compounds relative to pure La and Mg elements is comparable to that caused by solid solution strengthening.     

Mechanisms of hydrides’ nucleation and the effect of hydrogen pressure induced driving force on de-/hydrogenation kinetics of Mg-based nanocrystalline alloys

Aiming to gain insight on the hydrogen storage properties of Mg-based alloys, partial hydrogenation and hydrogen pressure related de-/hydrogenation kinetics of Mg–Ni–La alloys have been investigated. The results indicate that the phase boundaries, such as Mg/Mg₂Ni and Mg/Mg₁₇La₂, distributed within the eutectics can act as preferential nucleation sites for β-MgH₂ and apparently promote the hydrogenation process. For bulk alloy, it is observed that the hydrogenation region gradually grows from the fine Mg–Ni–La eutectic to primary Mg region with the extension of reaction time. After high-energy ball milling, the nanocrystalline powders with crystallite size of 12～20 nm exhibit ameliorated hydrogen absorption/desorption performance, which can absorb 2.58 wt% H₂ at 368 K within 50 min and begin to desorb hydrogen from ～508 K. On the other side, variation of hydrogen pressure induced driving force significantly affects the reaction kinetics. As the hydrogenation/dehydrogenation driving forces increase, the hydrogen absorption/desorption kinetics is markedly accelerated. The dehydrogenation mechanisms have also been revealed by fitting different theoretical kinetics models, which demonstrate that the rate-limiting steps change obviously with the variation of driving forces.     

Ageing of Mg–Ni–H hydrogen storage alloys

In this work, ageing of Mg/Mg₂Ni mixtures was investigated. It was observed that hydrogen desorption kinetics from hydrided Mg/Mg₂Ni was improved considerably after ageing at room temperature for several days. The ageing was interpreted in terms of phase changes. Even after almost complete hydridation, besides two main phases – MgH₂ and Mg₂NiH₄ – a certain amount of Mg₂NiH_0.3 was always present. Similar as Mg₂NiH₄ phase, Mg₂NiH_0.3 islands were located on the surface of MgH₂ grains. Mg₂NiH_0.3 transformed into Mg₂NiH₄ at the expense of hydrogen from an adjoining MgH₂ grain. In such a way, a clean double layer (Mg)–Mg₂NiH₄ was formed, acting as a gate for easy hydrogen desorption from MgH₂. It was found that the Mg₂NiH₄ phase was slightly enriched on non-twinned modification LT1 during the ageing. As a result, both the creation of (Mg)–Mg₂NiH₄ desorption bridges and enrichment of Mg₂NiH₄ on LT1 during the ageing facilitated onset of rapid hydrogen desorption.     

Influence of adding graphene on the hydrogen storage thermodynamics and kinetics of as-milled CeMg12–Ni alloy

Graphene can been used to improve the hydrogen storage performance of magnesium based materials because of its outstanding electrical conductivity, high specific surface area, and good mechanical qualities. In this paper, mechanical ball milling method was utilized to prepare the CeMg₁₂/Ni alloy combined with graphene in order to investigate the impact of graphene on microstructure, kinetics, and thermodynamic properties of alloy. The results reveal that the addition of graphene can refine the grains of alloy, increase the surface defects of alloy particles and promote Ni to be dissolved in the main phase of the alloy. The absolute value of enthalpy drops from 65.27 kJ/mol to 60.3 kJ/mol when Graphene is added at a higher concentration. The addition of graphene improves the dehydrogenation performance of alloy hydride by lowering its thermal stability. Because of a minimum dehydrogenation activation energy of 85.23 kJ/mol and dehydrogenation characteristic time of 1090s, the alloy with 6 wt% Graphene exhibits the best dehydrogenation kinetic performances.